Rhodamine based derivative and its zinc complex: synthesis and recognition behavior toward Hg(II)

A simple fluorescent probe, which contains rhodamine and aminoquinoline moieties, was designed and prepared for selective detection of Hg²⁺ in acetonitrile. RbQ exhibited high selectivity and sensitivity toward Hg²⁺ over other common metal ions. The recognition of RbQ toward Hg²⁺ can be detected by fluorescence spectra, absorption spectra, and even by naked eyes. The binding ratio of the RbQ–Hg²⁺ complex was found to be 1:1 according to Job plot experiment, and the limit of detection was 1.05×10⁻⁷ M. Moreover, the prepared complex RbQ–Zn²⁺ (RbQZ) could detect Hg²⁺ in a ratiometric way and showed lower limit of detection (2.95×10⁻⁸ M) than RbQ in the same condition. Finally, we also demonstrated that the aminoquinoline–zinc complex could be served as a new and effective FRET donor for rhodamine derivatives.     

Ratiometric fluorescent and colorimetric sensors for Cu based on 4,5-disubstituted-1,8-naphthalimide and sensing cyanide via Cu displacement approach

Two 4,5-disubstituted-1,8-naphthalimide derivatives 1 and 2 were synthesized as ratiometric fluorescent and colorimetric sensors for Cu²⁺, respectively. In 100% aqueous solutions of 1, the presence of Cu²⁺ induces a strong and increasing fluorescent emission centered at 478 nm at the expense of the fluorescent emission of 1 centered at 534 nm. Compound 2 senses Cu²⁺ by means of a colorimetric (primrose yellow to pink) method with a thorough quench in emission attributed to the deprotonation of the secondary amine conjugated to the naphthalimide fluorophore. 1-Cu²⁺ and 2-Cu²⁺ sense cyanide in ratiometric way via colorimetric and fluorescent changes.     

Ratiometric fluorescence chemosensors for copper(II) and mercury(II) based on FRET systems

A system based on FRET mechanism, comprising a coumarin donor and a rhodamine acceptor, was developed for the selective and quantitative detection of metal ions. Fluorescent chemosensors RCs, linked by 1,2-diethylamine, exhibit significant fluorescence enhancement and excellent selectivity toward Cu²⁺. Fluorescent probes CRB and CR6G, linked by hydrazide, function as ratiometric receptors for Cu²⁺ chromogentically and fluorogentically in organic-aqueous media. Furthermore, the characteristic rhodamine-based fluorescence response of CRB (excitation at 550 nm) exhibits high selectivity for Hg(II). The construction of this kind of universal FRET system opens a broader prospect for future design of ratiometric fluorescent probes.     

A new Fe fluorescent chemosensor based on aggregation-induced emission

A new tetraphenylethylene (TPE)-based sensor M1 bearing double 2-methylpyridyl-2-methylthiophenylamino units linked with triazole moieties was reported. Both UV–vis and fluorescence spectroscopic studies demonstrated that M1 was highly sensitive and selective toward Fe³⁺ over other metal ions in THF/H₂O solution based on the aggregation-induced emission quenching mechanism. The lowest detection limit of M1 for Fe³⁺ is 0.7 μM. The detailed fluorescent titration study suggested that the binding stoichiometry of the M1–Fe³⁺ complex was 1:2, and the structure between M1 and the Fe³⁺ complex was confirmed by the ¹H NMR titration.     

Highly selective detection of Hg ion by push–pull-type purine nucleoside-based fluorescent sensor

Highly selective detection of Hg²⁺ ion has been achieved using the push–pull-type purine nucleoside-based fluorescent sensor L1. The sensor L1 incorporating aza-18-crown-6 at C6 position of purine nucleoside, is highly sensitive and selective toward Hg²⁺ ion in CH₃CN–H₂O mixture (92/8, v/v). The detection limit for the fluorescent sensor L1 toward Hg²⁺ ion is 7.8 × 10⁻⁸.     

A ratiometric fluorescent probe for iron(III) and its application for detection of iron(III) in human blood serum

A simple and versatile ratiometric fluorescent Fe³⁺ detecting system, probe 1, was rationally developed based on the Fe³⁺-mediated deprotection of acetal reaction. Notably, this reaction was firstly employed to design fluorescent Fe³⁺ probe. Upon treatment with Fe³⁺, probe 1 showed ratiometric response, with the fluorescence spectra displaying significant red shift (up to 132 nm) and the emission ratio value (I₅₂₂/I₃₉₀) exhibiting approximately 2362-fold enhancement. In addition, the probe is highly sensitive (with the detection limit of 0.12 μM) and highly selective to Fe³⁺ over other biologically relevant metal ions. The sensing reaction product of the probe with Fe³⁺ was confirmed by NMR spectra and mass spectrometry. TD-DFT calculation has demonstrated that the ratiometric response of probe 1 to Fe³⁺ is due to the regulation of intramolecular charge transfer (ICT) efficiency. Moreover, the practical utility in fluorescence detection of Fe³⁺ in human blood serum was also conducted, and probe 1 represents the first ratiometric fluorescent probe that can be used to monitor Fe³⁺ level in human blood serum. Finally, probe 1 was further employed in living cell imaging with pancreatic cancer cells, in which it displayed low cytotoxicity, satisfactory cell permeability, and selective ratiometric response to Fe³⁺.     

An efficient sensor for relay recognition of Zn and Cu through fluorescence ‘off–on–off’ functionality

A new bis(8-carboxamidoquinoline) dangled binaphthol derivatized fluorescent sensor (L) was designed and synthesized. L behaves ratiometric response to Zn²⁺ with high selectivity accompanied by remarkable emission enhancement and red shift. The resultant L–Zn²⁺ complex can act as a Cu²⁺ sensing probe with fluorescence quenching behavior through direct Zn²⁺ ion replacement. Furthermore, the binding modes of Zn²⁺ and Cu²⁺ with L are elucidated by X-ray crystallographic analysis, respectively.     

A naked-eye rhodamine-based fluorescent probe for Fe(III) and its application in living cells

A naked-eye turn-on fluorescent Fe³⁺ probe (RQ6) was developed by linking a new conjugated quinoline fluorescent group to the rhodamine platform. The probe can detect Fe³⁺ with high selectivity over other metal ions. Bioimaging studies indicated that RQ6 was cell permeable and suitable for detecting Fe³⁺ in the living cells by confocal microscopy.     

Mercury assisted fluorescent supramolecular assembly of hexaphenylbenzene derivative for femtogram detection of picric acid

Aggregates of hexaphenylbenzene derivatives 3, having pyrene groups form network of fluorescent nanofibres in presence of mercury ions. Further, fluorescent nanofibres of 3-Hg²⁺ supramolecular ensemble exhibit sensitive and pronounced response towards the picric acid. In addition, the solution coated paper strips of 3-Hg²⁺ supramolecular ensemble can detect picric acid in the range of 2.29 fg/cm², thus, providing a simple, portable and low cost method for detection of picric acid in solution and in contact mode.     

Synthesis and photophysical properties of water-soluble sulfonato-Salen-type Schiff bases and their applications of fluorescence sensors for Cu in water and living cells

A series of water-soluble sulfonato-Salen-type ligands derived from different diamines including 1,2-ethylenediamine (Et-1–Et-4), 1,2-cyclohexanediamine (Cy-1 and Cy-2), 1,2-phenylenediamine (Ph-1–Ph-3 and PhMe-1–PhMe-4), and dicyano-1,2-ethenediamine (CN-1) has been designed and prepared. Sulfonate groups of ligands ensure good stability and solubility in water without affecting their excited state properties. These ligands exhibit strong UV/Vis-absorption and blue, green, or orange fluorescence. Time-dependent-density functional theory calculations have been undertaken to reveal the influence of ligand nature, especially sulfonate groups, on the frontier molecular orbitals. Since their fluorescence is selectively quenched by Cu²⁺, the sulfonato-Salen-type ligands can be used as highly selective and sensitive turn-off fluorescence sensors for the detection of Cu²⁺ in water and fluorescence imaging in living cells.     

Fluorogenic ratiometric dipodal optode containing imine-amide linkages: Exploiting subtle thorium (IV) ion sensing

The (13E,19E)-N1′,N3′-bis[4-(diethylamino)-2-hydroxybenzylidene]malonohydrazide (L) has been developed for the detection of Th⁴⁺ ions using dual channel signalling system. The UV–vis absorbance and fluorescence spectroscopic data revealed the formation of L–Th⁴⁺ complex in 1:1 equilibrium. The density functional theory (DFT) also confirms the optimum binding cavity for the recognition of metal ion. The binding constant computed from different mathematical models for an assembly of L–Th⁴⁺. The detection limit of L for Th⁴⁺ recognition is to a concentration down to 0.1 μM (0.023 μg g⁻¹). The present sensing system is also successfully applied for the detection of Th⁴⁺ ion present in soil near nuclear atomic plants.     

Linear Schiff-base fluorescence probe with aggregation-induced emission characteristics for Al detection and its application in live cell imaging

A simple Schiff-base derivative with salicylaldehyde moieties as fluorescent probe 1 was reported by aggregation-induced emission (AIE) characterization for the detection of metal ions. Spectral analysis revealed that probe 1 was highly selective and sensitive to Al³⁺. The probe 1 was also subject to minimal interference from other common competitive metal ions. The detection limit of Al³⁺ was 0.4 μM, which is considerably lower than the World Health Organization standard (7.41 μM), and the acceptable level of Al³⁺ (1.85 μM) in drinking water. The Job's plot and the results of ¹H-NMR and FT-IR analyses indicated that the binding stoichiometry ratio of probe 1 to Al³⁺ was 1:2. Probe 1 demonstrated a fluorescence-enhanced response upon binding with Al³⁺ based on AIE characterization. This response was due to the restricted molecular rotation and increased rigidity of the molecular assembly. Probe 1 exhibited good biocompatibility, and Al³⁺ was detected in live cells. Therefore, probe 1 is a promising fluorescence probe for Al³⁺ detection in the environment.     

A two-photon excited luminescence of water-soluble rhodamine-platinum(II) complex: fluorescent probe specific for Hg2+ detection in live cell

The first example of cyclometalated platinum(II)-containing rhodamine probe (1) with two-photon induced luminescent properties was synthesized and investigated for mercury detection. A highly selective color change of 1, from light yellow to pink, is observed only in the presence of Hg²⁺ due to the formation of 1,3,4-oxadiazole ring in 2. This selectivity of Hg²⁺ with color changes can be observed easily by the naked-eye. Meanwhile, a remarkable turn-on and selective 20-fold fluorescent enhancement of 1 upon binding with Hg²⁺ over the other tested metal ions was observed. The water-soluble probe 1 was successfully applied in the visualizing of the site of Hg²⁺ accumulation as well as estimating of trace amounts of mercury ions in live HeLa cells by two-photon microscopy.     

Ratiometric near-infrared chemosensor for trivalent chromium ion based on tricarboyanine in living cells

A tricarboyanine derivative (IRPP) is applied as a ratiometric near-infrared chemosensor for detecting trivalent chromium ions (Cr³⁺) in living cells. Upon the addition of Cr³⁺ to a solution of IRPP, large-scale shifts in the emission spectrum (from 755 nm to 561 nm) are observed. In the newly developed sensing system, these well-resolved emission peaks yield a sensing system that covers a linear range from 1.0 × 10⁻⁷ to 1.0 × 10⁻⁵ M with a detection limit of 2.5 × 10⁻⁸ M. The experimental results show the response behavior of IRPP towards Cr³⁺ is pH independent under neutral conditions (6.0–7.5). Most importantly, the fast response time (less than 3 min) and selectivity for Cr³⁺ over other common metal ions provide a strong argument for the use of this sensor in real world applications. As a proof of concept, the proposed chemosensor has been used to detect and quantify Cr³⁺ in river water samples and to image Cr³⁺ in living cells with encouraging results.     

Three-step pathway towards bis(1,2,3-triazolyl-γ-propylsilatranes) as Cu fluorescent sensor,via ‘Click Silylation’

A series of substituted aniline derivatized bis(1,2,3-triazolyl-γ-propylsilatranes) 3a–3f were designed in good yield from their triethoxysilane analogues via Cu(I) ‘Click Silylation’. All the silatranes 3a–3f were characterized by IR, NMR (¹H, ¹³C) and HRMS studies. All these compounds were explored for their thermal stability by thermogravimetric analysis (TGA)/differential thermal analysis (DTA)/differential scanning calorimetry (DSC) study and electronic properties by UV–vis spectroscopy and fluorescence study. The binding of silatranes 3a–3f to Cu²⁺ ion proves them to be good chemosensor. These silatranes were subjected to time dependent hydrolysis under normal atmospheric conditions. IR spectroscopic data support hydrolytic instability of 3a, 3c and 3e.     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

Luminophore-immobilized mesoporous silica for selective Hg sensing

Novel mesoporous silica-immobilized rhodamine (MSIR) and silica particle-immobilized rhodamine (SPIR) anchored by a tren (N(CH₂CH₂NH₂)₃) were synthesized. The binding and adsorption abilities of both MSIR and SPIR for metal cations were investigated with fluorophotometry and ion chromatography, respectively. Both MSIR and SPIR show selectivity for Hg²⁺ ion over other metal cations because the Hg²⁺ ion selectively induces a ring opening of the rhodamine fluorophores. The sensitivity of the MSIR for Hg²⁺ ion is greater than that of the SPIR and the MSIR adsorbs 70% of Hg²⁺ ion while the SPIR does only 40%. The MSIR can be also easily recovered by treatment of a solution of TBA⁺OH⁻. For the application of Hg²⁺ detection in the environmental field, the MSIR-coated glass plate is also developed and exhibits an excellent function in visual and fluorescence changes with Hg²⁺ ion.     

Structural and thermosensitive properties of novel octopus shape cyclotriphosphazenes

Three novel compounds (3–5) were synthesized from the reactions of non-geminal cis-2,4,6 diethylene glycol monobutyl ether substituted cyclotriphosphazene (2a) with ethylamine, hexylamine and dodecylamine. Compounds 3–5 were characterized by ³¹P NMR, MS and elemental analysis. The thermosensitive properties of compounds 3–5 were investigated. Compound 3 showed thermosensitive properties which might enable it to be used as a biomedical material.     

A ratiometric fluorescent chemosensor for Al in aqueous solution based on aggregation-induced emission and its application in live-cell imaging

A ratiometric fluorescent chemosensor 1 was developed for the detection of Al³⁺ in aqueous solution based on aggregation-induced emmision (AIE). The chemosensor showed the fluorescence of its aggregated state and Al³⁺-chelated soluble state in the absence and in the presence of Al³⁺, respectively, and resulted in a fluorescence ratio (I₄₆₁/I₅₃₇) response to Al³⁺ in neutral aqueous solution at a detection limit as low as 0.29 μmol L⁻¹. The method was also highly selective to Al³⁺ over other physiological relevant metal ions investigated in this study. Taking advantage of its AIE characteristics, the chemosensor was successfully applied on test papers for simple and rapid detection of Al³⁺. Moreover, the application of 1 for the imaging of Al³⁺ in living cells by ratiometric fluorescence changes was also achieved.     

Salicylaldehyde hydrazones as fluorescent probes for zinc ion in aqueous solution of physiological pH

Salicylaldehyde hydrazones of 1 and 2 were synthesized and their potential as fluorescent probes for zinc ion was investigated in this paper. Both of the probes were found to show fluorescence change upon binding with Zn²⁺ in aqueous solutions, with good selectivity to Zn²⁺ over other metal ions such as alkali/alkali earth metal ions and heavy metal ions of Pb²⁺, Cd²⁺ and Hg²⁺. They showed 1:2 metal-to-ligand ratio when their Zn²⁺ complex was formed. By introducing pyrene as fluorophore, 2 showed interesting ratiometric response to Zn²⁺. Under optimal condition, 2 exhibited a linear range of 0-5.0 μM and detection limit of 0.08 μM Zn²⁺ in aqueous buffer, respectively. The detection of Zn²⁺ in drinking water samples using 2 as fluorescent probe was successful.