TiO_2聚苯胺复合膜的光电化学

利用电化学方法制备了TiO2 聚苯胺 (PANI)复合膜 .该膜具有比TiO2 或PANI膜更宽的吸收谱区 ,并且不同于利用聚苯胺光敏化的TiO2 膜 ,表现为两者复合材料膜的性质 .扫描电镜图表明 ,TiO2 微粒不完全覆盖着PANI膜 .根据TiO2 微粒光电流谱带的阈值能可得复盖在部分氧化态聚苯胺膜上的TiO2 微粒的禁带宽度为 3.0eV .部分氧化态聚苯胺膜的光电流谱遵循Fowler定律 ( 1/2 ～hυ成线性 ) .通过Fowler图得出部分氧化态聚苯胺的绝缘母体禁带宽度为 3.33eV ,并证实该绝缘母体为还原态聚苯胺 .从Mott Schottky图得到在 0 .0 5mol/LK3Fe(CN) 6 /K4 Fe(CN) 6 溶液中 (pH =8.52 )部分氧化态聚苯胺的平带电位为 0 .13V ,掺杂浓度为 5.3× 10 18cm- 3;TiO2 PANI复合膜的平带电位为 - 0 .6 5V ,掺杂浓度为 9.1× 10 19cm- 3.解释了TiO2 PANI复合膜的光电化学过程并描绘出其能带图 .利用TiO2 PANI复合膜能够有效地光降解苯酚溶液 .     

纳米尺度TiO2微粒多孔膜电极光电化学

用光电流作用谱、光电流-电势图和瞬态光电流谱等光电化学方法研究了TiO2多孔膜电极在含不同氧化还原体系的电解质溶液中的光电转换过程.结果说明TiO2多孔股为n-型半导体，其禁带宽度为3.26eV.当在电解质溶液中加入醌二苯酸（BQ／HQ），TiO2多孔膜电极的光电流作用谱形基本与没加氧化还原对时类似。在可见光区的光电流拖尾是由于醌被光激发，然后给出电子到TiO2多孔膜导带而产生阳极光电流.而在电解质溶液中加入Fe（CN）3-6-／4-时，TiO2多孔膜电极的光电流作用谱有明显的改变.除了在小于380nm短波区有光电流峰外，还在400-600nm的可见光区观察到宽的光电流峰，大大增加了光电流转换效率.同时在小于-0.2V下为阳极光电流，在-0.2V～0.3V电势区间为明显阴极光电流，在大于0.3V下可观察到较弱的阳极光电流.当电极电势大于-0.2V时，光电流瞬态谱在开始光照时有一阴极瞬态光电流尖峰，然后转变为阳极稳态光电流.这是因为当电极电势较负时，Fe（CN）4-6与TiO2的电子传递络合物可以吸收光子，光生电子迅速注入TiO2导带，然后还原溶液中的而产生阴极光电流.     

Au/PATP/PANI膜电极和Au/PATP/PANI/TiO2膜电极的光电化学

聚苯胺（PANI）是一种结构、 性质不同于聚乙炔和聚吡咯的新型导电高聚物,有着十分广泛的应用[1,2].近年来利用光电化学研究聚苯胺的电子结构、 掺杂情况引起人们的重视[3～5].在酸性溶液中电聚合制备聚苯胺的循环伏安曲线上出现两对氧化还原峰,其峰值电位分别为E11/2=0.13 V和E21/2=0.7 V(对饱和甘汞电极).通过改变电极电位,可获得部分氧化态、还原态、氧化态等3种状态的聚苯胺.部分氧化态具有金属导电性,还原态和氧化态均为绝缘体.本文测量3种状态聚苯胺膜电极的光电响应,首次得到其光电流谱,发现聚苯胺一些新的光电化学实验结果.提出了覆盖绝缘体的金属内发射的光电化学模型.同时,在聚苯胺膜上电沉积纳米TiO2微粒膜,得到广谱区的复合光电材料.     

纳米尺度TiO2聚苯胺多孔膜电极光电化学研究

用光电流作用谱，光电流－电势图等光电化学方法研究了ＴｉＯ２／聚本胺复合多孔膜电极在不含氧化还原和含有没氧化还原对体系中的光电转换过程。结果说明，ＴｉＯ２／聚苯胺复合多孔膜电极为双层ｍ－型半导体结构，ＴｉＯ２多孔膜的禁带宽度为３．２ｅＶ，外层聚苯胺膜的禁带宽度为２．８８ｅＶ。     

导电高聚物修饰纳米尺度TiO~2多孔膜电极的光电化学研究

用光电化学方法研究了用导电高聚物修饰的纳米晶TiO~2多孔膜电极在不含氧化还原对和含不同氧化还原对体系电解质溶液中的光电转换过程。TiO~2/导电高聚物多孔膜电极为双层n型半导体结构,内层TiO~2多孔膜的禁带宽度为3.26eV,外层聚吡咯(PPy)膜的禁带宽度为2.23eV,而聚苯胺(PAn)膜的禁带宽度为2.88eV。用导电高聚物修饰半导体电极能使其在可见光区的光吸收增加,光电流增强,且起始波长红移至>600nm,使宽禁带半导体电极的光电转换效率得到明显改善。     

纳米尺度TiO2／聚吡咯多孔膜电极光电化学研究

用光电流作用谱，光电流－电势图和ＵＶ－Ｖｉｓ光说研究了ＴｉＯ２／聚吡咯多孔膜电极在不含氧化还原对和含不同氧化还原体系电解质溶液中的光电转换过程。ＴｉＯ２／聚吡咯多孔膜电极双层ｎ型半导体结构，内层ＴｉＯ２多孔膜的禁带宽度为３．２６ｅＶ，外层聚吡咯膜的禁带宽度为２．２ｅＶ。     

纳米结构TiO2/3-甲基噻吩和2-噻吩甲酸共聚物复合膜电极光电化学性能

用光电流作用谱、光电流-电势图等光电化学方法研究了ITO/3-甲基噻吩和2-噻吩甲酸共聚物(CTCMT)膜电极和ITO/TiO₂/CTCMT复合膜电极的光电转换性质.结果表明,CTCMT膜为p型半导体,禁带宽度为2.36eV,价带位置为-5.52eV.在ITO/TiO₂/CTCMT复合膜电极中存在p-n异质结,在一定条件下异质结的存在有利于光生电子-空穴对的分离.CTCMT膜修饰ITO/TiO₂电极可使光电流增强,光电流起始波长红移至600nm以上,使宽禁带半导体电极的光电转换效率得到改善.     

纳米结构TiO2/聚3-甲基噻吩多孔膜电极光电化学研究

用光电流作用谱、光电流-电势图、紫外-可见吸收光谱等光电化学方法研究了导电玻璃(ITO)/TiO₂/聚3-甲基噻吩(PMT)电极的光电转换性质. 结果表明, PMT膜为p型半导体, 其禁带宽度为1.93 eV. 并通过循环伏安和光电化学方法确定了其导带位置为－3.44 eV, 价带为－5.37 eV, 在纳米TiO₂与PMT之间存在p-n异质结, ITO/TiO₂/PMT电极不仅提高了光电流, 而且使产生光电流的起始波长红移至＞600 nm, 从而提高了宽禁带半导体的光电转换效率.     

纳米结构TiO2/聚3-甲基噻吩多孔膜电极光电化学研究

用光电流作用谱、光电流-电势图、紫外-可见吸收光谱等光电化学方法研究了导电玻璃(ITO)/TiO₂/聚3-甲基噻吩(PMT)电极的光电转换性质. 结果表明, PMT膜为p型半导体, 其禁带宽度为1.93 eV. 并通过循环伏安和光电化学方法确定了其导带位置为－3.44 eV, 价带为－5.37 eV, 在纳米TiO₂与PMT之间存在p-n异质结, ITO/TiO₂/PMT电极不仅提高了光电流, 而且使产生光电流的起始波长红移至＞600 nm, 从而提高了宽禁带半导体的光电转换效率.     

纳米结构TiO2/聚3-己基噻吩多孔膜电极光电性能研究

用光电流作用谱、光电流-电势图等光电化学方法研究了ITO/聚3-己基噻吩(ITO/ P3HT)膜和纳米结构TiO2/聚3-己基噻吩(TiO2/P3HT)复合膜的光电转换性质. 结果表明, P3HT膜的禁带宽度为1.89 eV, 价带位置为－5.4 eV. 在ITO/TiO2/ P3HT复合膜电极中存在p-n异质结, 在一定条件下异质结的存在有利于光生电子-空穴对的分离. P3HT修饰ITO/TiO2电极可使光电流发生明显的红移, 从而提高了宽禁带半导体的光电转换效率.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.