Fast Chromatographic Separation of Plasticizers on Thin Layers of an Inorganic Ion-Exchanger: Quantitative Determination of Di(2-ethylhexyl)phthalate

Fast and selective separation of dimethyl phthalate, diethyl phthalate, dibutyl phthalate, di(2-ethylhexyl)phthalate (DEHP), benzyl butyl phthalate, diisodecyl phthalate, dimethyl adipate, diethyl adipate, di(2-ethylhexyl)adipate, triethyl citrate, tributyl citrate, tributyl acetyl citrate and n-butyl stearate have been developed on thin layers of inorganic ion-exchanger stannic silicate using a mixture of toluene + ethyl acetate (10:1, v/v) as mobile phase. The development distance and time were 12 cm and 25 min, respectively. Quantitative determination of DEHP was made at wavelength 280 nm by Camag TLC Scanner-3. Limit of quantitation for DEHP was 0.50 μg per zone while its limit of detection was 0.05 μg per zone.     

食品包装材料中13种增塑剂的毛细管气相色谱法测定

建立了索氏提取、固相萃取净化浓缩、毛细管气相色谱法测定塑料食品包装材料中13种增塑剂的方法.优化了固相萃取淋洗剂、洗脱剂和洗脱剂体积等参数.样品经正己烷索氏提取后,用硅胶小柱净化浓缩.以正己烷-甲苯为淋洗剂,2 mL乙酸乙酯为洗脱剂.过滤后的洗脱液用气相色谱仪分析.结果显示,13种增塑剂在0.1～1000 mg/L范围...     

Simultaneous determination of selected estrogenic endocrine disrupting chemicals and bisphenol A residues in whole milk using fabric phase sorptive extraction coupled to HPLC‐UV detection and LC‐MS/MS

A simple and sensitive analytical methodology is developed for rapid screening and quantification of selected estrogenic endocrine disrupting chemicals and bisphenol A from intact milk using fabric phase sorptive extraction in combination with high‐performance liquid chromatography coupled to ultraviolet detection/tandem mass spectrometry. The new approach eliminates protein precipitation and defatting step from the sample preparation workflow. In addition, the error prone and time‐consuming solvent evaporation and sample reconstitution step used as the sample post‐treatment has been eliminated. Parameters with most significant impact on the extraction efficiency of fabric phase sorptive extraction including sorbent chemistry, sample volume, extraction time have been thoroughly studied and optimized. Separation of the selected estrogenic endocrine disrupting chemicals including α‐estradiol, hexestrol, estrone, 17α‐ethinyl estradiol, diethylstilboestrol, and bisphenol A were achieved using a Zorbax Extend‐C18 high‐performance liquid chromatography column (15 cm × 4.6 mm, 5 μm particle size). The limit of detection values obtained in fabric phase sorptive extraction with high‐performance liquid chromatography with ultraviolet detection ranged from 25.0 to 50.0 ng/mL. The method repeatability values were 3.6–13.9 (relative standard deviation, %) and intermediate precision values were 4.6–12.7 (relative standard deviation, %). The fabric phase sorptive extraction method was also coupled to liquid chromatography with tandem mass spectrometry for identifying each endocrine disrupting chemical at 10 ng/mL.     

Heat capacities of some phthalate esters

Isobaric heat capacities C _p in the liquid phase of dimethyl phthalate, diethyl phthalate, dibutyl phthalate, bis(2-ethylhexyl) phthalate, and benzyl butyl phthalate were measured by commercial SETARAM heat conduction calorimeters. Results obtained cover the following temperature range: dimethyl phthalate 283 to 323 K, diethyl phthalate 306 to 370 K, dibutyl phthalate 313 to 447 K, bis(2-ethylhexyl) phthalate from 313 to 462 K, benzyl butyl phthalate from 313 to 383 K. The heat capacity data obtained in this work were merged with available experimental data from literature, critically assessed and sets of recommended data were developed by correlating selected data as a function of temperature. This revised version was published online in August 2006 with corrections to the Cover Date.     

污水中6种邻苯二甲酸酯的测定

采用同时蒸馏萃取法提取水样中的邻苯二甲酸二甲酯、邻苯二甲酸二乙酯、邻苯二甲酸二丁酯、邻苯二甲酸丁基苄基酯、邻苯二甲酸二正辛酯、邻苯二甲酸二(2-乙基己基)酯6种邻苯二甲酸酯,用GC-MS进行定性和定量分析.对pH值、盐度和提取时间等影响因素进行优化.当pH值为2.0,NaCl加入量为5.0 g/L和提取时间为2.5 h时,目标化合物具有较好的回收率.优化条件下6种邻苯二甲酸酯的样品加标回收率为98%～105%,相对标准偏差为1.8%～5.6%,方法检出限为8.0～200.0 ng/L.方法成功应用于城市污水中该类化合物的监测.     

Determination of some endocrine disrupter chemicals in urban wastewater samples using liquid chromatography-mass spectrometry

An analytical method for the simultaneous determination of trace amounts of fourteen endocrine disrupter chemicals (EDCs) in urban wastewater samples has been developed. The studied compounds were: bisphenol A and its chlorinated derivatives (monochloro, dichloro, trichloro and tretrachlorobisphenol A), three alkylphenols (4-n-nonyl, 4-n-octyl and 4-(tert-octyl)phenol) and six well known phthalate esters (dimethyl, diethyl, di-n-butyl, butylbenzyl, bis(2-ethylhexyl) and di-n-octylphthalate). The method involves extraction from the samples and preconcentration of the analytes using a solid-phase extraction (SPE) procedure and subsequent liquid chromatographic separation with mass spectrometric detection (LC−MS). Bisphenol F was used as a surrogate. Quantification limits found ranged between 12 ng L^− 1 for diethylphthalate and 69 ng L^− 1 for 4-(tert-octyl)phenol. The method was satisfactorily used for determination of these chemicals in urban wastewater samples of Granada City (Spain) and validated using a recovery assay with spiked samples.     

Determination of DEHP in blood products stored in plastic bags by HPLC

Summary High-performance liquid chromatography (HPLC) was used for the routine monitoring of the plasticizers di(2-ethylhexyl) phthalate (DEHP) and tri(2-ethylhexyl) trimellitate (TOTM), in blood products. It allows easy sample clean-up, solvent extraction using Celite 545 sorbent, good recoveries and opportunity to inject large number of samples without effect on column performance. The plasticizer levels were investigated in two types of poly(vinyl chloride) (PVC) bags containing whole blood plasma, platelet concentrates (PCs) during blood taking and storage.     

Simultaneous determination of five phthalate esters and bisphenol A in milk by packed‐nanofiber solid‐phase extraction coupled with gas chromatography and mass spectrometry

A novel polystyrene/pyridine composite nanofiber was synthesized and utilized as the sorbent material for the solid‐phase extraction of bisphenol A and five common phthalate esters in milk. The method of extraction integrated extraction and preconcentration of target analytes into a single step. Bisphenol A and five common phthalate esters were selected as target compounds for the development and evaluation of the method. The effects of operating parameters for nanofiber‐based solid‐phase extraction, such as selection and amount of sorbent, the volume fraction of perchlorate (precipitate protein), desorption solvent, volume of desorption solvent, and effect of salt addition were optimized. Under optimal conditions, higher extraction recoveries (89.6–118.0%) of the six compounds in milk spiked at three levels were obtained, and the satisfied relative standard deviation were ranged from 0.6 to 10.9%. The detection limits and quantification limits of the method ranged from 0.01 to 0.06 μg/L and 0.05 to 0.53 μg/L, respectively. Matrix effects were also verified and well controlled in the range of 91.3–109.3%. The new method gave better performance metrics than Chinese standard method and other published methods. Thus, the proposed method may be applied to the analysis of the phthalate esters and bisphenol A in complex matrixes.     

Determination of phthalate esters in soil by microemulsion electrokinetic chromatography coupled with accelerated solvent extraction

A novel method using microemulsion electrokinetic chromatography combining accelerated solvent extraction was developed for quantitative analysis of six phthalate esters (PAEs) including dimethyl phthalate, diethyl phthalate, dibutyl phthalate, benzyl butyl phthalate, bis(2-ethylhexyl) phthalate, as well as dioctyl phthalate. The effect of each individual component within the microemulsions, i.e. oil phase, surfactant and co-surfactant on resolution of the analytes was systematically studied. Baseline separation of six PAEs was achieved within 26?min by using the microemulsion buffer containing a 60?mmol/L borate buffer at pH 9.0, 0.5% v/v n-octane as oil droplets, 100?mmol/L sodium cholate as surfactant and 5.0% v/v 1-butanol as co-surfactant. The purposed accelerated solvent extraction-microemulsion electrokinetic chromatography method was successfully applied to the determination of trace amount of PAEs in soil samples collected from three different fields in areas of Fujian Province and the contents of dimethyl phthalate, diethyl phthalate, dibutyl phthalate, benzyl butyl phthalate, bis(2-ethylhexyl) phthalate and dioctyl phthalate were 0.63-0.68, 0.32-0.63, 2.53-3.96, 0-1.75, 7.32-11.7 and 0-3.46mg/kg, respectively. It was validated that the results were consistent with those obtained by GC-MS method.     

Covalently Linked Plasticizers: Triazole Analogues of Phthalate Plasticizers Prepared by Mild Copper‐Free “Click” Reactions with Azide‐Functionalized PVC

Copper‐free azide‐alkyne click chemistry is utilized to covalently modify polyvinyl chloride (PVC). Phthalate plasticizer mimics di(2‐ethylhexyl)‐1H‐triazole‐4,5 dicarboxylate (DEHT), di(n‐butyl)‐1H‐1,2,3‐triazole‐4,5‐dicarboxylate (DBT), and dimethyl‐1H‐triazole‐4,5‐dicarboxylate (DMT) are covalently attached to PVC. DEHT, DBT, and DMT have similar chemical structures to traditional plasticizers di(2‐ethylhexyl) phthalate (DEHP), di(n‐butyl) phthalate (DBP), and dimethyl phthalate (DMP), but pose no danger of leaching from the polymer matrix and forming small endocrine disrupting chemicals. The synthesis of these covalent plasticizers is expected to be scalable, providing a viable alternative to the use of phthalates, thus mitigating dangers to human health and the environment.

     

Occurrence of endocrine-disrupting compounds in reclaimed water from Tianjin,China

Continuous disposal of endocrine-disrupting compounds (EDCs) into the environment can lead to serious human health problems and can affect plants and aquatic organisms. The determination of EDCs in water has become an increasingly important activity due to our increased knowledge about their toxicities, even at low concentration. The EDCs in water samples from the reclaimed water plant of Tianjin, northern China, were identified by gas chromatography (GC)–mass spectrometry (MS). Important and contrasting EDCs including estrone (E1), 17β-estradiol (E2), 17α-ethynylestradiol (EE2), 4-tert-octylphenol (OP), 4-nonylphenol (NP), bisphenol A (BPA), di-n-butyl phthalate (DnBP), diisobutyl phthalate (DIBP), and di(2-ethylhexyl)phthalate (DEHP) were selected as the target compounds. Concentrations of steroid hormones, alkylphenolic compounds and phthalates ranged from below the limit of detection (LOD) to 8.1 ng L⁻¹, from <LOD to 14.2 ng L⁻¹, and from 1.00 μg L⁻¹ to 23.8 μg L⁻¹, respectively. The average removal efficiencies for target EDCs varied from 30% to 82%. These results indicate that environmental endocrine disrupting compounds are not completely removed during reclaimed water treatment and may be carried over into the general aquatic environment.     

Polypyrrole‐coated alginate/magnetite nanoparticles composite sorbent for the extraction of endocrine‐disrupting compounds

Magnetite nanoparticles incorporated into alginate beads and coated with a polypyrrole adsorbent were prepared (polypyrrole/Fe₃O₄/alginate bead) and used as an effective magnetic solid‐phase extraction sorbent for the extraction and enrichment of endocrine‐disrupting compounds (estriol, β‐estradiol and bisphenol A) in water samples. The determination of the extracted endocrine‐disrupting compounds was performed using high‐performance liquid chromatography with a fluorescence detector. The effect of various parameters on the extraction efficiency of endocrine disrupting compounds were investigated and optimized including the type and amount of sorbent, sample pH, extraction time, stirring speed, and desorption conditions. Under optimum conditions, the calibration curves were linear in the concentration range of 0.5–100.0 μg/L, and the limit of detection was 0.5 μg/L. The developed method showed a high extraction efficiency, the recoveries were in the range of 90.5 ± 4.1 to 98.2 ± 5.5%. The developed sorbent was easy to prepare, was cost‐effective, robust, and provided a good reproducibility (RSDs < 5%), and could be reused 16 times. The developed method was successfully applied for the determination of endocrine‐disrupting compounds in water samples.     

气相色谱-三重四极杆质谱法同时测定生脉饮中17种邻苯二甲酸酯类化合物的残留量

建立了气相色谱-三重四极杆质谱（GC-QQQ MS）同时测定生脉饮中17种邻苯二甲酸酯类化合物（PAE）残留量的方法。样品经正己烷振摇提取后进行检测。采用Agilent HP-5MS毛细管色谱柱（30 m×0.25 mm×0.25 μm）在程序升温条件下进行色谱分离;质谱以电子轰击（EI）为电离方式,采用多反应监测（MRM）模式进行监测。实验结果表明：17种PAE在0.5~20 mg/L范围内呈线性关系,r均大于0.99;平均加标回收率除邻苯二甲酸二甲酯（DMP）为51.9%、邻苯二甲酸二乙酯（DEP）为77.2%外,其余15种为91.8%~117.2%,RSD（n=6）为0.5%~5.4%。该方法操作简便,准确可靠,灵敏度高,专属性强,可用于生脉饮中邻苯二甲酸酯类化合物残留量的检测,以控制生脉饮的用药安全。     

Dispersive liquid–liquid microextraction of phenolic compounds from vegetable oils using a magnetic ionic liquid

A novel method was developed for the determination of two endocrine‐disrupting chemicals, bisphenol A and 4‐nonylphenol, in vegetable oil by dispersive liquid–liquid microextraction followed by ultra high performance liquid chromatography with tandem mass spectrometry. Using a magnetic liquid as the microextraction solvent, several key parameters were optimized, including the type and volume of the magnetic liquid, extraction time, amount of dispersant, and the type of reverse extractant. The detection limits for bisphenol A and 4‐nonylphenol were 0.1 and 0.06 μg/kg, respectively. The recoveries were 70.4–112.3%, and the relative standard deviations were less than 4.2%. The method is simple for the extraction of bisphenol A and 4‐nonylphenol from vegetable oil and suitable for routine analysis.     

A novel method to prepare monolithic molecular imprinted polymer fiber for solid‐phase microextraction by microwave irradiation†

In this paper, a new approach to prepare monolithic molecularly imprinted polymer (MIP) fibers for solid‐phase microextraction is proposed with the help of microwave irradiation. Imprinting polymerization was carried out within silica capillaries in 4.5 min, using dimethyl phthalate (DMP) as a template molecular, α‐methacrylic acid as a functional monomer and ethylene dimethacrylate as a crosslinker, acetonitrile as the porogenic solvent. The synthesis was optimized by varying the ratio of template/monomer and different volume of porogen. The resulted MIP fibers were obtained after silica being etched away with a controlled length of 1 cm, and subsequently characterized by SEM. In order to increase the selective extraction of DMP, factors affecting the extraction including extraction time, salt concentration, desorption time, and desorption solvents were investigated for solid‐phase microextraction procedures in detail. The selectivity coefficients, defined as the extraction amount ratio of MIP to its nonimprinting fiber, were 5.6, 2.6, and 1.4 for DMP and its counterpart including dibutyl phthalate and di‐n‐octylo‐phthalate, respectively. The resulted fibers were also applied to detect DMP, dibutyl phthalate, and di‐n‐octylo‐phthalate in bottled beverage samples coupled to HPLC and resulted in relative recoveries of up to 73.8–98.5%, respectively.     

Determination of phthalate esters in cow milk samples using dispersive liquid-liquid microextraction coupled with gas chromatography followed by flame ionization and mass spectrometric detection

A simple and economic method for the analysis of phthalate esters, dimethyl phthalate, diethyl phthalate, di-iso-butyl phthalate, di-n-butyl phthalate, and di-2-ethylhexyl phthalate in cow milk samples by means of gas chromatography-flame ionization detection and gas chromatography-mass spectrometry has been developed. In this work, NaCl and ACN were added to 5 mL of the milk sample as the salting out agent and extraction solvent, respectively. After manual shaking, the mixture was centrifuged. In the presence of NaCl, a two-phase system was formed: upper phase - acetonitrile containing phthalate esters -and lower phase - aqueous phase containing soluble compounds and the precipitated proteins. After the extraction of phthalate esters from milk, a portion of supernatant phase (acetonitrile) was removed, mixed with 1,2-dibromoethane at microliter level and injected by syringe into NaCl solution. After the extraction of the selected phthalate esters into 1,2-dibromoethane, phase separation was performed by centrifugation and the enriched analytes in the sedimented phase were determined by gas chromatography-flame ionization detection and gas chromatography-mass spectrometry. Under the optimum extraction conditions, low limits of detection and quantification between 1.5-3 and 2.5-11 ng/mL, respectively was observed. Enrichment factors were in the range of 397-499. The relative standard deviations for the extraction of 100 ng/mL of each phthalate ester were in the range of 3-4% (n = 6). Finally, some milk samples were successfully analyzed using the proposed method and two analytes, di-n-butyl phthalate and di-2-ethylhyxel phthalate, were determined in them in nanogram per milliliter level.     

Rapid Determination of Phenolics in Food Packaging by Magnetic Solid-Phase Extraction and High-Performance Liquid Chromatography

A method for magnetic solid-phase extraction was developed for the preconcentration of bisphenol A, bisphenol AF, tetrabromobisphenol A, and 4-tert-octylphenol from food containers and packaging materials. Cetyltrimethylammonium bromide was added to a solution of magnetic nanoparticles to enhance adsorption of the analytes prior to high-performance liquid chromatography. The effects of the amount of surfactant, the amount of magnetic nanoparticles, the pH, the adsorption time, the desorption solution, and the reuse of the extractant were optimized. The linear dynamic ranges were from 0.05 to 25 milligrams per liter. The limits of detection were between 1.21 and 2.48 micrograms per liter, the limits of quantification were from 4.03 to 8.27 micrograms per liter, and the relative standard deviations were between 2.2 and 4.1 percent. This magnetic solid-phase extraction approach was successfully employed for the analysis of plastics with recoveries from 88.0 to 101.1 percent and relative standard deviations between 2.3 and 5.4 percent.     

HPLC with diode-array detection for the simultaneous determination of di(2-ethylhexyl)phthalate and mono(2-ethylhexyl)phthalate in seminal plasma

A high-performance liquid chromatographic method for the simultaneous determination of di(2-ethylhexyl)phthalate (DEHP) and its major metabolite mono(2-ethylhexyl)phthalate (MEHP) in seminal plasma was developed and validated. The method involves liquid-liquid extraction followed by isocratic reversed-phase chromatography with diode-array detection. The recovery, selectivity, linearity, precision and accuracy of the method were evaluated from the analysis of spiked seminal plasma samples. The effect of mobile-phase composition and pH on the retention of the target analytes was investigated. The limits of detection were 0.010 and 0.015 microg/mL, for DEHP and MEHP, respectively. This method was used to analyze real samples in support of clinical studies on these potential endocrine disruptors.     

Micro-determination of total phthalate esters in biological samples by gas-liquid chromatography.

A method was investigated in which all of the phthalate esters in biological samples were determined as phthalic acid by gas-liquid chromatography. The method is based on the separation of phthalate esters from the sample with n-hexane, saponification of the esters with an alkaline ethanolic solution to give phthalic acid, purification of the acid by extraction with diethyl ether and column chromatography using silica gel, and conversion of the acid into bis(2,2,2-trifluoroethyl) phthalate with a 2,2,2-trifluoroethanol solution containing boron trifluoride. The derivative obtained is highly sensitive to an electron-capture detector, giving a sensitivity of 0.1 pg. Biological samples fortified with di(2-ethylhexyl) phthalate at levels of 5-100 ppb were analyzed, with recoveries of 70-100%.     

Molecularly imprinted microspheres and nanospheres for di(2-ethylhexyl)phthalate prepared by precipitation polymerization

Molecularly imprinted microspheres (MIMs, >3 μm) and nanospheres (MINs, ≈450 nm) for the environmental endocrine disruptor di(2-ethylhexyl)phthalate (DEHP) were prepared by a precipitation polymerization (PP) procedure. The effect of the dispersive solvents acetonitrile (ACN) and cyclohexane (CH), the cross-linkers ethylene glycol dimethacrylate (EDMA) and trimethylpropane trimethacrylate (TRIM), and the template on particle size and morphology of polymers was investigated in detail by scanning electron microscopy (SEM) and BET adsorption isotherm determination. When used as HPLC stationary phase, the microspheres exhibited strong affinity for the template DEHP with an imprint factor (IF) higher than 8.0 in ACN/water (60:40, v/v) as mobile phase. Furthermore, baseline separation of DEHP from benzyl butyl phthalate (BBP) and dibutyl phthalate (DBP) could be achieved. In contrast, no or only poor separation could be observed with non-imprinted polymeric polymers (NIPs) or imprinted bulk polymers (MIB), respectively. Similarly, the obtained MINs exhibited an imprinting effect in pure ACN, i.e. the bond amount of DEHP was significantly higher compared to NIPs, as was shown in rebinding experiments. Besides their use as an HPLC stationary phase, MIMs might further be applicable for SPE sample cleanup, while MINs could be used as a recognition layer on sensor surfaces. Figure Molecularly imprinting of di(2-ethylhexyl)phthalate (DEHP)