High‐Performance Biscrolled MXene/Carbon Nanotube Yarn Supercapacitors

Yarn‐shaped supercapacitors (YSCs) once integrated into fabrics provide promising energy storage solutions to the increasing demand of wearable and portable electronics. In such device format, however, it is a challenge to achieve outstanding electrochemical performance without compromising flexibility. Here, MXene‐based YSCs that exhibit both flexibility and superior energy storage performance by employing a biscrolling approach to create flexible yarns from highly delaminated and pseudocapacitive MXene sheets that are trapped within helical yarn corridors are reported. With specific capacitance and energy and power densities values exceeding those reported for any YSCs, this work illustrates that biscrolled MXene yarns can potentially provide the conformal energy solution for powering electronics beyond just the form factor of flexible YSCs.     

High‐Performance Two‐Ply Yarn Supercapacitors Based on Carbon Nanotube Yarns Dotted with Co3O4 and NiO Nanoparticles

Yarn supercapacitors are promising power sources for flexible electronic applications that require conventional fabric‐like durability and wearer comfort. Carbon nanotube (CNT) yarn is an attractive choice for constructing yarn supercapacitors used in wearable textiles because of its high strength and flexibility. However, low capacitance and energy density limits the use of pure CNT yarn in wearable high‐energy density devices. Here, transitional metal oxide pseudocapacitive materials NiO and Co₃O₄ are deposited on as‐spun CNT yarn surface using a simple electrodeposition process. The Co₃O₄ deposited on the CNT yarn surface forms a uniform hybridized CNT@Co₃O₄ layer. The two‐ply supercapacitors formed from the CNT@Co₃O₄ composite yarns display excellent electrochemical properties with very high capacitance of 52.6 mF cm^?2 and energy density of 1.10 μWh cm^?2. The high performance two‐ply CNT@Co₃O₄ yarn supercapacitors are mechanically and electrochemically robust to meet the high performance requirements of power sources for wearable electronics.     

A Solid‐State Fibriform Supercapacitor Boosted by Host–Guest Hybridization between the Carbon Nanotube Scaffold and MXene Nanosheets

Fiber‐shaped supercapacitors with improved specific capacitance and high rate capability are a promising candidate as power supply for smart textiles. However, the synergistic interaction between conductive filaments and active nanomaterials remains a crucial challenge, especially when hydrothermal or electrochemical deposition is used to produce a core (fiber)–shell (active materials) fibrous structure. On the other hand, although 2D pseudocapacitive materials, e.g., Ti₃C₂T _x (MXene), have demonstrated high volumetric capacitance, high electrical conductivity, and hydrophilic characteristics, MXene‐based electrodes normally suffer from poor rate capability owing to the sheet restacking especially when the loading level is high and solid‐state gel is used as electrolyte. Herein, by hosting MXene nanosheets (Ti₃C₂T _x ) in the corridor of a scrolled carbon nanotube (CNT) scaffold, a MXene/CNT fiber with helical structure is successfully fabricated. These features offer open spaces for rapid ion diffusion and guarantee fast electron transport. The solid‐state supercapacitor based on such hybrid fibers with gel electrolyte coating exhibits a volumetric capacitance of 22.7 F cm⁻³ at 0.1 A cm⁻³ with capacitance retention of 84% at current density of 1.0 A cm⁻³ (19.1 F cm⁻³), improved volumetric energy density of 2.55 mWh cm⁻³ at the power density of 45.9 mW cm⁻³, and excellent mechanical robustness.     

Large‐Stroke Electrochemical Carbon Nanotube/Graphene Hybrid Yarn Muscles

Artificial muscles are reported in which reduced graphene oxide (rGO) is trapped in the helical corridors of a carbon nanotube (CNT) yarn. When electrochemically driven in aqueous electrolytes, these coiled CNT/rGO yarn muscles can contract by 8.1%, which is over six times that of the previous results for CNT yarn muscles driven in an inorganic electrolyte (1.3%). They can contract to provide a final stress of over 14 MPa, which is about 40 times that of natural muscles. The hybrid yarn muscle shows a unique catch state, in which 95% of the contraction is retained for 1000 s following charging and subsequent disconnection from the power supply. Hence, they are unlike thermal muscles and natural muscles, which need to consume energy to maintain contraction. Additionally, these muscles can be reversibly cycled while lifting heavy loads.     

Design of Novel Wearable,Stretchable, and Waterproof Cable‐Type Supercapacitors Based on High‐Performance Nickel Cobalt Sulfide‐Coated Etching‐Annealed Yarn Electrodes

Rapid advances in functional electronics bring tremendous demands on innovation toward effective designs of device structures. Yarn supercapacitors (SCs) show advantages of flexibility, knittability, and small size, and can be integrated into various electronic devices with low cost and high efficiency for energy storage. In this work, functionalized stainless steel yarns are developed to support active materials of positive and negative electrodes, which not only enhance capacitance of both electrodes but can also be designed into stretchable configurations. The as‐made asymmetric yarn SCs show a high energy density of 0.0487 mWh cm^?2 (10.19 mWh cm^?3) at a power density of 0.553 mW cm^?2 (129.1 mW cm^?3) and a specific capacitance of 127.2 mF cm^?2 under an operating voltage window of 1.7 V. The fabricated SC is then made into a stretchable configuration by a prestraining‐then‐releasing approach using polydimethylsiloxane (PDMS) tube, and its electrochemical performance can be well maintained when stretching up to a high strain of 100%. Moreover, the stretchable cable‐type SCs are stably workable under water‐immersed condition. The method opens up new ways for fabricating flexible, stretchable, and waterproof devices.     

3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors

Additive manufacturing (AM) technologies appear as a paradigm for scalable manufacture of electrochemical energy storage (EES) devices, where complex 3D architectures are typically required but are hard to achieve using conventional techniques. The combination of these technologies and innovative material formulations that maximize surface area accessibility and ion transport within electrodes while minimizing space are of growing interest. Herein, aqueous inks composed of atomically thin (1–3 nm) 2D Ti₃C₂T_x with large lateral size of about 8 µm possessing ideal viscoelastic properties are formulated for extrusion‐based 3D printing of freestanding, high specific surface area architectures to determine the viability of manufacturing energy storage devices. The 3D‐printed device achieves a high areal capacitance of 2.1 F cm^?2 at 1.7 mA cm^?2 and a gravimetric capacitance of 242.5 F g^?1 at 0.2 A g^?1 with a retention of above 90% capacitance for 10 000 cycles. It also exhibits a high energy density of 0.0244 mWh cm^?2 and a power density of 0.64 mW cm^?2 at 4.3 mA cm^?2. It is anticipated that the sustainable printing and design approach developed in this work can be applied to fabricate high‐performance bespoke multiscale and multidimensional architectures of functional and structural materials for integrated devices in various applications.     

One‐Step Synthesis of Monodispersed Mesoporous Carbon Nanospheres for High‐Performance Flexible Quasi‐Solid‐State Micro‐Supercapacitors

Cost‐effective synthesis of carbon nanospheres with a desirable mesoporous network for diversified energy storage applications remains a challenge. Herein, a direct templating strategy is developed to fabricate monodispersed N‐doped mesoporous carbon nanospheres (NMCSs) with an average particle size of 100 nm, a pore diameter of 4 nm, and a specific area of 1093 m² g^?1. Hexadecyl trimethyl ammonium bromide and tetraethyl orthosilicate not only play key roles in the evolution of mesopores but also guide the assembly of phenolic resins to generate carbon nanospheres. Benefiting from the high surface area and optimum mesopore structure, NMCSs deliver a large specific capacitance up to 433 F g^?1 in 1 m H₂SO₄. The NMCS electrodes–based symmetric sandwich supercapacitor has an output voltage of 1.4 V in polyvinyl alcohol/H₂SO₄ gel electrolyte and delivers an energy density of 10.9 Wh kg^?1 at a power density of 14014.5 W kg^?1. Notably, NMCSs can be directly applied through the mask‐assisted casting technique by a doctor blade to fabricate micro‐supercapacitors. The micro‐supercapacitors exhibit excellent mechanical flexibility, long‐term stability, and reliable power output.