流动沸腾传热的矢量合成模型

初步分析在论文中提出的新模型的理论基础,并改进流动沸腾传热中对流蒸发项的计算,利用杨伟构造的渐进加和模型计算窄矩形流道中流动沸腾传热的对流蒸发项;还利用所提出的矢量合成模型预测了圆管内的流动沸腾传热系数。实验数据关联表明,所构造的模型适合窄矩形流道和圆管流道内流动沸腾传热系数的计算。     

釜式再沸器壳侧循环流动与管束传热的分格模型

通过对管束壳侧循环流动沸腾传热的分析，提出了管束沸腾传热的薄层蒸发传热增强贡献的计算公式，建立了釜式再沸器壳侧循环流动与管束传热的分格模型，利用此模型，对管束传热系数及循环流速进行了模拟计算。验证结果表明，由本模型计算所得管束沸腾传热系数与实验结果吻合较好。     

流动沸腾核态抑制的实验研究

通过对水在垂直矩形通道内的流动沸腾实验,研究了流动沸腾核态抑制的规律,确定了不同流动沸腾区域的分布。沸腾抑制点参数,可以用空穴最大和最小半径的比值表示(rmax/rmin)sup,描述不同的流动沸腾状态。当最大空穴半径趋近于最小空穴半径时,活化核心密度减小,核态沸腾受到抑制。最大空穴半径的变化是决定流动沸腾抑制点参数的主因。流动沸腾的3个状态分布如下:(rmax/rmin)sup<40,对流沸腾状态;40≤(rmax/rmin)sup≤120,不确定状态;(rmax/rmin)sup>120,核态沸腾状态。     

混合物流动沸腾传热研究

引言由于热泵技术发展的需要,多组分混合物流动沸腾传热的计算方法已成为当前传热研究的前沿课题．经研究发现当前的流动沸腾传热模型并非都能适用于多组分的计算．比如,加和模型由于抑制因子S与混合工质的种类及组成有关,而当前又尚未研究出一个通用算式,故使该模型在用于多组分混合物流动沸腾传热时遇到困难．造成困难的主要原因是混合物流动沸腾传热过程中传质阻力的影响不容忽视,然而混合物传质系数的计算又非常困难,目前尚无可用于实际系统的理论方法,实验数据也很少,还停留在经验阶段．近些年虽然对流动沸腾传质阻力的校正提…     

微小通道内流动沸腾换热的预测新模型

为了得到适用于微小通道内流动沸腾换热的预测方法,本文以近些年发表的9篇文献中的2924个实验数据点组成数据库,考虑到随着通道直径减小,表面张力对微小通道内两相流动和换热的影响起到主要作用,将Chen形式的换热模型中的核态沸腾和对流换热两部分的修正系数进行了优化。沸腾抑制系数和对流增强系数由气相韦伯数、两相雷诺数、沸腾数、气泡抑制数等量纲为1数组成,反映出了表面张力、水力直径、流动条件、热力条件对于换热的综合影响。结果表明,拟合出的微小通道中沸腾换热的新模型,适于预测水力直径3 mm以下的细管道中CHF（临界热流密度）点以前的换热系数。与实验数据比较,新模型预测的平均绝对误差为19.0%。     

垂直管内降膜沸腾传热的研究

本文提出了降膜沸腾传热的物理模型和数学模型,全面考虑了对流流动与核式沸腾对膜传热系数的影响,以及液体流动对液膜内核式沸腾的抑制作用。该模型计算值与实验值吻合较好。     

流动沸腾传热渐进模型的一种修正形式

在对文献模型进行分析的基础上,提出流动沸腾传热渐进模型的一个修正形式。探讨了该形式的合理性,并对该修正形式与实验数据的吻合情况进行了检测。结果显示,该修正形式能较好地预测窄矩形流道内流动沸腾传热的传热系数     

垂直多孔表面管内高沸点工质强化流动沸腾换热的数值分析

在对流动特性和换热机理进行分析的基础上,建立了垂直多孔表面管内高沸点工质强化流动沸腾换热的数学模型和数值计算方法.该模型认为环状流区域同时存在强制对流与核态沸腾两种换热方式.液膜厚度、速度与温度等参数通过求解液膜的质量守恒、动量守恒、能量守恒方程获得.核态沸腾换热则包括气泡脱离带走的热量及用于加热气化核心影响区流入液体的热量两部分.提出了流动沸腾情况下的多孔层气泡脱离直径及气化核心密度计算方法.对异丙苯在火焰喷涂型垂直多孔表面管内向上流动时的沸腾换热进行了数值预测,大部分工况的计算值与实验结果符合良好.在低干度区(x=0.1),核态沸腾在总换热中的比例约为50%.随着干度的增加,核态沸腾受到越来越大的抑制,当x为0.5时,这一比例降低到约15％.     

煤油在内螺纹管中流动沸腾强化传热特性

针对石油化工过程中沸腾传热设备技术改造的需要 ,在 3× 1 0 5Pa (绝对压力 )的条件下 ,对煤油在垂直内螺纹管中的上升流动沸腾传热进行了实验研究 ,将实验结果同煤油在光管中的实验结果进行了比较 .实验结果表明 ,内螺纹管中的沸腾换热系数是光管的 1 6～ 2倍 ,并且可在小温差条件下实现流动沸腾传热 .提出了煤油在内螺纹管中的流动沸腾换热系数的关联式 ,并对煤油在内螺纹管中的流动沸腾特性和强化传热机理进行了分析 .     

添加剂对流动沸腾传热的影响

研究了添加剂对垂直管内流动沸腾传热的影响,选用W/O型聚丙烯酰胺(简称PAM)和十八烷胺(简称ODA)为添加剂,研究添加剂水溶液的性质、添加剂浓度、流速、热通量、聚合物分子量等因素对流动沸腾传热的影响.采用X光射线光电子能谱仪测试了添加剂分子在管壁上的吸附情况,并对壁面特性进行了分析.研究结果表明,W/O型聚丙烯酰胺和十八烷胺都具有强化流动沸腾传热的性能,而且有最佳浓度范围。PAM还具有减阻性能,因而可提高流速来强化流动沸腾传热。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料，介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比，介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序，对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

Inorganic/organic nanocomposite coatings: The next step in coating performance

Inorganic/organic hybrid materials have considerable promise and are beginning to become a major area of research for many coating usages, including abrasion and corrosion resistance. Our primary approach is to prepare the inorganic phase in situ within the film formation process of the organic phase. The inorganic phase is introduced via sol-gel chemistry into a thermosetting organic phase. By this method, the size, periodicity, spatial positioning, and density of the inorganic phase can be controlled. An important aspect of the inorganic/organic hybrid materials is the coupling agent. The initial task of the coupling agent is to provide uniform mixing of the oligomeric organic phase with the sol-gel precursors, which are otherwise immiscible. UV-curable inorganic/organic hybrid systems have the advantages of a rapid cure and the ability to be used on heat sensitive substrates such as molded plastics. Also, it is possible to have better control of the growth of the inorganic phase using UV curing. It is our ultimate goal to completely separate the curing of inorganic and organic phases to gain complete control over the morphology, and hence optimization of “all” the coating properties. Thus far, it has been found that concomitant UV curing of the inorganic and organic phases using titanium sol-gel precursors afforded nanocomposite coatings which completely block the substrate from UV light while maintaining a transparent to visible light. Also, it has been found that the morphology of the inorganic phase is highly dependent on the concentration and reactivity of the coupling agent. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Some Large Wood-Boring Beetles in Southeastern USA

Ethanol and α-pinene were tested as attractants for large wood-boring pine beetles in Alabama, Florida, Georgia, North Carolina, and South Carolina in 2002–2004. Multiple-funnel traps baited with (−)-α-pinene (released at about 2 g/d at 25–28°C) were attractive to the following Cerambycidae: Acanthocinus nodosus, A. obsoletus, Arhopalus rusticus nubilus, Asemum striatum, Monochamus titillator, Prionus pocularis, Xylotrechus integer, and X. sagittatus sagittatus. Buprestis lineata (Buprestidae), Alaus myops (Elateridae), and Hylobius pales and Pachylobius picivorus (Curculionidae) were also attracted to traps baited with (−)-α-pinene. In many locations, ethanol synergized attraction of the cerambycids Acanthocinus nodosus, A. obsoletus, Arhopalus r. nubilus, Monochamus titillator, and Xylotrechus s. sagittatus (but not Asemum striatum, Prionus pocularis, or Xylotrechus integer) to traps baited with (−)-α-pinene. Similarly, attraction of Alaus myops, Hylobius pales, and Pachylobius picivorus (but not Buprestis lineata) to traps baited with (−)-α-pinene was synergized by ethanol. These results provide support for the use of traps baited with ethanol and (−)-α-pinene to detect and monitor common large wood-boring beetles from the southeastern region of the USA at ports-of-entry in other countries, as well as forested areas in the USA.