非等幅OTDM信号的全光时钟提取

理论上推导了非等幅均匀复用的OTDM信号中时钟分量与各路脉冲幅度的关系式,并分别从频域和时域的角度给出了利用以半导体光放大器（SOA）作为调制器的锁模光纤激光器进行时钟提取的物理机制,对时钟提取的物理过程给出了形象解释.实验上通过利用锁模光纤激光器成功地从非等幅均匀复用的8×2.5 GHz OTDM信号中提取了2.5 GHz单路时钟和20 GHz群路时钟光脉冲.利用该方案提取的时钟脉冲稳定性好,对偏振态不敏感,是较理想的时钟源.此技术可用于高速OTDM信号的时钟提取.     

时分复用信号中的全光时钟提取实验

利用非均匀复用后的时分复用 (OTDM)信号 ,从 4× 2 .5GHz的时分复用光脉冲信号中直接提取出复用前的2 5GHz分路时钟信号。此技术可用于高速率时分复用光纤通信系统的解复用中的时钟提取。     

基于光注入Fabry-Perot半导体激光器实现同步全光分路时钟提取与波长转换

提出了一种利用Fabry-Perot（FP）半导体激光器同步提取波长转换的分路光时钟的新方法,并对该方法进行了数值模拟和实验验证.光注入半导体激光器会产生非线性单周期振荡特性,利用交叉增益调制效应及对单周期振荡的微波锁频效应,可从光时分复用信号中提取出波长转换的分路光时钟.采用一个FP半导体激光器作为全光分路时钟提取及波长转换器,数值模拟实现了从波长为1555 nm、速率为2×20 Gb/s的光时分复用信号中提取出波长转换为1550 nm、重复频率为20 GHz的分路光时钟,实验完成了从波长为155024 nm、重复频率为1236 GHz光脉冲信号中提取出相位噪声为-105 dBc/Hz的波长为154591 nm、重复频率618 GHz的分频光时钟.此外还详细研究了注入光功率、波长失谐、FP激光器偏置电流及纵模选择对光时钟提取的影响,实验结果和数值模拟结果符合.该方法在光时分复用混合波分复用通信系统中实现全光解复用及波长路由有着重要的应用价值. 关键词： 波长转换 时钟提取 光注入 非线性动力学     

光时分复用系统中单路时钟的提取

提出利用复用信号的时候不均匀性,采用主动光纤锁模激光器,直接从复用后的信号中提取出复用前的时钟光脉冲。考虑到电的时分复用与光的时分复用在机理上的一致性,故初步复用时分复用信号进行实验,成功地从时分复用信号中得到了复用前的时钟光脉冲。此处电的时分复用所得的结论适用于光的时分复用。     

基于光电反馈环单元时钟提取与解复用的160Gb/s OTDM信号100km传输

提出了一种能够同时对高速光时分复用技术信号解复用与时钟提取的光电反馈环单元.在接收端,采用光电反馈环单元,信号单次通过即可同时完成160Gb/s到10Gb/s的解复用与时钟提取:两级电吸收调制器级联工作方式缩减了采样窗口宽度,满足了解复用小于6.25ps超窄采样窗口的要求;而闭合环路的锁相同步工作方式,使所提取的时钟信号抖动(JitterRMS)由2.4ps降至450fs.基于该结构,实验上成功实现了无误码的100km160Gb/s光时分复用技术传输及传输后无误码地解复用与时钟提取,功率代价小于3dB.     

基于光电反馈环单元时钟提取与解复用的160 Gb/s OTDM 信号100 km传输

提出了一种能够同时对高速光时分复用技术信号解复用与时钟提取的光电反馈环单元.在接收端,采用光电反馈环单元,信号单次通过即可同时完成160 Gb/s到10 Gb/s的解复用与时钟提取：两级电吸收调制器级联工作方式缩减了采样窗口宽度,满足了解复用小于6.25 ps超窄采样窗口的要求|而闭合环路的锁相同步工作方式,使所提取的时钟信号抖动（Jitter RMS）由2.4 ps降至450 fs.基于该结构,实验上成功实现了无误码的100 km 160 Gb/s光时分复用技术传输及传输后无误码地解复用与时钟提取,功率代价小于3 dB.     

10 GHz全光帧时钟提取的理论和实验研究

提出了一种新型的10 GHz全光帧时钟提取的提取方案。采用低精细度的法布里-珀罗(F-P)滤波器直接提出帧时钟,保证帧时钟的快速建立和快速消失。利用半导体光放大器(SOA)的自增益调制效应(SGM)对法布里-珀罗滤波器提取的帧时钟进行整形,降低帧时钟的幅度噪声。并推导了法布里-珀罗滤波器的精细度和半导体光放大器的自增益调制效应对帧时钟建立时间、消失时间的影响。通过理论分析表明,利用半导体光放大器的自增益调制效应可以降低帧时钟的幅度噪声并加快帧时钟建立速度。实验中,用上述方案对10.075 GHz的帧信号进行了全光帧时钟提取,得到了建立时间为8个信号周期,消失时间为22个信号周期,抖动为2.35 ps的帧时钟信号。     

高双折射光纤环镜改善40 GHz光时钟消光比的研究

时钟信号的好坏在同步、解复用和光判决中起着决定性的作用,双折射光纤环镜具有灵活可调的滤波特性,光时钟信号通过双折射环形镜可以使其消光比得到改善,从而提高时钟信号的质量。为此提出了利用高双折射光纤环形镜提高光时钟信号消光比的方案,数值上模拟了环形镜透射谱随双折射器件偏振延时量(Δt)、偏振控制器快慢轴角度以及偏振控制器所引入光程差的变化而变化的情况,并理论分析了消光比不理想的时钟信号经过环形镜后的光谱形式。用法布里-珀罗滤波器提取的40 GHz时钟信号进行实验,时钟经过环形镜后消光比改善了13 dB,实验结果和理论模拟得到了很好的匹配。     

一种无需相位比较器的超高速光时分复用系统的自时钟恢复方法(英文)

基于带内时钟导引的置入与提取,提出一种在超高速时分复用系统中的自时钟恢复方案.通过在发送端插入带内时钟导引并在接收端提取出该时钟导引,实现系统时钟的瞬时同步恢复,无需传统时钟恢复中的超快相位比较器和锁相环.实验分别演示了由相位调制和强度调制构造的时钟导引,结果表明所提方法可实现160~40Gb/s的无误码解复用.该方法在光发射机之后和光接收机之前的光域内对数据信号进行预处理,简化了时钟恢复,同时并未改变光发射机和光接收机的原理、结构和设计,与现行的光纤通信系统兼容.     

基于注入锁模激光器的40 Gb/s全光时钟提取

利用注入锁模光纤激光器进行时钟提取实验,成功地从40Gb／s伪随机码信号中提取出了40GHz时钟信号。实验中,在注入信号进入环形腔之前先通过一个马赫-曾德尔（M-z）干涉仪,提高了注入信号中时钟频谱分量的相对大小,从而有利于时钟信号的提取。首先从10Gb／s伪随机码信号中提取出波形很好的10GHz时钟信号,并在此基础上从复用后的40Gb／s伪随机码信号中提取出了40GHz时钟信号。     

Novel scheme of clock recovery for high-speed OTDM signals based on stimulated Brillouin scattering

A new but simply implemented optical clock recovery scheme for optical time-division multiplexing （OTDM） systems based on stimulated BriUouin scattering （SBS） effect is presented and demonstrated experimentally. According to the unequal-amplitude even-multiplexed OTDM signals, the frame clock is extracted. In addition, the clock with multiple tributary rates is recovered from 160-Gb/s OTDM signal in simulation by utilizing the clock recovery module.     

Clock recovery from 40 Gbps optical signal with optical phase-locked loop based on a terahertz optical asymmetric demultiplexer

10 GHz clock recovery from 40 Gbps optical time-division-multiplexed (OTDM) signal pulses is experimentally demonstrated using optical phase lock loop based on a terahertz optical asymmetric demultiplexer (TOAD) with a local-reference-oscillator-free electronic feedback circuit. The clock pulse that was used as the control pulse had energy of 800 fJ and the SNR of the time-extracted 10 GHz RF signal to the side components was larger than 40 dB.     

All-optical frequency multiplication/recovery based on a semiconductor optical amplifier ring cavity

A novel scheme for all-optical frequency multiplication/recovery based on a semiconductor optical amplifier ring cavity is proposed and investigated numerically. The results show, for a 2.5 GHz driving pulse train, it can be generated 5-25 GHz repetition rate pulse trains with low clock amplitude jitter, polarization independence and high peak power. Furthermore, the extraction of the clock signal from a pseudorandom bit sequence signal can be realized based on the proposed scheme.     

40 Gbit/s all-optical clock recovery based on the injection mode-locked fiber ring laser

All-optical clock recovery is a key technology in all-optical 3R (Re-timing, Re-shaping, Re-amplifying) regeneration. In this paper, we demonstrate an all-optical clock recovery circuit based on injection mode-locked fiber laser. We have successfully extracted 40 GHz optical clock pulse from 40 Gb/s pseudorandom signal. Before the injected signal goes into the ring cavity, we make it pass a Mach–Zender interferometer (MZI) firstly. And thereby the clock component in the injected signal has been increased relatively, which is benefit to the clock recovery. We obtain firstly 10 GHz clock signal with perfect waveform from 10 Gb/s pseudorandom data stream, and then we extract 40 GHz clock signal from 40 Gb/s pseudorandom signal.     

Novel Technique for All-Optical Clock Extraction Using Fiber Bragg Gratings

We demonstrate a simple passive technique, using phase shifted fibre Bragg gratings, for extraction of optical clock signals from RZ optical data signals . The generation of an optical clock signal at 12.5 GHz from a 12.5 Gbs RZ optical data stream is experimentally demonstrated with simulation of optical clock extraction at 10 GHz fro m 40 Gbs OTDM data streams .     

Asymmetric Nonlinear Optical Loop Mirror for All Optical Clock Extraction in Self-clocked Optical Transparent OTDM Network

１ＩｎｔｒｏｄｕｃｔｉｏｎＡｓａｅｆｅｃｔｉｖｅｗａｙｔｏｔａｋｅｆｕｌａｄｖａｎｔａｇｅｓｏｆｔｈｅｂａｎｄｗｉｄｔｈｏｆｔｈｅｆｉｂｅｒ,ｏｐｔｉｃａｌｔｉｍｅｄｉｖｉｓｉｏｎｍｕｌｔｉｐｌｅｘｉｎｇ（ＯＴＤＭ）ｔｅｃｈｎｏｌｏｇｙｈａｓｂｅｎｗ...