气相色谱-质谱法定性分析蒽醌系列工作液的组成

采用气相色谱-质谱法（GC-MS）对双氧水生产用乙基蒽醌工作液/氢化液组成进行分析，结合蒽醌工作液制备双氧水的反应原理，形成了乙基蒽醌工作液/氢化液的组成信息表。同样采用GC-MS对戊基蒽醌工作液/氢化液的组成进行分析，结合乙基蒽醌工作液/氢化液的组成信息，推测戊基蒽醌工作液/氢化液中组成的可能结构信息，形成了戊基蒽醌工作液/氢化液组成信息表。该法可以为蒽醌法生产双氧水的企业提供降解物的相关信息，为脱除无效降解物提供参考。     

2-乙基蒽醌的合成工艺研究

本文以邻苯二甲酸酐和乙苯为原料，采用傅氏酰基化，水解，闭环，蒸馏回收溶剂，氧化还原提纯及乙醇萃取蒸馏技术，合成了高纯度2-乙基蒽醌．     

柠檬酸改性的H-Beta上2-(4′-乙基苯甲酰基)苯甲酸的脱水反应

 以改性的 H-beta 沸石分子筛为催化剂,代替传统的浓硫酸或发烟硫酸催化剂,使2-(4′-乙基苯甲酰基)苯甲酸脱水闭环生成 2-乙基蒽醌是一条清洁生产路线. 其中柠檬酸改性的 H-beta 催化剂表现出很好的催化性能,可以明显降低反应温度,缩短反应时间. 在柠檬酸改性的 H-beta 催化剂上,当反应温度为529 K, 反应时间为60 min时, 2-(4′-乙基苯甲酰基)苯甲酸的转化率为99.5%, 2-乙基蒽醌的选择性可达97.2%; 而在未经柠檬酸改性的 H-beta 催化剂上,当反应温度为550 K, 反应时间为60 min时, 2-(4′-乙基苯甲酰基)苯甲酸的转化率只有81.6%, 2-乙基蒽醌的选择性为96.4%.     

3,6-二(蒽醌-2-乙烯基)-N-乙基咔唑的合成及光谱性质研究

利用N-乙基咔唑和2-甲基蒽醌合成了一种A-π-D-π-A分子内电荷转移型化合物3,6-二(蒽醌-2-乙烯基)-N-乙基咔唑,并对该化合物的光化学和光物理行为进行了研究。荧光光谱表明,该化合物的发光行为对溶剂的极性非常敏感,随着溶剂极性的增大,其荧光最大发射峰有明显红移,并在强极性溶剂乙腈中出现了双荧光现象。该化合物的激发态和基态的偶极矩差值△μ为3.014D,发生了从给体(咔唑基)的N原子到分子两端受体(蒽醌)的羰基的分子内电荷转移。     

2-乙基蒽醌在双金属整体式催化剂上的氢化反应: 实验和DFT研究

过氧化氢(H2O2)是一种绿色化工原料和环境友好氧化剂. 目前, 超过 98% 的H2O2是通过蒽醌法生产. 蒽醌法主要包括 2-乙基蒽醌氢化生成 2-乙基氢蒽醌和 2-乙基氢蒽醌氧化生成 2-乙基蒽醌和H2O2的过程. 其中, 2-乙基蒽醌氢化是关键步骤. 在氢化过程中, 生成的 2-乙基氢蒽醌和四氢-2-乙基氢蒽醌是目标产物, 同时生成许多副产物. 目前, Pd 颗粒催化剂是广泛使用的催化剂, 但是蒽醌氢化过程中, 质量传递是主要的控制因素. 与颗粒催化剂对比, 整体式催化剂可以减弱整个反应的内外扩散, 提高反应速率. 很多研究结果显示, 整体式催化剂的传质优于颗粒催化剂, 可以提高催化效率. 近期许多研究显示, 双金属颗粒催化剂在很多氢化反应中体现出优异的催化性能. 本工作制备了双金属整体式催化剂, 考察了其在蒽醌氢化过程中的催化性能.首先, 通过浸渍法制备了4 种双金属整体式催化剂 Pd-M/SiO2/COR (M = Ni, Fe, Mn和 Cu)以及Pd/SiO2/COR和Ni/SiO2/COR两种单金属整体式催化剂. 催化活性结果显示, Ni/SiO2/COR的H2O2产量低于 Pd/SiO2/COR, 而且在 700 oC还原的 Pd-Ni/SiO2/COR 整体式催化剂在 Pd/M = 2 时取得了最高选择性 (95.3%) 和H2O2产量 (7.5 g/L). 然后, 考察了金属负载量的影响. 结果显示, 在金属负载量低于 0.4% 时, 随着金属负载量增加, 选择性和H2O2产量增加, 在金属负载量高于0.4% 时, 随着金属负载量增加, 选择性和H2O2产量降低. TEM结果表明, 添加第二种金属后, 双金属整体式催化剂颗粒尺寸变小, 分布更均匀. EDS结果显示, 双金属形成了合金. H2-TPR结果显示, 随着Pd/M比率增加, 还原温度降低, 说明Pd有助于第二种金属氧化物的还原. 这可能是由于 Pd 表面的氢溢流到第二种金属 (Ni, Fe, Mn和 Cu) 表面. 此外, 文献结果表明, 合金的形成能够抑制 PdH 的形成. 本工作表明添加第二种金属 (Ni, Fe, Mn和Cu) 后, PdH 的峰强度减弱或者峰消失, 也说明形成了合金. XPS 结果显示, 添加第二种金属后,在 336.3 ± 0.1 和 341.4 ± 0.1 eV 出现了新的 Pd 3d5/2和 Pd 3d3/2峰, 说明形成了合金. H2-O2滴定结果表明, Pd-Ni/SiO2/COR的Pd分散度和Pd比表面积都高于其他双金属催化剂, 说明第二种金属 Ni 更有利于促进 Pd 的分散, 减弱颗粒集聚, 揭示了Pd 和 Ni 之间强烈的相互作用. DFT 计算结果显示, Pd3M1(M = Ni, Fe, Mn和Cu) 双金属整体式催化剂和 2-乙基蒽醌之间的结合能低于 Pd/SiO2/COR和 2-乙基蒽醌之间的结合能, 但是 Pd3M1(M = Ni, Fe和Mn) 双金属催化剂和 2-乙基氢蒽醌之间的结合能减小得很少, 这可能是由于 2-乙基蒽醌的 C=O 和第二种金属之间具有强烈相互作用的缘故. Pd3Cu1双金属催化剂和 2-乙基氢蒽醌之间的结合能减小很多, 主要是由于 Pd3Cu1表面不利于 2-乙基氢蒽醌的吸附.因此, Pd-Ni/SiO2/COR 比 Pd/SiO2/COR, Ni/SiO2/COR 和其他的双金属整体式催化剂具有更高的选择性和H2O2产量, 主要是由于合金的形成以及 2-乙基氢蒽醌的 C=O 双键和 2-乙基氢蒽醌强烈的相互作用.     

非负载镍催化剂的2-乙基蒽醌加氢活性及其氢吸脱附性质

 分别制备了金属镍粉、兰尼镍、Ni-B非晶态合金及镧掺杂的Ni-B非晶态合金(Ni-B-La)催化剂,研究了催化剂的氢吸附和脱附性质以及对2-乙基蒽醌加氢反应的催化性能. 结果表明,金属镍粉、兰尼镍和Ni-B催化剂表面均具有两种氢吸附位: 弱吸附位和强吸附位. Ni-B-La催化剂表面只有氢的强吸附位,其强吸附氢量与兰尼镍相当. 推测只有氢的强吸附位是2-乙基蒽醌加氢反应的活性中心,并且Ni-B-La催化剂上的强吸附氢较兰尼镍上的更活泼,因而Ni-B-La非晶态合金催化剂对加氢反应的催化活性高于兰尼镍.     

相溶解度法研究环糊精对蒽醌药物的增溶作用

通过相溶解度法,测定1,2-二氨基蒽醌、1,4-二氨基蒽醌和1,8-二羟基蒽醌在不同温度、不同浓度的β-环糊精(β-CD)、羟丙基-β-环糊精(HP-β-CD)以及羟乙基-β-环糊精(HE-β-CD)中的溶解度,绘制相溶解度曲线,并进行回收率及稳定性实验.实验结果表明:1,2-二氨基蒽醌、1,4-二氨基蒽醌和1,8-二羟基蒽醌的溶解度均随3种环糊精浓度的增加而呈线性增加,相溶解度曲线为AL型,蒽醌与环糊精形成的包合物类型为1∶1型,3种环糊精对蒽醌均有增溶作用,增溶效应顺序为HP-β-CDHE-β-CDβ-CD,与HP-β-CD作用顺序为1,2-二氨基蒽醌1,4-二氨基蒽醌1,8-二羟基蒽醌.     

蒽醌-2-甲酸烯烃类衍生物的合成

以2-甲基(或乙基)蒽醌为起始原料,经氧化、酰氯化、酯化等反应合成了3个蒽醌-2-甲酸烯烃类衍生物——乙二醇-9,10-蒽醌-2-甲酸丙烯酸脂,蒽醌-2-甲酸-10-十一碳烯脂和乙二醇蒽醌-2-甲酸甲基丙烯酸脂(6～8),其结构经1H NMR表征。UV测试结果表明,6～8在三氯甲烷中的λmax均为327 nm。     

由蒽醌衍生的二价和三价过渡金属偶氮配合物及其致突变－畸变作用

制备了4-(5′-氨基萘-3′-磺酸)偶氮-(2″-N-(4苁,6苁-二氯-S-三嗪)苯-5″-(β-羟乙基砜硫酸酯)-2-甲基蒽醌(2a),4-(2′-氨基苯磺酸)偶氮-(2″-N-(4苁,6苁-二氯-S-三嗪)-3″-苯磺酸)-2-甲基蒽醌,4-(5′-氨基萘-3′-磺酸)偶氮-(2″-N-(4苁,6苁-二氯-S-三嗪)苯-5″-(β-羟乙基砜硫酸酯)-2-甲基蒽醌和4-(p-(β-羟乙基砜硫酸酯)偶氮-(2″-N-(4苁,6苁-二氯-S-三嗪)萘-5″-磺酸)-2-甲基蒽醌的FeIII,CoII金属配合物,并在安姆/沙门氏菌/微粒体致突变试验(Ames/Salmonella/Microsome Test)和大鼠胚胎中测定其致突变-畸变作用。不管是否使用代谢赋活剂S9mix,2a-Fe和2a-Co对TA98 and TA100菌株均无致突变-畸变作用。     

载体对负载型Ni-B催化剂催化2-乙基蒽醌加氢制H2O2反应性能的影响

采用还原剂浸渍法将Ni-B非晶态合金负载到SiO2,γ-Al2O3和活性炭(AC)上,以2-乙基蒽醌选择加氧制H2O2为探针反应,系统研究了载体对Ni-B非晶态合金催化剂结构、热稳定性和催化性能的影响.结果表明,将Ni-B负载到载体上后,其晶化温度显著提高,各催化剂热稳定性依次为Ni-B/AC＞Ni-B/SiO2＞Ni...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.