基于MOF@TiN-Ag/银溶胶复合基底的茶碱表面增强拉曼检测

以制备的MOF@TiN-Ag/银溶胶复合基底为表面增强拉曼光谱(SERS)活性基底，对茶碱进行SERS检测，探讨了基于该复合基底的表面增强拉曼技术在药物检测方面的应用。首先，利用电化学阳极氧化结合氨气还原氮化法制备了氮化钛纳米管阵列，随后通过电化学沉积法制备TiN-Ag复合基底，并在其表面原位生长金属有机框架(MOF)包覆层得到MOF@TiN-Ag复合基底，将茶碱与银溶胶混合后滴加在该复合基底上进行表面增强拉曼光谱检测。结果表明，MOF@TiN-Ag/银溶胶复合基底中存在面心立方晶型TiN、金属单质Ag和MOF钴基3种物相；扫描电镜结果显示，TiN纳米管排列整齐，Ag纳米结构呈树枝状均匀分散在其表面；作为隔绝层的MOF粒子形状规整，覆盖在TiN-Ag表面；银溶胶纳米粒子呈圆球状分布在MOF@TiN-Ag复合基底表面。由于银纳米粒子与TiN-Ag复合基底可发生协同增强作用，加之MOF的富集特性，使得该复合基底具有优异的SERS性能，其对茶碱溶液的SERS检出限为1×10^-5 mol/L，检测性能良好。所制备的MOF@TiNAg/银溶胶复合基底拓宽了SERS在药物检测...     

Cu2O/Ag纳米复合物的表面增强拉曼光谱

用一种简单的化学还原方法制备了银纳米粒子包覆的氧化亚铜（Cu2O）纳米复合物。扫描电子显微镜显示Cu2O 为八面体型的纳米粒子,表面光滑,结构对称。包覆的Ag部分占据Cu2O粒子表面。通过比较Ag/Cu2O纳米复合物、Ag溶胶及Cu纳米粒子表面吸附的4-巯基吡啶（4-Mpy）分子表面增强拉曼光谱（SERS）发现,利用此方法得到了Cu2O粒子表面吸附分子的拉曼光谱。银纳米粒子所产生的电磁场增强又增强了吸附在Cu2O上的4-Mpy拉曼信号。这种方法为初步研究Cu2O表面吸附分子性质提供了依据,扩宽了SERS的使用范围,使SERS应用在纳米半导体材料上成为可能。     

Au@Pt纳米粒子单层膜对甲醇氧化的电催化性能及SERS研究

通过种子生长法合成Au@Pt核壳结构纳米粒子,采用两相成膜法制备单层粒子膜,并转移获得Au@Pt核壳纳米粒子单层膜电极,该电极表面纳米粒子分布均匀,具有较大的比表面,对甲醇的氧化具有较好的电催化活性.研究表明,利用内核Au的长程电磁场增强效应,该单层膜表现出均匀且优良的表面增强拉曼散射(SERS)活性,适合作为基底在分子水平上研究表面的吸附和反应.获得了Au@Pt核壳纳米粒子单层膜表面甲醇电催化氧化过程的SERS光谱,为深入分析表面反应机理提供了实验依据.     

Ag_核Au_壳金属复合纳米粒子的制备及表面增强拉曼光谱研究

在已制备好的Ag纳米粒子表面,通过化学还原的方法沉积生长Au包裹层,制备了粒子尺寸为50-70nm的Ag核Au壳复合纳米粒子.通过改变AuCl₄^-量,使Ag_100-xAu_x中Au的含量由x=0变为x=30.用UV-Vis吸收光谱和透射电子显微镜(TEM)对该结构纳米粒子进行了表征,并以对巯基苯胺(PATP)为探针分子进行表面增强拉曼光谱(SERS)研究.表面拉曼光谱表明,该结构的纳米粒子具有比Ag更强的SERS活性,随着Au:Ag比例的逐渐增加,其活性呈现先增大后减小的趋势,其最大增强约为Ag纳米粒子的10倍.     

双功能金属纳米粒子在表/界面催化反应SERS研究中的应用

研究反应物在金属催化剂表/界面的变化是探索非均相催化反应机理、合理设计高性能催化剂的基础.表面增强拉曼光谱(SERS)具有表面选择性强、特异性高、灵敏度高等特点,可以实时、无标记地检测金属表面的化学反应过程.本文总结了同时具有SERS活性和催化活性的双功能金属纳米粒子的制备方法,如化学吸附和静电吸附组装方法以及化学还原和化学置换等方法,并介绍了双功能金属纳米粒子在SERS原位研究对硝基苯硫酚(4-NTP)还原、光催化对氨基苯硫酚(4-ATP)氧化、CO氧化和二氯乙烯加氢脱氯等表/界面催化反应中的应用,最后总结了研究中存在的问题并对其进行了展望.     

纳米TiO2的光致发光性能与SERS效应的关系

以采用溶胶-水热法制备的纯TiO₂及Zn掺杂的TiO₂纳米粒子作为SERS活性基底, 研究了其光致发光机制及其与表面增强拉曼散射(SERS)性能的关系. 结果表明, TiO₂纳米粒子的表面缺陷和氧空位等表面性质在其光致发光和增强拉曼散射性能中发挥着重要的作用. 在表面缺陷和氧空位含量较低时, TiO₂纳米粒子的光致发光光谱(PL)信号越强, 其SERS性能就越高; 当TiO₂纳米粒子的表面缺陷和氧空位含量达到一定程度时, TiO₂纳米粒子的PL信号越弱, 其SERS性能越高.     

基于Kretschmann结构的金银合金薄膜的SERS效应

利用Kretschmann棱镜耦合结构和532 nm激光光源,测试了金银合金薄膜的表面增强拉曼散射(SERS)效应,并与纯金薄膜的测试结果进行了比较.结果显示,在激发光为p偏振态且入射角近似等于表面等离子体共振(SPR)角时,附着于金银合金薄膜表面的Nile Blue分子的SERS信号达到最强,比利用纯金薄膜测得的SERS信号高约2倍.实验结果还表明,在金银合金薄膜表面自组装金纳米粒子后,Nile Blue吸附层的SERS信号比自组装纳米金之前测得的信号增强了至少3倍,比利用纳米金修饰的纯金薄膜测得的信号高出2倍多.在棱镜底面沿薄膜法线收集的SERS信号是完全非偏振光,而从棱镜侧面收集的SERS信号是p偏振光,是拉曼光借助SPR效应产生的定向发射.     

石墨烯/铂复合材料的制备及电化学性能研究

采用Hummers法制备氧化石墨,再超声分散于去离子水中形成稳定的氧化石墨分散液。分散液与氯铂酸溶液混合后,氧化石墨烯还原氯铂酸产生大量铂纳米粒子,铂粒子被牢固地锚在氧化石墨烯片上,最后将所得到的氧化石墨烯/铂复合物置于管式炉中在Ar/H2气氛中于800℃下热裂解制备出石墨烯/铂复合材料。形貌与纳米结构分析表明,氧化石墨已被彻底还原成石墨烯,铂纳米粒子均匀分散在褶皱的石墨烯纳米片间。电化学阻抗研究进一步揭示复合材料的电子转移阻抗明显小于石墨烯,呈示铂纳米粒子掺入石墨烯片层大大改善了导电性。石墨烯/铂复合材料应用于对苯二酚的电化学检测,检出限达1.6×10-7mol.L-1,这说明该材料具有优异的电催化性能。     

基于自组装纳米金单层膜的全内反射SERS研究

采用静电自组装技术分别在玻璃基片和30 nm厚的金膜表面固定一层金纳米粒子(GNP)制得两种表面增强拉曼散射(SERS)基底,然后通过棱镜全内反射(TIR)激励和背向收集模式分别测试了两种基底上吸附的染料单分子层SERS光谱.实验结果表明两种SERS基底的拉曼增强效果均高度依赖于入射激光的偏振状态,对于玻璃/纳米金SERS基底,s光全内反射导致的拉曼增强因子是线偏振光(p)光的2-5倍,说明该基底上的"热点"位于纳米金单层膜内相邻粒子之间;对于玻璃/金膜/纳米金SERS基底,只有采用p光在特定的全内反射角下才能激发SERS信号,而且测得的SERS信号比玻璃/纳米金基底增强了近30倍.究其原因是p光在金膜表面共振激发的传播表面等离子体与纳米金局域表面等离子体耦合,进而导致显著场增强.实验结果指出在背向收集模式下,由p光激发的SERS信号是非偏振光,包含强度几乎相等的s和p成分.利用玻璃/金膜/纳米金基底还实现了拉曼光定向发射和收集,测得的SERS信号是p光.     

三明治结构纳米银/氧化石墨烯基底的制备及SERS性能

采用易操作且低成本的静电自组装方法, 在质子化的玻璃基片上, 通过交替沉积氧化石墨烯(GO) 和带正电荷的银纳米粒子(AgNPs) 获得少数层GO和AgNPs复合薄膜(AgNPs/GO). 采用紫外-可见光吸收光谱、 原子力显微镜和扫描电子显微镜对复合薄膜的生长和表面形貌进行了表征. 结果表明, 通过调控AgNPs 溶胶浓度和自组装循环次数, 可以获得AgNPs/GO/AgNPs 的三明治结构, 并在基底表面形成均匀的AgNPs 聚集体. 表面增强拉曼散射(SERS)研究结果表明, AgNPs/GO-4基底具有最佳的SERS性能, 其对罗丹明6G(R6G) 和结晶紫的平均拉曼增强因子分别为3.4×10⁸和1.3×10⁹, 对R6G的最低检测浓度约为10^-12 mol/L. 多层三明治结构和较小颗粒间距使得AgNPs层之间产生强烈的耦合作用, 并在GO片层间产生大量的“热点”, 显著提高SERS性能, 而少数层GO具有强吸附性, 有利于分子在基底中富集, 从而起到化学增强作用, 提高SERS灵敏度.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.