A Tandem Enzymatic sp2‐C‐Methylation Process: Coupling in Situ S‐Adenosyl‐l‐Methionine Formation with Methyl Transfer

A one‐pot, two‐step biocatalytic platform for the regiospecfic C‐methylation and C‐ethylation of aromatic substrates is described. The tandem process utilises SalL (Salinospora tropica) for in situ synthesis of S‐adenosyl‐l ‐methionine (SAM), followed by alkylation of aromatic substrates by the C‐methyltransferase NovO (Streptomyces spheroides). The application of this methodology is demonstrated for the regiospecific labelling of aromatic substrates by the transfer of methyl, ethyl and isotopically labelled ¹³CH_3, ¹³CD₃ and CD₃ groups from their corresponding SAM analogues formed in situ.     

4‐Hydroxy‐3‐methyl‐6‐(1‐methyl‐2‐oxoalkyl)pyran‐2‐one Synthesis by a Type III Polyketide Synthase from Rhodospirillum centenum

The purple photosynthetic bacterium Rhodospirillum centenum has a putative type III polyketide synthase gene (rpsA). Although rpsA was known to be transcribed during the formation of dormant cells, the reaction catalyzed by RpsA was unknown. Thus we examined the RpsA reaction in vitro, using various fatty acyl‐CoAs with even numbers of carbons as starter substrates. RpsA produced tetraketide pyranones as major compounds from one C_10–14 fatty acyl‐CoA unit, one malonyl‐CoA unit and two methylmalonyl‐CoA units. We identified these products as 4‐hydroxy‐3‐methyl‐6‐(1‐methyl‐2‐oxoalkyl)pyran‐2‐ones by NMR analysis. RpsA is the first bacterial type III PKS that prefers to incorporate two molecules of methylmalonyl‐CoA as the extender substrate. In addition, in vitro reactions with ¹³C‐labeled malonyl‐CoA revealed that RpsA produced tetraketide 6‐alkyl‐4‐hydroxy‐1,5‐dimethyl‐2‐oxocyclohexa‐3,5‐diene‐1‐carboxylic acids from C_14–20 fatty acyl‐CoAs. This class of compounds is likely synthesized through aldol condensation induced by methine proton abstraction. No type III polyketide synthase that catalyzes this reaction has been reported so far. These two unusual features of RpsA extend the catalytic functions of the type III polyketide synthase family.     

Nucleophilic Water Capture or Proton Loss: Single Amino Acid Switch Converts δ‐Cadinene Synthase into Germacradien‐4‐ol Synthase

δ‐Cadinene synthase is a sesquiterpene cyclase that utilises the universal achiral precursor farnesyl diphosphate (FDP) to generate predominantly the bicyclic sesquiterpene δ‐cadinene and about 2 % germacradien‐4‐ol, which is also generated from FDP by the cyclase germacradien‐4‐ol synthase. Herein, the mechanism by which sesquiterpene synthases discriminate between deprotonation and reaction with a nucleophilic water molecule was investigated by site‐directed mutagenesis of δ‐cadinene synthase. If W279 in δ‐cadinene synthase was replaced with various smaller amino acids, the ratio of alcohol versus hydrocarbon product was directly proportional to the van der Waals volume of the amino acid side chain. DCS‐W279A is a catalytically highly efficient germacradien‐4‐ol synthase (k_cat/K_M=1.4×10^?3 μm s^?1) that produces predominantly germacradien‐4‐ol in addition to 11 % δ‐cadinene. Water capture is not achieved through strategic positioning of a water molecule in the active site, but through a coordinated series of loop movements that allow bulk water access to the final carbocation in the active site prior to product release.     

Synthesis of poly[(2‐oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether‐co‐N‐phenylmaleimide] and its miscibility in blends with styrene‐acrylonitrile or poly(vinyl chloride)

The aim of the study was to investigate the synthesis of a copolymer bearing cyclic carbonate and its miscibility with styrene/acrylonitrile copolymer (SAN) or poly(vinyl chloride) (PVC). (2‐Oxo‐1,3‐dioxolan‐4‐yl)methyl vinyl ether (OVE) as a monomer was synthesized from glycidyl vinyl ether and CO₂ using quaternary ammonium chloride salts as catalysts. The highest reaction rate was observed when tetraoctylammonium chloride (TOAC) was used as a catalyst. Even at the atmospheric pressure of CO₂, the yield of OVE using TOAC was above 80% after 6 h of reaction at 80°C. The copolymer of OVE and N‐phenylmaleimide (NPM) was prepared by radical copolymerization and was characterized by FTIR and ¹H‐NMR spectroscopies and differential scanning calorimetry (DSC). The monomer reactivity ratios were given as r₁ (OVE) = 0.53–0.57 and r₂ (NPM) = 2.23–2.24 in the copolymerization of OVE and NPM. The films of poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were cast from N‐dimethylformamide. An optical clarity test and DSC analysis showed that poly(OVE‐co‐NPM)/SAN and poly(OVE‐co‐NPM)/PVC blends were both miscible over the whole composition range. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1809–1815, 2000     

Tailoring Electrochemical Property of Layered Perovskite Cathode by Cu‐doping for Proton‐Conducting IT‐SOFCs

Layered perovskite oxide YBaCuCoO_5+x (YBCC) was synthesized by an EDTA‐citrate complexation process and was investigated as a novel cathode for proton‐conducting intermediate temperature solid oxide fuel cells (IT‐SOFCs). The thermal expansion coefficient (TEC) of YBCC was 15.3 × 10⁻⁶ K⁻¹ and the electrical conductivity presented a semiconductor‐like behavior with the maximum value of 93.03 Scm⁻¹ at 800 °C. Based on the defect chemistry analysis, the electrical conductivity gradually decreases by the introduction of Cu into Co sites of YBaCo₂O_5+x and the conductor mechanism can transform from the metallic‐like behavior to the semiconductor‐like behavior. Thin proton‐conducting (BaZr_0.1Ce_0.7Y_0.1Yb_0.1O_3–δ) BZCYYb electrolyte and NiO–BZCYYb anode functional layer were prepared over porous anode substrates composed of NiO–BZCYYb by a one‐step dry‐pressing/co‐firing process. Laboratory‐sized quad‐layer cells of NiO‐BZCYYb / NiO‐BZCYYb / BZCYYb / YBCC with a 20 μm‐thick BZCYYb electrolyte membrane exhibited the maximum power density as high as 435 mW cm⁻² with an open‐circuit potential (OCV) of 0.99 V and a low interfacial polarization resistance of 0.151 Ωcm² at 700 °C. The experimental results have indicated that the layered perovskite oxide YBCC can be a cathode candidate for utilization as proton‐conducting IT‐SOFCs.     

Poly(4‐vinylphenol)/tetra‐n‐butylammonium iodide: Efficient organocatalytic system for synthesis of cyclic carbonates from CO2 and epoxides

An efficient polymer‐based catalytic system of poly(4‐vinylphenol) and tetra‐n‐butylammonium iodide was developed for the synthesis of cyclic carbonates from epoxides and CO₂. Owing to the synergistic effects of hydroxyl groups and iodide anions, this commercially available and metal‐free system was highly active for the reaction of various terminal epoxides under environmentally benign conditions, at 25 to 60 °C and atmospheric pressure of CO₂, without the use of any organic solvents. The catalyst system can be easily separated by adding ether, and its ability was recovered by treating it with 40% CH₃CO₂H aq. The recyclability was investigated in detail for three substrates, epichlorohydrin, 1,2‐epoxyhexane, and styrene oxide, using ¹H nuclear magnetic resonance analysis. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45189.     

Studies on the synthesis and properties of hydroxyl azacrown ether‐grafted chitosan

The chitosan hydroxyl azacrown ether was synthesized by reaction of hydroxyl azacrown ether with epoxy‐activated chitosan. The C₂ amino group in chitosan was protected from the reaction between benzaldehyde and chitosan to form N‐benzylidene chitosan. After reaction with epichlorohydrin and azacrown ether, reacting O‐aryl mesocyclic diamine‐N‐benzylidene chitosan and dilute ethanol hydrochloride solution to obtain novel chitosan‐azacrown ether bearing hydroxyl removed the Schiff base. Its structure was confirmed with elemental analysis, FTIR spectra analysis, X‐ray diffraction analysis, and solid‐state ¹³C NMR analysis. Its static adsorption properties for Ag(I), Cd(II), Pb(II), and Cr(III) were also investigated. The experimental results showed that the hydroxyl azacrown ether grafted chitosan has good adsorption capacity and high selectivity for Ag(I) in the coexistence of Pb(II) and Cd(II), the selectivity coefficients of hydroxyl azacrown ether chitosan were K_Ag(I)/Pb(II) = 32.34; K_Ag(I)/Cd(II) = 56.12. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1838–1843, 2001     

Five‐Membered Cyclitol Phosphate Formation by a myo‐Inositol Phosphate Synthase Orthologue in the Biosynthesis of the Carbocyclic Nucleoside Antibiotic Aristeromycin

Aristeromycin is a unique carbocyclic nucleoside antibiotic produced by Streptomyces citricolor. In order to elucidate its intriguing carbocyclic formation, we used a genome‐mining approach to identify the responsible enzyme. In silico screening with known cyclitol synthases involved in primary metabolism, such as myo‐inositol‐1‐phosphate synthase (MIPS) and dehydroqunate synthase (DHQS), identified a unique MIPS orthologue (Ari2) encoded in the genome of S. citricolor. Heterologous expression of the gene cluster containing ari2 with a cosmid vector in Streptomyces albus resulted in the production of aristeromycin, thus indicating that the cloned DNA region (37.5 kb) with 33 open reading frames contains its biosynthetic gene cluster. We verified that Ari2 catalyzes the formation of a novel five‐membered cyclitol phosphate from d ‐fructose 6‐phosphate (F6P) with NAD⁺ as a cofactor. This provides insight into cyclitol phosphate synthase as a member of the MIPS family of enzymes. A biosynthetic pathway to aristeromycin is proposed based on bioinformatics analysis of the gene cluster.     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

Exploration and mining of the bacterial terpenome

Tens of thousands of terpenoids are present in both terrestrial and marine plants, as well as fungi. In the last 5-10 years, however, it has become evident that terpenes are also produced by numerous bacteria, especially soil-dwelling Gram-positive organisms such as Streptomyces and other Actinomycetes. Although some microbial terpenes, such as geosmin, the degraded sesquiterpene responsible for the smell of moist soil, the characteristic odor of the earth itself, have been known for over 100 years, few terpenoids have been identified by classical structure- or activity-guided screening of bacterial culture extracts. In fact, the majority of cyclic terpenes from bacterial species have only recently been uncovered by the newly developed techniques of "genome mining". In this new paradigm for biochemical discovery, bacterial genome sequences are first analyzed with powerful bioinformatic tools, such as the BLASTP program or Profile Hidden Markov models, to screen for and identify conserved protein sequences harboring a characteristic set of universally conserved functional domains typical of all terpene synthases. Of particular importance is the presence of variants of two universally conserved domains, the aspartate-rich DDXX(D/E) motif and the NSE/DTE triad, (N/D)DXX(S/T)XX(K/R)(D/E). Both domains have been implicated in the binding of the essential divalent cation, typically Mg(2+), that is required for cyclization of the universal acyclic terpene precursors, such as farnesyl and geranyl diphosphate. The low level of overall sequence similarity among terpene synthases, however, has so far precluded any simple correlation of protein sequence with the structure of the cyclized terpene product. The actual biochemical function of a cryptic bacterial (or indeed any) terpene synthase must therefore be determined by direct experiment. Two common approaches are (i) incubation of the expressed recombinant protein with acyclic allylic diphosphate substrates and identification of the resultant terpene hydrocarbon or alcohol and (ii) in vivo expression in engineered bacterial hosts that can support the production of terpene metabolites. One of the most attractive features of the coordinated application of genome mining and biochemical characterization is that the discovery of natural products is directly coupled to the simultaneous discovery and exploitation of the responsible biosynthetic genes and enzymes. Bacterial genome mining has proved highly rewarding scientifically, already uncovering more than a dozen newly identified cyclic terpenes (many of them unique to bacteria), as well as several novel cyclization mechanisms. Moreover, bioinformatic analysis has identified more than 120 presumptive genes for bacterial terpene synthases that are now ripe for exploration. In this Account, we review a particularly rich vein we have mined in the genomes of two model Actinomycetes, Streptomyces coelicolor and Streptomyces avermitilis, from which the entire set of terpenoid biosynthetic genes and pathways have now been elucidated. In addition, studies of terpenoid biosynthetic gene clusters have revealed a wealth of previously unknown oxidative enzymes, including cytochromes P450, non-heme iron-dependent dioxygenases, and flavin monooxygenases. We have shown that these enzymes catalyze a variety of unusual biochemical reactions, including two-step ketonization of methylene groups, desaturation-epoxidation of secondary methyl groups, and pathway-specific Baeyer-Villiger oxidations of cyclic ketones.     

Recognition and Excision Properties of 8‐Halogenated‐7‐Deaza‐2′‐Deoxyguanosine as 8‐Oxo‐2′‐Deoxyguanosine Analogues and Fpg and hOGG1 Inhibitors

Cellular DNA continuously suffers various types of damage, and unrepaired damage increases disease progression risk. 8‐Oxo‐2′‐deoxyguanine (8‐oxo‐dG) is excised by repair enzymes, and their analogues are of interest as inhibitors and as bioprobes for study of these enzymes. We have developed 8‐halogenated‐7‐deaza‐2′‐deoxyguanosine derivatives that resemble 8‐oxo‐dG in that they adopt the syn conformation. In this study, we investigated their effects on Fpg (formamidopyrimidine DNA glycosylase) and hOGG1 (human 8‐oxoguanine DNA N‐glycosylase 1). Relative to 8‐oxo‐dG, Cl‐ and Br‐deaza‐dG were good substrates for Fpg, whereas they were less efficient substrates for hOGG1. Kinetics and binding experiments indicated that, although hOGG1 effectively binds Cl‐ and Br‐deaza‐dG analogues with low K_m values, their lower k_cat values result in low glycosylase activities. The benefits of the high binding affinities and low reactivities of 8‐oxo‐dG analogues with hOGG1 have been successfully applied to the competitive inhibition of the excision of 8‐oxoguanine from duplex DNA by hOGG1.     

Electrocopolymerization of a binary mixture of pyrrole and 2‐amino‐4‐phenylthiazole: Kinetic studies,copolymer structure,and applications as corrosion protection for mild steel in acid medium

Electrochemical copolymerization of a binary mixture of pyrrole and 2‐amino‐4‐phenylthiazole on platinum electrode in acid medium was carried out. The kinetic parameters were calculated using ex situ microgravimetric and electrochemical data. The experimentally obtained kinetic equations were R_P,W = k_W [acid]^1.16 [monomer]^1.85 from microgravimetric data and R_P,E = k_E [acid]^1.1 [monomer]^1.9 from the values of the anodic current density using cyclic voltammetry technique. The apparent activation energy was calculated by the two techniques and is found to be 32.55 and 29.6 kJ/mol from microgravimetric and electrochemical data respectively. The monomer reactivity ratios (r₁ and r₂) were calculated according to Fineman–Ross method and the copolymer structure was determined from the obtained data, which is found to be a block copolymer structure. The applications of the prepared copolymer as corrosion protection of mild steel in acid medium are studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 4047–4058, 2007     

Synthesis and properties of poly(arylene ether)s based on 3‐pentadecyl 4,4'‐biphenol

A new biphenol, 3‐pentadecyl 4,4′‐biphenol, was synthesized starting from 3‐pentadecylphenol and was polycondensed with 4,4′‐difluorobenzophenone, 1,3‐bis(4‐fluorobenzoyl)benzene and bis(4‐fluorophenyl)sulfone to obtain poly(arylene ether)s with biphenylene linkages in the backbone and pendent pentadecyl chains. Inherent viscosities and number‐average molecular weights (M_n) of the poly(arylene ether)s were in the range 0.50 ? 0.81 dL g^?1 and 2.2 × 10⁴ ? 8.3 × 10⁴, respectively. Detailed NMR spectroscopic studies of the poly(arylene ether)s indicated the presence of constitutional isomerism which existed because of the non‐symmetrical structure of 3‐pentadecyl 4,4′‐biphenol. The poly(arylene ether)s readily dissolved in common organic solvents such as dichloromethane, chloroform and tetrahydrofuran and could be cast into tough, transparent and flexible films from their chloroform solutions. The poly(arylene ether)s exhibited T_g values in the range 35–60 °C which are lower than that of reference poly(arylene ether)s without pentadecyl chains. The 10% decomposition temperatures (T₁₀) of the poly(arylene ether)s were in the range 410–455 °C indicating their good thermal stability. A gas permeation study of poly(ether sulfone) containing pendent pentadecyl chains revealed a moderate increase in permeability for helium, hydrogen and oxygen. However, there was a large increase in permeability for carbon dioxide which could be attributed to the internal plasticization effect of pendent pentadecyl chains. © 2016 Society of Chemical Industry     

Novel hydrogels based on a high‐molar‐mass water‐soluble dimethacrylate monomer

This report describes the preparation and swelling behaviour of novel hydrogels based on a water‐soluble dimethacrylate monomer (EBisEMA), which is characterized by a relatively high molar mass (M_n ～ 1700 g mol^?1) and contains a high proportion of aliphatic ether bonds in its structure. This feature results in moderately crosslinked and flexible polymer networks. Significant differences were observed in degree of swelling, depending on the synthesis method employed to obtain the hydrogels. The equilibrium water sorption of EBisEMA photopolymerized in bulk was 68 wt% while that of EBisEMA photopolymerized in aqueous solution (0.5 g mL^?1) was 104 wt%. Thiol–methacrylate hydrogels were prepared by visible light photopolymerization of EBisEMA with a tetrafunctional thiol (PETMP) at various EBisEMA‐to‐PETMP molar ratios. These hydrogels contained unreacted thiol groups because of a faster homopolymerization reaction of EBisEMA. Hydrogels were also prepared in bulk by propylamine‐catalysed Michael addition reaction. No significant differences in swelling were observed between EBisEMA homopolymer and photocured EBisEMA–PETMP copolymer. Conversely, a marked increase in water uptake (110 wt%) was observed in the EBisEMA–PETMP hydrogels prepared by the Michael addition reaction catalysed by propylamine. These trends are explained in terms of a balance between the mass fraction of hydrophilic groups and the crosslinking density of the network. EBisEMA–PETMP hydrogels formulated with thiol in excess showed a noticeable tendency to adhere to diverse substrates, including paper, metals, glass and skin. This feature makes them especially attractive in applications for which adhesion is particularly critical such as dermatological patches. © 2018 Society of Chemical Industry     

Biosynthesis of Sesterterpenes,Head‐to‐Tail Triterpenes,and Sesquarterpenes in Bacillus clausii: Identification of Multifunctional Enzymes and Analysis of Isoprenoid Metabolites

We performed functional analysis of recombinant enzymes and analysis of isoprenoid metabolites in Bacillus clausii to gain insights into the biosynthesis of rare terpenoid groups of sesterterpenes, head‐to‐tail triterpenes, and sesquarterpenes. We have identified an (all‐E)‐isoprenyl diphosphate synthase (E‐IDS) homologue as a trifunctional geranylfarnesyl diphosphate (GFPP)/hexaprenyl diphosphate (HexPP)/heptaprenyl diphosphate (HepPP) synthase. In addition, we have redefined the function of a tetraprenyl‐β‐curcumene synthase homologue as that of a trifunctional sesterterpene/triterpene/sesquarterpene synthase. This study has revealed that GFPP, HexPP, and HepPP, intermediates of two isoprenoid pathways (acyclic terpenes and menaquinones), are biosynthesized by one trifunctional E‐IDS. In addition, GFPP/HexPP and HepPP are the primary substrates for the biosynthesis of acyclic terpenes and menaquinone‐7, respectively.     

Electrocopolymerization kinetics of a binary mixture of 3‐chloroaniline 2‐amino‐4‐phenylthiazole and characterization of the obtained block copolymer films

Electrocopolymerization of a binary mixture of 3‐chloroaniline and 2‐amino‐4‐phenylthiazole on platinum electrode in acid medium was carried out under different reaction conditions such as temperature, current density, hydrochloric acid, and monomer concentrations with duration time. The initial rate of the electrocopolymerization reaction on platinum electrode is small and the rate law is R_p = K₂ [D]^1.29[HCl]^0.97[M]^1.94. The apparent activation energy is found to be 38.87 kJ/mol. The obtained copolymer film is characterized by ¹H‐NMR, elemental analysis, GPC IR, UV‐visible, and cyclic voltammetry and compared with those of the two homopolymers. The mechanism of the electrocopolymerization reaction is also discussed and the monomer reactivity ratio (r₁and r₂) is calculated. The thermogravimetric analysis (TGA) is used to confirm the proposed structure and determination of the number of water molecules in the polymeric chain unit. X‐ray and scanning electron microscopic analysis are used to investigate the surface morphology. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2076–2087, 2005     

Synthesis and characterization of a poly(ether–ester) copolymer from poly(2,6 dimethyl‐1,4‐phenylene oxide) and poly(ethylene terephthalate)

A series of poly(ether–ester) copolymers were synthesized from poly(2,6 dimethyl‐1,4‐phenylene oxide) (PPO) and poly(ethylene terephthalate) (PET). The synthesis was carried out by two‐step solution polymerization process. PET oligomers were synthesized via glycolysis and subsequently used in the copolymerization reaction. FTIR spectroscopy analysis shows the coexistence of spectral contributions of PPO and PET on the spectra of their ether–ester copolymers. The composition of the poly(ether–ester)s was calculated via ¹H NMR spectroscopy. A single glass transition temperature was detected for all synthesized poly(ether–ester)s. T_g behavior as a function of poly(ether–ester) composition is well represented by the Gordon‐Taylor equation. The molar masses of the copolymers synthesized were calculated by viscosimetry. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Splitting CO2 with a ceria‐based redox cycle in a solar‐driven thermogravimetric analyzer

Thermochemical splitting of CO₂ via a ceria‐based redox cycle was performed in a solar‐driven thermogravimetric analyzer. Overall reaction rates, including heat and mass transport, were determined under concentrated irradiation mimicking realistic operation of solar reactors. Reticulated porous ceramic (RPC) structures and fibers made of undoped and Zr⁴⁺‐doped CeO₂, were endothermally reduced under radiative fluxes of 1280 suns in the temperature range 1200–1950 K and subsequently re‐oxidized with CO₂ at 950–1400 K. Rapid and uniform heating was observed for 8 ppi ceria RPC with mm‐sized porosity due to its low optical thickness and volumetric radiative absorption, while ceria fibers with μm‐sized porosity performed poorly due to its opacity to incident irradiation. The 10 ppi RPC exhibited higher fuel yield because of its higher sample density. Zr⁴⁺‐doped ceria showed increasing reduction extents with dopant concentration but decreasing specific CO yield due to unfavorable oxidation thermodynamics and slower kinetics. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1263–1271, 2017     

Enhanced fracture toughness of epoxy resins with novel amine‐terminated poly(arylene ether sulfone)–carboxylic‐terminated butadiene‐acrylonitrile–poly(arylene ether sulfone) triblock copolymers

Amine‐terminated poly(arylene ether sulfone)–carboxylic‐terminated butadiene‐acrylonitrile–poly(arylene ether sulfone) (PES‐CTBN‐PES) triblock copolymers with controlled molecular weights of 15,000 (15K) or 20,000 (20K) g/mol were synthesized from amine‐terminated PES oligomer and commercial CTBN rubber (CTBN 1300x13). The copolymers were utilized to modify a diglycidyl ether of bisphenol A epoxy resin by varying the loading from 5 to 40 wt %. The epoxy resins were cured with 4,4′‐diaminodiphenylsulfone and subjected to tests for thermal properties, plane strain fracture toughness (K_IC), flexural properties, and solvent resistance measurements. The fracture surfaces were analyzed with SEM to elucidate the toughening mechanism. The properties of copolymer‐toughened epoxy resins were compared to those of samples modified by PES/CTBN blends, PES oligomer, or CTBN. The PES‐CTBN‐PES copolymer (20K) showed a K_IC of 2.33 MPa m^0.5 at 40 wt % loading while maintaining good flexural properties and chemical resistance. However, the epoxy resin modified with a CTBN/8K PES blend (2:1) exhibited lower K_IC (1.82 MPa m^0.5), lower flexural properties, and poorer thermal properties and solvent resistance compared to the 20K PES‐CTBN‐PES copolymer‐toughened samples. The high fracture toughness with the PES‐CTBN‐PES copolymer is believed to be due to the ductile fracture of the continuous PES‐rich phases, as well as the cavitation of the rubber‐rich phases. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1556–1565, 2002; DOI 10.1002/app.10390     

Synthesis and characterization of poly(ester‐ether‐imide)s derived from 5‐(4‐trimellitimidophenoxy)‐1‐trimellitimido naphthalene

A series of novel aromatic poly(ester‐ether‐imide)s with inherent viscosity values of 0.44–0.74 dL g^?1 were prepared by the diphenylchlorophosphate‐activated direct polycondensation of an imide ring‐containing diacid namely 5‐(4‐trimellitimidophenoxy)‐1‐trimellitimido naphthalene ( 1 ) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. Owing to comparison of the characterization data, an ester‐containing model compound ( 2 ) was also synthesized by the reaction of 1 with phenol. The model compound 2 and the resulted polymers were fully characterized by FT‐IR and NMR spectroscopy. The ultraviolet λ_max values of the poly(ester‐ether‐imide)s were also determined. The resulting polymers exhibited an excellent organosolubility in a variety of high polar solvents such as N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethyl sulfoxide, and N‐methyl‐2‐pyrrolidone. They were soluble even in common less polar organic solvents such as pyridine, m‐cresol, and tetrahydrofuran on heating. Crystallinity of the polymers was estimated by means of wide‐angle X‐ray diffraction. The resulted polymers exhibited nearly an amorphous nature. From differential scanning calorimetry thermograms, the polymers showed glass‐transition temperatures between 221 and 245°C. Thermal behaviors of the obtained polymers were characterized by thermogravimetric analysis, and the 10% weight loss temperatures of the poly(ester‐ether‐imide)s were found to be over 410°C in nitrogen. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010