共查询到20条相似文献,搜索用时 296 毫秒
1.
某型民用运输类飞机采用了尾吊发动机和高平尾的气动布局,使得飞机存在深失速的可能性。为了使飞机的失速特性能够满足适航标准的规定,研制了以推杆器为核心的失速保护系统。在推杆器的研制试飞过程中,发现飞机在巡航构型下,推杆器被激发工作后,飞机改出失速的过程中出现了负过载,这是适航条例所不能接受的。分析了飞机在失速试飞过程中负过载出现的原因,通过调整推杆器工作逻辑和设计飞行试验,找出飞机在巡航构型下的最佳推杆器工作行程,既满足飞机失速改出过程中不出现负过载的适航要求,又使得推杆器有足够能力帮助飞机改出失速状态。对更改后的推杆器工作逻辑进行飞行试验验证,试验结果表明,失速改出过程中的负过载问题得到了完善的解决。 相似文献
2.
飞机在极端气候环境中飞行时,往往会引起飞机燃油系统结冰,使系统给发动机所供的燃油流量间歇中断或完全中断,从而导致飞行事故。因此,在当前新机研制中,对燃油系统的结冰问题加以重点考虑,并且不仅要在实验室对系统进行燃油结冰模拟试验,而且在型号试飞阶段也要模拟极端气候条件进行燃油系统结冰飞行试验,以便考核该条件下燃油系统供油能力和发动机工作可靠性。本文结合某型飞机燃油系统结冰试验技术攻关工作,研究飞机燃油系统结冰飞行试验的燃油配水方法和试验程序。 相似文献
3.
4.
5.
6.
7.
8.
9.
民用飞机货舱烟雾探测系统适航验证与试飞 总被引:1,自引:0,他引:1
为验证民用飞机货舱烟雾探测系统满足CCAR25.858(a)、(c)、(d)条款的要求,需进行地面验证试验(MOC5)和飞行验证试验(MOC6),以证明货舱烟雾探测系统能够在起火后1min内,向飞行机组给出目视指示。在介绍货舱烟雾探测系统适航条款要求的基础上,给出了货舱烟雾探测系统试飞测试技术、试飞方法和试验结果可接受判据,为CCAR25.858(a)、(c)、(d)条款的地面和飞行验证试验提供了有效途径,对飞机型号合格审定中有关货舱烟雾探测系统验证试验工作提供借鉴。 相似文献
10.
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
14.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
15.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
16.
17.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
18.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
19.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
20.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献