共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
基于Volterra频域核辨识的非线性模拟电路故障诊断 总被引:3,自引:2,他引:1
基于Volterra级数时域频域混合模型,提出了辨识非线性模拟电路频域核的故障诊断方法.利用混合模型辨识算法和范德蒙特法估计各种故障状态下电路响应的前3阶频域核,提取故障特征并与相应的故障模式一起构成特征样本集,借助于支持向量机多分类器进行分类识别,实现非线性模拟电路的故障诊断.阐述了诊断原理及诊断步骤,并给出了诊断实例.仿真结果表明,该方法的故障识别率较高,便于计算机计算. 相似文献
4.
文章介绍了开放空间长阵列红外线扫描定位系统的构成和工作原理,详细阐述了该系统中电子移位逐行扫描电路的设计、强日光红外线干扰处理和红外模块故障检测的实现,并给出了系统软件设计。该系统采用电子移位逐行高速扫描技术、系统故障自动检测技术和多种抗室外强日光红外线干扰措施,判别系统红外模块的故障位置和故障类型,实现了快速、精确定位,提高了系统的抗干扰能力以及定位的稳定性、可靠性和可维护性;并利用Delphi开发系统主控软件,完成定位结果的显示、输出、工作参数设置和状态检测等功能。该系统在实际工程中得到应用,效果良好。 相似文献
5.
分布电容是多次级高压变压器固有的寄生参数,它直接影响电路的工作性能。本文从分布电容的产生机理出发,通过传统绕制和PCB迭绕两种工艺的比较,最后以实测波形来说明了分布电容对电路性能的影响。 相似文献
6.
小波变换在微机继电保护中的仿真研究 总被引:2,自引:0,他引:2
根据小波分析的基本理论 ,结合系统发生故障短路时故障相电流的波形特征 ,介绍了利用小波分解、重构后的高频分量突变点来检测是否发生故障。通过仿真分析表明 :该方法是有效的 ,并给出了基于文献 [1]算法的微机保护电路构成示意图。最后 ,分析了故障信号的消噪方法 相似文献
7.
8.
电容器是一种常用的电子元件,不管是独立导体,还是多个导体组成的系统,都可构成电容器,对于多个导体组成的系统来说,它们所构成的电容可分为自部分电容和互部分电容,这些电容在有的电路中可以看成是分布电容。变压器是一个多导体系统特例,它是由铁芯(磁芯)、绕组、屏蔽层(接地)等导体构成,该系统所形成的分布电容对有的电路影响非常大,因此为了讨论该问题,本文从导体系统电容出发,系统地阐述变压器分布电容的形成、危害及克服办法。 相似文献
9.
10.
如果单机采用了固态继电器的自保持电路,当传输电缆过长时,其分布电容可能会造成电路误动作,文中结合实例分析了电缆分布电容对固态继电器自保持电路的影响,并提出了改进办法。 相似文献
11.
介绍如何使用数据库技术来处理电路图问题。即将电路图中的每一个元器件的名称、位置、大小和使用图片等属性保存在数据库表的一条记录里,对每个元器件的修改其实就是修改数据库里对应记录的内容,这样电路图中的元器件都能以分离元件的形式分别进行移动、删除和保存。程序结果表明,使用数据库技术来处理电路图,可以很方便地对各个元器件进行调整,而且保存后,以后还可以任意调整。 相似文献
12.
13.
14.
We present a method of automatically generating circuit designs using evolutionary search and a set of circuit constructing primitives arranged in a linear sequence. This representation has the desirable property that virtually all sets of circuit-constructing primitives result in valid circuit graphs. While this representation excludes certain circuit topologies, it is capable of generating a rich set of them including many of the useful topologies seen in hand-designed circuits. Our system allows circuit size (number of devices), circuit topology, and device values to he evolved. Using a parallel genetic algorithm and circuit simulation software, we present experimental results as applied to three analog filter and two amplifier design tasks. In all tasks, our system is able to generate circuits that achieve the target specifications. Although the evolved circuits exist as software models, detailed examinations of each suggest that they are electrically well behaved and thus suitable for physical implementation. The modest computational requirements suggest that the ability to evolve complex analog circuit representations in software is becoming more approachable on a single engineering workstation 相似文献
15.
对于开关电源来说,场效应管(MOS管)是最为重要的零部件之一。在充分阐述PFC电路、MOS管的基本原理的基础上,分析电路振荡原理的基本概况,可以明确MOS管振荡造成损坏的根本原因。 相似文献
16.
根据看门狗电路的原理,设计出简单适用、性能可靠的TTL型看门狗电路以及价格低廉、性能可靠的微功耗CMOS型看门狗电路,同时还介绍了常用的uP监视器0型看门狗电路。 相似文献
17.
18.
19.
The circuit constraint is used to constrain a graph represented by a successor for each node, such that the resulting edges form a circuit. Circuit and its variants are important for various kinds of tour-finding, path-finding and graph problems. In this paper we examine how to integrate the circuit constraint, and its variants, into a lazy clause generation solver. To do so we must extend the constraint to explain its propagation. We consider various propagation algorithms for circuit and examine how best to explain each of them. We compare the effectiveness of each propagation algorithm once we use explanation, since adding explanation changes the trade-off between propagation complexity and power. Simpler propagators, although less powerful, may produce more reusable explanations. Even though the most powerful propagator considered for circuit and variants creates huge explanations, we find that explanation is highly advantageous for solving problems involving this kind of constraint. 相似文献
20.
以异步电路的基本类型为基础,依据异步控制电路的基本描述机制将已有的异步电路设计方法划分为基于CSP的设计方法、基于Petri网的设计方法以及基于有限状态机的设计方法3类,并对这3类设计方法的优缺点进行比较;针对已有的逻辑综合实现技术与直接映射实现技术的优势与不足,提出了异步控制电路设计方法的发展趋势. 相似文献