Co oxidation with oxygen in the presence of hydrogen on CoO/CeO<Subscript>2</Subscript> and CuO/CoO/CeO<Subscript>2</Subscript> catalysts

The catalytic activity of the CoO/CeO₂ and CuO/CoO/CeO₂ systems in selective CO oxidation in the presence of hydrogen at 20–450°C ([CuO] = 1.0–2.5%, [CoO] = 1.0–7.0%) is reported. The maximum CO conversion (X) decreases in the following order: CuO/CoO/CeO₂ (X = 98–99%, T = 140–170°C) > CoO/CeO₂ (X = 67–84%, T = 230–240°C) > CeO₂ (X = 34%, T = 350°C). TPD, TPR, and EPR experiments have demonstrated that the high activity of CuO/CoO/CeO₂ is due to the strong interaction of the supported copper and cobalt oxides with cerium dioxide, which yields Cu-Co-Ce-O clusters on the surface. The carbonyl group in the complexes Co^δ+-CO and Cu⁺-CO is oxidized by oxygen of the Cu-Co-Ce-O clusters at 140–160°C and by oxygen of the Co-Ce-O clusters at 240°C. The decrease in the activity of the catalysts at high temperatures is due to the fact that hydrogen reduces the clusters on which CO oxidation takes place, yielding Co⁰ and Cu⁰ particles, which are inactive in CO oxidation. The hydrogenation of CO into methane at high temperatures is due to the appearance of Co⁰ particles in the catalysts.     

Thermal stability and surface structure of Mo/CeO<Subscript>2</Subscript> and Ce-doped Mo/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts

In order to explore the influence of CeO₂ on the structure and surface characteristics of molybdena, an investigation was undertaken by using N₂ adsorption (BET method), thermal analysis and in-situ diffuse reflectance infrared (DRIFT) techniques. In this work, the Mo/CeO₂ and Ce-Mo/Al₂O₃ samples were prepared by impregnation and co-precipitation methods with high Mo loadings. Combining the results one may notice that the presence of ceria led to the increase of polymerized surface Mo species so as to forming Mo-O-Ce linkages besides the formation of coupled O=Mo=O bonds indicative of polymeric MoO₃. From thermal analysis, it can be inferred that Mo/Al₂O₃ is the thermally most stable material in the temperature range used in the experiment (up to 900°C), whereas Ce-Mo/Al₂O₃ and Mo/CeO₂ samples undergo morphological modifications above 700°C resulting in lattice defects, which motivate the mobility of Mo and Ce ions and thus enhance the possibility of interaction between them. Additionally, their activity towards CO adsorption needs reduced ceria and molybdena containing coordinatively unsaturated sites (CUS), oxygen vacancies and hydroxyl groups to form various carbonate species.     

Underpotential surface reduction of mesoporous CeO<Subscript>2</Subscript> nanoparticle films

The formation of variable-thickness CeO₂ nanoparticle mesoporous films from a colloidal nanoparticle solution (approximately 1–3-nm-diameter CeO₂) is demonstrated using a layer-by-layer deposition process with small organic binder molecules such as cyclohexanehexacarboxylate and phytate. Film growth is characterised by scanning and transmission electron microscopies, X-ray scattering and quartz crystal microbalance techniques. The surface electrochemistry of CeO₂ films before and after calcination at 500 °C in air is investigated. A well-defined Ce(IV/III) redox process confined to the oxide surface is observed. Beyond a threshold potential, a new phosphate phase, presumably CePO₄, is formed during electrochemical reduction of CeO₂ in aqueous phosphate buffer solution. The voltammetric signal is sensitive to (1) thermal pre-treatment, (2) film thickness, (3) phosphate concentration and (4) pH. The reversible ‘underpotential reduction’ of CeO₂ is demonstrated at potentials positive of the threshold. A transition occurs from the reversible ‘underpotential region’ in which no phosphate phase is formed to the irreversible ‘overpotential region’ in which the formation of the cerium(III) phosphate phase is observed. The experimental results are rationalised based on surface reactivity and nucleation effects.     

Performance and characterisation of CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>-WO<Subscript>3</Subscript> catalysts for selective catalytic reduction of NO with NH<Subscript>3</Subscript>

Ce-Ti-W-O _x catalysts were prepared and applied to the NH₃-selective catalytic reduction (SCR) reaction. The experimental results showed that the Ce-Ti-W-O _x catalyst prepared by the hydrothermal method exhibited higher NO conversion than those synthesised via the sol-gel and impregnating methods, while the optimal content of WO₃ and molar ratio of Ce/Ti were 20 mass % and 4: 6, respectively. Under these conditions, the catalyst exhibited the highest level of catalytic activity (the NO conversion reached values higher than 90 %) across a wide temperature range of 225–450°C, with a range of gas hourly space velocity (GHSV) of 40000–140000 h^?1. The catalyst also exhibited good resistance to H₂O and SO₂. The influences of morphology, phase structure, and surface properties on the catalytic performance were investigated by N₂ adsorption-desorption measurement, XRD, XPS, H₂-TPR, and SEM. It was found that the high efficiency of NO removal was due to the large BET surface area, the amorphous surface species, the change to element valence states, and the strong interaction between Ce, Ti, and W.     

Synergetic effect in PdAu/CeO<Subscript>2</Subscript> catalysts for the low-temperature oxidation of CO

Gold-palladium catalysts supported on cerium oxide were synthesized with the double complex salts. X-ray photoelectron spectroscopy (XPS) and other physicochemical methods (TEM, TPR) were used to demonstrate that synthesis of highly active palladium catalysts requires the oxidative treatment stimulating the formation of a catalytically active surface solid solution Pd _x Ce_1?x O₂, which is responsible for the lowtemperature activity (LTA) in the reaction CO + O₂. In the case of gold catalysts, active sites for the lowtemperature oxidation of CO are represented by gold nanoparticles and its cationic interface species. Simultaneous deposition of two metals increases the catalyst LTA due to interaction of both gold and palladium with the support surface to form a Pd_1?x CexO₂ solid solution and cationic interface species of palladium and gold on the boundary of Pd-Au alloy particles anchored on the solid solution surface.     

Colloidal properties of CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> hydrosols

CeO₂-ZrO₂ hydrosols are synthesized and the size, shape, phase composition, density, and electrophoretic mobility of particles are studied. The pH ranges of the stability of hydrosols and the thresholds of their fast coagulation in the presence of some electrolytes are determined. The nature of the aggregation stability of CeO₂-ZrO₂ hydrosols is discussed.     

Synthesis of highly ordered mesoporous CeO<Subscript>2</Subscript> and low temperature CO oxidation over Pd/mesoporous CeO<Subscript>2</Subscript>

Highly ordered mesoporous cerium dioxide (meso-CeO₂) was successfully synthesized using a facile solvent-free infiltration method from a mesoporous silica template, KIT-6. The meso-CeO₂ material, thus obtained, exhibited well-defined mesostructure and high surface area (153 m² g⁻¹). The physicochemical properties of meso-CeO₂ material and Pd-supported on meso-CeO₂ (Pd/meso-CeO₂) were characterized by electron microscopy, X-ray diffraction, N₂ adsorption–desorption, and temperature-programmed experiments. The Pd/meso-CeO₂ catalyst exhibited excellent catalytic activity for CO oxidation compared with those of other Pd/CeO₂ catalysts which were prepared using nanocrystalline CeO₂ and bulk-CeO₂ as the supports. Moreover, a hydrogen pretreatment of the Pd/meso-CeO₂ catalyst resulted in a remarkable increase of catalytic activity (T ₁₀₀ = 52 °C).     

Photocatalytic reduction of CO<Subscript>2</Subscript> over TiO<Subscript>2</Subscript> based catalysts

At present, carbon dioxide is considered the largest contributor among greenhouse gases. This review covers the current state of problem of carbon dioxide emissions from industrial and combustion processes, the principle of photocatalysis, existing literature related to photocatalytic CO₂ reduction over TiO₂ based catalysts and the effects of important parameters on the process performance including light wavelength and intensity, type of reductant, metal-modified surface, temperature and pressure. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

CeO<Subscript>2</Subscript>-catalyzed ozonation of phenol

Three different cerium citrate-based precursors were used for synthesizing CeO₂ through thermal treatment. Three morphological types of CeO₂ were obtained. Characterization of these oxides was carried out by XRD patterns, SEM microscopy, N₂ adsorption isotherms, Raman spectroscopy, zeta potential, and UV/Vis luminescence. Ozonation of phenol catalyzed by CeO₂ was studied as a representative reaction of environmental interest. The differences on the catalytic activity showed by these three oxides could be correlated to amounts of Ce³⁺ on CeO₂ surface and, consequently, to the demand for oxygen needed to burn each precursor.     

CO oxidation over Au/CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> catalists: The effect of the support composition of the au-support interaction

The effect of the support composition on the Au-support interactions and its role in the creation of the activity of Au/CeO₂-ZrO₂ catalysts in CO oxidation has been studied. The CeO₂-ZrO₂ oxides and Au/CeO₂-ZrO₂ catalysts were synthesized, characterized by BET, XRD, HRTEM, AAS, TPR-H₂, and tested in CO oxidation. An approximate evaluation of the H₂ consumption for the surface reduction of the studied samples was estimated applying the model developed by Johnson and Mooi, which is based on the qualitative relationship between the amount of the capping oxygen and BET surface area. The sequence of the increasing percentage of O₂ atoms in the capping peak to the total Ce atoms follows the sequence of the decreasing Zr/Ce molar ratio in the sample. The activity of Au/CeO₂-ZrO₂ catalysts depends on the support composition and increases with the decrease in Zr/Ce molar ratio.     

Carbon black oxidation mechanism in loose and tight contacts with Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and CeO<Subscript>2</Subscript> catalysts

The catalytic combustion of carbon black was investigated in the presence of CeO₂ and Al₂O₃. The influence of contact type between carbon particles and these oxides was examined by thermal analysis, the BET specific area, and EPR spectroscopy. For tight contact carbon black-catalyst mixtures, a new paramagnetic species is observed and can be considered as a fingerprint of the contact between the two solids. These new paramagnetic species increase the reactivity of the catalytic reaction of carbon black (CB) combustion and take part in the oxidation mechanism of CB. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 6, pp. 899–904. This article was submitted by the authors in English.     

Thermal synthesis of the CeO<Subscript>2</Subscript>-PrO<Subscript>2</Subscript>-Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>pigments

Summary The synthesis of new compounds based on the CeO₂-PrO₂-Nd₂O₃system, which can be used as pigments for colouring of ceramic glazes, is investigated in our laboratory. The optimum conditions for the syntheses of these compounds have been estimated. The methods of thermal analysis provided first information about the temperature region of the formation of the pigments investigated. The synthesis of these compounds was followed by thermal analysis using STA 449/C Jupiter (Netzsch, Germany).     

ESR Study of the Formation of O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> Radical Anions on Oxidized CeO<Subscript>2</Subscript> and CeO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> Adsorbing a CO + O<Subscript>2</Subscript> Mixture

It is demonstrated by ESR measurements that O ₂ ⁻ (CO + O₂) radical anions result from CO + O₂ adsorption on the oxidized surface of CeO₂. These radical anions are stabilized in the coordination sphere of Ce⁴⁺ cations located in isolated and associated anionic vacancies. This reaction shows an activation behavior determined by CO adsorption. The variation of O ₂ ⁻ (CO + O₂) concentration with CO adsorption temperature suggests that surface carbonates and carboxylates participate in this reaction. In the (0.5– 10.0)%CeO₂/ZrO₂ system, O ₂ ⁻ forms on supported CeO₂ and is stabilized on Ce⁴⁺ and Zr⁴⁺ cations. The stability of O ₂ ⁻ -Ce⁴⁺ complexes is lower on supported CeO₂ than on unsupported CeO₂, indicating a strong interaction between the cerium cations and the support.__________Translated from Kinetika i Kataliz, Vol. 46, No. 3, 2005, pp. 423–429.Original Russian Text Copyright © 2005 by Il’ichev, Kuli-zade, Korchak.     

Platinum state in highly active Pt/CeO<Subscript>2</Subscript> catalysts from the X-ray photoelectron spectroscopy data

The states of components of highly efficient Pt/CeO₂ catalysts for low-temperature oxidation of carbon monoxide are studied in detail by X-ray photoelectron spectroscopy (XPS). Using the precise calibration of the spectra relative to the internal standard and the fitting of Ce3d and Pt4f spectra by elementary doublets, we found the features of the platinum interaction with the ceria lattice. It is shown that when the codeposition technique is used, depending on the quality of stock solutions, it is possible to obtain both homogeneous solid solutions of platinum in the ceria lattice and solutions containing polyatomic platinum associates of the (PtO) _m type. It is found that when homogeneous PtCeO _x solid solutions are stored in air at room temperature, the homogeneous solutions slowly pass into the state of solutions with platinum associates. Mechanical mixtures of metallic platinum and ceria nanoparticles, synthesized by laser ablation, were also investigated in the course of their annealing in the air. The results obtained from the Pt4f spectra completely confirm the specific features of the interaction of platinum with ceria.     

Effect of the microstructure of the supported catalysts CuO/TiO<Subscript>2</Subscript> and CuO/(CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>) on their catalytic properties in carbon monoxide oxidation

The effect of the microstructure of titanium dioxide on the structure, thermal stability, and catalytic properties of supported CuO/TiO₂ and CuO/(CeO₂-TiO₂) catalysts in CO oxidation was studied. The formation of a nanocrystalline structure was found in the CuO/TiO₂ catalysts calcined at 500°C. This nanocrystalline structure consisted of aggregated fine anatase particles about 10 nm in size and interblock boundaries between them, in which Cu²⁺ ions were stabilized. Heat treatment of this catalyst at 700°C led to a change in its microstructure with the formation of fine CuO particles 2.5–3 nm in size, which were strongly bound to the surface of TiO₂ (anatase) with a regular well-ordered crystal structure. In the CuO/(CeO₂-TiO₂) catalysts, the nanocrystalline structure of anatase was thermally more stable than in the CuO/TiO₂ catalyst, and it persisted up to 700°C. The study of the catalytic properties of the resulting catalysts showed that the CuO/(CeO₂-TiO₂) catalysts with the nanocrystalline structure of anatase were characterized by the high-est activity in CO oxidation to CO₂.     

Three-dimensional hierarchical CeO<Subscript>2</Subscript> nanowalls/TiO<Subscript>2</Subscript> nanofibers heterostructure and its high photocatalytic performance

Combining the versatility of electrospinning technique and hydrothermal growth of nanostructures enabled the fabrication of hierarchical CeO₂/TiO₂ nanofibrous mat. The as-prepared hierarchical heterostructure consisted of CeO₂ nanowalls growing on the primary TiO₂ nanofibers. Interestingly, not only were secondary CeO₂ nanowalls successfully grown on TiO₂ nanofibers substrates, but also the CeO₂ nanowalls were uniformly distributed without aggregation on TiO₂ nanofibers. The photocatalytic studies suggested that the CeO₂/TiO₂ heterostructures showed enhanced photocatalytic efficiency compared with bare TiO₂ nanofibers under UV light irradiation.     

Synthesis of CeO<Subscript>2</Subscript>-ZrO<Subscript>2</Subscript> hydrosols via peptization at elevated temperature

A method for synthesizing aggregation-stable CeO₂-ZrO₂ hydrosols with different particle compositions is developed based on the peptization of hydrated oxide precipitates at elevated temperature. It is shown that, by varying heat treatment time, sols can be obtained with particles that have different degrees of crystallinity and sizes of no larger than 6 nm.     

Porous CeO<Subscript>2</Subscript> nanorod-catalyzed synthesis of poly-substituted imino-pyrrolidine-thiones

Porous CeO₂ nanorod has been used as efficient and recyclable heterogeneous catalyst for the synthesis of highly functionalized imino-pyrrolidine-thiones via the reaction of aromatic aldehyde (especially one bearing an electron-donating group), malononitrile, isocyanide and unactivated weakly acidic heterocyclic thiophenol. The high catalytic efficiency of porous CeO₂ nanorod in this reaction was discussed preliminarily based on their morphology and structure.