Preparation of new water‐soluble chitosan containing hyperbranched‐vinylsulfonic acid sodium salt and their antimicrobial activities and chelation with metals

In this work, an efficient and simple method to graft a vinylsulfonic acid sodium salt on a poorly water‐soluble chitosan is described. Commercially available low molecular weight chitosan is converted to water‐soluble chitosan containing hyperbranched‐vinylsulfonic acid sodium salt groups. The process comprises the following steps: Michael addition of methyl acrylate, amidation with ethylenediamine, and Michael addition of vinylsulfonic acid sodium salt. A variety of chitosans containing vinylsulfonic acid sodium salt, with improved water solubility, is synthesized by repeating these three steps. The new chitosan derivatives show better antimicrobial activity against Micrococcus luteus ATCC 10240 and Achromobacter xylosoxidans ATCC 2706. In addition, they display better chelating behavior with heavy metals, like cadmium(II), copper(II), and nickel(II), than the starting chitosan. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Antibacterial activity of cationically modified cotton fabric with carboxymethyl chitosan

A water‐soluble carboxymethyl chitosan was prepared with a view to develop a multifunctional finish on cotton. Carboxymethyl chitosan (CMCTS) was synthesized by chemical reaction of chitosan with monochloroacetic acid under alkaline condition. The water soluble CMCTS was applied to cationized cotton with different concentrations. The treated fabrics were characterized through monitoring the textile physical properties and for the antibacterial activity against Escherichia coli DSMZ 498 and Micrococcus luteus ATCC 9341. The results obtained show that the physical properties of the treated fabrics are improved by increasing the CMCTS concentration, as well as the antibacterial activity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of amphiphilic chitosan and their antimicrobial activities

Two anionic soluble monomers, mono(2‐methacryloyl oxyethyl)acid phosphate and vinylsulfonic acid sodium salt, were grafted onto chitosan to obtain copolymers with zwitterionic property. Graft reaction improved the antimicrobial activities of chitosan. Antimicrobial activities of chitosan and graft copolymers depended largely on the amount and type of grafted chains as well as changes of pH, against Candida albicans, Trichophyton rubrum, and Trichophyton violaceum. The most excellent antimicrobial activity among tested samples was shown at pH 5.75 with demonstrating strain selectivity against Candida albicans and Trichophyton violaceum due to the difference in affinity between cell wall of fungi and chitosan or its derivatives. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1713–1719, 1999     

A synthesis of O-diethylaminoethyl chitosan and its binding ability of cholate and deoxycholate anion in vitro

Summary The aim of this study was to investigate the bile salts adsorption behavior of the diethylaminoethyl (DEAE)-chitosan, in vitro. In order to prepare the DEAE-chitosan, where the DEAE groups are specifically introduced onto 6-OH groups of chitosan with minimal by-product, DEAE-chitin was prepared by reacting chitin with N,N-diethylaminoethyl chloride, and direct N-deacetylation of DEAE-chitin was carried out in 10% of an aqueous sodium hydroxide solution containing sodium borohydride. DEAE chitosan samples were incubated with cholic acid sodium salt and deoxycholic acid sodium salt in a tromethane buffer solution (pH 7.5) for 1 hour, and the bile salts adsorption performances of the samples were examined by HPLC. The modified chitosan samples showed improved bile salts adsorption performances compared to chitosan, and the absorption amount of bile salt to the samples increased with increase in the DEAE groups introduced. In most cases, the adsorption amount of deoxycholate to the samples was greater than that of cholate. Received: 25 August 1998/Revised version: 16 November 1998/Accepted: 25 November 1998     

Properties of modified poly(vinyl alcohol) membranes prepared by the grafting of new polyelectrolyte copolymers for water–ethanol mixture separation

For the preparation of a water‐selective membrane for the pervaporation separation of an azeotropic solution, a series of grafted copolymers were synthesized by the reaction of poly(vinyl alcohol) (PVA) with poly(sodium salt styrene sulfonic acid‐co‐maleic acid) (PSStSA‐co‐MA). The esterification was performed between the hydroxyl groups of PVA and the carboxylic groups of the copolymer with a heat treatment. PSStSA‐co‐MA was prepared with sodium salt styrene sulfonic acid and maleic anhydride copolymerization in dimethyl sulfoxide with azobisisobutyronitrile as an initiator. The reaction mechanism and resultant structure were confirmed with IR spectra. The effect of the heat‐treatment time on the gel content was investigated. The permeation flux decreased and the separation factor increased as the crosslinking agent content rose. A membrane containing 15 wt % PSStSA‐co‐MA was used for water–ethanol azeotropic solution pervaporation at 30°C, and a flux of 0.43 kg/m² h and a separation factor of 190 were obtained. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2854–2859, 2002     

Study of the synthesis of chitosan derivatives containing benzo‐21‐crown‐7 and their adsorption properties for metal ions

Three new chitosan crown ethers, N‐Schiff base‐type chitosan crown ethers (I, III), and N‐secondary amino type chitosan crown ether (II) were prepared. N‐Schiff base‐type chitosan crown ethers (I, III) were synthesized by the reaction of 4′‐formylbenzo‐21‐crown‐7 with chitosan or crosslinked chitosan. N‐Secondary amino type chitosan‐crown ether (II) was prepared through the reaction of N‐Schiff base type chitosan crown ether (I) with sodium brohydride. Their structures were characterized by elemental analysis, infrared spectra analysis, X‐ray diffraction analysis, and solid‐state ¹³C NMR analysis. In the infrared spectra, characteristic peaks of C?N stretch vibration appeared at 1636 cm^?1 for I and 1652 cm^?1 for II; characteristic peaks of N? H stretch vibration appeared at 1570 cm^?1 in II. The X‐ray diffraction analysis showed that the peaks at 2θ = 10° and 28° disappeared in chitosan derivatives I and III, respectively; the peak at 2θ = 10° disappeared and the peak at 2θ = 28° decreased in chitosan‐crown ether II; and the peak at 2θ = 20° decreased in all chitosan derivatives. In the solid‐state ¹³C NMR, characteristic aromatic carbon appeared at 129 ppm in all chitosan derivatives, and the characteristic peaks of carbon in C?N groups appeared at 151 ppm in chitosan crown ethers I and III. The adsorption and selectivity properties of I, II, and III for Pd²⁺, Au³⁺, Pt⁴⁺, Ag⁺, Cu²⁺, and Hg²⁺ were studied. Experimental results showed these adsorbents not only had good adsorption capacities for noble metal ions Pd²⁺, Au³⁺, Pt⁴⁺, and Ag⁺, but also high selectivity for the adsorption of Pd²⁺ with the coexistence of Cu²⁺ and Hg²⁺. Chitosan‐crown ether II only adsorbs Hg²⁺ and does not adsorbs Cu²⁺ in an aqueous system containing Pd²⁺, Cu²⁺, and Hg²⁺. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1886–1891, 2002     

Photoinitiating polymerization to prepare biocompatible chitosan hydrogels

Chitosan hydrogels were prepared from water soluble chitosan derivatives (chitosan‐MA‐LA, CML) by photoinitiating polymerization under the existence of Irgacure2959 and the irradiation of UV light. The CML was obtained by amidation of the amine groups of chitosan with lactic acid and methacrylic acid. Gelation time of the hydrogel could be adjusted within a range of 5–50 min, and controlled by factors such as the degree of MA substitution, initiator concentration, existence of oxygen, and salt. The dry hydrogel adsorbed tens to hundred times of water, forming a highly hydrated gel. The swelling ratio was smaller at the higher degree of MA substitution, higher pH, and higher salt concentration. Rheological test showed that the hydrogel is elastomeric in the measuring frequency range, with a storage modulus and loss modulus of 0.8–7 kPa and 10–100 Pa, respectively. In vitro culture of chondrocytes demonstrated that the cells could normally proliferate in the extractant of the hydrogels, showing no cytotoxicity at lower initiator concentration. By contrast, the extractant of the hydrogel made by the redox initiating system, i.e., ammonium persulfate (APS) and N,N,N′,N′‐tetramethylethylenediamine (TEMED), showed apparent cytotoxicity. Thus, the chitosan hydrogels initiated by the Irgacure2959 have better comprehensive properties, in particular better biocompatibility, and are more suitable for biomedical applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Chitosan N-benzyl sulfonate derivatives as sorbents for removal of metal ions in an acidic medium

We synthesized chitosan-based sorbents for the uptake of metal cations in acidic solutions. Chitosan was reacted with 2-formylbenzene sodium sulfonate and 4-formyl-1,3-benzene sodium disulfonate in the presence of NaCNBH₃ to yield N-benzyl mono- and disulfonate derivatives of chitosan. IR and NMR spectra confirmed the presence of benzyl sulfonate groups. The degrees of substitution of the monosulfonate chitosan derivatives were in the range of 80%, while those of disulfonate derivatives were about 50%. These sulfonate derivatives of chitosan were tested on the sorption of heavy metals Cd²⁺, Zn²⁺, Ni²⁺, Pb²⁺, Cu²⁺, Fe³⁺, and Cr³⁺. The sorption capacities for disulfonate compounds were better than for monosulfonate compounds. This phenomenon was attributed to the amphoteric character of the monosulfonate derivatives. To improve the capacity of adsorption of monosulfonate compounds, the amino groups of these compounds were protected by the benzyloxycarbonyl groups. The protection of amino groups of disulfonate derivatives by benzyloxycarbonyl also improved their sorption capacity. The resulting protected polymers were tested for sorption of heavy metals. Both protected polymers were more efficient than are the parent nonprotected polymers. The synthesized sulfonate derivatives of chitosan are especially adapted to the sorption of heavy metals from the acidic industrial effluents. © 1996 John Wiley & Sons, Inc.     

Preparation,characterization, structure,and dynamics of carboxymethyl chitosan grafted with acrylic acid sodium salt

Graft copolymerization of different vinyl monomers onto chitosan (Cs) and its derivatives can alter their properties and consequently expands their potential applications. In this study, carboxymethyl chitosan (CMCs) was prepared and characterized. Graft copolymerization of acrylic acid sodium salt (AAs) onto CMCs was accomplished by using ammonium persulphate (APS)‐induced free radical polymerization in aqueous medium under nitrogen atmosphere. Occurrence of grafting was confirmed and the effects of [AAs], [APS], reaction time, and temperature on the extent of grafting were studied. The influence of grafting yield on the structure and dynamics was also investigated by using differential scanning calorimetry (DSC), two‐dimensional wide‐angle X‐ray scattering (2D‐WAXS), scanning electron microscopy (SEM), and dielectric spectroscopy. Preliminary study, using dielectric spectroscopy, was carried out to the CMCs‐g‐AAs copolymer with grafting percent ～ 2900%, as an example, in a wide range of temperature (from 299 to 473 K) and frequency (from 1 × 10^?2 to 1 × 10⁵ Hz). One relaxation process with Arrhenius type was detected. This process has the characteristics of a secondary relaxation process related to local chain dynamics with activation energy of 53 ± 3 kJ/mol. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Grafting of poly(3‐hydroxyalkanoate) and linoleic acid onto chitosan

Poly(3‐hydroxy octanoate) (PHO), poly(3‐hydroxy butyrate‐co‐3‐hydroxyvalerate) (PHBV), and linoleic acid were grafted onto chitosan via condensation reactions between carboxylic acids and amine groups. Unreacted PHAs and linoleic acid were eliminated via chloroform extraction and for elimination of unreacted chitosan were used 2 wt % of HOAc solution. The pure chitosan graft copolymers were isolated and then characterized by FTIR, ¹³C‐NMR (in solid state), DSC, and TGA. Microbial polyester percentage grafted onto chitosan backbone was varying from 7 to 52 wt % as a function of molecular weight of PHAs, namely as a function of steric effect. Solubility tests were also performed. Graft copolymers were soluble, partially soluble or insoluble in 2 wt % of HOAc depending on the amount of free primary amine groups on chitosan backbone or degree of grafting percent. Thermal analysis of PHO‐g‐Chitosan graft copolymers indicated that the plastizer effect of PHO by means that they showed melting transitions T_ms at 80, 100, and 113°C or a broad T_ms between 60.5–124.5°C and 75–125°C while pure chitosan showed a sharp T_m at 123°C. In comparison of the solubility and thermal properties of graft copolymers, linoleic acid derivatives of chitosan were used. Thus, the grafting of poly(3‐hydroxyalkanoate) and linoleic acid onto chitosan decrease the thermal stability of chitosan backbone. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103:81–89, 2007     

Synthesis and antimicrobial activity of Schiff base of chitosan and acylated chitosan

Chitosan, a biocompatible, biodegradable, nontoxic polymer, is prepared from chitin, which is the second most naturally occurring biopolymer after cellulose. Schiff base of chitosan, sorbyl chitosan, and p‐aminobenzoyl chitosan were synthesized working under high‐intensity ultrasound and their antimicrobial properties were analyzed against Escherichia coli, Staphylococcus aureus, and Aspergillus niger. The structures of the derivatives were characterized by FTIR spectroscopy and elemental analysis. The results of antimicrobial activities indicated that the antimicrobial activities of the derivatives increased with increasing the concentration. The antibacterial activity of schiff base of chitosan against E. coli was stronger, while acylated chitosan had better inhiting effect on S. aureus than others. It was also found that the antifungal activities of the derivatives were stronger than that of chitosan, and schiff base of chitosan was obviously superior to acylated chitosan. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of chitosan alkyl carbamates

The synthesis of chitosan methylcarbamate (ChMC) and ethylcarbamate (ChEC) is described by using a new methodology. Polymers with substitution degrees up to 63% for ChEC and 68.5% for ChMC were obtained. Derivatives with lower substitutions were acid soluble but those with higher ones were completely insoluble. This could be due to the loss in hydrophilic sites when the substitution degree increases. The reaction conditions and degree of substitution obtained for both derivatives were also described. A complete chemical characterization was carried out by spectroscopic techniques. The thermal degradation of chitosan and derivatives were studied in the range 25–500°C and both derivatives were shown to be thermally less stable than chitosan. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2742–2747, 2002     

壳聚糖及其衍生物对土壤重金属的稳定化效应

随着工业的发展,特别是采矿冶炼等行业的发展,使含重金属的废弃物进入土壤,造成土壤重金属污染,对环境和人体健康产生极大威胁。本文以湖南怀化某铅锌矿渣堆放地周围污染土壤为研究目标,通过壳聚糖及其衍生物对污染土壤中重金属离子的稳定化实验,筛选出对目标重金属（Cd²⁺、Pb²⁺、Zn²⁺）具有最佳稳定效果的稳定剂,探究了稳定剂对土壤中重金属离子的稳定机理,并在模拟酸雨淋溶条件下研究了最佳稳定剂对重金属离子的长期稳定化效果。稳定化实验结果表明,壳聚糖及其衍生物对土壤重金属离子均有稳定化作用,其中羧甲基壳聚糖的稳定效果最好,其使污染土壤中重金属离子的可迁移性及生物有效性明显降低。通过重金属形态分析、扫描电镜（SEM）及X射线衍射（XRD）分析得出稳定剂与土壤中重金属离子发生反应生成络合物,并通过机理分析进一步验证了羧甲基壳聚糖的稳定效果最好;淋溶实验表明,羧甲基壳聚糖对土壤中重金属离子具有长期稳定性,经其稳定后土壤中重金属离子以更稳定不易迁移的形态存在,且使土壤环境得到改善,增强了土壤本身对重金属离子的稳定。羧甲基壳聚糖有望成为修复重金属（Cd²⁺、Pb²⁺、Zn²⁺）污染土壤的优良稳定剂。     

Liquid‐crystalline behavior of chitosan in malic acid

This report describes how the degree of deacetylation and molecular weight of chitosan and the concentrations of sodium chloride and malic acid affect the formation of lyotropic chitosan liquid crystals. Chitosan samples of various degrees of deacetylation were prepared from β‐chitin that was isolated from squid pens. They were degraded by ultrasonic irradiation to various molecular weights. The critical concentrations forming chitosan liquid crystals were determined with a polarized microscope. A chitosan sample with a degree of deacetylation of 67.2–83.6% formed cholesteric lyotropic liquid crystals when it was dissolved in 0.37–2.59M malic acid. The critical concentrations increased with increasing degrees of deacetylation of chitosan. They decreased with increasing molecular weights or increasing concentrations of sodium chloride and malic acid. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Spectroscopic and conformational study of chitosan acid salts

The efficient procedure for preparation of chitosan acid salts in isopropyl alcohol under mild condition has been demonstrated. The salts were prepared by dissolving chitosan into ascorbic acid, p-amino benzoic acid and p-nitro benzoic acid, respectively, and then washed with an isopropyl/water mix-solvent. The prepared crystal salt and molecular conformation of modified chitosan derivatives are characterized by using ultraviolet, Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), X-ray diffraction and Circular dichroism (CD) techniques. The formation of salts was confirmed by FTIR (∼1,523–1,557 cm⁻¹) and NMR (∼7–8 ppm) with respect to the bonding between NH₂ group on chitosan and COOH group on acid. The CD spectra of chitosan salts showed negative at (253, 285 and 295 nm band) in chitosan ascorbic acid, p-amino benzoic acid and p-nitro benzoic acid salt respectively in DMSO, indicating that the polymer adopted a helical secondary structure. The polymers are highly soluble in a wide pH range, which opens new perspectives for the biomedical application of chitosan based-materials.     

Preparation of sodium salts of N‐sulfonic acids by sulfomethylation of nitro oligomers obtained from waste rubbers

The sulfomethylation of nitro oligomers obtained from waste rubbers (NO‐GWR) with sodium hydroxymethane sulfonate was studied in aqueous–alkali solutions from 50 to 80°C for reaction times of 3.5–5.5 h with weight ratios of 1.0:0.3–0.6. The initial NO‐GWR was produced by the oxidation/destructive nitration of waste rubbers with nitric acid in a heterogeneous medium. The influence of the reaction conditions on the yields and functional compositions of the sodium salts of two types of N‐sulfonic acids was investigated. Some of the nitro groups transformed into sulfaminate groups at 80°C or lower. One type of N‐sulfonic acid was isolated from its sodium salt by ion exchange. The oligosulfo derivatives were characterized by elemental and thermal analyses, IR and ¹H‐NMR spectroscopy, and the number‐average molecular weight. The sodium salts of the N‐sulfonic acids obtained from NO‐GWR possessed functional compositions similar to those of sodium salts from butadiene–styrene nitro oligomers prepared from butadiene–styrene latexes. Therefore, NO‐GWR obtained from available raw materials can be used as the initial derivative for the preparation of salts of N‐sulfonic acids instead of the nitro oligomers used now from elastomers. The salts can be used in galvanic coating techniques as brighteners. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1002–1013, 2005     

Permeation of solutes through chemically modified chitosan membranes

Chemically and mechanically stable chitosan and N-acylchitosan were prepared. N-Octanoylchitosan gives the pronounced decrease of water content, whereas N-benzoylchitosan keeps a higher content of water. The equilibrium sorption of various sodium salts was determined and is explained by a dual mechanism, consisting of partition and Langmuir sorption. The characteristics of the membrances and the size of the salt anions clearly influence permeability as well as sorption. Permeation behavior was interpreted by the Teorell-Meyer-Sievers (TMS) theorem. The mobility of anions decreases with Stokes radius, decreasing in the order chitosan > N-benzoylchitosan > N-octanoylchitosan, indicating the effect of the polymer chain molecules, especially a steric obstruction effect on the ion transportation through the membranes. The introduction of the N-acylated hydrophobic group to the charged chitosan membranes appears to enhance permselectivity. © 1995 John Wiley & Sons, Inc.     

Fungicidal and Insecticidal Activity of O-Acyl Chitosan Derivatives

Summary A series of O-(acyl) chitosan (OAC) derivatives with a degree of substitution (DS) between 0.02 and 0.28 were synthesized by reaction of alkanoic acid derivatives with chitosan in the presence of H₂SO₄ as a catalyst. The reaction was performed at 80 °C for 4 h with different mol ratios of alkanoic acids to chitosan. The synthesized compounds were analyzed by ¹H- and ¹³C-NMR spectroscopy. A high DS was obtained with O-(butyroyl) chitosan (DS 0.28) at a mol ratio of (1:5) chitosan to butyric acid. Their fungicidal activity against the grey mould Botrytis cinerea (Leotiales: Sclerotiniaceae) and the rice leaf blast pathogen Pyricularia grisea (Teleomorph: Magnaportha grisea) has been evaluated. O-(decanoyl) chitosan at mol ratio of 1:2 (chitosan to decanoic acid) was the most active compound against B. cinerea (EC₅₀=1.02 g.l^-1) and O-(hexanoyl) chitosan displayed the highest activity against P. grisea (EC₅₀=1.11 g.l^-1). It has been mentioned that some derivatives also repressed spore formation at rather high concentrations (1.0, 2.0 and 5.0 g.l^-1). The insecticidal activity has been screened at 5 g.kg^-1 artificial diet against the larvae of the cotton leafworm Spodoptera littoralis (Lepidoptera: Noctuidae). The results revealed that all of the synthesized derivatives showed high inhibition of growth of the larvae of S. littoralis compared to chitosan (7% growth inhibition) and the most active one was O-(decanoyl) chitosan (64% growth inhibition) after 5 days of feeding on treated artificial diet.     

Variation in Properties of Chitosan Prepared at Different Alkali Concentrations from Squid Pen and Shrimp Shell

Chitin from squid pen (Loligo sp.) and kiddi shrimp shell (Parapenaeopsis stylifera) were treated at room temperature (30 ± 2°C) with four different concentrations of sodium hydroxide: 20, 30, 40, and 50% w/w. With 50% sodium hydroxide solution, within 108 h, the chitin from squid pen was deacetylated to give chitosan. But it required 126 h at 40% and 144 h at 30% concentration of sodium hydroxide. In the case of chitin from Parapenaeopsis stylifera, complete deacetylation took place after 120 h and 168 h at 50 and 40% concentrations of sodium hydroxide, respectively. But shrimp shell on treatment with 20 and 30% sodium hydroxide solutions and squid pen kept at 20% sodium hydroxide were not sufficiently deacetylated even after 480 h. Properties like degree of deacetylation, viscosity and molecular weight of the prepared chitosan samples were studied. Minimum alkali concentration required for the formation of chitosan at room temperature was found to be 30% for squid chitin and 40% for shrimp chitin. With the increase in the time of deacetylation, decreases in molecular weight and viscosity were observed in chitosan from both sources. Maximum viscosity was recorded by chitosan prepared from squid pen using 30% sodium hydroxide solution at room temperature.     

Preparation of amphoteric N,O‐carboxymethyl hydroxypropyl chitosan by a two‐step reaction

A novel N,O‐carboxymethyl hydroxypropyl chitosan (HPCMS) derivative was prepared by a two‐step reaction. Water‐soluble hydroxypropyl chitosan (HPCS) with a degree of substitution of hydroxypropyl higher than 0.8 was first synthesized by the reaction of chitosan (CS) with propylene oxide (PO) with alkali as a catalyst. Then, amphoteric chitosan derivatives (HPCMS) with a degree of substitution of carboxymethyl ranging from 0.42 to 1.38 were prepared by the reaction of HPCS with chloroacetic acid in an aqueous solution with alkali as a catalyst. The structures of the polymers were characterized by Fourier transform infrared spectroscopy and NMR; this showed that the hydroxypropylation mainly occurred on the ? OH groups at the C‐6 of CS in the reaction of CS with PO. In the reaction of HPCS with chloroacetic acid, both the ? OH and ? NH₂ groups of HPCS were susceptible to the carboxymethylation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40460.