Soil respiration mapped by exclusively use of MODIS data for forest landscapes of Saskatchewan,Canada

Soil respiration (R_s) is of great importance to the global carbon balance. Remote sensing of R_s is challenging because of (1) the lack of long-term R_s data for model development and (2) limited knowledge of using satellite-based products to estimate R_s. Using 8-years (2002–2009) of continuous R_s measurements with nonsteady-state automated chamber systems at a Canadian boreal black spruce stand (SK-OBS), we found that R_s was strongly correlated with the product of the normalized difference vegetation index (NDVI) and the nighttime land surface temperature (LSTn) derived from Moderate Resolution Imaging Spectroradiometer (MODIS) imagery. The coefficients of the linear regression equation of this correlation between R_s and NDVI × LSTn could be further calibrated using the MODIS leaf area index (LAI) product, resulting in an algorithm that is driven solely by remote sensing observations. Modeled R_s closely tracked the seasonal patterns of measured R_s and explained 74–92% of the variance in R_s with a root mean square error (RMSE) less than 1.0 g C/m²/d. Further validation of the model from SK-OBS site at another two independent sites (SK-OA and SK-OJP, old aspen and old jack pine, respectively) showed that the algorithm can produce good estimates of R_s with an overall R² of 0.78 (p < 0.001) for data of these two sites. Consequently, we mapped R_s of forest landscapes of Saskatchewan using entirely MODIS observations for 2003 and spatial and temporal patterns of R_s were well modeled. These results point to a strong relationship between the soil respiratory process and canopy photosynthesis as indicated from the greenness index (i.e., NDVI), thereby implying the potential of remote sensing data for detecting variations in R_s. A combination of both biological and environmental variables estimated from remote sensing in this analysis may be valuable in future investigations of spatial and temporal characteristics of R_s.     

Yield estimation using SPOT-VEGETATION products: A case study of wheat in European countries

In the period 1999–2009 ten-day SPOT-VEGETATION products of the Normalized Difference Vegetation Index (NDVI) and Fraction of Absorbed Photosynthetically Active Radiation (FAPAR) at 1 km spatial resolution were used in order to estimate and forecast the wheat yield over Europe. The products were used together with official wheat yield statistics to fine-tune a statistical model for each NUTS2 region, based on the Partial Least Squares Regression (PLSR) method. This method has been chosen to construct the model in the presence of many correlated predictor variables (10-day values of remote sensing indicators) and a limited number of wheat yield observations. The model was run in two different modalities: the “monitoring mode”, which allows for an overall yield assessment at the end of the growing season, and the “forecasting mode”, which provides early and timely yield estimates when the growing season is on-going. Performances of yield estimation at the regional and national level were evaluated using a cross-validation technique against yield statistics and the estimations were compared with those of a reference crop growth model. Models based on either NDVI or FAPAR normalized indicators achieved similar results with a minimal advantage of the model based on the FAPAR product. Best modelling results were obtained for the countries in Central Europe (Poland, North-Eastern Germany) and also Great Britain. By contrast, poor model performances characterize countries as follows: Sweden, Finland, Ireland, Portugal, Romania and Hungary. Country level yield estimates using the PLSR model in the monitoring mode, and those of a reference crop growth model that do not make use of remote sensing information showed comparable accuracies. The largest estimation errors were observed in Portugal, Spain and Finland for both approaches. This convergence may indicate poor reliability of the official yield statistics in these countries.     

A novel approach to estimate canopy height using ICESat/GLAS data: A case study in the New Forest National Park,UK

The Geoscience Laser Altimeter System (GLAS) aboard Ice, Cloud and land Elevation Satellite (ICESat) is a spaceborne LiDAR sensor. It is the first LiDAR instrument which can digitize the backscattered waveform and offer near global coverage. Among others, scientific objectives of the mission include precise measurement of vegetation canopy heights. Existing approaches of waveform processing for canopy height estimation suggest Gaussian decomposition of the waveform which has the limitation to properly characterize significant peaks and results in discrepant information. Moreover, in most cases, Digital Terrain Models (DTMs) are required for canopy height estimation. This paper presents a new automated method of GLAS waveform processing for extracting vegetation canopy height in the absence of a DTM. Canopy heights retrieved from GLAS waveforms were validated with field measured heights. The newly proposed method was able to explain 79% of variation in canopy heights with an RMSE of 3.18 m, in the study area. The unexplained variation in canopy heights retrieved from GLAS data can be due to errors introduced by footprint eccentricity, decay of energy between emitted and received signals, uncertainty in the field measurements and limited number of sampled footprints.Results achieved with the newly proposed method were encouraging and demonstrated its potential of processing full-waveform LiDAR data for estimating forest canopy height. The study also had implications on future full-waveform spaceborne missions and their utility in vegetation studies.     

A physically based approach to model LAI from MODIS 250 m data in a tropical region

A time series of leaf area index (LAI) has been developed based on 16-day normalized difference vegetation index (NDVI) data from the Moderate Resolution Imaging Spectroradiometer (MODIS) at 250 m resolution (MOD250_LAI). The MOD250_LAI product uses a physical radiative transfer model which establishes a relationship between LAI, fraction of vegetation cover (FVC) and given patterns of surface reflectance, view-illumination conditions and optical properties of vegetation. In situ measurements of LAI and FVC made at 166 plots using hemispherical photography served for calibration of model parameters and validation of modelling results. Optical properties of vegetation cover, summarized by the light extinction coefficient, were computed at the local (pixel) level based on empirical models between ground-measured tree crown architecture at 85 sampling plots and spectral values in Landsat ETM+ bands. Influence of view-illumination conditions on optical properties of canopy was simulated by a view angle geometry model incorporating the solar zenith angle and the sensor viewing angle. The results revealed high compatibility of the produced MOD250_LAI data set with ground truth information and the 30 m resolution Landsat ETM+ LAI estimated using the similar algorithm. The produced MOD250_LAI was also compared with the global MODIS 1000-m LAI product (MOD15A2 LAI). Results show good consistency of the spatial distribution and temporal dynamics between the two LAI products. However, the results also showed that the annual LAI amplitude by the MOD15A2 product is significantly higher than by the MOD250_LAI. This higher amplitude is caused by a considerable underestimation of the tropical rainforest LAI by the MOD15A2 during the seasonal phases of low leaf production.     

Diurnal and seasonal impacts of urbanization on the urban thermal environment: A case study of Beijing using MODIS data

Beijing has experienced rapid urbanization and associated urban heat island effects and air pollution. In this study, a contribution index was proposed to explore the effect of urbanization on land surface temperature (LST) using Moderate-Resolution Imaging Spectroradiometer (MODIS)-derived data with high temporal resolution. The analysis indicated that different zones and landscapes make diurnally and seasonally different contributions to the regional thermal environment. The differences in contributions by the three main functional zones resulted from differences in their landscape compositions. The roles of landscapes in this process varied diurnally and seasonally. Urban land was the most important contributor to increases in regional LSTs. The contributions of cropland and forest varied distinctly between daytime and nighttime owing to differences in their thermal inertias. Vegetation had a notable cooling effect as the normalized vegetation difference index (NDVI) increased during summer. However, when the NDVI reached a certain value, the nighttime LST shifted markedly in other seasons. The results suggest that urban design based on vegetation partitions would be effective for regulating the thermal environment.     

Intercomparison and validation of MODIS and GLASS leaf area index (LAI) products over mountain areas: A case study in southwestern China

The validation study of leaf area index (LAI) products over rugged surfaces not only gives additional insights into data quality of LAI products, but deepens understanding of uncertainties regarding land surface process models depended on LAI data over complex terrain. This study evaluated the performance of MODIS and GLASS LAI products using the intercomparison and direct validation methods over southwestern China. The spatio-temporal consistencies, such as the spatial distributions of LAI products and their statistical relationship as a function of topographic indices, time, and vegetation types, respectively, were investigated through intercomparison between MODIS and GLASS products during the period 2011–2013. The accuracies and change ranges of these two products were evaluated against available LAI reference maps over 10 sampling regions which standed for typical vegetation types and topographic gradients in southwestern China.The results show that GLASS LAI exhibits higher percentage of good quality data (i.e. successful retrievals) and smoother temporal profiles than MODIS LAI. The percentage of successful retrievals for MODIS and GLASS is vulnerable to topographic indices, especially to relief amplitude. Besides, the two products do not capture seasonal dynamics of crop, especially in spring over heterogeneously hilly regions. The yearly mean LAI differences between MODIS and GLASS are within ±0.5 for 64.70% of the total retrieval pixels over southwestern China. The spatial distribution of mean differences and temporal profiles of these two products are inclined to be dominated by vegetation types other than topographic indices. The spatial and temporal consistency of these two products is good over most area of grasses/cereal crops; however, it is poor for evergreen broadleaf forest. MODIS presents more reliable change range of LAI than GLASS through comparison with fine resolution reference maps over most of sampling regions. The accuracies of direct validation are obtained for GLASS LAI (r = 0.35, RMSE = 1.72, mean bias = −0.71) and MODIS LAI (r = 0.49, RMSE = 1.75, mean bias = −0.67). GLASS performs similarly to MODIS, but may be marginally inferior to MODIS based on our direct validation results. The validation experience demonstrates the necessity and importance of topographic consideration for LAI estimation over mountain areas. Considerable attention will be paid to the improvements of surface reflectance, retrieval algorithm and land cover types so as to enhance the quality of LAI products in topographically complex terrain.     

应用遥感时序数据研究植被变化与气候因子的关系——以环渤海地区为例

在全球气候变化背景下研究陆地植被的时空变化规律,探讨气候因素的驱动作用,对于预测未来气候变化对生态系统的可能影响、制定合适的生态环境保护策略具有重要意义。利用2000—2009年MODIS归一化差值植被指数(normalized difference vegetation index,NDVI)时间序列数据和地面气象站点的气温、降水量数据,从遥感角度分析环渤海地区植被的时空变化,并研究变化与气温、降水的相关关系,探讨区域植被年内和年际变化的驱动因素。结果表明,2000—2009年环渤海地区植被覆盖总体呈增加的趋势,但存在一定的空间异质性,局部有减少的倾向;区域植被的生长受温度和降水的双重驱动,对降水和温度的响应存在明显的滞后,滞后期大约为1个合成期;年际的变化主要受降水和人类活动的影响,降水增加可使区域NDVI提高;不同的人类活动会导致NDVI向相反的方向发展。     

利用MODIS BRDF估算中国东北森林背景反射率——以大兴安岭加格达奇地区为例

基于MODIS二向反射分布函数(BRDF)模型参数产品数据,利用4-scale模型建立查找表,以中国东北大兴安岭加格达奇地区为研究区,反演森林背景反射率,并分析不同森林类型二向反射与背景反射率特性及其季节变化。研究结果表明:(1)研究区针叶林和混交林二向反射特征较为相似,夏季阔叶林在红光波段的二向反射率值均低于针叶林和混交林,而在近红外波段则相反;不同森林类型二向反射率均存在明显的季节变化,其中阔叶林二向反射率季节变化最为明显;(2)研究区夏季森林背景反射率在红光波段较低,均在0.1以下,近红外波段背景反射率普遍高于0.3,且空间差异较大;(3)不同森林类型的背景反射率季节变化趋势大致相同,但变化幅度存在差异:阔叶林的背景反射率值季节差异最大,尤其在近红外波段。     

Satellite-based automated burned area detection: A performance assessment of the MODIS MCD45A1 in the Brazilian savanna

Burnings, which cause major changes to the environment, can be effectively monitored via satellite data, regarding both the identification of active fires and the estimation of burned areas. Among the many orbital sensors suitable for mapping burned areas on global and regional scales, the moderate resolution imaging spectroradiometer (MODIS), on board the Terra and Aqua platforms, has been the most widely utilized. In this study, the performance of the MODIS MCD45A1 burned area product was thoroughly evaluated in the Brazilian savanna, the second largest biome in South America and a global biodiversity hotspot, characterized by a conspicuous climatic seasonality and the systematic occurrence of natural and anthropogenic fires. Overall, September MCD45A1 polygons (2000–2012) compared well to the Landsat-based reference mapping (r² = 0.92) and were closely accompanied, on a monthly basis, by MOD14 and MYD14 hotspots (r² = 0.89), although large omissions errors, linked to landscape patterns, structures, and overall conditions depicted in each reference image, were observed. In spite of its spatial and temporal limitations, the MCD45A1 product proved instrumental for mapping and understanding fire behavior and impacts on the Cerrado landscapes.     

Evaluating MODIS snow products for modelling snowmelt runoff: Case study of the Rio Grande headwaters

Snow-covered area (SCA) is a key variable in the Snowmelt-Runoff Model (SRM) and in other models for simulating discharge from snowmelt. Landsat Thematic Mapper (TM), Enhanced Thematic Mapper (ETM + ) or Operational Land Imager (OLI) provide remotely sensed data at an appropriate spatial resolution for mapping SCA in small headwater basins, but the temporal resolution of the data is low and may not always provide sufficient cloud-free dates. The coarser spatial resolution Moderate Resolution Imaging Spectroradiometer (MODIS) offers better temporal resolution and in cloudy years, MODIS data offer the best alternative for mapping snow cover when finer spatial resolution data are unavailable. However, MODIS’ coarse spatial resolution (500 m) can obscure fine spatial patterning in snow cover and some MODIS products are not sensitive to end-of-season snow cover. In this study, we aimed to test MODIS snow products for use in simulating snowmelt runoff from smaller headwater basins by a) comparing maps of TM and MODIS-based SCA and b) determining how SRM streamflow simulations are changed by the different estimates of seasonal snow depletion. We compared gridded MODIS snow products (Collection 5 MOD10A1 fractional and binary SCA; SCA derived from Collection 6 MOD10A1 Normalised Difference Snow Index (NDSI) Snow Cover), and the MODIS Snow Covered-Area and Grain size retrieval (MODSCAG) canopy-corrected fractional SCA (SCA_MG), with reference SCA maps (SCA_REF) generated from binary classification of TM imagery. SCA_MG showed strong agreement with SCA_REF; excluding true negatives (where both methods agreed no snow was present) the median percent difference between SCA_REF and SCA_MG ranged between −2.4% and 4.7%. We simulated runoff for each of the four study years using SRM populated with and calibrated for snow depletion curves derived from SCA_REF. We then substituted in each of the MODIS-derived depletion curves. With efficiency coefficients ranging between 0.73 and 0.93, SRM simulation results from the SCA_MG runs yielded the best results of all the MODIS products and only slightly underestimated discharge volume (between 7 and 11% of measured annual discharge). SRM simulations that used SCA derived from Collection 6 NDSI Snow Cover also yielded promising results, with efficiency coefficients ranging between 0.73 and 0.91.In conclusion, we recommend that when simulating snowmelt runoff from small basins (<4000 km²) with SRM, we recommend that users select either canopy-corrected MODSCAG or create their own site-specific products from the Collection 6 MOD10A1 NDSI.     

Application of Aqua MODIS sensor data for estimating chlorophyll a in the turbid Case 2 waters of Lake Erie using bio-optical models

There is considerable interest in accurately estimating water quality parameters in turbid (Case 2) and eutrophic waters such as the Western Basin of Lake Erie (WBLE). Lake Erie is a large, open freshwater body that supports diverse ecosystem, and over 12 million people in the mid-western part of the United States depend on it for drinking water, fisheries, navigational, and recreational purposes. The increasing utilization of the freshwater has deteriorated the water severely and currently the lake is experiencing recurring harmful algal blooms (HABs). Improving the water quality of Lake Erie requires the use of robust monitoring tools that help water quality managers understand sources and pathways of influxes that trigger HABs. Satellite-based remote sensing sensor such as the moderate resolution imaging spectroradiometer (MODIS) may provide frequent and synoptic view of the water quality indices. In this study, data set from field measurements was used to evaluate the performance of 14 existing ocean color algorithms. Results indicated that MODIS data consistently underestimated the chlorophyll a concentrations in the WBLE, with the largest source of errors from dissolved organic matter and xanthophyll accessory pigments in this data set. Most of the global algorithms, including OC4v4 and the Baltic model, generated near-identical statistical parameters with an average R² of ~0.57 and RMSE ~2.9 μg/l. MODIS performed poorly (R² ~0.18) when its NIR/red bands were used. A slightly improved model was developed using similar band ratio approach generating R² of ~0.62 and RMSE ~1.8 μg/l.     

Monitoring urban growth on the European side of the Istanbul metropolitan area: A case study

Istanbul is the largest city in Turkey with an area of around 5750 km² and a population of around 10.8 M (2000). In 1980, the population was only around 4.7 M and so has more than doubled in only 2 decades. In 2000, around 65% of the population were living on the European side of the city with its large industrial/commercial and trade centres. The population is increasing as a result of both births exceeding deaths and mass immigration. Consequently, planned and unplanned housing are increasing while green areas are decreasing in area. Monitoring urban growth will enable the Municipality of Istanbul to better manage this complex urban area.     

Atmospheric correction to IRS-P6 AWiFS data and its validation with ground measurements: A study over the semi-arid region

In this study, we have implemented a fast atmospheric correction algorithm to IRS-P6 advanced wide field sensor (AWiFS) satellite data for retrieving surface reflectance under different atmospheric and surface conditions. The algorithm is based on MODIS climatology products and simplified use of Second Simulation of Satellite Signal in Solar Spectrum (6S) radiative transfer code. The algorithm requires information on aerosol optical depth (AOD) for correcting the satellite dataset. The atmospheric correction algorithm has been tested for IRS-P6 AWiFS False colour composites covering the International Crops Research Institute for the Semi-Arid Tropics Farm, Patancheru, Hyderabad, India, under varying atmospheric conditions. Ground measurements of surface reflectance representing different land use/land cover, i.e. red soil, chick pea, groundnut and pigeon pea crops were conducted to validate the algorithm. Terra MODIS AOD₅₅₀ validated with Microtops-II sun photometer–derived AOD₅₀₀ over the urban region of Hyderabad exhibited very good correlation of ～0.92, suggesting possible use of satellite-derived AOD for atmospheric correction.     

An improved dark object method to retrieve 500 m-resolution AOT (Aerosol Optical Thickness) image from MODIS data: A case study in the Pearl River Delta area,China

This paper presents an improved Dark Dense Vegetation (DDV) method for retrieving 500 m-resolution aerosol optical depth (AOT) based on MOD04-C005 arithmetic with the Moderate Resolution Imaging Spectroradiometer (MODIS) from the National Aeronautics and Space Administration (NASA). The improvements include change of the movement pattern of retrieval window, selection of a more suitable aerosol type, and storage of the look-up table. The method is then applied to obtain the AOT over the Pearl River Delta region (PRD). By comparing the results with the co-temporal ground sunphotometer observations in 2010, the correlation coefficient is found to be 0.794 with RMSE 0.139 and their variations remain consistent. Contrasts between model values in 2008 and MODIS AOT products in the same date also reveal a high accuracy of the improved DDV method. We also performed sensitivity tests to analyze the impacts of several parameters on apparent reflectance at different bands, and the results show that apparent reflectance is much more sensitive to surface reflectance and AOT than to elevation.     

The impact of persistent volcanic degassing on vegetation: A case study at Turrialba volcano,Costa Rica

Although the impacts of large volcanic eruptions on the global environment have been frequently studied, the impacts of lower tropospheric emissions from persistently degassing volcanoes remain poorly understood. Gas emissions from persistent degassing exceed those from sporadic eruptive activity, and can have significant long-term (years to decades) effects on local and regional scales, both on humans and the environment. Here, we exploit a variety of high temporal and high spatial resolution satellite-based time series and complementary ground-based measurements of element deposition and surveys of species richness, to enable a comprehensive spatio-temporal assessment of sulfur dioxide (SO₂) emissions and their associated impacts on vegetation at Turrialba volcano (Costa Rica) from 2000 to 2013. We observe increased emissions of SO₂ coincident with a decline in vegetation health downwind of the vents, in accordance with the prevalent wind direction at Turrialba. We also find that satellite-derived vegetation indices at various spatial resolutions are able to accurately define the vegetation kill zone, the extent of which is independently confirmed by ground-based sampling, and monitor its expansion over time. In addition, ecological impacts in terms of vegetation composition and diversity and physiological damage to vegetation, all spatially correspond to fumigation by Turrialba’s plume. This study shows that analyzing and relating satellite observations to conditions and impacts on the ground can provide an increased understanding of volcanic degassing, its impacts in terms of the long-term vegetation response and the potential of satellite-based monitoring to inform hazard management strategies related to land use.     

Assessing factors impacting the spatial discrepancy of remote sensing based cropland products: A case study in Africa

Many African countries are facing increasing risks of food insecurity due to rising populations. Accurate and timely information on the spatial distribution of cropland is critical for the effective management of crop production and yield forecast. Most recent cropland products (2015 and 2016) derived from multi-source remote sensing data are available for public use. However, discrepancies exist among these cropland products, and the level of discrepancy is particularly high in several Africa regions. The overall goal of this study was to identify and assess the driving factors contributing to the spatial discrepancies among four cropland products derived from remotely sensed data. A novel approach was proposed to evaluate the spatial agreement of these cropland products and assess the impact of environmental factors such as elevation dispersion, field size, land-cover richness and frequency of cloud cover on these spatial differences. Results from this study show that the overall accuracies of the four cropland products are below 65%. In particular, large disagreements are seen on datasets covering Sahel zone and along the West African coasts. This study has identified land-cover richness as the driving factor with the largest contribution to the spatial disagreement among cropland products over Africa, followed by the high frequency of cloud cover, small and fragmented field size, and elevation complexity. To improve the accuracy of future cropland products for African regions, the data producers are encouraged to take a multi-classification approach and incorporate multi-sensors into their cropland mapping processes.     

Remote sensing of Red Mediterranean soils: a case study in the viticultural southern Rhone Valley using SPOT satellite imagery

The aim of this work was to map Red Mediterranean soils, for which no previous mapping approach exists, using optical multispectral satellite remote sensing data. This case study explores the use of SPOT XS images over the viticultural Southern Rhone Valley, France, to map exposed vineyard soils. Field spectral measurements were used to distinguish Red Mediterranean soil surfaces during Spring 1999. A supervised maximum likelihood classification was applied to sparsely vegetated and unvegetated surfaces of two spring images from 1995 and 1997, drawing on the field training set and available soil data. Similar global spatial segmentation was obtained despite different soil surface states on these dates. Classification performances were higher than 84% in both images. Mean classification accuracies of Red Mediterranean soils at seven reference surfaces were 60% in 1995 and 70% in 1997. This suggests that the direct use of optical remote sensing data at medium resolution can be useful for mapping bare Red Mediterranean soils.     

An integrated remote sensing and GIS approach for monitoring areas affected by selective logging: A case study in northern Mato Grosso,Brazilian Amazon

Forest cover disturbances due to processes such as logging and forest fires are a widespread issue especially in the tropics, and have heavily affected forest biomass and functioning in the Brazilian Amazon in the past decades. Satellite remote sensing has played a key role for assessing logging activities in this region; however, there are still remaining challenges regarding the quantification and monitoring of these processes affecting forested lands. In this study, we propose a new method for monitoring areas affected by selective logging in one of the hotspots of Mato Grosso state in the Brazilian Amazon, based on a combination of object-based and pixel-based classification approaches applied on remote sensing data. Logging intensity and changes over time are assessed within grid cells of 300 m × 300 m spatial resolution. Our method encompassed three main steps: (1) mapping forest/non-forest areas through an object-based classification approach applied to a temporal series of Landsat images during the period 2000–2015, (2) mapping yearly logging activities from soil fraction images on the same Landsat data series, and (3) integrating information from previous steps within a regular grid-cell of 300 m × 300 m in order to monitor disturbance intensities over this 15-years period. The overall accuracy of the baseline forest/non-forest mask (year 2000) and of the undisturbed vs disturbed forest (for selected years) were 93% and 84% respectively. Our results indicate that annual forest disturbance rates, mainly due to logging activities, were higher than annual deforestation rates during the whole period of study. The deforested areas correspond to circa 25% of the areas affected by forest disturbances. Deforestation rates were highest from 2001 to 2005 and then decreased considerably after 2006. In contrast, the annual forest disturbance rates show high temporal variability with a slow decrease over the 15-year period, resulting in a significant increase of the ratio between disturbed and deforested areas. Although the majority of the areas, which have been affected by selective logging during the period 2000–2014, were not deforested by 2015, more than 70% of the deforested areas in 2015 had been at least once identified as disturbed forest during that period.     

Understanding heterogeneity in metropolitan India: The added value of remote sensing data for analyzing sub-standard residential areas

Analyzing the heterogeneity in metropolitan areas of India utilizing remote sensing data can help to identify more precise patterns of sub-standard residential areas. Earlier work analyzing inequalities in Indian cities employed a constructed index of multiple deprivations (IMDs) utilizing data from the Census of India 2001 (http://censusindia.gov.in). While that index, described in an earlier paper, provided a first approach to identify heterogeneity at the citywide scale, it neither provided information on spatial variations within the geographical boundaries of the Census database, nor about physical characteristics, such as green spaces and the variation in housing density and quality. In this article, we analyze whether different types of sub-standard residential areas can be identified through remote sensing data, combined, where relevant, with ground-truthing and local knowledge. The specific questions address: (1) the extent to which types of residential sub-standard areas can be drawn from remote sensing data, based on patterns of green space, structure of layout, density of built-up areas, size of buildings and other site characteristics; (2) the spatial diversity of these residential types for selected electoral wards; and (3) the correlation between different types of sub-standard residential areas and the results of the index of multiple deprivations utilized at electoral ward level found previously.     

基于光能利用效率的区域蒸散量反演模型——以玉米种植区为例

以内蒙古河套地区解放闸灌域为研究区域,以实测生物量与土壤含水量及其关系方程为研究基础,建立了基于光能利用效率(radiation use efficiency,RUE)的区域蒸散量反演模型;以陆面能量平衡(surface energy balance algorithm for land,SEBAL)模型为参考,对反演的同一时期的区域蒸散量进行对比分析.结果表明:RUE与SEBAL模型反演的区域蒸散量在空间分布和纹理特征方面具有相似性且相关性较高,决定系数高于农业技术推广支持系统(decision support system for agrotechnology transfer,DSSAT)与SEBAL的;基于RUE建立的区域蒸散量反演模型能够较好地反映区域蒸散量,在监测区植被(或作物)单一的前提下,是一种有效方法.