Surface modification of ZrO2 nanoparticles with styrene coupling agent and its effect on the corrosion behaviour of epoxy coating

The surface of ZrO2 nanoparticles was modified by styrene coupling grafting method to improve the dispersion and interaction of the nanoparticles with the epoxy coating in which the modified ZrO2 nanoparticles were used as an additive. The grafting performance and microstructure of the nano- ZrO2/epoxy coating were analyzed by Fourier transformation infrared spectroscopy, X-ray diffraction, and scanning electron microscopy. The corrosion behavior of the nano-ZrO2/epoxy coating on mild steel was evaluated in neutral 3.5 wt% NaC1 solution using electrochemical impedance spectroscopy （EIS）. Both the coating capacitance and coating resistance fitted by the equivalent circuit from EIS were used to evaluate the protective performance of the coating towards the mild steel. The results show a superior stability and efficient corrosion protection by the modified ZrO2 nanoparticles. The epoxy coating containing 2 wt% modified ZrO2 nanoparticles exhibited the best corrosion performance among all the coating specimens. This research may provide an insight into the protection of mild steel using modified epoxy coatings.     

STRESS CORROSION CRACKING OF AISI 321 STAINLESS STEEL IN ACIDIC SEAWATER

ImooUonONSCCisoneofthemosttwortantcausoffailureofstaiuleSsstalequipmentandfacilitieS.Studiesonunh0refacilitiesshowedthatanaddicchloridesolutionfilmcouldbefo~onthescheeofstalandthatstaiuleSSstalisinaCtivedissolutionstateinaedicchloridesolutionopinetal.,l99O;Gnanamoorthyetal.,l99O).ltisgenerallythoughtxthatSCCcannotoimrwhenthematerialisinaCtiveanodicdissolutionstate,soitsomcewithresultingcasualties(0ldfieldetal.,l99O)arousedattentiont0it.SomeSCCmeCanisrnsproposedpeuang,l988,Newmanctal.,…     

ELECTROCHEMICAL STUDY ON CORROSION BEHAVIOUR OF STEELS IN SAND WITH WATER

ImooUcr0NCormsinnofsodinconatisnowrognindasaseriousproblemwithlargeere-nondconSequenas.Thecormsionproducofondatthesurfaeeofrenfontin-dutaltenSioninthernaterial,resultinginfraCtureandspillingoftheconcretefromtherenfoot(Madrinaldetal.,l99l).Asaasult,theconCretestructure'sIneCanhalstwthisgreatiytalued.0wingtothephyShaldfultyofconduCtingforchdricalexperiInentsinconare,muCoftheworkintheaasofndanisticdCtendnationsforcormsionofstalincon-~wereconduedinalkalinesolution,generallyofporewatCr(Romirz…     

ELECTROCHEMICAL MEASUREMENTS FOR MARINE ATMOSPHERIC CORROSION STUDIES USING KELVIN PROBE REFERENCE ELECTRODE

A Kelvin probe was used as reference in this study on electrochemical measurements of a simulatedmarine atmospheric corrosion system (electrode covered by a very thin electrolyte layer). The experimentalsetups for improved measurements proved satisfactory for the conventional steady-state electrochemicalmeasurements in atmospheric studies.     

三元复合驱采油污水阻垢缓蚀剂电化学分析

研制适用于三元复合驱采油污水工况条件下的MPM固体缓蚀阻垢剂,分析三元复合驱采油污水中MPM的电化学特性.结果表明:随着温度增加,20#钢在采油污水的腐蚀速率呈增加趋势,极化曲线显示钝化区表面材料在表面高温下处于钝化状态,产生的钝化膜能够降低腐蚀速度.在阻垢缓蚀剂质量浓度相同的情况下,不同温度的电化学阻抗谱在高频区出现容抗弧,显示优良的缓蚀性能.不同质量浓度MPM极化曲线表明,缓蚀率随MPM质量浓度的增加而增大,MPM极值质量浓度为80mg/L.污水体系中的Ca2+、Cl-对缓蚀率产生影响.MPM适用于高质量浓度Ca2+的三元复合驱采油污水处理.     

ELECTROCHEMICAL CORROSION BEHAVIOR OF STEEL IN THE JUNCTURE AREA OF SEA CLAY AND SAND

Corrosion behavior of steel in the juncture area of sea clay and sand was studied. The results show that galvanic corrosion occurred between steel samples buried in sea clay and sand, and that the polarity of the galvanic cell reversed after some testing later. The cause of reversing of polarity is discussed.     

Evaluation and classification of seawater corrosiveness by environmental factors

According to the data of main environmental factors and the depth of localized corrosion of carbon steel and low alloy steels in China seas, combined with the result of grey interrelation analysis, double-factor method was proposed to evaluate and classify seawater corrosiveness. According to the temperature of seawater and the biologically adhesive area on steels, the corrosiveness of seawater from low to high level is classified into five levels （C l-C5）, which was identified by the data of corrosion depth of carbon steel immersed in water for one year.     

EFFECT OF SULPHATE-REDUCING BACTERIA ON ELECTRO-CHEMICAL CORROSION BEHAVIOR OF 16Mn STEEL IN SEA MUD

ＩＮＴＲＯＤＵＣＴＩＯＮＩｔｗａｓｇｅｎｅｒａｌｌｙｃｏｎｓｉｄｅｒｅｄｐｒｅｖｉｏｕｓｌｙｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｏｆｓｔｅｅｌｉｎｓｅａｍｕｄｗａｓｎｏｔｓｅｒｉｏｕｓ.Ｈｏｗｅｖｅｒ,ｉｔｗａｓｌａｔｅｒｆｏｕｎｄｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｒａｔｅｏｆｓｔｅｅｌｉｎｓｏｍｅｓｅａｍｕｄｗａｓｈｉｇｈｅｒｔｈａｎｔｈａｔｉｎｓｅａｗａｔｅｒ(Ｋｉｎｇ,1980;Ｓｅｈｍｉｄｅ,1982;Ｇｕｏｅｔａｌ.,1997;Ｈｏｕ,1998).Ｔｈｅｒｅａｒｅｓｏｍｅｒｅｐｏｒｔｓｔｈａｔｔｈｅｃｏｒｒｏｓｉｏｎｒ…     

Influence of active marine organic matter on electrochemical corrosion

Chemical means were used to extract polyphenols from healthy brown algae collected in littoral seawater. Experiments on corrosion of A₃ steel, the time-potential curve, and polarization curve in polyphenols seawater showed stronger cathodic polarization compared with that in common seawater. This indicates that brown algae polyphenols might feasibly be used as corrosion inhibitor in seawater. Contribution No. 3763 from the Institute of Oceanology, Chinese Academy of Sciences. Project 59471054 supported by NSFC and National “Nineth Five Year” Project 96-916-04-01.     

Investigations of natural and artificial radioactive isotopes in seawater and sediments in the Yellow Sea and adjacent southeast area

Investigations of natural and artificial radioisotopes including 90Sr,137Cs, gross B and U carried out in the Yellow Sea and adjacent southeast area in 1963. 1964, 1975 and 1978 showed that radioactive pollution by 90Sr and 137Cs from atmospheric fallout had gradually decreased with time due to the cessation of atmospheric nuclear weapons tests in the 70s. The distributions of natural and artificial radioactive isotopes (U, Ra, Th. 40K and 137Cs) in sediments southwest of Jizhou Island were uniform. The more uniform may be related to the soluble species of U[Uo2(CO3)4] in the seawater.The high value of Th at stations 3 and 6 was related to the sandy clay sediment; the low value at station 8 was related to sandy sediment. The content of 137Cs in the eddy area being less than about half of that in the China inshore area showed that the source of Cs may be insufficient orthat the conditions for enriching " Cs in the circulation eddy area were not favorable.     

Electrochemical measurement of steel corrosion in seabottom sediment with “MD” method

The through one year corrosion potential and polarization resistance for 3 kinds of steels in seabottom sediment of Liaodong Bay were measured with the “MD” method. The measurements will have some theoretical and practical values. The theoretical value lies in that the recorded changing process of the practical corrosion case can be basis for indoor discussion and electrochemical research on the corrosion process. The practical value lies in that the obtained data can be basis for designing and controlling electrochemical protection systems. In fact, it is very difficult to measure in situ the corrosion parameters of steels in sea sediment. Contribution No. 2611 from the Institute of Oceanology, Chinese Academy of Sciences. This study is a major project of the Chinese Academy of Sciences.     

ELECTROCHEMICAL STUDIES ON THE CATHODIC REACTION OF MARINE ATMOSPHERIC CORROSION

Electrochemical studies on the cathodic reaction of marine atmospheric corrosion using Kelvin probeas reference electrode showed that the rate of cathodic reaction-oxygen reduction first increases then de-creases, with the reaction maximizing at a certain thickness as the electrolyte film decreases duringevaporation. It was indicated that with decreasing electrolyte thickness by drying, the oxygen reduction ratewas accelerated by the faster oxygen diffusion due to the thinner electrolyte layer on the metal surface. Theresults also revealed that although the oxygen salting out effect has great influence on the rate of oxygenreduction, it is not the main causative factor for the decrease in cathodic limiting current in the case of avery thin electrolyte layer.     

Photochemical degradation of crude oil in seawater

1 INTRODUCTION Marine photochemistry is a newly developed subject in marine sciences. Photochemical degrada- tion is important in decomposing and removing various organic contaminants in oceans (Ali et al., 1995a, b; Yang, 2000; Yang and Qi, 2002; 2003). …     

Photodegradation of methylene blue in natural seawater

This paper reports the photochemical degradation of Methylene Blue(MB)in natural seawater(NSW).The photodegradation reaction conformed to the first-order reaction kinetics with the rate constant 0.0158 min-1.MB was photochemically degradated faster under high-pressure mercury lamp(HPML)than under sunlight.When MB was in lower concentrations,salinity could inhibit the photoreaction whereas MB in higher concentration,salinity could accelerate the photoreaction.Humid acid could also inhibit the photoreactions.Toxicity tests with marine phytoplankton Skeletonema costatum(Sk)and Heterosigma akashiwo Hada (Ha)showed decreased acute toxicity after photodegradation.     

Photochemical degradation of triadimefon in seawater

The photochemical degradation of triadimefon in seawater was investigated under different reaction conditions in this study. The results showed that triadimefon could be effectively degraded by the irradiation of a high-pressure mercury lamp and the photodegradation rotes were influenced by aquatic media, heavy metal ions and photosensitizers. The photochemical degradation of triadimefon followed the first-order reaction kinetic behavior, with the rate constants ranging from 0.0027 to 0.0128 min-1 under the studied conditions. The photolysis of triadimefon was slower in natural seawater than in distilled water or synthetic seawater. All the heavy metal ions studied in this paper had inhibition effects on the photolysis of triadimefon. Acetone, as a common photosensitizer, could accelerate the photolysis of triadimefon. Three photoproducts were identified by GC-MS analysis. Our study confirmed that photochemical degradation is an effective pathway to remove triadimefon in seawater.     

Photochemical oxidation of benzothiophene in seawater

ＩＮＴＲＯＤＵＣＴＩＯＮｐｈｏｔｏｃｈｅｍｉｃａｌｏｘｉｄａｔｉｏｎｏｆｂｅｎｚｏｔｈｉｏｐｈｅｎｅｉｎｓｅａｗａｔｅｒｉｎｏｒｄｅｒｔｏｌｅａｒｎｍｏｒｅａｂｏｕｔｔｈｅｒｅｍｏｖａｌｐａｔｔｅｒｎｏｆｔｈｉｓｐｏｌｌｕｔａｎｔｉｎｍａｒｉｎｅｅｎｖｉｒｏｎｍｅｎｔｓ.Ｂｅｎｚｏｔｈｉｏｐｈｅｎｅｗａｓｃｈｏｓｅｎｆｏｒｔｈｉｓｓｔｕｄｙｓｉｎｃｅｉｔｉｓｔｈｅｓｉｍｐｌｅｓｔ　　Ｔｈｅｈｉｇｈ -ｐｒｅｓｓｕｒｅｍｅｒｃｕｒｙｌａｍｐｕｓｅｄｉｎｔｈｉｓｓｔｕｄｙｃｏｕｌｄｐｒｏｄｕｃｅｌｉｇ…     

POTENTIOMETRIC TITRATION OF CALCIUM IN SEAWATER

Atpasent,thestandardmethodfordetendningcalciuminseawateriscomPlexometrictitrationusingEGTA[ethyleneglycol-bis(2-adrinoethylether)-N,N,N',N'-tetraaceticacid]andGHAtelyoxal-bis(2-hydroxyanil)].ThisInethodwasfirStdeveopedbyTSunogaietal.(l968),sumrnarindbyKremling,andeditalinMethodsofSeawaterAnalySisbyGrasshoff(l983).AlthoughtheendpointreadingsinthismethodarenotquitCsharp,andrnaybeaffCCtedbyoveanstweather,withtheuseofcalctumISEasindicatingeledrode,SCEasreferenceeledrodeanddigitalvoltme…     

Electrochemical behavior of Al—basic sacrificial anode at estuary

The Al—basic sacrificial anode is widely used to protect steel construction from corrosion in seawater, but is not suitable for protecting steel in freshwater. In the estuary area, seawater and freshwater mix and different seawater salinity can be formed in different mixing sites between freshwater and seawater. Based on the requirements of the Shengli Petroleum Administrative Bureau of China, the effect of seawater salinity on electrochemical properties of Al—basic anode was studied under laboratory conditions by the method given in National Standard GB 4948-85 (China Starndard Bureau, 1985). No obvious effect was found when seawater salinity was 30 to 10, but obvious effect on anodic open circuit potential, closed circuit potential and current efficiency was found when seawater salinity was 5. These values are lower than those given in the National Standard. Contribution No. 2681 from the Institute of Oceanology, Chinese Academy of Sciences. This study is a major project (Ky85-11-5) and a key project (A14920416) of the Chinese Academy of Sciences, and also received support from the Shengli Oil Field.     

Applications of dip angle and coherence attributes to recognition of volcanic edifice in Songliao Basin

On the basis of the shape and inner structure of volcanic edifice, the dip angle and coherence were selected to recognize the buried volcanic edifices in Songliao Basin. Five volcanic edifices were recognized in both two methods in the first volcanic cycle of Yingcheng Formation and the prediction perfectly corresponds to the drilling results in well XS8 area. The results are satisfying when the prediction method were employed in the exploration and development of Qingshen gas field.     

Applications of dip angle and coherence attributes to recognition of volcanic edifice in Songliao Basin

On the basis of the shape and inner structure of volcanic edifice,the dip angle and coherence were selected to recognize the buried volcanic edifices in Songliao Basin.Five volcanic edifices were recognized in both two methods in the first volcanic cycle of Yingcheng Formation and the prediction perfectly corresponds to the drilling results in well XS8 area.The results are satisfying when the prediction method were employed in the exploration and development of Qingshen gas field.