Chelating diphos ligands with inorganic backbones. Crystal structure of [PtCl2{(PPh2O)2SiPh2}]

The metallo-phosphaalkenes (η⁵-C₅Me₅)(CO)₂FeP=C(R)(SiMe₃) (Ia: R = SiMe₃, Ib: R = Ph) and MeO₂C---CC---CO₂Me undergo a dipolar [3+2]-cycloaddition to afford the metallo-heterocycles [(η⁵-C₅Me₅)(CO)

Full-size image

=C(R)SiMe₃] (IIIa,b) with exocyclic P=C double bonds.     

Mononuclear Pt(II) and Pd(II) 1,4-dithiolato complexes. Crystal structures of [Pt((−) DIOS) (PPh3)2] and [Pd(S(CH2) 4S)(Ph2P(CH2) 3PPh2)]. Application in styrene hydroformylation

Addition of 1,4-dithiols to dichloromethane solutions of [PtCl₂(P-P)] (P-P = (PPh₃)₂, Ph₂P(CH₂)₃PPh₂, Phd₂P(CH₂)₄PPh₂; 1,4-dithiols = HS(CH₂)₄SH, (−)DIOSH₂ (2,3-O-isopropylidene-1,4-dithiol-l-threitol), BINASH₂ (1,1′-dinaphthalene-2,2′-dithiol)) in the presence of NEt₃ yielded the mononuclear complexes [Pt(1,4-dithiolato)(P-P)]. Related palladium(II) complexes [Pd(dithiolato)(P-P)] (P-P=Ph₂P(CH₂)₃PPh₂, Ph₂P(CH₂)₄PPh₂; dithiolato = ⁻S(CH₂)₄S⁻, (−)-DIOS) were prepared by the same method. The structure of [Pt((−)DIOS)(PPh₃)₂] and [Pd(S(CH₂)₄S)(Ph₂P(CH₂)₃PPh₂)] complexes was determined by X-ray diffraction methods. Pt—dithiolato—SnC1₂ systems are active in the hydroformylation of styrene. At 100 atm and 125°C [Pt(dithiolate)(P-P)]/SnCl₂ (Pt:Sn = 20) systems provided aldehyde conversion up to 80%.     

Oxidative addition of (PhSe)2 and (FcSe)2 to zerovalent palladium and platinum trialkylphosphine complexes (Fc = ferrocenyl, [Fe(η-C5H5)(η-C5H4)])

Room temperature reaction of [Pd₂(dba)₃]/PR₃ or [Pt(C₂H₄)(PR₃)₂] (dba = dibenzylideneacetone; R = Et, Bu) with the diselenides (R′Se)₂ (R′ = Ph, Fc) yielded the oxidative addition products trans-[M(SeR′)₂(PR₃)₂] (M = Pd, Pt). These have been characterised by multinuclear NMR and UV-Vis spectroscopy, mass spectrometry, and, in the cases of trans-[Pt(SePh)₂(PR₃)₂] (R = Et, Bu) and trans-[Pt(SeFc)₂(PBu₃)₂], also by X-ray crystallography.     

Simple protocol for the synthesis of the asymmetric PCP pincer ligand [C6H4-1-(CH2PPh2)-3-(CH(CH3)PPh2)] and its Pd(II) derivative [PdCl{C6H3-2-(CH2PPh2)-6-(CH(CH3)PPh2)}]

The asymmetric PCP pincer ligand [C₆H₄-1-(CH₂PPh₂)-3-(CH(CH₃)PPh₂)] (4) has been synthesized in a facile manner in three simple steps in high yield. Metallation of PCP pincer ligand (4) with [Pd(COD)Cl₂] affords complex [PdCl{C₆H₃-2-(CH₂PPh₂)-6-(CH(CH₃)PPh₂)}] (7) in good yield.     

A new homobimetallic arenediyl diplatinum(II) unit as building block for macromolecular synthesis. X-ray crystal structure of [C6H2{CH2NMe2}2-1,5-{PtCl(PPh3)}2-2,4]

Treatment of the diaminobenzene [C₆H₄{CH₂NMe₂}₂-1,3] (NCN-H, 1) with one or two equivalents of cis-PtCl₂(DMSO)₂ leads to exclusive formation of the doubly cycloplatinated species [C₆H₄{CH₂NMe₂}₂-1,5-{PtCl(DMSO)}₂-2,4] (3), which upon addition of triphenylphosphine yields the bisphosphine adduct [C₆H₄{CH₂NMe₂}₂-1,5-{PtCl(PPh₃)}₂-2,4] (4). The X-ray molecular structure of 4 revealed the presence of highly distorted square planar Pt(II) centers which is caused by close proximity of the two phosphine donor ligands. Complexes of type 3 can be regarded as suitable starting materials for the directional build-up of larger macromolecular structures.     

Synthesis and reaction chemistry of 4-nitrile-substituted NCN-pincer palladium(II) and platinum(II) complexes (NCN = [NC-4-C6H2(CH2NMe2)2-2,6])

Nitrile-functionalized NCN-pincer complexes of type [MBr(NC-4-C₆H₂(CH₂NMe₂)₂-2,6)] (6a, M = Pd; 6b, M = Pt) (NCN = [C₆H₂(CH₂NMe₂)₂-2,6]⁻) are accessible by the reaction of Br-1-NC-4-C₆H₂(CH₂NMe₂)₂-2,6 (2b) with [Pd₂(dba)₃ · CHCl₃] (5a) (dba = dibenzylidene acetone) and [Pt(tol-4)₂(SEt₂)]₂ (5b) (tol = tolyl), respectively. Complex 6b could successfully be converted to the linear coordination polymer {[Pt(NC-4-C₆H₂(CH₂NMe₂)₂-2,6)](ClO₄)}_n (8) upon its reaction with the organometallic heterobimetallic π-tweezer compound {[Ti](μ-σ,π-CCSiMe₃)₂}AgOClO₃ (7) ([Ti] = (η⁵-C₅H₄SiMe₃)₂Ti).The structures of 6a (M = Pd) and 6b (M = Pt) in the solid state are reported. In both complexes the d⁸-configurated transition metal ions palladium(II) and platinum(II) possess a somewhat distorted square-planar coordination sphere. Coordination number 4 at the group-10 metal atoms M is reached by the coordination of two ortho-substituents Me₂NCH₂, the NCN ipso-carbon atom and the bromide ligand. The NC group is para-positioned with respect to M.     

Unusual stabilization of cationic “M(η-allyl) (M = Pt, Pd) units by a dianionic cis-{Pt(C6F5)2(CCSiMe3)2} fragment

Chloride abstraction from [{M(η³ --- C₃H₅)Cl}_n] (M = Pt, n = 4 or M = Pd, n = 2) by (NBu₄)₂[cis-Pt(C₆F₅)₂(CCSiMe₃)₂] (1) gives rise to novel homo- and hetero-dinuclear zwitterionic derivatives (NBu₄) [{cis-Pt(C₆F₅)₂(CCSiMe₃)₂}M(η³-C₃H₅)] (M = Pt 2; M = Pd 3) which are formed by a M(η³-allyl)⁺ unit attached to both alkynyl ligands of the {cis-Pt(C₆F₅)₂(CCSiMe₃)₂}²⁻ fragment. The structure of 3 has been established by X-ray diffraction.     

A highly active two six-membered phosphinite palladium PCP pincer complex [PdCl{C6H3(CH2OPPr)2-2,6}]

The diphosphinite 1,3-bis[(di-isopropylphosphinite)methyl]benzene (2) has been synthesized and its complexation in palladium chemistry investigated. Complex 3 represents the first example of a two six-member PCP pincer bis(phosphinite) species. A catalytic study of 3 in the Heck reaction, revealed this specie to have an outstanding activity in the olefination of iodo-, bromo- and chloro-benzenes. When compared with other PCP pincer complexes, the results show that both by increasing the ring size from five to six-membered and using phosphinite instead of phosphine groups lead to a more active catalyst.     

Synthesis of 2-arylpropionic acids by electrocarboxylation of benzylchlorides catalysed by PdCl2(PPh3)2

Electrochemical carboxylation of benzylchlorides catalysed by Pd(II) complex afforded 2-arylpropionic acids in good yields under atmospheric pressure of carbon dioxide at constant current of 10 mA cm⁻². Mechanistic and electrochemical studies revealed the cooperative role of reduced palladium species in the activation of carbon dioxide.     

Synthesis and characterizations of N,N,N′,N′-tetrakis (diphenylphosphino)ethylendiamine derivatives: Use of palladium(II) complex as pre-catalyst in Suzuki coupling and Heck reactions

Oxidation of N,N,N′,N′-tetrakis(diphenylphosphino)ethylendiamine (1) with elemental sulfur and selenium gives the corresponding sulfide and selenide, respectively, [(Ph₂P(E))₂NCH₂CH₂N(P(E)Ph₂)₂] (E: S 1a, Se 1b). Complexes of 1 [(M₂Cl₄){(Ph₂P)₂NCH₂CH₂N(PPh₂)₂}] (M: Ni(II) 1c, Pd(II) 1d, Pt(II) 1e) were prepared by the reaction of 1 with NiCl₂ or [MCl₂(COD)] (M = Pd, Pt). The new compounds were characterized by NMR, IR spectroscopy and elemental analysis. The catalytic activity of Pd(II) complex 1d was tested in the Suzuki coupling reaction and Heck reaction. The palladium complex 1d catalyses the Heck reaction between styrene and aryl bromides as well as Suzuki coupling reaction between phenylboronic acid and arylbromides affording stilbenes and biphenyls in high yield, respectively.     

Synthesis and characterization of new sulfide aggregates of the type [{Pt2(μ3-S)2(P-P)2}M(C6F5)2] (M=Ni, Pd, Pt; P-P=2PPh3, 2PMe2Ph, dppf)

The reaction of [Pt₂(μ-S)₂(P-P)₂] (P-P=2PPh₃, 2PMe₂Ph, dppf) [dppf=1,1^′-bis(diphenylphosphino)ferrocene] with cis-[M(C₆F₅)₂(PhCN)₂] (M=Ni, Pd) or cis-[Pt(C₆F₅)₂(THF)₂] (THF=tetrahydrofuran) afforded sulfide aggregates of the type [{Pt₂(μ₃-S)₂(P-P)₂}M(C₆F₅)₂] (M=Ni, Pd, Pt). X-ray crystal analysis revealed that [{Pt₂(μ₃-S)₂(dppf)₂}Pd(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Ni(C₆F₅)₂], [{Pt₂(μ₃-S)₂(PPh₃)₂}Pd(C₆F₅)₂] and [{Pt₂(μ₃-S)₂(PMe₂Ph)₂}Pt(C₆F₅)₂] have triangular M₃S₂ core structures capped on both sides by μ₃-sulfido ligands. The structural features of these polymetallic complexes are described. Some of them display short metal-metal contacts.     

[Pd{2-CH2-5-MeC6H3C(H)NNC(S)NHEt}]3: An unprecedented trinuclear cyclometallated palladium(II) cluster through induced flexibility in the metallated ring

The reaction of 1-(2,5-dimethylbenzylidene)-3-ethylthiosemicarbazone and palladium acetate in acetic acid yields a trinuclear cyclometallated palladium(II) compound. Each thiosemicarbazone ligand is tridentate with the metal bonded to the carbon atom from the 2-methyl group, to the azomethine nitrogen and to the sulfur atom, which bridges to an adjacent palladium center. The crystal structure confirms the presence of a non-planar hexagonal metallated ring plus a central six-membered palladium-sulfur core within the trimer, which also displays a rather deep intramolecular cavity.     

Reversible photomagnetic properties of the molecular compound [{Cu(bipy)2}2{Mo(CN)8}]·9H2O·CH3OH

The optical and photomagnetic properties of [{Cu^II(bipy)₂}₂{Mo^IV(CN)₈}]·9H₂O·CH₃OH (1) have been reinvestigated. A comparison between spectra in solution and in the solid state revealed the presence of an intervalence band (or Metal–Metal Charge Transfer, hereafter noted MMCT) at 570 nm. The photomagnetic properties have been performed in a Superconducting QUantum Interference Device at 10 K with irradiation in the range of the MMCT: 488 nm, 520 nm and 647 nm at 10 K. An important increase of the magnetic signal has been measured after 1 h of irradiation at 488 nm, whereas a weaker increase has been obtained for the irradiation at 520 nm in the same conditions. Moreover, after an excitation at 488 nm, an irradiation at 647 nm has induced a decrease of the magnetic moment, which corresponds to a partial deexcitation. The complete characterization of the photoproduct has been realised after an irradiation of 4 h at 488 nm. The photomagnetic properties have shown an increase of the paramagnetism of 1 at low temperature. After a thermal heating at 300 K, the material goes back to its initial state before irradiation. It is the first time that a fully reversible photomagnetic behaviour for the compound [{Cu^II(bipy)₂}₂{Mo^IV(CN)₈}]·9H₂O·CH₃OH has been described. The observed properties have been discussed in terms of an electron transfer mechanism Mo → Cu.     

Formation and structural characterization of novel polynuclear palladium selenolato complexes [Pd3Se(SePh)3(PPh3)3]Cl and [Pd6Cl2Se4(SePh)2(PPh3)6]

In addition to well-known dinuclear phenylselenolato palladium complexes, the reaction of [PdCl₂(PPh₃)₂] and NaSePh affords small amounts of novel trinuclear and hexanuclear complexes [Pd₃Se(SePh)₃(PPh₃)₃]Cl (1) and [Pd₆Cl₂Se₄(SePh)₂(PPh₃)₆] (2). Complex 1 is triclinic, P1?, a=13.6310(2), b=16.2596(2), c=16.9899(3) Å, α=83.1738(5), β=78.9882(5), γ=78.7635(5)°. Complex 2 is monoclinic, C2/c, a=25.7165(9), b=17.6426(8), c=27.9151(14) Å, β=110.513(2)°. There are no structural forerunners for 1, but the hexanuclear complex 2 is isostructural with [Pd₆Cl₂Te₄(TeR)₂(PPh₃)₆] (R=Ph, C₄H₃S) that have been observed as one of the products in the oxidative addition of R₂Te₂ to [Pd(PPh₃)₄]. Mononuclear palladium complexes may play a significant role as building blocks in the formation of the polynuclear complexes.     

Synthesis of a new class of unsymmetrical PCP′ pincer ligands and their palladium (II) complexes: X-ray structure determination of PdCl{C6H3-2-CH2PPh2-6-CH2PBu2}

The unsymmetrical PCP′ pincer ligands {C₆H₄-1-CH₂PPh₂-3-CH₂PBu^t₂} and {C₆H₄-1-CH₂PPh₂-3-CH₂PPrⁱ₂} and the corresponding palladium complexes: PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PBu^t₂} and PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PPrⁱ₂} have been synthesized in good yields. The molecular structure of PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PBu^t₂} was determined through a single crystal X-ray diffraction study. The palladium center was found to be located into a slightly distorted square planar environment in which the {C₆H₄-1-CH₂PPh₂-3-CH₂PBu^t₂} ligand is coordinated as a tridentate, PCP pincer type chelate. The complex, PdCl{C₆H₃-2-CH₂PPh₂-6-CH₂PPrⁱ₂} catalyzes the Heck coupling of iodobenzene with styrene.     

Synthesis of palladium and platinum donor complexes and study of their participation in self-assembly reactions. X-ray crystal structure of [Pt(C6H4CCC5H4N)2(dppp)] (dppp = 1,3-bis(diphenylphosphino)propane)

Novel square-planar compounds [M(NC₅H₄CCH)₂(dppp)](OTf)₂ (M = Pd (1), Pt (2)), [Pt(CCC₆H₄CN)₂(dppp)] (3) and [Pt(C₆H₄CCC₅H₄N)₂(dppp)] (4) (dppp = 1,3-bis(diphenylphosphino)propane) were prepared and characterised. Their potential as building blocks in the generation of heterobimetallic squares was studied. The reaction of 4 and the ditopic acceptor species [Pd(H₂O)₂(dppf)](OTf)₂ enabled a tetrametallic metallocycle containing two platinum and two palladium atoms to be obtained. The crystal X-ray structure of 4 shows that the Pt?N vectors are nearly perpendicular, and confirm the suitability of the compound to act as a corner unit for the construction of molecular squares.     

Cyclopentadienyl-ruthenium and -osmium chemistry : XXXIX. Syntheses of novel alkynyl-ruthenium complexes. X-Ray structures of two forms of {Ru(PPh3)2(η-C5H5)}2(μ-C4) and of Ru{CCC(O)Me}(PPh3)2(η-C5H5)

Reactions between [Ru(thf)(PPh₃)₂(η-C₅H₅)]⁺ and lithium acetylides have given further examples of substituted ethynylruthenium complexes that are useful precursors of allenylidene and cumulenylidene derivatives. From Li₂C₄, mono- and bi-nuclear ruthenium complexes were obtained: single-crystal X-ray studies have characterised two rotamers of {Ru(PPh₃)₂(η-C₅H₅)}₂(μ-C₄), which differ in the relative cis and trans orientations of the RuL_n groups. Protonation of Ru(CCCCH)(PPh₃)₂(η-C₅H₅) afforded the butatrienylidene cation [Ru(C=C=C=CH₂)(PPh₃)₂(η-C₅H₅)]⁺, which reacted readily with atmospheric moisture to give the acetylethynyl complex Ru{CCC(O)Me}(PPh₃)₂(η-C₅H₅), also fully characterised by an X-ray structural study.     

Novel cyclometallated Pd(II) and Pt(II) complexes with indole derivatives and their use as catalysts in Heck reaction

Several palladacycle and platinacycle complexes have been prepared from easily available or naturally occurring indole derivatives, such as gramine and related compounds. Dimeric complexes were obtained with Pd(OAc)₂, while Pt(DMSO)₂Cl₂ mainly afforded monomeric structures. A notable feature of these reactions was the formation of new M-C bonds between Pd or Pt and C-2 and C-3 of the indole ring. With ligands like 2-(2′-pyridyl)-1H-indoles, N-N metallacycles were generated instead: in fact new C-M bonds with the C-3 position could only form if N-substituted indoles were used. The reactivity of Pd dimeric complexes with PPh₃, sym-collidine and DMAP was explored to obtain monomeric complexes. Three such compounds were prepared, one of which was characterized by X-ray diffraction. Metathetical reactions were carried out to effect a ligand exchange replacing OAc with halide ions, with the aim to synthesize μ-Cl and μ-Br bridged structures. Turning to the synthesis of hetaryl complexes, functionalization of the C-2 position on the indole ring was achieved. These complexes were prepared by substitution reactions starting from gramine and/or its alkylammonium salts.     

Hydrothermal synthesis and characterization of a new 3D vanadium(III) phosphite (C4H8N2H4)0.5(C4H8N2H3)[V4(HPO3)7(H2O)3]1.5H2O

A new vanadium(III) phosphite, (C₄H₈N₂H₄)_0.5(C₄H₈N₂H₃)[V₄(HPO₃)₇(H₂O)₃]1.5H₂O, has been synthesized hydrothermally by using V₂O₅, H₃PO₃ as reactants, piperazine as the structure-directing agent. The as-synthesized product was characterized by powder X-ray diffraction, IR spectroscopy, inductively coupled plasma analysis, thermogravimetric analysis, and SQUID magnetometer. Single-crystal X-ray diffraction analysis shows that the title compound crystallized in the trigonal space group (No. 165) with the parameters: , , and Z=4. Its structure is built up by alternation of octahedral VO₆ or VO₅(H₂O) and pseudo-pyramidal HPO₃ units to form infinite 2D layers, and these layers are interconnected by sharing vertex-oxygen with octahedral VO₆ units to generate a 3D open-framework structure with 12-membered ring channels in a and b directions, respectively, where there exist entrapped diprotonated and mono-protonated piperazine cations, and water molecules. Magnetic measurement indicates that paramagnetic behavior is observed down to 4 K.     

Novel structures of cyclometallated complexes of palladium(II) derived from terdentate ligands. Crystal and molecular structure of [Pd{C6H4C(H)=NCH2CH2CH2NMe2}(X)] (X=Cl, Br, I)

Treatment of N-(2-chlorobenzylidene)-N,N-dimethyl-1,3-propanediamine (1) and N-(2-bromo-3,4-(MeO)₂-benzylidene)-N,N-dimethyl-1,3-propanediamine (20) with tris(dibenzylideneacetone)dipalladium(0) in toluene gave the mononuclear cyclometallated complexes [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(Cl)] (2) and [Pd{3,4-(MeO)₂C₆H₂C(H)=NCH₂CH₂CH₂NMe₂}(Br)] (21), respectively, via oxidative addition reaction with the ligand as a C,N,N terdentate ligand. Reaction of 2 with sodium bromide or iodide in an acetone–water mixture gave the cyclometallated analogues of 2, [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(Br)] (3) and [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(I)] (4), by halogen exchange. The X-ray crystal structures of 2, 3 and 4 were determined and discussed. Treatment of 2, 3, 4 and 21 with tertiary monophosphines in acetone gave the mononuclear cyclometallated complexes [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(L)(X)] (6: L=PPh₃, X=Cl; 7: L=PPh₃, X=Br; 8: L=PPh₃, X=I; 9: L=PMePh₂, X=Cl; 10: L=PMe₂Ph, X=Cl) and [Pd{3,4-(MeO)₂C₆H₂C(H)=NCH₂CH₂CH₂NMe₂}(L)(Br)] (22: L=PPh₃; 23: L=PMePh₂; 24: L=PMe₂Ph). A fluxional behaviour due to an uncoordinated CH₂CH₂CH₂NMe₂ could be determined by variable temperature NMR spectroscopy. Treatment of 2, 3 and 4 with silver trifluoromethanesulfonate followed by reaction with triphenylphosphine gave the mononuclear complex [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(PPh₃)][F₃CSO₃] (11) where the Pd–NMe₂ bond was retained. Reaction of 2, 3 and 4 with ditertiary diphosphines in a cyclometallated complex–diphosphine 2:1 molar ratio gave the binuclear complexes [{Pd[C₆H₄C(H)=NCH₂CH₂CH₂NMe₂](X)}₂(μ-L–L)][L–L=PPh₂(CH₂)₄PPh₂(dppb) (13, X=Cl; 14, X=Br; 15, X=I; L–L=PPh₂(CH₂)₅PPh₂(dpppe): 16, X=Cl; 17, X=Br; 18, X=I) with palladium–NMe₂ bond cleavage. Treatment of 2, 3 and 4 with ditertiary diphosphines, in a cyclometallated complex–diphosphine 2:1, molar ratio and AgSO₃CF₃ gave the binuclear cyclometallated complexes [{Pd[C₆H₄C(H)=NCH₂CH₂CH₂NMe₂]}₂(μ-L–L)][F₃CSO₃]₂ (11: L–L=PPh₂(CH₂)₄PPh₂(dppb), X=Cl; 12: L–L=PPh₂(CH₂)₅PPh₂ (dpppe), X=Cl). Reaction of 2 with the ditertiary diphosphine cis-dppe in a cyclometallated complex–diphosphine 1:1 molar ratio followed by treatment with sodium perchlorate gave the mononuclear cyclometallated complex [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(cis-PPh₂CH=CHPPh₂–P,P)][ClO₄] (19).