Detecting aniline in air in systems based on piezoelectric quartz crystal resonators modified with poly(ethylene glycol succinate) under static and dynamic conditions

The optimal conditions have been found for aniline sorption on a film of poly(ethylene glycol succinate) by the piezoelectric quartz crystal microbalance method using bulk acoustic wave sensors based on AT-cut quartz crystals under static and dynamic conditions. The dependence of the analytical signal of the quartz crystal resonator on the modifier film mass, the volumetric flow rate of the carrier gas (air), and the sorption temperature has been investigated.     

Determination of Acetonitrile in Air Using a Piezoelectric Quartz Crystal Microbalance

The affinity of acetonitrile to different adsorbents used as modifiers of quartz crystal microbalance electrodes was estimated from quantitative sorption parameters. A piezoelectric quartz crystal microbalance with electrodes modified with a squalane solution in hexane was proposed for determining acetonitrile in air at a level of 0.5 MPC. The conditions of the formation of sensitive films (modifier weight and solvent) were optimized, and the interfering effect of alkyl acetates was studied.     

Fast and reversible CO2 quartz crystal microbalance response of vinylimidazolium‐based poly(ionic liquid)s

A series of poly(ionic liquid)s (pILs) based on the 1‐vinyl‐3‐hexylimidazolium polymerizable cation and on the bis(trifluoromethylsulfonyl)imide, nonafluoro‐1‐butanesulfonate, dodecylbenzenesulfonate, heptadecafluorooctanesulfonate, and 4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11‐heptadecafluoroundecanoate anions have been synthesized and characterized. Their sorption/desorption response towards CO₂ has been tested through quartz crystal microbalance investigations. The obtained results show that all of the pILs here reported are featured by peculiar CO₂ sorption properties as they display fast and linear response, reversibility without any memory effect, and reproducibility, suggesting that anion plays a key role in determining sensitivity. Copyright © 2011 John Wiley & Sons, Ltd.     

Porous coordination polymer hybrid device with quartz oscillator: effect of crystal size on sorption kinetics

A new strategy to synthesize monodispersed porous coordination polymer (PCP) nanocrystals at room temperature was developed and utilized for the formation of PCP thin films on gold substrates with fine control over the crystal sizes using the coordination modulation method. Hybridization of these PCP thin films with an environment-controlled quartz crystal microbalance system allowed determining the adsorption properties for organic vapors (methanol and hexane). In the case of high sensitivity (at the low-concentration dosing of analytes), the sensor response depended on the crystal size but not on the type of analyte. In contrast, at the high-concentration dosing, a clear dependence of the sorption kinetics on the analyte was observed due to significant sorbate-sorbate interaction.     

Polymer modification using difluoromethane (HFC 32) and carbon dioxide

The infusion of difluoromethane (HFC 32) and CO₂ into polystyrene and polyethylene has been characterized using a quartz crystal microbalance technique over a range of temperatures and pressures. The results were adequately modeled by Flory‐Huggins theory. Significant plasticization was observed in the polymeric materials and it is shown that manipulation of the experimental temperature, pressure, and rate of depressurisation can cause significant changes in the morphology of the samples. It is demonstrated for the first time how rate constant data for the kinetics of gas sorption can be extracted quickly and easily from in situ quartz crystal microbalance measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1072–1083, 2006     

Sorption and Diffusion of Methanol and Ethanol in Macroporous Sulfonic Resin Amberlyst 15

Theoretical and Experimental Chemistry - The sorption and diffusion of methanol and ethanol on Amberlyst 15 were studied by the quartz crystal microbalance technique in the temperature range of...     

基于压电晶体传感器阵列技术的智能分析仪

自行设计并组装了使多道石英晶体传感器同时起振的高稳定度的振荡电路及其智能分析仪,同时采用准确、简单的计算方式,用单片机系统进行控制,实现了对多道反应的同步监测和显示。该分析仪弥补了单道检测的缺点,操作简单、性能稳定、成本较低,具有广泛的应用前景。     

Specific vapor sorption properties of phosphorus-containing dendrimers

Specific combination of guest sorption properties was observed for phosphorus-containing dendrimers, which distinguish them from ordinary polymers and clathrate-forming hosts. The sorption capacity for 30 volatile guests, binding reversibility, guest desorption kinetics and guest exchange, glass transition behavior and ability to be plasticized with guest were studied for phosphorus dendrimers of different generations (G(1)-G(4) and G(9)) using quartz crystal microbalance sensor, FTIR microspectroscopy, atomic force microscopy, simultaneous thermogravimetry and differential scanning calorimetry combined with mass-spectrometry of evolved vapors. The dendrimers were found to have a different selectivity for different homological series of guests, high glass transition points without plasticization with guest even at high temperatures and saturation levels, moderate guest-binding irreversibility and ability both for effective guest exchange and independent guest sorption. These properties constitute an advantage of the studied dendrimers as receptor materials in various applications.     

Use of the quartz crystal microbalance for kinetic studies of thermal decomposition of solids

A quartz crystal microbalance has been proposed for studies on the temperature dependence of the linear rate of a reaction interface advance in topochemical reactions of the thermal decomposition of solids. A quartz crystal microbalance has been used in investigations of the CuSO₄ · 5H₂O dehydration. The data agree fairly well with those available in the literature. Advantages and disadvantages of the method proposed are discussed.     

Electrochemically controlled transport of small charged organic molecules across conducting polymer membranes

The transport of a range of functionalised sulfonated aromatics across conducting polypyrrole membranes has been considered. In the course of these studies several unique aspects of the chemical selectivity of these conducting materials have been identified. Using electrochemical quartz crystal microbalance (EQCM) the ion-exchange behaviour of these membranes was investigated to further elucidate the transport mechanism.     

Principles of quartz crystal microbalance/heat conduction calorimetry: Measurement of the sorption enthalpy of hydrogen in palladium

A sensitive new measurement technology is described which combines calorimetry, gravimetry, and rheology applied to chemical reactions in thin films: quartz crystal microbalance/heat conduction calorimetry (QCM/HCC). The quartz crystal microbalance/heat conduction calorimeters constructed so far simultaneously measure heat generation, mass uptake or release, and viscoelastic property changes in the same, sub-milligram solid film sample when gases interact with the film in an isothermal surrounding. It is possible to measure the energetics of formation of a single layer of adsorbed molecules on a gold surface with this technique. The principles of operation of both the mass and the heat flow sensor are described, and one implementation of the combined sensor and apparatus and its electronics is presented. Methods for calibration and the preparation of thin sample films are summarized. As an illustrative example, the determination of the sorption enthalpy of hydrogen in a 25 °C palladium film of 140 nm thickness is discussed in detail. Other examples of the operation of the QCM/HCC are tabulated.     

Study of zinc hexacyanoferrate—modified platinum electrodes using electrochemical quartz crystal microbalance

In this work, the electrochemical quartz crystal microbalance has been employed to monitor directly the in situ growth of the zinc hexacyanoferrate film during the electrodeposition. Mass changes of the platinum|crystal working electrode were correlated with cyclic voltammetry data. Effects of the sorption of counter-cations (K⁺, Na⁺, and NH₄⁺ {\hbox{NH}}_4^{+} and anions (Cl⁻ and SO₄^{2 -} {\hbox{SO}}_4^{2 - } ) during redox reactions were studied. The electrocatalytic oxidation properties of procaine by the zinc hexacyanoferrate films were performed.     

Preparation and properties of manganese dioxide studied by QCM

Electrodeposition and cycling of MnO₂ was tested by cyclic voltammetry and electrochemical quartz crystal microbalance (QCM). The electrodeposition from manganese sulfate and the material cycling are accompanied by strong and almost reversible water sorption close to the stoichiometric ratio 3:1. Similar reversible sorption of water was observed also on solid MnO₂ deposited as an “ink” (slurry) with polytetrafluoroethylene as a binder on the QCM probe.     

Study of hydrogen electrosorption in Pd-Ni alloys by the quartz crystal microbalance

The electrochemical quartz crystal microbalance (EQCMB) method has been used to study the processes of hydrogen absorption/desorption in Pd-Ni alloy electrodes. It was found that hydrogen electrosorption is accompanied by an additional frequency shift, attributed to the stresses generated inside the alloy. The influence of stresses on the EQCMB response depends on the amount of absorbed hydrogen and the alloy composition. From the comparison of the EQCMB results with Pd-Ni alloy absorption capabilities data, it was concluded that the decrease of the hydrogen sorption capacity at a Ni content of ca. 25–30 at% is due to an excessive generation of stresses in the alloy lattice. Also, a dependency of the rate of hydrogen absorption in Pd-Ni alloys on potential is reported. Electronic Publication     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures

The sorption of carbon dioxide in poly(lactic acid) (PLA) was studied by quartz crystal microbalance at high pressures. To address the effect of the D isomer present in the polymer on the gas sorption, measurements were performed in PLA with two different L:D contents, 80:20 and 98:2. New data for the solubility of carbon dioxide in PLA 80:20 and PLA 98:2 over a temperature range from 303.2 to 323.2 K and up to 5 MPa are presented. The results obtained were correlated with the dual‐mode sorption model and the Flory‐Huggins equation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1010–1019, 2006     

Preparation and properties of manganese dioxide studied by QCM

Electrodeposition and cycling of MnO₂ was tested by cyclic voltammetry and electrochemical quartz crystal microbalance (QCM). The electrodeposition from manganese sulfate and the material cycling are accompanied by strong and almost reversible water sorption close to the stoichiometric ratio 3:1. Similar reversible sorption of water was observed also on solid MnO₂ deposited as an “ink” (slurry) with PTFE as a binder on the QCM probe.     

Glassy polymer‐sorption phenomena measured with a quartz crystal microbalance technique

The quartz crystal microbalance (QCM) method is applied to the measurement of CO₂ sorption in glassy poly(ethylene terephthalate) (PET), poly(methyl methacrylate), and polysulfone. Polymer thin films in the thickness range of 350–550 nm are prepared by spin‐casting onto the quartz crystal devices. Sorption isotherms at temperatures below the glass transition are analyzed with the dual‐mode sorption model. As‐cast, quenched, and slow‐cooled thermal‐conditioning protocols yield consistent trends in the sorption level, namely, as‐cast > quenched > slow‐cooled. The sorption levels and model results for the quenched‐conditioned samples measured with QCM compare favorably with those reported from the pressure‐decay and gravimetric methods on thick films. With extended analysis of PET, the QCM technique is also useful for the exploration of the temperature dependence associated with gas sorption in glassy polymer systems. Measured heats of sorption and the collapse of the Langmuir component near the PET glass‐transition temperature agree with those reported previously. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2109–2118, 2003     

Pore spanning lipid bilayers on mesoporous silica having varying pore size

Synthetic lipid bilayers have similar properties as cell membranes and have been shown to be of great use in the development of novel biomimicry devices. In this study, lipid bilayer formation on mesoporous silica of varying pore size, 2, 4, and 6 nm, has been investigated using quartz crystal microbalance with dissipation monitoring (QCM-D), fluorescent recovery after photo bleaching (FRAP), and atomic force microscopy (AFM). The results show that pore-spanning lipid bilayers were successfully formed regardless of pore size. However, the mechanism of the bilayer formation was dependent on the pore size, and lower surface coverages of adsorbed lipid vesicles were required on the surface having the smallest pores. A similar trend was observed for the lateral diffusion coefficient (D) of fluorescently labeled lipid molecules in the membrane, which was lowest on the surface having the smallest pores and increased with the pore size. All of the pore size dependent observations are suggested to be due to the hydrophilicity of the surface, which decreases with increased pore size.     

Development of free radicals in sulfonated polystyrene ion-exchange resins upon drying

On exhaustive drying of sulfonated polystyrene-based ion-exchange resins, it is shown that free-radical centers develop. These have been examined by electron-spin resonance spectroscopy. The formation of the free radicals is largely reversible with respect to desorption and sorption of water which was measured by means of a quartz spiral microbalance. The spin-concentration isotherm as a function of sorbed water concentration is obtained. The presence of free radicals, dependent on water content in the resins, interferes with proton magnetic relaxation studies of hydration of ionized resins by providing a faster electron-spin coupled nuclear magnetic relaxation mechanism.     

Impedance Characterization of a Quartz Crystal Microbalance

The impedance characteristics of the quartz crystal used in quartz crystal microbalance is considered a higher dimension of information that can be obtained in addition to the resonant frequency change of the crystal. The impedance allows calculating the quality factor of the oscillator that is very closely related to the mechanical rigidity of the material, which is adsorbed or deposited on the quartz crystal. This paper concentrates on utilizing an impedance analyzer, often found in electroanalytical laboratories, instead of the usually required network analyzer.