Orientation variation along growth direction of millimeter free-standing CVD diamond thinned by mechanical grinding

A free-standing diamond film with millimeter thickness prepared by DC arc plasma jet was thinned successively by mechanical grinding. The orientation and quality of the diamond films with different thicknesses were characterized by X-ray diffraction and Raman spectroscopy, respectively. The results show a random grain-orientatinn distribution during the initial growth stage. As the film thickness increases, the preferred orientation of the diamond film changes from （111） to （220）, due to the competitive growth mechanism. Twinning generated during the nucleation stage appears to stabilize the preferential growth along the 〈110〉 direction. The interplanar spacing of the （220） plane is enlarged as the film thickness increases, which is caused by the increase of non-diamond-phase carbon and impurities under the cyclic gas. In addition, the quality of the diamond film is barely degraded during the growth process. Furthermore, the peak shift demonstrates a significant inhomogeneity of stress along the film growth direction, which results from competitive growth.     

Analysis and design of resistance-wire heater in MOCVD reactor

Metal organic chemical vapor deposition（MOCVD） is a key equipment in the manufacturing of semiconductor optoelectronic devices and microwave devices in industry. Heating system is a vital part of MOCVD. Specific heating device and thermal control technology are needed for each new reactor design. By using resistance-wire heating MOCVD reaction chamber model, thermal analysis and structure optimization of the reactor were developed from the vertical position and the distance between coils of the resistance-wire heater. It is indicated that, within a certain range, the average temperature of the graphite susceptor varies linearly with the vertical distance of heater to susceptor, and with the changed distances between the coils; furthermore, single resistance-wire heater should be placed loosely in the internal and tightly in the external. The modulate accuracy of the temperature field approximately equals the change of the average temperature corresponding to the change of the coil position.     

Dielectric,piezoelectric, and ferroelectric properties of lanthanum-modified PZTFN ceramics

Specimens of Pb1-1.5xLax（Zr0.53 Ti0.47）1-y-zFeyNb2O3 （x = 0, 0.004, 0.008, 0.012, and 0.016, y = z = 0.01） （PZTFN） ceramics were synthesized by a semi-wet route. In the present study, the effect of La doping was investigated on the structural, microstructural, dielectric, piezoelectric, and ferroelectric properties of the ceramics. The results show that, the tetragonal （space group P4mm） and rhombohedral （space group R3c） phases are observed to coexist in the sample at x = 0.012. Microstructural investigations of all the samples reveal that La doping inhibits grain growth. Doping of La into PZTFN improves the dielectric, ferroelectric, and piezoelectric properties of the ceramics. The hys- teresis loops of all specimens exhibit nonlinear behavior. The dielectric, piezoelectric and ferroelectric properties show a maximum response atx 〉 0.012, which corresponds to the morphotropic phase boundary （MPB）.     

Formation mechanism of reservoir oolitic dolomite in Lower Triassic Feixianguan formation,northeastern Sichuan Basin,southwest China

A series of marine natural gas fields were recently discovered in oolitic dolomites of the Lower Triassic Feixianguan formation, northeastern Sichuan Basin, southwest China. The mechanism forming these reservoir dolomites is debatable, limiting the ability to characterize these reservoir successfully. Based on the investigation of the representative Dukouhe, Luojiazhai, and Puguang areas, this issue was addressed by examining the distribution, petrology, and geochemistry of the dolomites, the most comprehensive study to date was provided. Dolomitization occurred at a very early stage of diagenesis, as shown by the petrological features of the rock fabric. Vadose silt, which is composed primarily of dolomitic clasts, is found in the primary and secondary pores of the oolitic dolomite. This indicates that the overlying strata were subjected to dolomitization when the Feixianguan formation was located in the vadose zone. Therefore, it may be inferred that the dolomitization which occurred before the formation was exposed to meteoric conditions. The spatial distribution and geochemical characteristics of the dolomite indicate that dolomitization occurred as a result of seepage reflux. The degree of dolomitization decreases with increasing distance from the evaporative lagoon. Furthermore, the type and porosity of the dolomite vary in different zones of the upward-shoaling sequence, with the porosity gradually decreasing from the highest layer to the lowest layer. This reflects a close relationship between dolomitization and seawater evaporation during the formation of the dolomite. Geochemical analysis provided further evidence for the relationship between the dolomitization fluid and the coeval seawater. The 87Sr/86Sr and 813C isotopes, as well as the abundances of trace elements, Fe and Mn, indicate that seawater concentrated by evaporation acted as the dolomitization fluid. These results also show that dolomitization most likely occurred in a semi-closed diagenetic environment. Therefore, the main mechanism of ool     

Mechanical,electrical, and thermal properties of the directionally solidified Bi-Zn-AI ternary eutectic alloy

A Bi-2.0Zn-0.2A1 （wt%） ternary eutectic alloy was prepared using a vacuum melting furnace and a casting furnace. The samples were directionally solidified upwards at a constant growth rate （V= 18.4 μm/s） under different temperature gradients （G = 1.15-3.44 K/mm） and at a constant temperature gradient （G = 2.66 K/mm） under different growth rates （V= 8.3-500 μm/s） in a Bridgman-type directional so- lidification furnace. The dependence ofmicrostructure parameter （2） on the solidification parameters （G and V） and that of the microhardness （Hv） on the microstructure and solidification parameters were investigated. The resistivity （ρ） measurements of the studied alloy were per- formed using the standard four-point-probe method, and the temperature coefficient of resistivity （α） was calculated from the ρ-Tcurve. The enthalpy （AH） and the specific heat （Cp） values were determined by differential scanning calorimetry analysis. In addition, the thermal conductivities of samples, obtained using the Wiedemann-Franz and Smith-Palmer equations, were compared with the experimental results. The results revealed that, the thermal conductivity values obtained using the Wiedemarm-Franz and Smith-Palmer equations for the Bi-2.0Zn-0.2Al （wt%） alloy are in the range of 5.2-6.5 W/Km and 15.2-16.4 W/Km, respectively.     

Effects of magnetic fields on Fe-Si composite electrodeposition

Coatings containing Fe-Si particles were electrodeposited on 3.0wt% Si steel sheets under magnetic fields. The effects of magnetic flux density （MFD）, electrode arrangement and current density on the surface morphology, the silicon content in the coatings and the cathode current efficiency were investigated. When a magnetic field was applied parallel to the current and when the MFD was less than 0.5 T, numerous needle-like structures appeared on the coating surface. With increasing MFD, the needle-like structures weakened and were transformed into dome-shaped structures. Meanwhile, compared to results obtained in the absence of a magnetic field, the silicon content in the coatings significantly increased as the MFD was increased for all of the samples obtained using a vertical electrode system. However, in the case of an aclinic electrode system, the silicon content decreased. Furthermore, the cathode current efficiency was considerably diminished when a magnetic field was applied. A possible mechanism for these phenomena was discussed.     

Influence of silicon on the microstructures,mechanical properties and stretch-flangeability of dual phase steels

Uniaxial tension tests and hole-expansion tests were carried out to determine the influence of silicon on the microstructures, mechanical properties, and stretch-flangeability of conventional dual-phase steels. Compared to 0.03wt% silicon, the addition of 1.08wt% silicon induced the formation of finer ferrite grains （6.8μm ） and a higher carbon content of martensite （Cm≈ 0.32wt%）. AS the silicon level increased, the initial strain-hardening rate （n value） and the uniform elongation increased, whereas the yield strength, yield ratio, and stretch-flangeability decreased. The microstructures were observed after hole-expansion tests. The results showed that low carbon content martensite （Cm ≈ 0.19wt%） can easily deform in coordination with ferrite. The relationship between the mechanical properties and stretch-flangeability indicated that the steel with large post-uniform elongation has good stretch-flangeability due to a closer plastic incom- patibility of the ferrite and martensite phases, which can effectively delay the production and decohesion of microvoids.     

Interference management via access control and mobility prediction in two-tier heterogeneous networks

Abstract： Two-tier heterogeneous networks （HetNets）, where the current cellular networks, i.e., macrocells, are overlapped with a large number of randomly distributed femtocells, can potentially bring significant benefits to spectral utilization and system capacity. The interference management and access control for open and closed femtocells in two-tier HetNets were focused. The contributions consist of two parts. Firstly, in order to reduce the uplink interference caused by MUEs （macrocell user equipments） at closed femtocells, an incentive mechanism to implement interference mitigation was proposed. It encourages femtoeells that work with closed-subscriber-group （CSG） to allow the interfering MUEs access in but only via uplink, which can reduce the interference significantly and also benefit the marco-tier. The interference issue was then studied in open-subscriber-group （OSG） femtocells from the perspective of handover and mobility prediction. Inbound handover provides an alternative solution for open femtocells when interference turns up, while this accompanies with PCI （physical cell identity） confusion during inbound handover. To reduce the PCI confusion, a dynamic PCI allocation scheme was proposed, by which the high handin femtocells have the dedicated PCI while the others share the reuse PCIs. A Markov chain based mobility prediction algorithm was designed to decide whether the femtoeell status is with high handover requests. Numerical analysis reveals that the UL interference is managed well for the CSG femtocell and the PCI confusion issue is mitigated greatly in OSG femtocell compared to the conventional approaches.     

Phase,magnetism and thermal conductivity of glass ceramics from iron ore tailings

In order to develop the applications of ore tailings, the glass ceramics were prepared by using a conventional melting-quenching-sintering process. The phase component, microstructures, magnetic properties and thermal conductivities of the prepared glass ceramics were investigated by using X-ray diffractometer, scanning electron microscopy, vibrating sample magnetometer and thermophysical properties tester, respectively. The results show that orthorhombic olivine-type phase and triclinic sunstone-type phase formed when the glass was annealed at 700 oC, the concentration of olivine-type and sunstone-type phases decreased, the spinel-type cubic phase occurred and the amount increased when the annealing temperatures increased. The magnetic properties from the cubic spinel ferrites were detected in the glass ceramics, and the related saturation magnetization increased with the annealing temperature increasing. The porous glass ceramics with magnetic property showed much lower thermal conductivity, compared with the non-magnetic porous glass-ceramic and the dense glass-ceramics.     

Characteristics and formation of high quality reservoirs in sediment gravity flows of Gangzhong area,Huanghuadepression简

Reservoirs can be developed in the sediment gravity flows.However,high quality reservoirs are found widespread in sediment gravity flows of Gangzhong area,Huanghua depression,Bohai Bay Basin,East China.Characteristics and formation of these reservoirs are key problems to be solved.Through comprehensive analysis of thin section petrography,scanning electron microscopy and X-ray diffraction,two distinct rules were obtained.1） These high quality reservoirs have apparent characteristics：lithology consists mainly of medium-fine grained sands; moderately-well sorted and rounded; intergranular pores dominating 70% of the entire pores,surface per unit pore volume reaches 15%; average porosity is 21% and average permeability is 55×10-3 μm2.2） Types of sedimentary microfacies and dissolution strongly control on the formation of high quality reservoirs.Main channels and sandy braided bars have the best reservoir properties.Because that sediments are mainly medium-fine grained sands in high-energy environments.The favorable primary porosity and permeability may promote calcite cementation and help to produce more secondary pores.Besides,at the depth of 2500-3200 m,basically matching threshold of oil generation,organic acid expelled when organic matter became mature,and H＋ released during clay mineral transformation.These both result in the dissolution of calcite cements and create large volume pores,then physical properties improve correspondingly.Moreover,deep hydrothermal fluid intrusion may also have impacts on the development of secondary pores.     

Fabrication and densification enhancement of SiC-particulate-reinforced copper matrix composites prepared via the sinter-forging process

The fabrication of copper （Cu） and copper matrix silicon carbide （Cu/SiCp） particulate composites via the sinter-forging process was investigated. Sintering and sinter-forging processes were performed under an inert Ar atmosphere. The influence of sinter-forging time, temperature, and compressive stress on the relative density and hardness of the prepared samples was systematically investigated and subsequently compared with that of the samples prepared by the conventional sintering process. The relative density and hardness of the composites were enhanced when they were prepared by the sinter-forging process. The relative density values of all Cu/SiCp composite samples were observed to decrease with the increase in SiC content.     

Effect of substrate doping on threshold voltages of buried channel pMOSFET based on strained-SiGe technology

The effect of substrate doping on the threshold voltages of buried channel pMOSFET based on strained-SiGe technology was studied. By physically deriving the models of the threshold voltages, it is found that the layer which inversely occurs first is substrate doping dependent, giving explanation for the variation of plateau observed in theC-V characteristics of this device, as the doping concentration increases. The threshold voltages obtained from the proposed model are-1.2805 V for buried channel and-2.9358 V for surface channel at a lightly doping case, and-3.41 V for surface channel at a heavily doping case, which agrees well with the experimental results. Also, the variations of the threshold voltages with several device parameters are discussed, which provides valuable reference to the designers of strained-SiGe devices.     

Desulfurization ability of refining slag with medium basicity

The desulfurization ability of refining slag with relative lower basicity （B） and Al2O3 content （B = 3.5-5.0; 20wt%-25wt% Al2O3） was studied. Firstly, the component activities and sulfide capacity （Cs） of the slag were calculated. Then slag-metal equilibrium experiments were carried out to measure the equilibrium sulfur distribution （Ls）. Based on the laboratorial experiments, slag composition was optimized for a better desulfurization ability, which was verified by industrial trials in a steel plant. The obtained results indicated that an MgO-saturated CaO-Al2O3-SiO2-MgO system with the basicity of about 3.5-5.0 and the Al2O3 content in the range of 20wt%-25wt% has high activity of CaO （αCaO）, with no deterioration of Cs compared with conventional desulfurization slag. The measured Ls between high-strength low-alloyed （HSLA） steel and slag with a basicity of about 3.5 and an Al2O3 content of about 20wt% and between HSLA steel and slag with a basicity of about 5.0 and an Al2O3 content of about 25wt% is 350 and 275, respectively. The new slag with a basicity of about 3.5-5.0 and an Al2O3 content of about 20wt% has strong desulfurization ability. In particular, the key for high-efficiency desulfurization is to keep oxygen potential in the reaction system as low as possible, which was also verified by industrial trials.     

Fluidized bed coating efficiency and morphology of coatings for producing Al-based nanocomposite hollow spheres

Abstract： We performed fluidized bed coating ofAl-based nanoeomposite powder-binder suspensions onto polymer substrates. The effects of the type and amount of the binder and nanoparticle additive on the coating process efficiency and coating characteristics were investigated. The efficiency decreased from 52% to 49% as the processing time increased from 15 to 20 min. However, the amount and thickness of the coating also increased as the processing time and amount of the binder were increased. The addition of nanoparticles to the system decreased the thickness of the coating from 222 to 207 μm when polyvinyl alcohol （PVA） was used as a binder. The suspension containing 3wt% R-4410 binder exhibited the greatest efficiency of 60%.     

A ternary TiO2/WO3/graphene nanocomposite adsorbent： facile preparation and efficient removal of Rhodamine B

Ternary TiO2/WO3/graphene （TWG） nanocomposites were prepared by a facile salt-ultrasonic assisted hydrothermal method. The products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption--desorption. Both anatase TiO2 and orthorhombic WO3 formed in the nanocomposites, along with a highly disordered overlay of individual graphene nanosheets. Polyhedral and spherical TiO/and WO3 nanoparticles of uniform size 10-30 nm were densely anchored to the graphene sheets. The maximum specific surface area of the products was 144.59 m2·g^-1. The products showed clear abilities for the removal of Rhodamine B in the absence of illumination. Furthermore, the adsorption activity of the products exhibited only a slight decrease after three successive cycles. The results demonstrate that the ternary nanocomposites could be used as a high-efficiency adsorbent for the removal of environmental contaminants.     

Morphology,crystal structure and hydration of calcined and modified anhydrite

The effects of calcination and modification on the morphology （shapes and textures） and crystal structure of anhydrite powders were studied. The results show that, calcination at 100℃ causes anhydrite to disintegrate into smaller crystals, accompanied by a slight in- crease in d-spacing. Without calcination and modification, the solidification time and curing time of anhydrite are 15 and 77 h, respectively. After the treatment, however, the solidification time and curing time are shortened significantly to 9.5 and 14 rain, respectively. The com- pressive and flexural strengths of hydration products made from the treated anhydrite reach 10.2 and 2.0 MPa, respectively. The much shorter solidification and curing time make it possible to use anhydrite as a building and construction material.     

Production of HfO2 thin films using different methods： chemical bath deposition,SILAR and sol-gel process

Hafnium oxide thin films （HOTFs） were successfully deposited onto amorphous glasses using chemical bath deposition, successive ionic layer absorption and reaction （SILAR）, and sol-gel methods. The same reactive precursors were used for all of the methods, and all of the films were annealed at 300℃ in an oven （ambient conditions）. After this step, the optical and structural properties of the films produced by using the three different methods were compared. The structures of the films were analyzed by X-ray diffTaction （XRD）. The optical properties are investigated using the ultraviolet-visible （UV-VIS） spectroscopic technique. The film thickness was measured via atomic force microscopy （AFM） in the tapping mode. The surface properties and elemental ratios of the films were investigated and measured by scanning electron microscopy and energy-dispersive X-ray spectroscopy （EDX）. The lowest transmittance and the highest reflectance values were observed for the films produced using the SILAR method. In addition, the most intense characteristic XRD peak was observed in the diffraction pattern of the film produced using the SILAR method, and the greatest thickness and average grain size were calculated for the film produced using the SILAR method. The films produced using SILAR method contained fewer cracks than those produced using the other methods. In conclusion, the SILAR method was observed to be the best method for the production of HOTFs.     

Effects of sintering temperature on the microstructural evolution and wear behavior of WCp reinforced Ni-based coatings

This article focuses on the microstructural evolution and wear behavior of 50wt%WC reinforced Ni-based composites prepared onto 304 stainless steel substrates by vacuum sintering at different sintering temperatures. The microstructure and chemical composition of the coatings were investigated by X-ray diffraction （XRD）, differential thermal analysis （DTA）, scanning and transmission electron microscopy （SEM and TEM） equipped with energy-dispersive X-ray spectroscopy （EDS）. The wear resistance of the coatings was tested by thrust washer testing. The mechanisms of the decomposition, dissolution, and precipitation of primary carbides, and their influences on the wear resistance have been discussed. The results indicate that the coating sintered at 1175℃ is composed of fine WC particles, coarse M6C （M=Ni, Fe, Co, etc.） carbides, and discrete borides dispersed in solid solution. Upon increasing the sintering temperature to 1225℃, the microstructure reveals few incompletely dissolved WC particles trapped in larger M6C, Cr-rich lamellar M23C6, and M3C2 in the austenite matrix. M23C6 and M3C2 precipitates are formed in both the γ/M6C grain boundary and the matrix. These large-sized and lamellar brittle phases tend to weaken the wear resistance of the composite coatings. The wear behavior is controlled simultaneously by both abrasive wear and adhesive wear. Among them, abrasive wear plays a major role in the wear process of the coating sintered at 1175℃, while the effect of adhesive wear is predominant in the coating sintered at 1225℃.     

Large-scale two-dimensional nonlinear FE analysis on PGA amplification effect with depth and focusing effect of Fuzhou Basin

Based on the explicit finite element（FE） method and platform of ABAQUS,considering both the inhomogeneity of soils and concave-convex fluctuation of topography,a large-scale refined two-dimensional（2D） FE nonlinear analytical model for Fuzhou Basin was established.The peak ground motion acceleration（PGA） and focusing effect with depth were analyzed.Meanwhile,the results by wave propagation of one-dimensional（1D） layered medium equivalent linearization method were added for contrast.The results show that：1） PGA at different depths are obviously amplified compared to the input ground motion,amplification effect of both funnel-shaped depression and upheaval areas（based on the shape of bedrock surface） present especially remarkable.The 2D results indicate that the PGA displays a non-monotonic decreasing with depth and a greater focusing effect of some particular layers,while the 1D results turn out that the PGA decreases with depth,except that PGA at few particular depth increases abruptly; 2） To the funnel-shaped depression areas,PGA amplification effect above 8 m depth shows relatively larger,to the upheaval areas,PGA amplification effect from 15 m to 25 m depth seems more significant.However,the regularities of the PGA amplification effect could hardly be found in the rest areas; 3） It appears a higher regression rate of PGA amplification coefficient with depth when under a smaller input motion; 4） The frequency spectral characteristic of input motion has noticeable effects on PGA amplification tendency.     

Free clustering optimal particle probability hypothesis density（PHD） filter

As to the fact that it is difficult to obtain analytical form of optimal sampling density and tracking performance of standard particle probability hypothesis density（P-PHD） filter would decline when clustering algorithm is used to extract target states,a free clustering optimal P-PHD（FCO-P-PHD） filter is proposed.This method can lead to obtainment of analytical form of optimal sampling density of P-PHD filter and realization of optimal P-PHD filter without use of clustering algorithms in extraction target states.Besides,as sate extraction method in FCO-P-PHD filter is coupled with the process of obtaining analytical form for optimal sampling density,through decoupling process,a new single-sensor free clustering state extraction method is proposed.By combining this method with standard P-PHD filter,FC-P-PHD filter can be obtained,which significantly improves the tracking performance of P-PHD filter.In the end,the effectiveness of proposed algorithms and their advantages over other algorithms are validated through several simulation experiments.