Experimental investigations of polypropylene and poly(vinyl chloride) composites filled with plerospheres

Plerospheres, defined here as superfine spherical particles (0.5–5 μm) separated from fly ash (rather than as other solid spherical particles, as some have used the term), are separated from coal fly ash but are dramatically different from it. Plerospheres can be used as polymer fillers to improve the properties of composites. With plerospheres used as fillers for polypropylene (PP) and unplasticized poly(vinyl chloride) (UPVC), the effects of the filler content, the particle sizes of the plerospheres, and the coupling agent on the composite properties were studied. The particle sizes of the plerospheres were 2 and 5 μm. The results suggested that the notched impact properties both at a normal temperature and a low temperature and the tensile and flexural properties of plerosphere/PP increased significantly when the content was increased from 0 to 30 wt % and further increased with the addition of a coupling agent. Differential scanning calorimetry indicated that the thermal properties of the plerosphere/PP composite improved. The surface characteristics and morphology of the impact fracture surface were examined in detail with scanning electron microscopy. The rheological performance of plerosphere/UPVC pipe composites obviously improved; the plasticizing time was shortened, and the maximum torque was reduced. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 126–131, 2004     

Preparation and application of triglyceride plasticizers for poly(vinyl chloride)

A series of triglyceride plasticizers were prepared from glycerol, acetic acid, and benzoic acid through a two‐step reaction to develop potential uses of glycerol. The optimum reaction conditions were determined by the esterification of glycerol and acetic acid to produce glyceryl triacetate. When the molar ratio of glycerol to benzoic acid to acetic acid was 1:1:3.5, a novel plasticizer triglyceride mixture (GTM) was successfully synthesized; it had a good plasticizing effect on poly(vinyl chloride) (PVC). The elongation at break of PVC composites containing 80 phr GTM increased around 350%; the corresponding hardness (Shore D) and tensile strength decreased to around 35 D and 20 MPa, respectively. Moreover, the glass‐transition temperature (T_g) of PVC composites containing 40 phr GTM decreased to around 50°C. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of poly(vinyl chloride)–continuous carbon fiber composites

In this article, we report on the preparation and characterization of novel poly(vinyl chloride) (PVC)–carbon fiber (CF) composites. We achieved the reinforcement of PVC matrices with different plasticizer contents using unidirectional continuous CFs by applying a warm press and a cylinder press for the preparation of the PVC–CF composites. We achieved considerable reinforcement of PVC even at a relatively low CF content; for example, the maximum stress (σ_max) of the PVC–CF composite at a 3% CF content was found to be 1.5–2 times higher than that of the PVC matrix. There were great differences among the Young's modulus values of the pure PVC and PVC–CF composites matrices. The absolute Young's modulus values were in the range 1100–1300 MPa at a 3% CF content; these values were almost independent of the plasticizer content. In addition, we found a linear relationship between σ_max and the CF content and also recognized a linear variation of the Young's modulus with the CF content. The adhesion of CF to the PVC matrix was strong in each case, as concluded from the strain–stress curves and the light microscopy and scanning electron microscopy investigations. The mechanical properties of the PVC–CF composites with randomly oriented short (10 mm) fibers were also investigated. At low deformations, the stiffness of the composites improved with increasing CF content. Dynamic mechanical analysis (DMA) was used to determine the glass‐transition temperature (T_g) of the PVC–CF composites. The high increase in the Young's modulus entailed only a mild T_g increase. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A new biobased plasticizer for poly(vinyl chloride) based on epoxidized cottonseed oil

The use of epoxidized cottonseed oil as plasticizer for poly(vinyl chloride) was studied. The plasticizer content was set to 70 phr and the optimum isothermal curing conditions were studied in the temperature range comprised between 160 and 220 °C with varying curing times in the 7.5–17.5 min range. The influence of the curing conditions on overall performance of cured plastisols was followed by the evolution of mechanical properties (tensile tests with measurements of tensile strength, elongation at break, and modulus), change in color, surface changes of fractured samples by scanning electron microscopy (SEM), thermal transitions by differential scanning calorimetry, and migration in n‐hexane. The optimum mechanical features of cured plastisols are obtained for curing temperatures in the 190–220 °C range. For these curing conditions, fractography analysis by SEM gives evidences of full curing process as no PVC particles and free plasticizer can be found. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43642.     

Biodegradable antistatic plasticizer based on citrate electrolyte doped with alkali metal salt and its poly(vinyl chloride) composites

An eco‐friendly citrate electrolyte‐based antistatic plasticizer (CEAP) consisting of sodium thiocyanate‐doped tris(2‐butoxyethyl) citrate was successfully synthesized using a typical esterification reaction between citric acid and 2‐butoxyethanol. Poly(vinyl chloride) (PVC)/CEAP composites were then prepared in a Haake torque rheometer. Fourier transform infrared spectroscopy was used to confirm both the structure of the synthesized CEAP and the coordination effects between the doping salt and CEAP. The dependence of the conductivity of the synthesized CEAP on temperature and concentration of the doping salt was investigated. The surface resistivity and mechanical properties of the PVC/CEAP composites were also studied. The results showed that the surface resistivity of the PVC/CEAP composites could be effectively reduced to the order of 10⁷Ω sq^?1 when the CEAP content reached 80 phr. The surface resistivity of the composites still reached 10⁸Ω sq^?1 even at a relative humidity of 12%, showing an excellent electrostatic discharge (ESD) capacity. The fabricated composites with good ESD capacity also had a tensile strength of 10 MPa and an elongation at break of 400%, which could satisfy requirements for packaging applications or similar usages. Copyright © 2010 Society of Chemical Industry     

The influence of poly(vinyl alcohol) suspending agents on suspension poly(vinyl chloride) morphology

The requirements for PVC suspension resin have changed considerably in the last few years, so much so that few companies have products on their ranges that are more than 4 or 5 years old. The suspending agent has a crucial influence on the morphology of the resin, so the changes in resin characteristics have largely been achieved by changes in the suspending agent systems. After a brief review of the mechanism of PVC suspension polymerisation, the properties of polymers made using PVOH suspending agents are related to changes in the latter. The effect of variations in PVAc degree of hydrolysis and viscosity are related to changes in surface tension. Methods of achieving higher porosity by using low hydrolysis co-suspending agents are described. It is shown that higher bulk densities can be achieved by delayed addition of the PVOH. Levels of conjugated unsaturation and copolymer distributions are also shown to have important influences.     

The molecular, physical and mechanical properties of highly plasticized poly(vinyl chloride) membranes

Highly plasticized poly(vinyl chloride) membranes (200 parts per hundred resin, phr) form the basis of ion-selective electrodes. The effects that five different plasticizers with different chemical structures, polarities and molecular weights have on modified mechanical properties such as strength, secant stiffness, toughness and ductility were examined by puncture testing. As a function of membrane thickness, strength, toughness, and secant stiffness increase, while ductility remains constant. For maximal membrane strength and toughness, plasticizer should be roughly 1000. The optimal ratio of experimental plasticization level (phr_exp = 200) to the minimal level required for complete plasticization (phr_min) was found to be 2. A ‘tube’-like model for plasticizer interaction with polymer chains is proposed to explain the vast differences in the mechanical properties of membranes.     

Diester based on castor oil fatty acid as plasticizer for poly(vinyl chloride)

Castor oil is a renewable resource that has potential uses as an environmental friendly material for a range of applications. In recent years, much efforts have been driven to develop alternate plasticizer for medical and commodity plastics due to growing concerns about dioctyl phthalate (DOP) for flexible poly(vinyl chloride) (PVC). In this study, a bio‐based plasticizer was synthesized by a two‐step esterification reaction of castor oil fatty acid (COFA) with benzyl alcohol and octanoic acid in the presence of catalyst (dibutyl tin dilaurate). The structure of the octanoic ester (OE) was confirmed by proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, acid value, and hydroxyl value. OE was used as a coplasticizer in PVC for partial replacement of DOP. The addition of OE exhibited good incorporation and plasticizing performance in the PVC sheets. Incorporation of OE resulted in good plasticizing, tensile strength, percentage elongation, exudation, thermal stability, and chemical resistance because of the presence of long carbon chains of COFA. Differential scanning calorimetry (DSC), thermogravimetric analysis, and color measurements were also performed to evaluate the effect of OE. With the increase in OE, DSC and hardness results showed marginal deviation from those obtained for DOP‐plasticized sheets. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40354.     

Metallic oxides as fire retardants and smoke suppressants in flexible poly(vinyl chloride)

Combustion and smoke emission properties of PVC compounds, modified with copper (II), molybdenum, and zinc oxides, were studied using cone calorimeter, limiting oxygen index (LOI) and thermogravimetry coupled with mass spectrometry (TG/MS). Results showed that the metal oxides have a very significant effect on the combustion and smoke suppression properties of the PVC compounds. The results also confirmed the anticipation mechanisms of the dehydrochlorination reactions, reductive coupling, and elimination of benzene resulting from the presence of copper (II), molybdenum, and zinc, indicated by the increasing content of postcombustion char residue and the significant reduction in benzene production, indicated by the MS measurements performed. The results also provide indications that the combination of the copper (II) and molybdenum oxides is the one with the best balance of combustion properties, as it reduced the heat released and promoted the suppression of smoke more efficiently. The formulations containing ZnO, because of their strong Lewis acid character, indicated a less pronounced reduction of smoke released during the combustion process, when compared with copper (II) and molybdenum oxides. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and application of a natural plasticizer based on cardanol for poly(vinyl chloride)

A natural plasticizer with multifunctional groups, similar in structure to phthalates, cardanol derivatives glycidyl ether (CGE) was synthesized from cardanol by a two‐step modification process and characterized by FT‐IR, ¹HNMR, and ¹³CNMR. The resulting product was incorporated to PVC (CGE/PVC), and plasticizing effect was compared with PVC incorporated with two kinds of commercial phthalate ester plasticizers bis (2‐ethylhexyl) benzene‐1,4‐dicarboxylate (DOTP) and diisononyl phthalate (DINP). Dynamic mechanical analysis and mechanical properties testing of the plasticized PVC samples were performed in order to evaluate their flexibility, compatibility, and plasticizing efficiency. SEM was employed to produce fractured surface morphology. Thermogravimetric analysis and discoloration tests were used to characterize the thermal stabilities. Dynamic stability analysis was used to test the processability of formulations. Compared with DOTP and DINP plasticized samples, CGE/PVC has a maximum decrease of 9.27% in glass transition temperature (T_g), a maximum increase of 17.6% in the elongation at break, and a maximum increase of 31.59°C and 25.31 min in 50% weight loss (T50) and dynamic stability time, respectively. The obtained CGE also has slightly lower volatility resistance and higher exudation resistance than that of DOTP and DINP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42465.     

Blends of plasticized poly(vinyl chloride) and waste flexible poly(vinyl chloride) with waste nitrile rubber powder

Blends of poly(vinyl chloride) (PVC) with varying contents of plasticizer and finely ground powder of waste nitrile rubber rollers were prepared over a wide range of rubber contents through high‐temperature blending. The effects of rubber and plasticizer (dioctyl phthalate) content on the tensile strength, percentage elongation, impact properties, hardness, abrasion resistance, flexural crack resistance, limiting oxygen index (LOI), electrical properties, and breakdown voltage were studied. The percentage elongation, flexural crack resistance, and impact strength of blends increased considerably over those of PVC. The waste rubber had a plasticizing effect. Blends of waste plasticized PVC and waste nitrile rubber showed promising properties. The electrical properties and LOI decreased with increasing rubber and plasticizer content. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1552–1558, 2004     

Soiling of plasticized poly(vinyl chloride)

The effects of three plasticizers and two plasticizer concentrations on the topography and soiling of poly (vinyl chloride) (PVC) were studied. Palmitic acid and triolein were chosen to represent solid and liquid soils. The feasibility of using infrared spectroscopy to quantify the amount of soil on PVC was examined. The structure of the solid model soil on plasticized PVC was studied with optical microscopy and atomic force microscopy. Palmitic acid formed two different structures on the PVC surface. Both the type and concentration of the plasticizer influenced the structure of the oily soil on plasticized PVC. The wetting of plasticized PVC with the liquid oily soil was compared to wetting with water through the measurement of the contact angles. Plasticized PVC was hydrophobic and oleophilic. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Networks of photocrosslinked poly(meth)acrylates in linear poly(vinyl chloride)

Five different multifunctional acrylic monomers (trimethylolpropane triacrylate, trimethylolpropane trimethacrylate, pentaerythritol triacrylate, pentaerythritol tetraacrylate, and dipentaerythritol pentaacrylate) were photopolymerized alone or in a matrix of linear poly(vinyl chloride) (PVC) with 2,2‐dimethyl‐2‐hydroxyacetophenone as a photoinitiator. The course of photopolymerization was estimated with Fourier transform infrared spectroscopy. The amount of insoluble gel formed during photopolymerization was determined gravimetrically. The crosslinked polymerization of pure monomers was much faster than that in the presence of PVC. However, the efficiency of the reaction was higher when it was carried out in a PVC blend because of the higher mobility of the propagating macroradicals. The influence of the monomer structure and functionality on the polymerization course was examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3725–3734, 2002     

Yttrium fumaropimarat as a novel heat stabilizer for poly(vinyl chloride)

Yttrium fumaropimarat (YFPA) was synthesized with fumaropimaric acid and yttrium acetate as raw materials. The structure of the product was analyzed and characterized by Fourier transform infrared spectrometer, scanning electron microscope, energy dispersive X‐ray microanalysis, and X‐ray diffraction. The results showed that the product was amorphous state, three‐dimensional reticulation compound by the ionic bond of COO^? and Y³⁺. The effect of YFPA on poly(vinyl chloride) (PVC) thermal stability was researched by means of Congo red method and heat oven aging method. The experimental results showed that YFPA was a good long‐term PVC thermal stabilizer and could greatly improve PVC thermal stability and initial stage stainability mixing calcium stearate, zinc stearate, and pentaerythrite. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45015.     

Optical properties of poly(vinyl chloride)-gel-based microlens arrays

We use a poly(vinyl chloride) (PVC) gel and an electrode to fabricate adaptive microlens arrays (MLAs). The electrode has a zoned-array pattern. By applying a direct current voltage to the electrode, the PVC gel on each zoned electrode exhibited the character of a lens. The imaging of the MLA can be analyzed using either an optical microscope or a beam profiler or both. The topography of the PVC gel can be measured using an optical surface profiler. Compared to the imaging and focusing, the topographic map can discover additional information about the performances of the MLA. For example, the focal length of each lens in the MLA can be calculated precisely, and the aberration of the MLA can also be evaluated. Results show that the surface profile is an important factor for characterizing the performance of PVC-gel-based MLA. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47407.     

Succinate-based plasticizers: Effect of plasticizer structure on the mechanical and thermal performance of poly(vinyl chloride) plastic formulations

A new family of succinate-based plasticizers, consisting of molecules with a linear alkyl chain capped with n-alkyl succinates on both ends, was evaluated as potential bio-based plasticizers for stiff polymers. The influence of the central and side alkyl chain lengths on the mechanical and thermal properties as well as the migration behavior of poly(vinyl chloride) (PVC)/plasticizer blends was evaluated. The central chain length had the greatest influence on plasticizer performance, with shorter chains leading to blends with higher stress at break and surface hardness, whereas long chains produced softer blends. An optimum chain central length of five carbon atoms was observed, with longer chains leading to reduced compatibility and exudation of the plasticizer at higher plasticizer concentrations. The entire family of plasticizers performed comparably or better than the commercial plasticizer di(2-ethylhexyl) phthalate (DEHP) when incorporated into the blend at concentrations of 20–60 parts per hundred resin (phr). Overall, the succinate-based plasticizers/PVC blends all exhibited equal or improved tensile properties (by up to 77%), surface hardness (reduced by up to 43%), glass transition temperature (reduced by up to 11°C), and migration into organic media (reduced by up to 38%) when compared with blends with DEHP at 40 phr.     

Preparation of cardanol based epoxy plasticizer by click chemistry and its action on poly(vinyl chloride)

In recent years, the using of reproducible resource and economical and efficient synthesis method has got wide concern. Herein, an environmental‐friendly plasticizer originated from cardanol was synthesized by click chemistry. First, the cardanol sulfide (CS) was obtained by click chemistry reaction between the double bond of the side chain of cardanol and mercaptoethanol. The degree of the click reaction was estimated to reach 84.7% by testing the content of sulfur. Then, the epoxidation of the hydroxyl was performed to get cardanol based epoxy plasticizer (CEP) in the presence of epichlorohydrin. The epoxy value was 0.32. The structure of CS and CEP was confirmed by FT‐IR and NMR techniques. A Haake torque rheometer was used to research the action of CEP on polyvinyl chloride (PVC). Results showed that it possessed favorable plasticization effect and stabilization effect on PVC. CEP had good heat stabilization in PVC, and could decrease the T_g of PVC significantly. Moreover, CEP could increase the tensile strength of PVC when in a small amount, and could increase the plasticity of PVC when in a larger quantity significantly. The characteristics of volatile, migration and solvent extraction of PVC plasticized by CEP is similar to by dioctyl phthalate (DOP). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44890.     

Influences of individual and composed poly(vinyl alcohol) suspending agents on particle morphology of suspension poly(vinyl chloride) resin

Effects of individual and composed poly(vinyl alcohol) (PVA) suspending agents on the particle morphology of poly(vinyl chloride) (PVC) resins were investigated and discussed in the view of PVA absorption at the oil/water interface and interfacial behavior. It was shown that the percentage and surface coverage of PVA at the oil/water interface decreased with the increase of the degree of hydrolysis (DH) of PVA in the DH range of 70–98 mol %, while the interfacial tension of VC/PVA aqueous solution increased linearly with the increase of DH of PVA. PVC resin with more regular particle shape, increased agglomeration and fusion of primary particles, lower porosity and higher bulk density, was prepared by using PVA with a higher DH as a suspending agent. This was caused by the occurrence of drop coalescence at the very early stage of VC polymerization, the increase of particle shrinkage, and the lower colloidal protection to primary particles. It was also shown that the interfacial tension of VC/water in the presence of composed PVA suspending agents varied linearly with the weight composition of the composed PVA suspending agents. The particle properties of PVC resin prepared by using the composed PVC suspending agents were usually situated in between the properties of PVC resins prepared by using the corresponding individual PVA suspending agent. The particle morphology and properties of PVC resin could be controlled by the suitable choice of the composed PVA suspending agents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3848–3855, 2003     

Mechanochemical preparation of a novel polymeric photostabilizer for poly(vinyl chloride)

The preparation of a novel polymeric photostabilizer was carried out via the vibromilling of poly(vinyl chloride) (PVC) powder, a reactive light stabilizer (r‐LS), and a peroxide initiator in ball‐containing jars with a planetary ball mill for a certain time. The effects of the initiator content, milling time, and temperature on the grafting ratio were studied with gravimetric analysis and intrinsic viscosity measurements. Fourier transform infrared and ultraviolet–visible spectra were used to investigate the structural development of the mixture of the r‐LS and PVC during vibromilling. The results showed that the r‐LS was grafted onto PVC chains successfully, and the aforementioned factors had a significant effect on the grafting ratio. The optimum preparation conditions were 0.5 wt % initiator, 8 h, and 20°C. A grafting mechanism is proposed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010