双会切串级镜MM—4U的初步实验结果

本文描述MM-4U装置及其初步实验结果。这些结果主要是,用电子注入可以在装置系统中建立等离子体;测得轴向等离子体电位分布,东、西会切中心和中心室的等离子体电位分别为-184V,-164V和-1.8V;得到轴向电子密度分布与电位分布有相同形式,三个中心的密度分别为1.7×10~(11)cm_(-3),4.7×10~(10)cm~(-3),7.5×10~7cm~(-3);观测到中心室存在不稳定性,其振荡频率为7—9.2kHz。对上述结果进行了分析,提出了进一步研究的课题。     

反磁剪切等离子体中的电阻交换模不稳定性

具有内部输运垒（ITB）的反磁剪切（RS）等离子体位形是在托卡马克中获得高参数的最具前景的途径之一。这种位形不仅改善等离子体约束,而且可以改进象气球模和新经典撕裂模等这类宏观模的稳定性。然而,反磁剪切区域的高压强可以驱动电阻交换模不稳定性,从而破坏中心区的等离子体高参数。为了研究电阻交换模不稳定性的性质,并确定其在RS等离子体中发展的区域,我们利用在HL－2A中使用中性束注入建立的RS位形来分析电阻交换模不稳定性。     

MM-4中电位和分布实验

本文描述了用静电探针测量探针悬浮电位的方法,给出了MM-4电位分布的实验结果。结果表明,轴向电位分布不对称;在等离子体中沿轴向和径向存在双离子位阱。在离子能谱测量中观察到双离子温度。产生这样电位分布的机制,归于会切系统中的斯托沫区和电子枪的不同工作方式。测量的等离子体电位为-200——300V。     

HL-2M等离子体垂直不稳定性研究

用DⅢ-D的TokSys研究了HL-2M等离子体垂直不稳定性控制问题。使用真空室和主动线圈控制等离子体垂直不稳定性,分析了真空室的本征模和电流分布,极大简化真空室建模难度,建立了垂直不稳定性数学模型,验证了主动线圈和电源模型参数,计算了不同拉长比位形的等离子体增长率和最大可控垂直位移。利用TokSys建立了雪花、单零、双零偏滤器位形垂直不稳定仿真模型,然后通过simulink对采用PD算法的垂直不稳定系统进行仿真。结果表明,构建的模型能够较好控制不同位形的垂直不稳定性。     

KT—TC托卡马克上不同限制器偏压下等离子体p约束改善的实验研究

在ＫＴ－５Ｃ托卡马克上，采用多块组合的可偏压限制器控制等离子体边缘电场，进行了改善等离子体的边缘参数及其机制的研究。实验显示，限制器的正、负偏压都能改变等离子体电位，但正偏压更胶儿，能有效地建立边缘电场，进而抑制边缘扰动改善等离子体约束。利用可移动静电探针，测得正偏压期间边缘电子温度Ｔｅ（ｒ）、电子密度ｎｅ（ｒ）、空间电位Ｖｐ（ｒ）分布变陡，与计算得到的边缘粒子通量Г（ａ０）减少，整体粒子约束时间     

用于半导体加工的腔耦合—磁多极型ECR源的研究

本实验室研制出一台谐振腔耦合－多极场位形的电子回旋共振（ＥＣＲ）微波等离子体源（ＭＥＰ）。采用朗谬探针和离子能量分析器，测量了ＭＥＰ中Ａｒ等离子体的放电特性。实验结果表明，ＭＥＰ能在很宽的运行参数范围，高效率地产生具有较高密度、较低离子温度和空间电位的大面积均匀等离子体，特别适合于半导体加工应用研究。     

用于半导体加工的腔耦合－磁多极型ECR源的研究

本实验室研制出一台谐振腔耦合一多极场位形的电子回旋共振（ＥＣＲ）微波等离子体源（ＭＥＰ）。采用朗谬探针和离子能量分析器，测量了ＭＥＰ中Ａｒ等离子体的放电特性。实验结果表明．ＭＥＰ能在很宽的运行参数范围，高效率地产生具有较高密度、较低离子温度和空间电位的大面积均匀等离子体，特别适合于半导体加工应用研究。     

HL-2M�������崹ֱ���ȶ����о�

用DⅢ-D的TokSys研究了HL-2M等离子体垂直不稳定性控制问题.使用真空室和主动线圈控制等离子体垂直不稳定性,分析了真空室的本征模和电流分布,极大简化真空室建模难度,建立了垂直不稳定性数学模型,验证了主动线圈和电源模型参数,计算了不同拉长比位形的等离子体增长率和最大可控垂直位移.利用TokSys建立了雪花、单零、双零偏滤器位形垂直不稳定仿真模型,然后通过simulink对采用PD算法的垂直不稳定系统进行仿真.结果表明,构建的模型能够较好控制不同位形的垂直不稳定性.     

KT-5C托卡马克上不同限制器偏压下等离子体p约束改善的实验研究

在KT-5C托卡马克上,采用多块组合的可偏压限制器控制等离子体边缘电场.进行了改善等离子体的边缘参数及其机制的研究.实验显示,限制器的正、负偏压都能改变等离子体电位,但正偏压更有效,能有效地建立边缘电场,进而抑制边缘扰动改善等离子体约束.利用可移动静电探针,测得正偏压期间边缘电子温度T_e(r)、电子密度n_e(r)、空间电位V_p(r)分布变陡,与计算得到的边缘粒子通量Г(a_(?))减少,整体粒子约束时间τ_p增加结果是一致的.     

环径比接近2的托卡马克堆芯等离子体特征

初步研究了环径比接近2的托卡马克堆芯等离子体的基本特征。这类位形具有非常好的使磁流体稳定的特性，可以基本排除等离子体破裂不稳定性。从H模约束要求和氘氚燃烧实验出发，讨论r相关的基本问题：比压极限和密度极限、基本等离子体参数间的凋整、氘氚自持燃烧条件等。参数选取的基本依据是ITER和ITER-FEAT的设计经验。     

静电堵漏串级镜MM－4U的约束位形的理论研究

本文分析了双会切静电堵漏串级磁镜ＭＭ－４Ｕ中粒子损失的可能机制，考虑了等离子体粒子能量的切断，从平衡的Ｖｌａｓｏｖ方程的解出发，数值求解了一组静态的达朗倍尔方程，即Ｐｏｉｓｓｏｎ方程和Ｍａｘｗｅｌｌ方程，得到了等离子体电位、密度及非中性度（净余电子数密度）分布。结果表明，堵漏电压及堵漏电极极板的几何位形、磁场位形及磁场大小、电子温度及电子－离子温度比在串级磁镜的约束位形的形成中起着重要的作用。     

Transport of the ion bounced by the plug potential caused by radial electric field in the tandem mirror

In the tandem mirror, plug potentials are created in the plug/barrier cells by microwave injection, and also anchor cells with a minimum B magnetic field configuration are installed in order to reduce the MHD instability. Existence of the ion bounced by the plug potential (PP-bounced ion) is essential for the ion confinement in the tandem mirror. We study the transport of the PP-bounced ion on the assumption that the cross-sectional shape of the magnetic flux tube is slightly different from the cross-sectional shape of the equi-potential surface at the mirror throats of the anchor cell as small deviation from the equilibrium state. The radial-potential profile of the core plasma is adjusted by controlling the electrostatic potentials of the coaxially separated end plates. We find that the spread type of radial-potential profile is effective for the confinement of the plug-potential-bounced ion.Presented at the Workshop Electric Fields Structures and Relaxation in Edge Plasmas, Nice, France, October 26–27, 2004.     

Influence of radial electric field on trajectories of plug potential bounce ion in the tandem mirror

Bouncing ions between the plug potentials play an important role in improvement of the axial confinement in the tandem mirror. We examined the influence of the radial electric field on the trajectories of the ions passed through the anchor cell with nonaxisymmetric magnetic configuration on the assumption that the shape of the magnetic flux tube was shifted from the shape of the equipotential surface of the plasma at the mirror throats of the anchor cells. The discrepancy between the shapes enhanced the radial drift of the bounce ion. Radial potential profile of the core plasma was controlled by adjustment of the radially separated endplate potentials, and it was found that the flattened radial potential profile was effective for the decrease of the radial drift. Presented at 5th Workshop “Role of Electric Fields in Plasma Confinement and Exhaust”, Montreux, Switzerland, June 23–24, 2002.     

非均匀磁场磁镜粒子约束的Monte-Carlo模拟

本文在碰撞区和无碰撞区之间的过渡区,就LAMEX和抛物线轮廓两种空间变化磁场磁镜,用Monte-Carlo模拟研究了粒子约束问题。在过渡区,粒子约束时间高于其它两区公式的外推值,并与磁镜比成正比关系。这一模拟还用自洽解的方法得到了密度轮廓,并研究了这一轮廓和等离子体参数的关系。 关键词：     

Stabilization of interchange modes by rotating magnetic fields

Interchange modes have been a key limiting instability for many magnetic confinement fusion configurations. In previous studies intended to deal with these ubiquitous instabilities, complex, transport enhancing, minimum-B producing coils were added to the otherwise simple linear mirror plasma. Possible solutions for returning to a simple symmetric mirror configuration, such as ponderomotive fields, are weak and difficult to apply. A new method is demonstrated here for the first time, utilizing rotating magnetic fields that are simple to apply and highly effective. A simple and easily comprehensible theory has also been developed to explain the remarkable stabilizing properties. Although this work has been performed on field reversed configurations, it should have a wide application to other confinement schemes, and could become a cornerstone for high-beta plasma stability.     

Electron-Cyclotron Resonance Heating in Tandem Mirrors

Using numerical ray-tracing techniques, we study the propagation and absorption profiles of electromagnetic waves launched in the end cells of three different tandem mirrots: Phaedrus, an overdense low-temperature tandem mirror with plugs; TASKA, a conceptual tandem mirror with plugs and thermal barrier; and TMX-U, a tandem mirror with a significant hot-electron population. In particular, the effects of weakly relativistic thermal anisotropy on the absorption profile are examined. In general, at sufficiently low densities and temperatures, the X mode can access the plasma and achieve significant heating of the electrons. As the electron temperature increases, the X mode gets quickly absorbed at the edge and only the O mode achieves significant penetration and heating. For sufflciently large launching angles, the presence of thermal anisotropy can actually shift the region of maximum absorption towards the electron-cyclotron resonance layer. Regions of whistler instability appear along rays launched nearly along the machine axis, when the thermal-anisotropy ratio, temperature, and density reach sufficiently high values.     

利用低杂波改善约束的实验研究

介绍了在HT-6M托卡马克上,利用双低杂波的组合,成功地实现了准稳态的高约束模式运行. 能量约束时间提高两倍以上,粒子的约束在较高密度下依然改善3倍以上.通过应用波扩散及 电流径向扩散方程计算低杂波电流传播的方法,对一组典型的数据进行数值模拟.计算表明 ,在HT-6M低杂波实验中,由于纵场较低,密度较高,低杂波的能量沉积在离磁轴较远的位 置,使等离子体电流密度分布成为反剪切位形,内部输运垒地形成,大大提高了等离子体的 约束状况.实验数据也给出了反剪切的证据. 关键词： 托卡马克 低杂波 约束改善     

电磁捕集器的设计

本文叙述了一个静电堵漏会切型等离子体约束系统。基本设计参数为:电极所在之处磁场达10kG;堵漏电压为10kV;等离子体密度～10~(12)cm。;离子温度>O.5keV;约束时问>5ms。 该装置可用作为等离子体积累与加热、电势屏蔽、静电堵漏轴对称串级镜端塞的研究。     

˺��ģʵʱ��������ϵͳ

Tearing mode real-time active control system has been developed on HL-2A tokamak. During the plasma discharge, electron cyclotron emission and soft X-ray diagnostic signals are used to get the geometric location where tearing modes emerge, combined with the real time profile reconstruction and electron cyclotron wave (ECW) deposition algorithm, the target angle of ECW steering mirror can be obtained. Then the mirror angle is set by the motor so that the ECW power deposit at the position of tearing modes finally. Consequently the tearing modes can be controlled, owing to the change of local current profile, and the plasma confinement is improved. This system has been deployed in HL-2A campaigns after 2015, and the good control effect is obtained. It has been proved that the system can discover and control not only the classical tearing modes in real time, but also has the potential to control the neoclassical tearing mode in the future.     

撕裂模实时主动控制系统

在HL-2A装置上发展了一套撕裂模实时主动控制系统。该系统在放电期间用电子回旋发射/软X射线诊断实时确定撕裂模的几何位置,结合实时剖面重建和电子回旋波沉积计算,得到电子回旋波反射镜的控制角度值。通过电机实时驱动电子回旋波反射镜到达指定角度,使得电子回旋波功率沉积在撕裂模的有理磁面附近,改变当地局部的电流剖面,从而控制撕裂模,改善等离子体约束。该系统已经在2015年以后的实验中投入使用,并取得了良好的控制效果。它不仅能够实时发现并控制经典撕裂模,并且具有控制新经典撕裂模的潜力。