Highly Stretchable Metallic Nanowire Networks Reinforced by the Underlying Randomly Distributed Elastic Polymer Nanofibers via Interfacial Adhesion Improvement

On‐skin electronics require conductive, porous, and stretchable materials for a stable operation with minimal invasiveness to the human body. However, porous elastic conductors that simultaneously achieve high conductivity, good stretchability, and durability are rare owing to the lack of proper design for good adhesion between porous elastic polymer and conductive metallic networks. Here, a simple fabrication approach for porous nanomesh‐type elastic conductors is shown by designing a layer‐by‐layer structure of nanofibers/nanowires (NFs/NWs) via interfacial hydrogen bonding. The as‐prepared conductors, consisting of Ag NWs and polyurethane (PU) NFs, simultaneously achieve high conductivity (9190 S cm^?1), high stretchability (310%), and good durability (82% resistance increase after 1000 cycles of deformation at 70% tensile strain). The direct contact between the Ag NWs enables the high conductivity. The synergistic effect of the layer‐by‐layer structure and good adhesion between the Ag NWs and the PU NFs enables good mechanical properties. Furthermore, without any adhesive gel/tape, the conductors can be utilized as breathable strain sensors for precise joint motion monitoring, and as breathable sensing electrodes for continuous electrophysiological signal recording.     

Binary Synergistic Sensitivity Strengthening of Bioinspired Hierarchical Architectures based on Fragmentized Reduced Graphene Oxide Sponge and Silver Nanoparticles for Strain Sensors and Beyond

Recently, stretchable electronics have been highly desirable in the Internet of Things and electronic skins. Herein, an innovative and cost‐efficient strategy is demonstrated to fabricate highly sensitive, stretchable, and conductive strain‐sensing platforms inspired by the geometries of a spiders slit organ and a lobsters shell. The electrically conductive composites are fabricated via embedding the 3D percolation networks of fragmentized graphene sponges (FGS) in poly(styrene‐block‐butadiene‐block‐styrene) (SBS) matrix, followed by an iterative process of silver precursor absorption and reduction. The slit‐ and scale‐like structures and hybrid conductive blocks of FGS and Ag nanoparticles (NPs) provide the obtained FGS–Ag‐NP‐embedded composites with superior electrical conductivity of 1521 S cm^?1, high break elongation of 680%, a wide sensing range of up to 120% strain, high sensitivity of ≈10⁷ at a strain of 120%, fast response time of ≈20 ms, as well as excellent reliability and stability of 2000 cycles. This huge stretchability and sensitivity is attributed to the combination of high stretchability of SBS and the binary synergistic effects of designed FGS architectures and Ag NPs. Moreover, the FGS/SBS/Ag composites can be employed as wearable sensors to detect the modes of finger motions successfully, and patterned conductive interconnects for flexible arrays of light‐emitting diodes.     

Anticorrosive,Ultralight, and Flexible Carbon‐Wrapped Metallic Nanowire Hybrid Sponges for Highly Efficient Electromagnetic Interference Shielding

Metal‐based materials with exceptional intrinsic conductivity own excellent electromagnetic interference (EMI) shielding performance. However, high density, corrosion susceptibility, and poor flexibility of the metal severely restrict their further applications in the areas of aircraft/aerospace, portable and wearable smart electronics. Herein, a lightweight, flexible, and anticorrosive silver nanowire wrapped carbon hybrid sponge (Ag@C) is fabricated and employed as ultrahigh efficiency EMI shielding material. The interconnected Ag@C hybrid sponges provide an effective way for electron transport, leading to a remarkable conductivity of 363.1 S m^?1 and superb EMI shielding effectiveness of around 70.1 dB in the frequency range of 8.2–18 GHz, while the density is as low as 0.00382 g cm^?3, which are among the best performances for electrically conductive sponges/aerogels/foams by far. More importantly, the Ag@C sponge surprisingly exhibits super‐hydrophobicity and strong corrosion resistance. In addition, the hybrid sponges possess excellent mechanical resilience even with a large strain (90% reversible compressibility) and an outstanding cycling stability, which is far better than the bare metallic aerogels, such as silver nanowire aerogels and copper nanowire foams. This strategy provides a facile methodology to fabricate lightweight, flexible, and anticorrosive metal‐based sponge for highly efficient EMI shielding applications.     

Roll‐to‐Roll Production of Transparent Silver‐Nanofiber‐Network Electrodes for Flexible Electrochromic Smart Windows

Electrochromic smart windows (ECSWs) are considered as the most promising alternative to traditional dimming devices. However, the electrode technology in ECSWs remains stagnant, wherein inflexible indium tin oxide and fluorine‐doped tin oxide are the main materials being used. Although various complicated production methods, such as high‐temperature calcination and sputtering, have been reported, the mass production of flexible and transparent electrodes remains challenging. Here, a nonheated roll‐to‐roll process is developed for the continuous production of flexible, extralarge, and transparent silver nanofiber (AgNF) network electrodes. The optical and mechanical properties, as well as the electrical conductivity of these products (i.e., 12 Ω sq^?1 at 95% transmittance) are comparable with those AgNF networks produced via high‐temperature sintering. Moreover, the as‐prepared AgNF network is successfully assembled into an A4‐sized ECSW with short switching time, good coloration efficiency, and flexibility.     

Fully Integrated Design of a Stretchable Solid‐State Lithium‐Ion Full Battery

A solid‐state lithium‐ion battery, in which all components (current collector, anode and cathode, electrolyte, and packaging) are stretchable, is introduced, giving rise to a battery design with mechanical properties that are compliant with flexible electronic devices and elastic wearable systems. By depositing Ag microflakes as a conductive layer on a stretchable carbon–polymer composite, a current collector with a low sheet resistance of ≈2.7 Ω □^?1 at 100% strain is obtained. Stretchable electrodes are fabricated by integrating active materials with the elastic current collector. A polyacrylamide–“water‐in‐salt” electrolyte is developed, offering high ionic conductivity of 10^?3 to 10^?2 S cm^?1 at room temperature and outstanding stretchability up to ≈300% of its original length. Finally, all these components are assembled into a solid‐state lithium‐ion full cell in thin‐film configuration. Thanks to the deformable individual components, the full cell functions when stretched, bent, or even twisted. For example, after stretching the battery to 50%, a reversible capacity of 28 mAh g^?1 and an average energy density of 20 Wh kg^?1 can still be obtained after 50 cycles at 120 mA g^?1, confirming the functionality of the battery under extreme mechanical stress.     

Printable Superelastic Conductors with Extreme Stretchability and Robust Cycling Endurance Enabled by Liquid‐Metal Particles

Stretchable conductors are vital and indispensable components in soft electronic systems. The development for stretchable conductors has been highly motivated with different approaches established to address the dilemma in the conductivity and stretchability trade‐offs to some extent. Here, a new strategy to achieve superelastic conductors with high conductivity and stable electrical performance under stretching is reported. It is demonstrated that by electrically anchoring conductive fillers with eutectic gallium indium particles (EGaInPs), significant improvement in stretchability and durability can be achieved in stretchable conductors. Different from the strategy of modulating the chemical interactions between the conductive fillers and host polymers, the EGaInPs provide dynamic and robust electrical anchors between the conductive fillers. A superelastic conductor which can achieve a high stretchability with 1000% strain at initial conductivity of 8331 S cm^?1 and excellent cycling durability with about eight times resistance change (compared to the initial resistance at 0% strain before stretching) after reversibly stretching to 800% strain for 10 000 times is demonstrated. Applications of the superelastic conductor in an interactive soft touch device and a stretchable light‐emitting system are also demonstrated, featuring its promising applications in soft robotics or soft and interactive human–machine interfaces.     

In situ synthesis of thermochemically reduced graphene oxide conducting nanocomposites

Highly conductive reduced graphene oxide (GO) polymer nanocomposites are synthesized by a well-organized in situ thermochemical synthesis technique. The surface functionalization of GO was carried out with aryl diazonium salt including 4-iodoaniline to form phenyl functionalized GO (I-Ph-GO). The thermochemically developed reduced GO (R-I-Ph-GO) has five times higher electrical conductivity (42,000 S/m) than typical reduced GO (R-GO). We also demonstrate a R-I-Ph-GO/polyimide (PI) composites having more than 10(4) times higher conductivity (~1 S/m) compared to a R-GO/PI composites. The electrical resistances of PI composites with R-I-Ph-GO were dramatically dropped under ~3% tensile strain. The R-I-Ph-GO/PI composites with electrically sensitive response caused by mechanical strain are expected to have broad implications for nanoelectromechanical systems.     

High Conductivity and Electron‐Transfer Validation in an n‐Type Fluoride‐Anion‐Doped Polymer for Thermoelectrics in Air

Air‐stable and soluble tetrabutylammonium fluoride (TBAF) is demonstrated as an efficient n‐type dopant for the conjugated polymer ClBDPPV. Electron transfer from F^? anions to the π‐electron‐deficient ClBDPPV through anion–π electronic interactions is strongly corroborated by the combined results of electron spin resonance, UV–vis–NIR, and ultraviolet photoelectron spectroscopy. Doping of ClBDPPV with 25 mol% TBAF boosts electrical conductivity to up to 0.62 S cm^?1, among the highest conductivities that have been reported for solution‐processed n‐type conjugated polymers, with a thermoelectric power factor of 0.63 µW m^?1 K^?2 in air. Importantly, the Seebeck coefficient agrees with recently published correlations to conductivity. Moreover, the F^?‐doped ClBDPPV shows significant air stability, maintaining the conductivity of over 0.1 S cm^?1 in a thick film after exposure to air for one week, to the best of our knowledge the first report of an air‐stable solution‐processable n‐doped conductive polymer with this level of conductivity. The result shows that using solution‐processable small‐anion salts such as TBAF as an n‐dopant of organic conjugated polymers possessing lower LUMO (lowest unoccupied molecular orbital), less than ?4.2 eV) can open new opportunities toward high‐performance air‐stable solution‐processable n‐type thermoelectric (TE) conjugated polymers.     

A Biodegradable and Stretchable Protein‐Based Sensor as Artificial Electronic Skin for Human Motion Detection

Due to the natural biodegradability and biocompatibility, silk fibroin (SF) is one of the ideal platforms for on‐skin and implantable electronic devices. However, the development of SF‐based electronics is still at a preliminary stage due to the SF film intrinsic brittleness as well as the solubility in water, which prevent the fabrication of SF‐based electronics through traditional techniques. In this article, a flexible and stretchable silver nanofibers (Ag NFs)/SF based electrode is synthesized through water‐free procedures, which demonstrates outstanding performance, i.e., low sheet resistance (10.5 Ω sq^?1), high transmittance (>90%), excellent stability even after bending cycles >2200 times, and good extensibility (>60% stretching). In addition, on the basis of such advanced (Ag NFs)/SF electrode, a flexible and tactile sensor is further fabricated, which can simultaneously detect pressure and strain signals with a large monitoring window (35 Pa–700 kPa). Besides, this sensor is air‐permeable and inflammation‐free, so that it can be directly laminated onto human skins for long‐term health monitoring. Considering the biodegradable and skin‐comfortable features, this sensor may become promising to find potential applications in on‐skin or implantable health‐monitoring devices.     

In situ fabrication of platinum/graphene composite shell on polymer microspheres through reactive self-assembly and in situ reduction

We present a simple method to fabricate a uniform-sized graphene–metal–polymer composite microsphere of core–shell structure. On the surface of amine-functionalized polymer microsphere, graphene oxide (GO) sheets were affixed to give a core–shell structure by self-assembly process followed by the immobilization of platinum (Pt) ions to the assembled GO shell. Subsequently, they were chemically reduced in situ converting both GO and Pt ions to reduced GO (RGO) and Pt nanoparticles (NPs), respectively. As a result, a robust RGO-Pt composite shell, composed of RGO sheets and well-distributed Pt NPs, was fabricated on the microsphere surface. Meanwhile, the insulative GO shell was converted to the conductive RGO-Pt shell giving 24.0 S m^?1 of electrical conductivity. We demonstrated that the electrical property of the shell was significantly improved by the incorporation of Pt NPs.     

Soft but Powerful Artificial Muscles Based on 3D Graphene–CNT–Ni Heteronanostructures

Bioinspired soft ionic actuators, which exhibit large strain and high durability under low input voltages, are regarded as prospective candidates for future soft electronics. However, due to the intrinsic drawback of weak blocking force, the feasible applications of soft ionic actuators are limited until now. An electroactive artificial muscle electro‐chemomechanically reinforced with 3D graphene–carbon nanotube–nickel heteronanostructures (G–CNT–Ni) to improve blocking force and bending deformation of the ionic actuators is demonstrated. The G–CNT–Ni heteronanostructure, which provides an electrically conductive 3D network and sufficient contact area with mobile ions in the polymer electrolyte, is embedded as a nanofiller in both ionic polymer and conductive electrodes of the ionic actuators. An ionic exchangeable composite membrane consisting of Nafion, G–CNT–Ni and ionic liquid (IL) shows improved tensile modulus and strength of up to 166% and 98%, respectively, and increased ionic conductivity of 0.254 S m^?1. The ionic actuator exhibits enhanced actuation performances including three times larger bending deformation, 2.37 times higher blocking force, and 4 h durability. The electroactive artificial muscle electro‐chemomechanically reinforced with 3D G–CNT–Ni heteronanostructures offers improvements over current soft ionic actuator technologies and can advance the practical engineering applications.     

Boosting the Heat Dissipation Performance of Graphene/Polyimide Flexible Carbon Film via Enhanced Through‐Plane Conductivity of 3D Hybridized Structure

The development of materials with efficient heat dissipation capability has become essential for next‐generation integrated electronics and flexible smart devices. Here, a 3D hybridized carbon film with graphene nanowrinkles and microhinge structures by a simple solution dip‐coating technique using graphene oxide (GO) on polyimide (PI) skeletons, followed by high‐temperature annealing, is constructed. Such a design provides this graphitized GO/PI (g‐GO/PI) film with superflexibility and ultrahigh thermal conductivity in the through‐plane (150 ± 7 W m^‐1 K^‐1) and in‐plane (1428 ± 64 W m^‐1 K^‐1) directions. Its superior thermal management capability compared with aluminum foil is also revealed by proving its benefit as a thermal interface material. More importantly, by coupling the hypermetallic thermal conductivity in two directions, a novel type of carbon film origami heat sink is proposed and demonstrated, outperforming copper foil in terms of heat extraction and heat transfer for high‐power devices. The hypermetallic heat dissipation performance of g‐GO/PI carbon film not only shows its promising application as an emerging thermal management material, but also provides a facile and feasible route for the design of next‐generation heat dissipation components for high‐power flexible smart devices.     

Amorphous Red Phosphorus Embedded in Sandwiched Porous Carbon Enabling Superior Sodium Storage Performances

The red P anode for sodium ion batteries has attracted great attention recently due to the high theoretical capacity, but the poor intrinsic electronic conductivity and large volume expansion restrain its widespread applications. Herein, the red P is successfully encapsulated into the cube shaped sandwich‐like interconnected porous carbon building (denoted as P@C‐GO/MOF‐5) via the vaporization–condensation method. Superior cycling stability (high capacity retention of about 93% at 2 A g^?1 after 100 cycles) and excellent rate performance (502 mAh g^?1 at 10 A g^?1) can be obtained for the P@C‐GO/MOF‐5 electrode. The superior electrochemical performance can be ascribed to the successful incorporation of red P into the unique carbon matrix with large surface area and pore volume, interconnected porous structure, excellent electronic conductivity and superior structural stability.     

Quantum‐Confined‐Superfluidics‐Enabled Moisture Actuation Based on Unilaterally Structured Graphene Oxide Papers

The strong interaction between graphene oxides (GO) and water molecules has trigged enormous research interest in developing GO‐based separation films, sensors, and actuators. However, sophisticated control over the ultrafast water transmission among the GO sheets and the consequent deformation of the entire GO film is still challenging. Inspired from the natural “quantum‐tunneling‐fluidics‐effect,” here quantum‐confined‐superfluidics‐enabled moisture actuation of GO paper by introducing periodic gratings unilaterally is reported. The folded GO nanosheets that act as quantum‐confined‐superfluidics channels can significantly promote water adsorption, enabling controllable and sensitive moisture actuation. Water‐adsorption‐induced expansion along and against the normal direction of a GO paper is investigated both theoretically and experimentally. Featuring state‐of‐the‐art of ultrafast response (1.24 cm^?1 s^?1), large deformation degree, and complex and predictable deformation, the smart GO papers are used for biomimetic mini‐robots including a creeping centipede and a smart leaf that can catch a living ladybug. The reported method is simple and universal for 2D materials, revealing great potential for developing graphene‐based smart robots.     

A flexible conductive hybrid elastomer for high-precision stress/strain and humidity detection

Flexible and environment-responsive materials are essential for a large number of applications from artificial skin to wearable devices. The present study develops a flexible, ultra-low cost conductive hybrid elastomer(CHE), which possesses high responsive capabilities to stress/strain and humidity. CHE was composed of polydimethylsiloxane(PDMS) and starch hydrogel(SH), enabling great elasticity(56 kPa),high conductivity(10~(-2)S/m) and high sensitivity to external stimuli(gauge factor of CHE under stress and strain are 0.71 and 2.22, respectively, and sensitivity to humidity is 1.2 × 10~(-6)S/m per RH%). These properties render CHE a promising candidate for artificial skin and wearable electronics applications of continuously monitoring environmental information.     

Nanomanufacturing of RGO‐CNT Hybrid Film for Flexible Aqueous Al‐Ion Batteries

A highly electrically conductive film‐type current collector is an essential part of batteries. Apart from the metal‐based current collectors, lightweight and highly conductive carbon materials such as reduced graphene oxide (RGO) and carbon nanotubes (CNTs) show great potential as current collectors. However, traditional RGO manufacturing usually requires a long time and high energy, which decreases the product yielding rate and manufacturing efficiency. Moreover, the performance of the manufactured RGO needs to be further improved. In this work, CNT and GO are evenly mixed into GO‐CNT, which can be directly reduced into RGO‐CNT by Joule heating at 2936 K within less than 1 min. The fabricated RGO‐CNT achieves a high electrical conductivity of 2750 S cm^?1, and realizes a 10⁶‐fold increase. The assembled flexible aqueous Al‐ion battery with RGO‐CNT as the current collector exhibits impressive electrochemical performance in terms of superior cycling stability and exceptional rate capability, and excellent mechanical ability regarding the tolerance to mechanical damage such as bending, folding, piercing, and cutting without detrimental consequences.     

Anatase Mesoporous TiO2 Nanofibers with High Surface Area for Solid‐State Dye‐Sensitized Solar Cells

Mesoporous nanofibers (NFs) with a high surface area of 112 m²/g have been prepared by electrospinning technique. The structures of mesoporous NFs and regular NFs are characterized and compared through scanning electron microscope (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and selected area electron diffraction (SAED) studies. Using mesoporous TiO₂ NFs as the photoelectrode, solid‐state dye‐sensitized solar cells (SDSCs) have been fabricated employing D131 as the sensitizer and P3HT as the hole transporting material to yield an energy conversion efficiency (η) of 1.82%. A J_sc of 3.979 mA cm^?2 is obtained for mesoporous NF‐based devices, which is 3‐fold higher than that (0.973 mA cm^?2) for regular NF‐based devices fabricated under the same condition (η = 0.42%). Incident photon‐to‐current conversion efficiency (IPCE) and dye‐desorption test demonstrate that the increase in J_sc is mainly due to greatly improved dye adsorption for mesoporous NFs as compared to that for regular NFs. In addition, intensity modulated photocurrent spectroscopy (IMPS) and intensity modulated photovoltage spectroscopy (IMVS) measurements indicate that the mesopores on NF surface have very minor effects on charge transport and collection. Initial aging test proves good stability of the fabricated devices, which indicates the promise of mesoporous NFs as photoelectrode for low‐cost SDSCs.     

Electroactive Ionic Soft Actuators with Monolithically Integrated Gold Nanocomposite Electrodes

Electroactive ionic gel/metal nanocomposites are produced by implanting supersonically accelerated neutral gold nanoparticles into a novel chemically crosslinked ion conductive soft polymer. The ionic gel consists of chemically crosslinked poly(acrylic acid) and polyacrylonitrile networks, blended with halloysite nanoclays and imidazolium‐based ionic liquid. The material exhibits mechanical properties similar to that of elastomers (Young's modulus ≈ 0.35 MPa) together with high ionic conductivity. The fabrication of thin (≈100 nm thick) nanostructured compliant electrodes by means of supersonic cluster beam implantation (SCBI) does not significantly alter the mechanical properties of the soft polymer and provides controlled electrical properties and large surface area for ions storage. SCBI is cost effective and suitable for the scaleup manufacturing of electroactive soft actuators. This study reports the high‐strain electromechanical actuation performance of the novel ionic gel/metal nanocomposites in a low‐voltage regime (from 0.1 to 5 V), with long‐term stability up to 76 000 cycles with no electrode delamination or deterioration. The observed behavior is due to both the intrinsic features of the ionic gel (elasticity and ionic transport capability) and the electrical and morphological features of the electrodes, providing low specific resistance (<100 Ω cm^?2), high electrochemical capacitance (≈mF g^?1), and minimal mechanical stress at the polymer/metal composite interface upon deformation.     

Palm‐Sized Ag+ Ion Emission Gun Operated at Room Temperature in Non‐Vacuum Atmosphere

Ion implantation is an effective method for changing surface properties and inducing various functionalities. However, a high vacuum is generally necessary for ion implantation, which limits the range of applications. Here, we describe a palm‐sized Ag⁺ ion emission gun produced using a solid electrolyte. AgI–Ag₂O–B₂O₃ glass, known as a super‐ion‐conducting glass, has a Ag⁺ ion conductivity higher than 5 × 10^?3 S cm^?1 at room temperature. In addition, the melted glass has suitable viscous flow, and a sharp glass‐fiber emitter with a pyramid‐like apex can be obtained. Ag⁺ ion emission is observed from the tip of the glass fiber at accelerating voltages corresponding to electric fields above 20 kV cm^?1, even at room temperature in a non‐vacuum atmosphere. Ag nanoparticles of size 50–350 nm are precipitated on a Si target substrate. Other glass components such as boron and iodine are not detected. Electrochemical quartz crystal microbalance (EQCM) measurements show that the mass of Ag nanoparticles estimated from the emission current using Faraday's law of electrolysis is in good agreement with that estimated from the QCM frequency shift.

     

Mechanically Robust Gel Polymer Electrolyte for an Ultrastable Sodium Metal Battery

Sodium dendrite growth is responsible for short circuiting and fire hazard of metal batteries, which limits the potential application of sodium metal anode. Sodium dendrite can be effectively suppressed by applying mechanically robust electrolyte in battery systems. Herein, a composite gel polymer electrolyte (GPE) is designed and fabricated, mainly consisting of graphene oxide (GO) and polyvinylidene fluoride‐hexafluoropropylene (PVDF‐HFP). With the addition of an appropriate amount of GO content, the compressive Young's modulus of 2 wt% GO+PVDF‐HFP (2‐GPH) composite GPE is greatly enhanced by a factor of 10, reaching 2.5 GPa, which is crucial in the suppression of sodium dendrite growth. As a result, uniform sodium deposition and ultralong reversible sodium plating/stripping (over 400 h) at high current density (5 mA cm^?2) are achieved. Furthermore, as evidenced by molecular dynamics simulation, the GO content facilitates the sodium ion transportation, giving a high ionic conductivity of 2.3 × 10^?3 S cm^?1. When coupled with Na₃V₂(PO₄)₃ cathode in a full sodium metal battery, a high initial capacity of 107 mA h g^?1 at 1 C (1 C = 117 mA g^?1) is recorded, with an excellent capacity retention rate of 93.5% and high coulombic efficiency of 99.8% after 1100 cycles.