Quick and simple: quality control of microarray data

MOTIVATION: Microarrays are high-throughput tools for parallel miniaturized detection of biomolecules. In contrast to experiments using ratios of signals in two channels, experiments with only one fluorescent dye cause special problems for data analysis. The present work compares algorithms for quality filtering on spot level as well as array/slide level. RESULTS: Methods for quantitative spot filtering are discussed and new sets of quality scores for data preprocessing are designed. As measures of spot quality also reflect the quality of protocols, they were employed to find the optimal print buffer in an optimization experiment. In order to determine problematic arrays within a set of replicates we tested methods of outlier detection which can suitably replace the visual inspection of slides. CONTACT: Ursula.Sauer@arcs.ac.at.     

Quantitative quality control in microarray image processing and data acquisition

A new integrated image analysis package with quantitative quality control schemes is described for cDNA microarray technology. The package employs an iterative algorithm that utilizes both intensity characteristics and spatial information of the spots on a microarray image for signal–background segmentation and defines five quality scores for each spot to record irregularities in spot intensity, size and background noise levels. A composite score q_com is defined based on these individual scores to give an overall assessment of spot quality. Using q_com we demonstrate that the inherent variability in intensity ratio measurements is closely correlated with spot quality, namely spots with higher quality give less variable measurements and vice versa. In addition, gauging data by q_com can improve data reliability dramatically and efficiently. We further show that the variability in ratio measurements drops exponentially with increasing q_com and, for the majority of spots at the high quality end, this improvement is mainly due to an improvement in correlation between the two dyes. Based on these studies, we discuss the potential of quantitative quality control for microarray data and the possibility of filtering and normalizing microarray data using a quality metrics-dependent scheme.     

PHOENIX, a web interface for (re)analysis of microarray data

Microarrays are tools to study the expression profile of an entire genome. Technology, statistical tools and biological knowledge in general have evolved over the past ten years and it is now possible to improve analysis of previous datasets. We have developed a web interface called PHOENIX that automates the analysis of microarray data from preprocessing to the evaluation of significance through manual or automated parameterization. At each analytical step, several methods are possible for (re)analysis of data. PHOENIX evaluates a consensus score from several methods and thus determines the performance level of the best methods (even if the best performing method is not known). With an estimate of the true gene list, PHOENIX can evaluate the performance of methods or compare the results with other experiments. Each method used for differential expression analysis and performance evaluation has been implemented in the PEGASE back-end package, along with additional tools to further improve PHOENIX. Future developments will involve the addition of steps (CDF selection, geneset analysis, meta-analysis), methods (PLIER, ANOVA, Limma), benchmarks (spike-in and simulated datasets), and illustration of the results (automatically generated report).     

SpotWhatR: a user-friendly microarray data analysis system

SpotWhatR is a user-friendly microarray data analysis tool that runs under a widely and freely available R statistical language (http://www.r-project.org) for Windows and Linux operational systems. The aim of SpotWhatR is to help the researcher to analyze microarray data by providing basic tools for data visualization, normalization, determination of differentially expressed genes, summarization by Gene Ontology terms, and clustering analysis. SpotWhatR allows researchers who are not familiar with computational programming to choose the most suitable analysis for their microarray dataset. Along with well-known procedures used in microarray data analysis, we have introduced a stand-alone implementation of the HTself method, especially designed to find differentially expressed genes in low-replication contexts. This approach is more compatible with our local reality than the usual statistical methods. We provide several examples derived from the Blastocladiella emersonii and Xylella fastidiosa Microarray Projects. SpotWhatR is freely available at http://blasto.iq.usp.br/~tkoide/SpotWhatR, in English and Portuguese versions. In addition, the user can choose between "single experiment" and "batch processing" versions.     

2HAPI: a microarray data analysis system

SUMMARY: 2HAPI (version 2 of High density Array Pattern Interpreter) is a web-based, publicly-available analytical tool designed to aid researchers in microarray data analysis. 2HAPI includes tools for searching, manipulating, visualizing, and clustering the large sets of data generated by microarray experiments. Other features include association of genes with NCBI information and linkage to external data resources. Unique to 2HAPI is the ability to retrieve upstream sequences of co-regulated genes for promoter analysis using MEME (Multiple Expectation-maximization for Motif Elicitation) AVAILABILITY: 2HAPI is freely available at http://array.sdsc.edu. Users can try 2HAPI anonymously with pre-loaded data or they can register as a 2HAPI user and upload their data.     

Protocols for the assurance of microarray data quality and process control

Microarrays represent a powerful technology that provides the ability to simultaneously measure the expression of thousands of genes. However, it is a multi-step process with numerous potential sources of variation that can compromise data analysis and interpretation if left uncontrolled, necessitating the development of quality control protocols to ensure assay consistency and high-quality data. In response to emerging standards, such as the minimum information about a microarray experiment standard, tools are required to ascertain the quality and reproducibility of results within and across studies. To this end, an intralaboratory quality control protocol for two color, spotted microarrays was developed using cDNA microarrays from in vivo and in vitro dose-response and time-course studies. The protocol combines: (i) diagnostic plots monitoring the degree of feature saturation, global feature and background intensities, and feature misalignments with (ii) plots monitoring the intensity distributions within arrays with (iii) a support vector machine (SVM) model. The protocol is applicable to any laboratory with sufficient datasets to establish historical high- and low-quality data.     

AMADA: analysis of microarray data

SUMMARY: AMADA is a Windows program for identifying co-expressed genes from microarray data. It performs data transformation, principal component analysis, a variety of cluster analyses and extensive graphic functions for visualizing expression profiles.     

Empirical array quality weights in the analysis of microarray data

Background  

Assessment of array quality is an essential step in the analysis of data from microarray experiments. Once detected, less reliable arrays are typically excluded or "filtered" from further analysis to avoid misleading results.     

Statistical analysis of microarray data: a Bayesian approach

The potential of microarray data is enormous. It allows us to monitor the expression of thousands of genes simultaneously. A common task with microarray is to determine which genes are differentially expressed between two samples obtained under two different conditions. Recently, several statistical methods have been proposed to perform such a task when there are replicate samples under each condition. Two major problems arise with microarray data. The first one is that the number of replicates is very small (usually 2-10), leading to noisy point estimates. As a consequence, traditional statistics that are based on the means and standard deviations, e.g. t-statistic, are not suitable. The second problem is that the number of genes is usually very large (approximately 10,000), and one is faced with an extreme multiple testing problem. Most multiple testing adjustments are relatively conservative, especially when the number of replicates is small. In this paper we present an empirical Bayes analysis that handles both problems very well. Using different parametrizations, we develop four statistics that can be used to test hypotheses about the means and/or variances of the gene expression levels in both one- and two-sample problems. The methods are illustrated using experimental data with prior knowledge. In addition, we present the result of a simulation comparing our methods to well-known statistics and multiple testing adjustments.     

MASQOT: a method for cDNA microarray spot quality control

Background  

cDNA microarray technology has emerged as a major player in the parallel detection of biomolecules, but still suffers from fundamental technical problems. Identifying and removing unreliable data is crucial to prevent the risk of receiving illusive analysis results. Visual assessment of spot quality is still a common procedure, despite the time-consuming work of manually inspecting spots in the range of hundreds of thousands or more.     

BioArray Software Environment (BASE): a platform for comprehensive management and analysis of microarray data

The microarray technique requires the organization and analysis of vast amounts of data. These data include information about the samples hybridized, the hybridization images and their extracted data matrices, and information about the physical array, the features and reporter molecules. We present a web-based customizable bioinformatics solution called BioArray Software Environment (BASE) for the management and analysis of all areas of microarray experimentation. All software necessary to run a local server is freely available.     

THEA: ontology-driven analysis of microarray data

MOTIVATION: Microarray technology makes it possible to measure thousands of variables and to compare their values under hundreds of conditions. Once microarray data are quantified, normalized and classified, the analysis phase is essentially a manual and subjective task based on visual inspection of classes in the light of the vast amount of information available. Currently, data interpretation clearly constitutes the bottleneck of such analyses and there is an obvious need for tools able to fill the gap between data processed with mathematical methods and existing biological knowledge. RESULTS: THEA (Tools for High-throughput Experiments Analysis) is an integrated information processing system allowing convenient handling of data. It allows to automatically annotate data issued from classification systems with selected biological information coming from a knowledge base and to either manually search and browse through these annotations or automatically generate meaningful generalizations according to statistical criteria (data mining). AVAILABILITY: The software is available on the website http://thea.unice.fr/     

Reproducible and reliable microarray results through quality control: good laboratory proficiency and appropriate data analysis practices are essential

Over a few short years, microarray gene expression profiling has permeated most areas of biomedical research. Microarrays are now poised to enter the more demanding realm of clinical applications. The prospect of using microarray data to derive biomarkers of disease or toxicity, predict prognosis, or select treatments raises the validity and reliability bar substantially higher. The potential future payoffs are huge in terms of faster approval of more efficacious and safer medical interventions, and a more personalized implementation of them. Arriving at the future sooner rather than later is the motivation for the FDA-led MicroArray Quality Control (MAQC) project. The widespread collaboration aims to assess achievable technical performance of microarrays and capabilities and limitations of methods for microarray data analysis.     

Prediction of clinical outcome with microarray data: a partial least squares discriminant analysis (PLS-DA) approach

Partial least squares discriminant analysis (PLS-DA) is a partial least squares regression of a set Y of binary variables describing the categories of a categorical variable on a set X of predictor variables. It is a compromise between the usual discriminant analysis and a discriminant analysis on the significant principal components of the predictor variables. This technique is specially suited to deal with a much larger number of predictors than observations and with multicollineality, two of the main problems encountered when analysing microarray expression data. We explore the performance of PLS-DA with published data from breast cancer (Perou et al. 2000). Several such analyses were carried out: (1) before vs after chemotherapy treatment, (2) estrogen receptor positive vs negative tumours, and (3) tumour classification. We found that the performance of PLS-DA was extremely satisfactory in all cases and that the discriminant cDNA clones often had a sound biological interpretation. We conclude that PLS-DA is a powerful yet simple tool for analysing microarray data.     

Computational analysis of microarray data

Microarray experiments are providing unprecedented quantities of genome-wide data on gene-expression patterns. Although this technique has been enthusiastically developed and applied in many biological contexts, the management and analysis of the millions of data points that result from these experiments has received less attention. Sophisticated computational tools are available, but the methods that are used to analyse the data can have a profound influence on the interpretation of the results. A basic understanding of these computational tools is therefore required for optimal experimental design and meaningful data analysis.     

Between-group analysis of microarray data

MOTIVATION: Most supervised classification methods are limited by the requirement for more cases than variables. In microarray data the number of variables (genes) far exceeds the number of cases (arrays), and thus filtering and pre-selection of genes is required. We describe the application of Between Group Analysis (BGA) to the analysis of microarray data. A feature of BGA is that it can be used when the number of variables (genes) exceeds the number of cases (arrays). BGA is based on carrying out an ordination of groups of samples, using a standard method such as Correspondence Analysis (COA), rather than an ordination of the individual microarray samples. As such, it can be viewed as a method of carrying out COA with grouped data. RESULTS: We illustrate the power of the method using two cancer data sets. In both cases, we can quickly and accurately classify test samples from any number of specified a priori groups and identify the genes which characterize these groups. We obtained very high rates of correct classification, as determined by jack-knife or validation experiments with training and test sets. The results are comparable to those from other methods in terms of accuracy but the power and flexibility of BGA make it an especially attractive method for the analysis of microarray cancer data.     

MAGIC Tool: integrated microarray data analysis

Summary: Several programs are now available for analyzing thelarge datasets arising from cDNA microarray experiments. Mostprograms are expensive commercial packages or require expensivethird party software. Some are freely available to academicresearchers, but are limited to one operating system. MicroArrayGenome Imaging and Clustering Tool (MAGIC Tool) is an open sourceprogram that works on all major platforms, and takes users ‘fromtiff to gif’. Several unique features of MAGIC Tool areparticularly useful for research and teaching. Availability: http://www.bio.davidson.edu/MAGIC Contact: laheyer{at}davidson.edu     

Use of signal quality measurements to gain efficiency in the analysis of cDNA microarray datacDNA microarray data

This research provides a new way to measure error in microarray data in order to improve gene expression analysis. Microarray data contains many sources of error. In order to glean information about mRNA expression levels, the true signal must first be segregated from noise. This research focuses on the variation that can be captured at the spot level in cDNA microarray images. Variation at other levels, due to differences at the array, dye, and block levels, can be corrected for by a variety of existing normalization procedures. Two signal quality estimates that capture the reliability of each spot printed on a microarray are described. A parametric estimate of within-spot variance, referred to here as σ²_spot, assumes that pixels follow a normal distribution and are spatially correlated. A non-parametric estimate of error, called the mean square prediction error (MSPE), assumes that spots of high quality possess pixels that are similar to their neighbors. This paper will provide a framework to use either spot quality measure in downstream analysis, specifically as weights in regression models. Using these spot quality estimates as weights can result in greater efficiency, in a statistical sense, when modeling microarray data.