冷轧薄宽带钢局部型中浪瓢曲变形行为研究

针对薄宽带钢冷轧过程中易发多发的局部型中浪瓢曲缺陷,引入非均匀载荷宽度、弹性约束系数及平均张应力建立了屈曲变形的解析计算模型。应用能量最低原理对屈曲变形区域进行搜索求解,得到了局部型中浪屈曲临界条件(包括临界应力、屈曲波长和屈曲波宽),获得了其与非均匀载荷宽度、弹性约束系数、平均张应力的关系,并发现平均张应力是产生局部型中浪的重要影响因素。应用样条有限元方法对局部型中浪进行数值仿真分析,验证了屈曲解析计算方法的正确性。在实验轧机上进行了轧制研究,通过轧制获得了局部型中浪屈曲模态,对实验结果分析得到了相对应的屈曲临界条件,与解析法和样条有限元法结果基本吻合,证明了样条有限元计算方法与解析计算方法的正确性及其工程应用价值。     

FRM用先进陶瓷纤维及其拉伸强度

陶瓷,其耐热性、耐腐蚀性、功能性等引起人们重视,作为一种新材料而得到开发,其有用性得到了公认。所谓新材料,或明显提高原料纯度,或使其形状极端微细化、微粉化或者薄膜化,或使原料组合、制成合金,从而使材料性能得到空前的发挥。碳化硅(SiC)、硼(B)、氧化铝(Al₂O₃)等陶瓷也可使其形状变成又细又长的纤维状,从而使拉伸强度提高,使陶瓷的使用变得容易起来。本稿将就最近开发的轻质高强陶瓷纤维的性能加以介绍。      

INFLUENCE OF DAMPING MODELS ON DYNAMIC ANALYSES OF A BASE-ISOLATED COMPOSITE STRUCTURE UNDER EARTHQUAKES AND ENVIRONMENTAL VIBRATIONS

Structural design simultaneously governed by earthquakes and environmental vibrations has received a lot of attention in recent years.Base-isolated composite structures are typically used in the above-mentioned structural design.The corresponding analysis involves validating structural safety under earthquakes and human comfort under environmental vibrations through a time-history analysis.Thus,a reasonable damping model is essential.In this work,the representatives of viscous damping model and rate-independent damping model,namely the Rayleigh damping model and uniform damping model,were adopted to investigate the influence of damping models on the time-history analysis of such structural designs.The energy dissipation characteristics of the above-mentioned damping models were illustrated via a dynamic test of recycled aggregate concrete specimens.A case study was performed on a base-isolated steelconcrete composite structure.The dynamic responses under the excitation of earthquakes and environmental vibrations were compared using different damping models.The uniform damping model was found to be more flexible than the Rayleigh damping model in dealing with excitations with different frequency components.The uniform damping model is both theoretically advantageous and easy to use,demonstrating its potential in dynamic analysis of structures designed simultaneously governed by earthquakes and environmental vibrations.     

A VIBRATION RECOGNITION METHOD BASED ON DEEP LEARNING AND SIGNAL PROCESSING

Effective vibration recognition can improve the performance of vibration control and structural damage detection and is in high demand for signal processing and advanced classification.Signal-processing methods can extract the potent time-frequency-domain characteristics of signals;however,the performance of conventional characteristics-based classification needs to be improved.Widely used deep learning algorithms(e.g.,convolutional neural networks(CNNs))can conduct classification by extracting high-dimensional data features,with outstanding performance.Hence,combining the advantages of signal processing and deep-learning algorithms can significantly enhance vibration recognition performance.A novel vibration recognition method based on signal processing and deep neural networks is proposed herein.First,environmental vibration signals are collected;then,signal processing is conducted to obtain the coefficient matrices of the time-frequency-domain characteristics using three typical algorithms:the wavelet transform,Hilbert-Huang transform,and Mel frequency cepstral coefficient extraction method.Subsequently,CNNs,long short-term memory(LSTM)networks,and combined deep CNN-LSTM networks are trained for vibration recognition,according to the time-frequencydomain characteristics.Finally,the performance of the trained deep neural networks is evaluated and validated.The results confirm the effectiveness of the proposed vibration recognition method combining signal preprocessing and deep learning.     

有限宽度和椭圆孔形状对缺口层合板强度预测的影响

本文采用有限元方法对正交各向异性材料含有不同椭圆孔形状的有限宽度板作了分析,给出了有限宽度和椭圆孔形状对应力集中因子K₁和孔边应力分布σ_y(x,0)的影响公式。数值结果表明:正交各向异性板的有限宽度和椭圆孔形状对K_r和σ_y(x,0)的影响均与各向同性材料不同,所以有限宽度和椭圆孔形状将对缺口层合板强度的预测产生影响。      

复合材料加筋板的动力分析

本文构造了九自由度三角形拟协调罚函数复合材料板单元与六自由度复合材料梁单元,考虑了剪切变形与转动惯量的影响。用这两种单元对复合材料加筋板的自由振动、阻尼特性和瞬态响应问题进行了研究,给出一些有益结果。      

Microstructure and mechanical properties of CoCrNi-Mo medium entropy alloys:Experiments and first-principle calculations

The effect of Mo additions on the microstructures and mechanical properties of CoCrNi alloys was investigated,meanwhile,ab initio calculations are performed to quantitatively evaluate the lattice distortion and stacking fault energy(SFE).The yield strength,ultimate tensile strength,and elongation of(CoCrNi)₉₇Mo₃alloy are 475 MPa,983 MPa and 69%,respectively.The yield strength is increased by~30%and high ductility is maintained,in comparison with CoCrNi alloy.Besides the nano-twins and dislocations,the higher density of stacking faults is induced during the tensile deformation for(CoCrNi)₉₇Mo₃alloy.Ab initio calculation results indicate the mean square atomic displacement(MSAD)and SFE value of(CoCrNi)₉₇Mo₃alloy is 42.6 pm²and-40.4 mJ/m²at 0 K,respectively.The relationship between mechanical properties and MSAD,SFE for various multiple principal element alloys is discussed.     

数字3D电影最新动向

全球数字3D电影领域的领头羊Real D公司于10月17日与欧洲投资商Terra Firma公司旗下在泛西欧拥有1600块银幕的Odeon院线以及UCI院线签署协议,将于未来2年中在英国、爱尔兰、德国、奥地利以及葡萄牙合作安装500块数字3D银幕.     

第十二届中国建筑企业高峰论坛在绍兴市举行王治安主持会议并致辞

<正>本刊讯2014年12月23日,由中国建设报社、浙江省住房和城乡建设厅、绍兴市人民政府主办的第十二届中国建筑企业高峰论坛在绍兴市举行。来自全国各地的建筑行业主管部门、行业协会负责人,专家学者及企业代表等300余人齐聚一堂,围绕"创新融合,开放共赢"主题,共同分享了一场建筑行业思想盛宴。中国建设报社党委书记杜久才、社长翟建和中国建筑装饰协会会长李秉仁、中国土木工程协会副理事长刘     

9.3大阅兵:高标准让军魂荡气回肠

<正>阅兵是展示辉煌的时刻,而为这一辉煌采取的所有的标准,不啻也是宝贵的财富,应当成为践行标准的榜样……这个月最令人难忘、最引人自豪、最提振国威的事情,当属"9.3"大阅兵,它有着以往没有的多重的亮点:首次以纪念抗日战争暨世界反法西斯战争胜利为阅兵主题,彰显维护和平是全世界人民共同的愿望。首次邀请外国军队代表参加分列式,体现纪念大会的国际性。首次组织抗战老兵包括国民党老兵参加,体现了对历史的尊重,体现全民族抗战的特色。首次编组英模部队方队受阅,展示中国共产党在抗战中定海     

车类影视广告拍摄——光线表现篇

汽车能满足人们生活、娱乐、工作的各种需求,为生活添加乐趣.商务车、房车、越野车或轿车,不管是驰骋还是安静地停放,都具有他们独特的气质,外型、轮廓、结构、颜色、车漆的纹理及其光泽度各有特点.拍摄广告就是要把汽车的这些独到之处提炼、表达出来,在观赏者印象中建立一个全方位的立体形象,激发消费者的购买愿望,这里就必须用到一个非凡的摄影手段--光线.     

涂料的前世与今生

<正>2014年3月24日,应国家主席习近平夫人彭丽媛邀请,美国总统奥巴马夫人米歇尔·奥巴马以及米歇尔的母亲和两个女儿抵达西安参观访问。中午1时,米歇尔一行的车队抵达秦陵博物院,在进入一号俑坑的一刹那,米歇尔露出非常惊讶的表情。既惊讶于兵马俑规模的宏大,也好奇于兵马俑彩绘的绚烂。当她来到一件正在清理的陶俑旁边时,陶俑身上的彩绘吸引了米歇尔的目光。米歇尔好奇地询问这些颜色是不是原始的颜色。考古人员告诉她,这是刚刚发现的。米歇尔随后表示,希望能把文物保护     

CIG前驱膜叠层方式对CIGS膜成分和结构的影响

采用中频交流磁控溅射方法制备了三种不同叠层方式的CuInGa（CIG）前驱膜。采用固态法硒化,获得了CIGS吸收层。采用SEM和XRD观察和分析了薄膜的成分、组织结构和表面形貌。着重分析不同叠层方式的CIG前驱膜对CIGs吸收层薄膜成分、晶体结构的影响。结果表明,三种叠层方式的前驱膜都可以获得成分均匀、结构一致的CIGS吸收层薄膜。Ga可以有效抑制In2Se挥发相生成,保持成分的稳定性。以CuGa（top）／CuIn（bottom）形式的前驱膜有利于形成紧密晶粒排列的CIGS。     

Control of vertical phase separation in high performance non-fullerene organic solar cell by introducing oscillating stratification preprocessing

Non-fullerene organic solar cell(NFOSC)has attracted tremendous attention due to their great potential for commercial applications.To improve its power conversion efficiency(PCE),generally,sequential solution deposition(SSD)methods have been employed to construct the graded vertical phase separation(VPS)of the bulk-heterojunction(BHJ)active layer for efficient exciton separation and charge transition.However,a variety of orthogonal solvents used in the SSD may lead to the unpredicted change in the BHJ morphology and introduce additional defects inside the BHJ bulk thus complicate the fabrication process.Here,a simple oscillating stratification preprocessing(OSP)is developed to facilitate the formation of graded VPS among the BHJ layer.As a result,a significant improvement is obtained in PCE from 10.96%to 12.03%,which is the highest value reported among PBDB-T:ITIC based NFOSC.     

High power and stable P-doped yolk-shell structured Si@C anode simultaneously enhancing conductivity and Li+ diffusion kinetics

Silicon is a low price and high capacity ancxje material for lithium-ion batteries.The yolk-shell structure can effectively accommodate Si expansion to improve stability.However,the limited rate performance of Si anodes can't meet people's growing demand for high power density.Herein,the phosphorus-doped yolk-shell Si@C materials(P-doped Si@C)were prepared through carbon coating on P-doped Si/SiO_xmatrix to obtain high power and stable devices.Therefore,the as-prepared P-doped Si@C electrodes delivered a rapid increase in Coulombic efficiency from 74.4%to 99.6%after only 6 cycles,high capacity retention of-95%over 800 cycles at 4 A·g^-1,and great rate capability(510 mAh·g^-1at 35 A·g^-1).As a result,P-doped Si@C anodes paired with commercial activated carbon and LiFePO₄cathode to assemble lithium-ion capacitor(high power density of?61,080 W·kg^-1at 20 A·g^-1)and lithium-ion full cell(good rate performance with 68.3 mAh·g^-1at 5 C),respectively.This work can provide an effective way tofurther improve power density and stability for energy storage devices.     

F16-4型放映机激励灯的调整和固定

激励灯的灯头上有一大一小两个卡片,在灯座上对应的有两个槽,把激励灯装上去应当稳定不动.但由于槽的缝隙较宽,或固定灯泡的弹簧片疲劳使弹力减弱,致使灯泡受震动后容易前(指的是靠镜头一面)后幌动,这样会导致激励光刃变宽或不均匀,使还音含糊不清、失真.     

Regulating Zn Deposition via an Artificial Solid–Electrolyte Interface with Aligned Dipoles for Long Life Zn Anode

Aqueous zinc ion batteries show prospects for next-generation renewable energy storage devices.However,the practical applications have been limited by the issues derived from Zn anode.As one of serious problems,Zn dendrite growth caused from the uncontrollable Zn deposition is unfavorable.Herein,with the aim to regulate Zn deposition,an artificial solid–electrolyte interface is subtly engineered with a perovskite type material,BaTiO3,which can be polarized,and its polarization could be switched under the external electric field.Resulting from the aligned dipole in BaTiO3 layer,zinc ions could move in order during cycling process.Regulated Zn migration at the anode/electrolyte interface contributes to the even Zn stripping/plating and confined Zn dendrite growth.As a result,the reversible Zn plating/stripping processes for over 2000 h have been achieved at 1 mA cm^?2 with capacity of 1 mAh cm?2.Furthermore,this anode endowing the electric dipoles shows enhanced cycling stability for aqueous Zn-MnO2 batteries.The battery can deliver nearly 100%Coulombic efficiency at 2 Ag^?1 after 300 cycles.     

Low-Temperature Growing Anatase TiO2/SnO2 Multi-dimensional Heterojunctions at MXene Conductive Network for High-Efficient Perovskite Solar Cells

A multi-dimensional conductive heterojunction structure,composited by TiO2,SnO2,and Ti3C2TX MXene,is facilely designed and applied as electron transport layer in efficient and stable planar perovskite solar cells.Based on an oxygen vacancy scramble effect,the zero-dimensional anatase TiO2 quantum dots,surrounding on two-dimensional conductive Ti3C2TX sheets,are in situ rooted on three-dimensional SnO2 nanoparticles,constructing nanoscale TiO2/SnO2 heterojunctions.The fabrication is implemented in a controlled lowtemperature anneal method in air and then in N2 atmospheres.With the optimal MXene content,the optical property,the crystallinity of perovskite layer,and internal interfaces are all facilitated,contributing more amount of carrier with effective and rapid transferring in device.The champion power conversion efficiency of resultant perovskite solar cells achieves 19.14%,yet that of counterpart is just 16.83%.In addition,it can also maintain almost 85%of its initial performance for more than 45 days in 30–40%humidity air;comparatively,the counterpart declines to just below 75%of its initial performance.     

真空技术在射线源注油中的应用

本设备可对注油机的储油箱、拉模箱、溢油箱提供真空环境并对射线源抽真空和注油,注油过程中对各储油室中的绝缘油进行真空脱气、脱水,以确保注油前的性能指标,使油品达到军标、国标、国际标准.使真空技术在射线源注油技术中得到了很好的应用.通过理论计算合理配置真空系统,通过不断的探索和实践在真空系统中加装了氟里昂挡油装置,氟里昂挡油装置的设置从根本上解决了液体绝缘油在进行真空脱气、脱水过程中的一系列难题.     

浅谈油品中水分存在的危害性及检测中注意事项

水分是指存在于石油产品中的水含量,主要开采原有的炼制时存在的,水进入冰点会升高,低温下油路堵塞,高温下腐蚀设备,会起氧化反映.