重建彩色数字全息图时不同色光物光场的准确重叠研究

将数字全息检测物体表面视为散射面,球面波为参考波,使用角谱重建算法对不同波长照明情况下物平面光波场重建位置进行研究.结果表明,不考虑图像的物理意义时,衍射的一次傅里叶变换重建像中心与物光场频谱的中心相对应,以一次傅里叶变换重建像为参考,可以较好地确定物光场频谱位置,按照可变放大率的角谱重建算法实现不同色光重建场的准确重叠.     

Design of the spatial filter window for digital holographic convolution reconstruction of object beam field

In the convolution reconstruction process of digital holographic object beam field, the object beam fields with different magnifications can be obtained when the reconstructing beams are spherical waves with different wave curvature radii. This paper presents a theoretical and experimental discussion on the useful spatial frequency spectrum of the hologram numerically illuminated by the spherical wave. The result shows that there would be an image in the spatial frequency spectrum of digital hologram, which is completely the same as the object, if the wave surface radius of the spherical wave is equal to the distance from the object to the CCD sensor. Taking this image as a reference and designing a filter, the position of the reconstructed images with different magnifications can be predicted correctly in the reconstructed plane. Additionally, since the spectrum distribution of zero-order diffraction can be forecasted accurately in theory, its contribution can be effectively eliminated through changing the spatial filter shape; then a reconstructed object field containing more high-frequency information can be obtained.     

利用相位模板实现数字全息超分辨成像

为了简化数字全息超分辨记录系统,分别在其物光和参考光部分引入一块相位模板,以获得垂直和倾斜方向照明物体的光束和具有不同载波频率的参考光束.当这些具有不同照射方向的光透过物体后,可以使CCD在位置固定的情况下记录到携带低频和高频信息的物体衍射场,不同载波频率的参考光则保证了高频和低频信息在复合全息图的频谱面上能够相互分离.实验结果证明,通过将记录到的物体高频和低频信息合成,可以获得超出系统衍射极限分辨率的再现像.     

球面参考光波数字全息的一些特点分析及实验

对以球面波作为参考光记录数字全息图的采样和再现分离条件进行了详细的分析。推导出了同时满足采样和再现分离条件时,CCD及物体的横向尺寸、物体及参考光源至CCD的距离之间需要满足的关系式,证明了完全散射物体上复振幅在记录面上的叠加可以等效为一个点光源在记录面上产生的效果,进行了相应的实验研究。结果表明：数字全息术中采用球面参考光波可以比采用平面参考光波更容易满足采样和分离条件,并可以记录到更多的物体信息;在物体至CCD的距离固定的情况下,无透镜傅里叶变换全息术是优化的记录光路结构;散射物体比衍射物体的数字全息图更容易满足采样和分离条件。     

大景深多重全息术及其应用

提出并实现服用一般Ｈｅ－Ｎｅ激光器记录的大景攀重全息术，这种技术是根据光源时间相干性的特点，在参考光上作光路补偿来扩大景深，并用旋转光楔调制两平面参考波，记录大景深物场的多重全息图，这是一种重像数可以选择的大景深多重全息术，文中给出理论分析和实验结果，理论分析与实验结果是吻合的，文中还提出了用旋转光楔实现多路多参考光编码记录的多通道大景深全息干涉计量术，这种技术可用于研究大景深物场的时间序列动态过     

数字像面全息与同轴全息实验研究

通过采用数字像面全息与同轴全息技术拍摄透明物体以及不透明物体的全息图,并在计算机上再现。结果表明,当记录较小物体的全息图像时像面全息技术更加合适。     

无狭缝一步彩虹全息的新方法

本文提出一种新的三维漫射物体的一步彩虹全息方法.该法是在曝光过程中将被摄物体与成像透镜同时沿垂直光轴方向移动,并通过场镜使合成狭缝直接成像在场镜后焦面上,可得到较大观察范围的无畸变彩虹全息像.     

The use of a fibre-optic reference beam in a focused image holographic interferometer

Holographic interferograms recorded in the image plane of an optical system may be referenced by a beam transmitted through an incoherent fibre-optic bundle. In such a system the object to reference beam intensity ratio is non-critical, and path-length matching is easily achieved with commercial push fit connectors. Such an interferometer gives the user greater flexibility and can be used in a wide range of environments.     

数字全息波前重建中的像平面滤波技术研究

基于数字全息图的频谱平面滤波及像平面滤波技术,最近出现两种可变放大率的物光波前重建方法.为适应数字全息精细检测的要求,对两种滤波方法进行了研究,导出让局部重建图像布满重建平面的表达式.研究结果表明,像平面滤波技术优于频谱平面滤波技术,基于像平面滤波技术的重建方法能够按照需要的放大率高质量地重建局部物光场.给出彩色数字全...     

一种有效解决离轴数字全息相图倾斜畸变的数字参考平面方法

离轴数字全息中使用倾斜的平面参考波以消除成像中的零级衍射和共轭像是一种简捷和常用的方法,然而该方法遇到的一个困扰是,由于倾斜参考波引入了附加的载波频率并很难通过实验测量准确地获得附加的载波频率值或倾角,因此会导致重建的相图出现一定的倾斜畸变而无法完全修正.本文提出了一种数字参考平面算法以解决这一问题.该算法利用重建相图的平坦区域选点构建一个能准确表征相图倾斜的数字参考平面,并建立该平面参量与参考波载波频率的数学关系和作为随后相图畸变修正迭代计算的判据.该算法简单有效,不仅能实现对倾斜相位畸变的准确修正,而且能准确地获得倾斜平面参考波的附加载波频率.由于在相位解包裹重建中结合了抑噪处理,因此该方法在环境和系统噪声的影响下仍然有效,实验结果验证了理论设计的有效性.     

点源参考光数字全息的频谱和记录能力分析

基于最高空间频率分析法,对点源参考光数字全息的空间频谱进行了分析,得出了使空间频谱分离的条件。结合全息成像系统的分辨率,推导出了同时满足采样和再现像分离的记录条件以及CCD对被记录物体的数据记录能力。结果表明,对给定的物体和CCD来说,采用点源参考光比采用平面参考光更容易满足采样和分离的条件,并可以记录到更多的物体信息,从而可使再现像获得更高的分辨率。     

散射光彩色数字全息光学系统及波面重建算法研究

令物体表面为散射面,参考光及重建光为球面波,详细研究了离轴数字全息物光场重建平面的光波场.导出物光、共轭物光及零级衍射光分布与光学系统参数的关系.根据彩色数字全息的特点,提出抑制零级衍射干扰的光学系统设计方法,并且对一种能够避免插值误差的波面重建算法进行了优化研究,给出了相应的实验证明.     

Quantitative surface normal measurement by a wavefront camera

A compact wavefront camera that allows users to quantitatively measure the intensity and wavefront at a remote object plane is reported. The camera is built from a chip-scale wavefront sensor that we previously developed. By measuring the wavefront of the image and calibrating the wavefront relationship between the image and object planes, the wavefront at the object plane can be computed and the surface normal of the object can be derived. We built a prototype camera and calibrated the wavefront relationship. In a proof-of-concept experiment, a set of concave mirrors with different focal lengths (50-200 mm), were imaged. The results agree well with their expected values. To demonstrate the application of the camera, we applied this method to measure the deformation of a microfluidic channel under pressure.     

Vibration Analysis by Phase Shifting Digital Holography

Phase-shifting digital holography has been used for the study of vibrating objects. The time-averaged complex amplitude of Fresnel diffracted field due to a vibrating object was obtained by using a three-step phase-shifting algorithm. Taking the inverse Fresnel transform of the complex amplitude resulted in an image of the object superimposed with Bessel fringes. The Bessel fringes are contour map of the vibration amplitude. By sinusoidally modulating the phase of the reference beam at the vibration frequency, the brightest fringe could be shifted to points of interest, thus extending the measurable range of vibration amplitude.     

数字无透镜傅里叶变换全息术中非傍轴及离焦像差的校正

对数字无透镜傅里叶变换全息图直接采用逆傅里叶变换进行物场的数值重建时.需要满足两个条件:第一,全息图的记录过程必须满足傍轴近似条件,否则再现过程中会产生非傍轴像差;第二,记录全息图时物平面与参考点光源到全息图记录平面的距离必须相等,否则再现过程中会产生离焦像差.理论分析了非傍轴及离焦记录条件下数字无透镜傅里叶变换全息图的灰度分布特点,并提出了相应的非傍轴及离焦像差的数值校正方法.根据实际的非傍轴或离焦记录情况.分别给所记录的数字全息图灰度分布矩阵乘以适当的非傍轴或离焦校正因子,以消除灰度矩阵中非傍轴或离焦因素的影响.然后再对校正后的伞息图灰度矩阵做逆傅里叶变换处理.即可得到准确的数字再现像.实验结果表明.该数值重建方法能够有效地消除无透镜傅里叶变换全息术中数字再现像的非傍轴像差及离焦像差,提高再现像的质量.     

数字全息中的一些基本问题分析

利用全息理论、傅里叶频谱分析和采样定理，在模拟和数字全息光栅实验基础上，分析了数字全息记录和再现中的一些基本问题。结果表明：在物体和CCD尺寸确定的情况下，记录光路结构参量只取决于对图像采样的要求及CCD的像素尺寸，只要物体到CCD的距离满足采样要求，数字全息图再现光场的三个部分就可以分离；用准直平行光作为记录参考光和模拟再现光，可以得到与物体大小和形状完全一致的再现像；采样条件对再现像的影响大于分离条件，减小参物光的夹角记录适当过采样的数字全息图，有利于提高再现像的质量；另外，在获得高质量再现像方面，根据物体的具体特征，尽可能记录高质量的数字全息图，与满足采样条件和分离条件具有同样重要的意义。     

Digital holography at millimetre wavelengths

In this paper, we describe a method for wavefront reconstruction at millimetre wavelengths using off-axis holography, a frequently used image recording technique at visible wavelengths first demonstrated in the 1960’s. Millimetre radiation has been highlighted recently in the imaging of non-conducting materials and objects, which often show significant transparency at these long wavelengths, even though opaque at visible and infrared wavelengths. Holography provides a method for recording a lens-less image of an object thus reducing loss of spatial frequency information, which is important for obtaining maximum resolution at long wavelengths. An experimental arrangement based on a simple form of Fresnel off-axis holography is described, with the object illumination and reference beams derived using two radiating horn antennas fed by a single coherent source (a Gunn diode oscillator operating at 100 GHz – wavelength 3 mm) via a 3 dB cross-guide coupler. The process is discussed in the context of imaging and in the validation of millimetre wave radiation sources (horns). We show that the entire fields from these and other components can be analysed using computational optics with data derived from a single measurement obtained using inexpensive equipment.     

Development and investigation of an optical tilt sensor

An optical tilt sensor was developed and its performance was investigated. The tilt sensor set-up consisted of a laser light source, lenses and an image sensor. A precision reference tilt sensor was also installed on the same stage, and the measurement results of tilt angles using the optical and reference tilt sensors were correlated. The correlation coefficient (R-value) obtained under ideal conditions was 0.99454, indicating that the optical tilt sensor could produce as accurate measurements as the precision reference tilt sensor. The R-value decreased to 0.97714 and 0.93209 when the image sensor was shifted backwards and forwards from the focal plane by 1 mm, respectively. The R-value decreased to 0.96840 when the tilt sensor was performed with the room light turned on. There were not significant differences in the measurement results obtained with air conditioners turned on and off, indicating that the optical tilt sensor was robust and was not sensitive to the surrounding air turbulence. These findings are useful for the final design of the optical tilt sensor.     

A Hyperboloid Single Lens Focusing on a Spherical Image Surface up to Very High Angles of Incidence

Optical properties of a single hyperboloid lens cut by a lathe were investigated. The lens has a characteristic of focusing the object image to a spherical surface up to an angle of incidence close to 90 degrees. After analyzing the optical properties including spot diagrams in a plane vertical to the principal ray on the surface, the lens was found to be very effective in viewing an object over a very wide angle and is therefore thought to be especially suitable for many fields of application where image and information is transmitted over a very wide field at a time. Practically it is possible to apply this lens as a sensor of robot’s eye with a total field angle of almost 180 degrees.     

Fresnel diffraction method with object wave rotation for numerical reconstruction of digital hologram on tilted plane

We present a new method for numerically reconstructing holography image on tilted planes within the Fresnel domain. The method is based on the Fresnel diffraction algorithm and object wave rotation transform. By suitable rotation the object wave on recording plane and once fast Fourier transformation this method can be implemented. The proposed method can render the real image of the hologram not only on parallel plane but also on the tilted. Experimental results are presented to demonstrate the method for a single axis rotation.