Transport properties of 1,1-difluoroethane (R152a)

Based on reliable. carefully selected data sets. equations for the thermal conductivity and the viscosity of the refrigerant R 112a are presented. They are valid at temperatures from 240 to 440 K, pressures up to 20 MPa. and densities up to 1050 kg · m^–3. including the critical region.     

A fundamental equation of state for 1,1-difluoroethane (HFC-152a)

A fundamental equation ofstale for HFC-152a ( 1,1-dilluorocthane) is presented covering temperatures between the triple-point temperature ( 154.56 K) and 435 K for pressures up to 311 M Pa. The equation is based on reliable (p, g, T) data in the range mentioned above. These are generally represented within ±0.1 % of density. Furthermore. experimental values of the vapor pressure, the saturated liquid density, and some isobaric heat capacities in the liquid were included during the correlation process. The new equation of state is compared with experimental data and also with the equation of state developed by Tamatsu et al. Differences between the two equations of state generally result from using different experimental input data. It is shown that the new equation of state allows an accurate calculation of various thermodynamic properties for most technical applications.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder. Colorado. U.S.A.     

Sound-velocity measurements for HFC-134a and HFC-152a with a spherical resonator

A spherical acoustic resonator was developed for measuring sound velocities in the gaseous phase and ideal-gas specific heats for new refrigerants. The radius of the spherical resonator, being about 5 cm, was determined by measuring sound velocities in gaseous argon at temperatures from 273 to 348 K and pressures up to 240 kPa. The measurements of 23 sound velocities in gaseous HFC-134a (1,1,1,2-tetrafluoroethane) at temperatures of 273 and 298 K and pressures from 10 to 250 kPa agree well with the measurements of Goodwin and Moldover. In addition, 92 sound velocities in gaseous HFC-152a (1,1-difluoroethane) with an accuracy of ±0.01% were measured at temperatures from 273 to 348 K and pressures up to 250 kPa. The ideal-gas specific heats as well as the second acoustic virial coefficients have been obtained for both these important alternative refrigerants. The second virial coefficients for HFC-152a derived from the present sound velocity measurements agree extremely well with the reported second virial coefficient values obtained with a Burnett apparatus.Paper dedicated to Professor Joseph Kestin.     

The viscosity of the refrigerant 1,1-difluoroethane along the saturation line

The viscosity coefficient of the refrigerant R152a (1,1-difluoroethane) has been measured along the saturation line both in the saturated liquid and in the saturated vapor. The data have been obtained every 10 K from 243 up to 393 K by means of a vibrating-wire viscometer using the free damped oscillation method. The density along the saturation line was calculated from the equation of state given by Tamatsu et al. with application of the saturated vapor-pressure correlation given by Higashi et al. An interesting result is that in the neighborhood of the critical point, the kinematic viscosity of the saturated liquid seems to coincide with that of the saturated vapor. The results for the saturated liquid are in satisfying agreement with those of Kumagai and Takahashi and of Phillips and Murphy. A comparison of the saturatedvaport data with the unsaturated-vapor data of Takahashi et al. shows some discrepancies.Paper dedicated to Professor Joseph Kestin.     

A new vapor-pressure equation

A new vapor-pressure equation which has only three adjustable parameters and has a simple form is established consistent with the renormalization-group theory of critical phenomena. The equation presented here is valid over the entire range from the triple point to the critical temperature for a chemically diverse set of compounds and does an excellent job representing data. The new equation also has a great advantage over all of the previous vapor-pressure equations in that it can be used to extrapolate extraordinarily from the usual range in which data are available both to the critical point and to the triple point. Furthermore, it reflects physical properties of the substance based upon the known physical behavior. Satisfactory results are presented for 44 simple, quantum, hydrobonding, nonpolar and polar substances, refrigerants, associating compounds, and others.     

Measurement of Speed of Sound with a Spherical Resonator: HCFC-22, HFC-152a, HFC-143a, and Propane

A spherical resonator and acoustic signal measurement apparatus have been designed and developed for measuring the speed of sound in the gaseous phase. The inner radius of the spherical resonator, being about 6.177 cm, was determined by measuring the speed of sound in gaseous argon at temperatures between 293 and 323 K and at pressures up to 200 kPa. Measurements of the speed of sound in four halogenated hydrocarbons are presented, the compounds are chlorodifluoromethane (CHClF₂ or HCFC-22), 1,1-difluoroethane (CH₃CHF₂ or HFC-152a), 1,1,1-trifluoroethane (CH₃CF₃ or HFC-143a), and propane (CH₃CH₂CH₃ or HC-290). Ideal-gas heat capacities and acoustic virial coefficients were directly deduced from the present data. The results were compared with those from other studies. In this work, the experimental uncertainties in temperature, pressure, and speed of sound are estimated to be less than ±14 mK, ±2.0 kPa, and ±0.0037%, respectively. In addition, equations for the ideal-gas isobaric specific heat capacity for HFC-152a, HFC-143a, and propane are proposed, which are applicable in temperature ranges 240 to 400 K for HFC-152a, 250 to 400 K for HFC-143a, 225 to 375 K for propane. The purities for each of the samples of HCFC-22, HFC-152a, HFC-143a, and propane are better than 99.95 mass%.     

Compression factor and vapor pressure of bromotrifluoromethane in the temperature range 245–393 K at pressures up to 12 MPa

The compression factors and vapor pressures have been measured on bromotrifluoromethane using a Burnett apparatus. The results on the compression factor cover the range of temperatures 263 to 393 K and of pressures 0.14 to 11.6 MPa, corresponding to a density variation from 7 to 1367 kg· m^–3. The experimental uncertainty of these 176 measurements of compression factor was estimated to be 0.2%. Thirty measurements of vapor pressure were made for temperatures 245 to 339 K, with an experimental uncertainty of 0.1%. Based on these results, the second virial coefficients were determined for temperatures 293 to 393 K.     

Experimental study ofPVT properties of HFC-125 (CHF2CF3)

Pressure-volume-temperature (PVT) properties and vapor pressures of HFC125 (pentafuoroethane; CHF₂CF₃) have been experimentally obtained. Vapor pressures of HFC-125 have been measured in the range of temperatures from 223 to 338 K and pressures up to 3.54 M Pa with uncertainties of 5 mK and 2.5 kPa, respectively. The vapor pressure equation for this substance was correlated based on the present data. PVT properties of HFC-125 have been determined with a constant-volume apparatus in the range of temperatures from 280 to 473 K, pressures up to 17 M Pa, and densities up to 1145 kg · m^–3 with uncertainties of 5 mK, 2.5 kPa, and 0.01%, respectively. All of the available experimentalPVT property data were compared with the equation of state correlated by Wilson et al.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

New Equation for Vapor Pressures of Difluoromethane (HFC-32)

Critically evaluated experimental vapor-pressure data sets supplemented with calculated data for low-temperature region were used in the development of vapor-pressure equations. The optimum number of terms, coefficients, and exponents of the Wagner-type equation were derived by means of the Setzmann–Wagner program OPTIM based on the combination of the stepwise regression analysis and evolutionary optimization method. Equations were checked by the reduced enthalpy of vaporization criterion derived from the Clausius–Clapeyron equation and specific volume of ideal gas. An equation developed using 261 experimental data points and low-temperature data calculated by Lüddecke and Magee gives an RMS deviation of 0.102%; a second equation based on the same experimental data and low-temperature data calculated by Tillner-Roth gives an RMS deviation of 0.101% from experimental points. The triple-point pressure extrapolated to the measured temperature T _tp = 136.34 K is discussed. Comparisons with vapor pressure equations by Outcalt and McLinden, Duarte-Garza and Magee. and Kubota et al. are also given.     

Phase Equilibria of CFC Alternative Refrigerant Mixtures: 1,1,1,2,3,3,3-Heptafluoropropane (HFC-227ea)+Difluoromethane (HFC-32), +1,1,1,2-Tetrafluoroethane (HFC-134a), and +1,1-Difluoroethane (HFC-152a)

Isothermal vapor–liquid equilibria were measured for the binary systems difluoromethane (HFC-32)+1,1,1,2,3,3,3-heptafluoropropane (HFC-22ea) and 1,1-difluoroethane (HFC-152a)+1,1,1,2,3,3,3-heptafluoropropane at 283.15 and 303.15 K and 1,1,1,2-tetrafluoroethane (HFC-134a)+1,1,1,2,3,3,3-heptafluoropropane at 303.15 and 323.15 K in an apparatus in which both phases were recirculated. The experimental data were correlated with the Peng–Robinson equation of state using the Wong–Sandler mixing rules. Azeotropic behavior has not been found in any of the three mixtures.     

Molar Heat Capacity at Constant Volume of 1,1-Difluoroethane (R152a) and 1,1,1-Trifluoroethane (R143a) from the Triple-Point Temperature to 345 K at Pressures to 35 MPa

Molar heat capacities at constant volume (C _v) of 1,1-difluoroethane (R152a) and 1,1,1-trifluoroethane (R143a) have been measured with an adiabatic calorimeter. Temperatures ranged from their triple points to 345 K, and pressures up to 35 MPa. Measurements were conducted on the liquid in equilibrium with its vapor and on compressed liquid samples. The samples were of high purity, verified by chemical analysis of each fluid. For the samples, calorimetric results were obtained for two-phase ((C _v ⁽²⁾ ), saturated-liquid (C or C _x ^' ), and single-phase (C _v) molar heat capacities. The C data were used to estimate vapor pressures for values less than 105 kPa by applying a thermodynamic relationship between the saturated liquid heat capacity and the temperature derivatives of the vapor pressure. The triple-point temperature and the enthalpy of fusion were also measured for each substance. The principal sources of uncertainty are the temperature rise measurement and the change-of-volume work adjustment. The expanded relative uncertainty (with a coverage factor k=2 and thus a two-standard deviation estimate) for C _v is estimated to be 0.7%, for C _v ⁽²⁾ it is 0.5%, and for C it is 0.7%.     

Measurements of PVTx Properties for Binary Mixtures of HFC-32 (CH2F2) and HFC-134a (CH2FCF3)

An experimental study of pressure–volume–temperature–composition (PVTx) properties for binary mixtures of HFC-32 and HFC-134a was conducted in the range of temperatures from 243 to 473 K, pressures up to 16.7 MPa, densities from 9.5 to 1065 kg·m^–3, and compositions from 0.39 to 0.89 mol fraction of HFC-32, with uncertainties of 8 mK, 1.7 kPa, 0.04%, and 0.001 mol fraction, respectively. A constant-volume method was used for the present measurements either with a spherical vessel approximately 270 cm³ in its inner volume or with a cylindrical vessel approximately 138cm³ in its inner volume. The present data were compared with the Piao equation of state for this substance.     

Gas-phasePVT properties of 1,1,1,2,3,3-Hexafluoropropane

We have measured the gas-phasePVT properties of 1,1,1,2,3,3,-hexafluoro-propane (R-236ea), which is considered to be a promising candidate for the replacement of 1,2-dichlorotetrafluoroethane (R-114). The measurements have been performed with a Burnett apparatus over a temperature range of 340 390 K and at pressures of 0.10–2.11 MPa. The experimental uncertainties of the measurements were estimated to be within ±0.5 kPa in pressure. ±8 mK in temperature, and ±0.15% in density. A truncated virial equation of state was developed to represent thePVT data and the second virial coefficients were also derived. The saturated vapor densities were also calculated by extrapolating the gas-phase isotherms to the vapor pressures. The critical density estimated from the rectilinear diameter was compared with the experimental value. The purity of the R-236ea sample used in the present measurements was 99.9 mol%. Paper presented at the Fourth Asian Thermophysical Properties Conference, September 5–8, 1995, Tokyo, Japan.     

Measurements ofPVTx properties of refrigerant mixture HFC-32+HFC-125 in the gaseous phase

The experimental 156PVTx properties of an important binary refrigerant mixture, HFC-32 (difluoromethane)+HFC-125 (pentafluorethane), have been measured for three compositions, i.e., 50, 60, and 80 wt% HFC-32, by a constant-mass-method coupled with expansion procedure in an extensive range of temperaturesT from 320 to 440 K, of pressuresP from 1.8 to 5.3 M Pa, and of densities p from 50 to 124 kg · m^–3. The experimental uncertainties of the present measurements are estimated to be within ±7 mK in temperature, ±2 kPa in pressure, ±0.2% in density and ±0.02 wt% of HFC-32. The sample purities are 99.998 wt% for HFC-32 and 99.99 wt% for HFC-125. Seventy-eight second and third virial coeflicients for temperatures from 320 to 440 K have been determined by the present measurements.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Precise Measurements of the Vapor-Liquid Equilibria (VLE) of HFC-32/134a Mixtures Using a New Apparatus

A new apparatus for precise measurements of the vapor-liquid equilibria of mixtures by the circulation method has been developed. This apparatus has two special components: a high-stability temperature control system and a helium pressurization system. The temperature in the liquid bath surrounding the sample cell is kept constant within ±0.5mK. The helium pressurization system increases the pressure of the sampled mixture when measuring the compositions at low temperatures by gas chromatography. With these components, the uncertainty in measuring the vapor-liquid equilibria has been reduced. Using this apparatus, the vapor-liquid equilibria of HFC-32/134a mixtures were measured in a temperature range of 263.15 to 293.15K. These results are in good agreement with the calculated results from REFPROP (Ver. 6.01) with a relative pressure difference of about 2%.     

模板法制备高比表面积的氟化镁及其在HFC-152a脱HF反应中的应用

镁基固体酸催化剂在含氟化学品的合成中具有优异的性能。利用模板法制备了高表面积的氟化镁,并考察了SiO₂模板剂的用量对其结构及催化性能的影响。通过N₂物理吸附、X射线衍射、NH₃-程序升温脱附、透射电镜和X射线光电子能谱等表征手段进行了表征, 以1,1-二氟乙烷(HFC-152a, CH₃CHF₂)脱HF制备氯乙烯(VF,CH₂=CHF)为探针对其催化性能进行了研究。结果表明, SiO₂模板剂用量对氟化镁的比表面积、晶粒度和酸性有较大影响。当SiO₂模板剂用量为14mol%时, 氟化镁比表面积可达304 m²/g, 是不添加SiO₂模板剂的2.5倍, 而且Mg晶粒度更小, 配位数更多。随着Mg配位数增多, MgF₂的酸性位急剧增多, 在以Lewis酸为活性位的1,1-二氟乙烷脱HF反应中, MgF₂的催化活性迅速升高。因此, 以SiO₂为模板是制备高活性MgF₂催化剂的有效方法。     

An equation of state for 1,1-difluroethane (HFC 152a)

An equation of state for 1,1-difluoroethane (HFC 152a, CH₃CHF₂) has been developed on the basis of reliable experimental data including PVT, liquid C_p, and saturated-liquid-density data measured by our group. It is a non-dimensionalized virial equation whose functional form is the same as that originally developed for 1,1,1,2-tetrafluoroethane (HFC 134a) in our group. The effective range is for pressures up to 15 MPa, temperatures from 230 to 450 K, and densities to 1000 kg m⁻³. The equation represents reliable PVT measurements within ± 1% in pressure for the superheated vapour and supercritical fluid, while within ±0.5% in density for the compressed liquid. In addition, it should be noted that the equation represents the other essential thermodynamic properties including vapour pressures, saturated-liquid/ vapour densities, isobaric/isochoric specific heats and sound velocity in both the liquid and gaseous phase of HFC 152a.     

The critical constants of long-chain normal paraffins

Because of the recent availability of the critical constants of normal alkanes up to octadecane, some modifications in the estimation procedures for the critical constants have become necessary. It has been shown that the equation of Ambrose for the critical temperature of normal alkanes leads to the result that as n , the limiting value for the critical temperature is equal to the limiting value for the normal boiling point and the limiting value for the critical pressure is 1 atm. Currently, the CH₂ increment for the critical volume is considered constant. The recent data of Teja have shown that the CH₂ increment increases indefinitely in a homologous series until the critical volume reaches its limiting value. This has made the current procedure for estimating the critical volume obsolete. Taking into account the new measurements of Teja, we have now developed new equations for estimating the critical constants. The limiting values for an infinitely long alkyl chain for T _b, T _c, P _c, and V _c have been found to be 1021 K, 1021 K, 1.01325 bar, and 18618 cm³ · mol^–1, respectively. These new concepts have been applied to the estimation of various properties other than the critical constants.Nomenclature M Molar mass, kg·mol ^–1 - V _c Critical volume, cm³·mol^–1 - V ₁ Saturated liquid volume, cm³·mol^–1 - P _c Critical Pressure, bar - T _c Critical temperature, K - T _b Normal boiling point, K - T _B Boyle temperature, K - T _A Temperature at which the third virial coefficient is zero, K - V _c Limiting value of critical volume = 18,618 cm³ · mol^–1 - P _c Limiting value of critical pressure=1.01325 bar - T _c Limiting value of critical temperature = 1021 K - T _b Limiting value of normal boiling point = 1021 K - P _b Pressure at the normal boiling point, 1 atm - Z _c Critical compressibility factor - Z _c Limiting value for the critical compressibility factor = 0.22222 - R Gas constant, 83.1448×10^–6m³ · bar · K^–1 · mol^–1 - Acentric factor - X (T _c–T _b)/T _c - X ₁ (T _c–T)/T _c - X ₂ 1–(T _B/T)^5/4 - X ₃ 1–(T _A/T)^5/2 - Y P _c/RT _c - Surface tension, mN · m^–1 - B Second virial coefficient, cm³ · mol^–1 - B Limiting value for the second virial coefficient = –30,463 cm³ · mol^–1 - C Third virial coefficient, cm⁶ · mol^–2 - C _b Third virial coefficient at the normal boiling point, cm⁶ · mol^–2 - C _c Third virial coefficient at the critical temperature, cm⁶ · mol^–2 - C _B Third virial coefficient at the Boyle temperature, cm⁶ · mol^–2 - H _vb Enthalpy of vaporization at the normal boiling point, kJ · mol^–1 - n Number of carbon atoms in a homologous series - p Platt number, number of C-C-C-C structural elements - a, b, c, d, e, etc Constants associated with the specific equation - T _c ^* , T _b ^* , P _c ^* , V _c ^* , etc. Dimensionless variables     

An extended corresponding-states model for predicting thermodynamic properties of N2-Ar-O2 mixtures including vapor-liquid equilibrium

A formulation developed previously for the prediction of the thermodynamic properties of single-phase states of binary and ternary mixtures in the nitrogen-argon-oxygen system has been revised to include the calculation of vapor-liquid equilibrium (VLE) properties. The model is based on the theory of extended corresponding states with van der Waals mixing rules. Binary interaction parameters have been determined with single-phaseP-p-T and vaporliquid equilibrium data to improve the accuracy of thermodynamic property predictions. The model accurately represents single-phase and vapor-liquid equilibrium properties over a wide range of compositions for binary and ternary mixtures. Comparisons of calculated properties to selected mixture data for both single-phase and VLE states are included.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Measurements of Gaseous PVTx Properties and Saturated Vapor Densities of Refrigerant Mixture R-125+R-143a

The experimental PVTx properties of a binary refrigerant mixture, R-125 (pentafluoroethane)+R-143a (1,1,1-trifluoroethane), have been measured for a composition of 50 mass% R-125 by a constant-mass method coupled with an expansion procedure in a range of temperatures from 305 to 400 K, pressures from 1.5 to 6.1 MPa, and densities from 92 to 300 kg·m^–3. The experimental uncertainties of the present measurements are estimated to be within ±7.2 mK in temperature, ±3.0 kPa in pressure, ±0.12 kg·m^–3 in density, and ±0.040 mass% in composition. The sample purities are 99.953 mass% for R-125 and 99.998% for R-143a. Seven saturated vapor densities and dew point pressures of the R-125+R-143a system were determined, on the basis of rather detailed PVTx properties measured in the vicinity of the saturation boundary as well as the thermodynamic behavior of isochores near saturation. The second and third virial coefficients for temperatures from 330 to 400 K were also determined.