Dispersion of multiwalled carbon nanotubes in water by lignin

Multiwalled carbon nanotubes (MWCNT) can be stably dispersed in water with small amount of lignin. One-step dispersion in the 20.0 g/L concentration range is achieved at room temperature with excellent electrical properties of MWCNT. Lignin is depicted to act as an anti-static agent.     

Ultrasonication study for suspending single-walled carbon nanotubes in water

A systematic calorimetry-based technique was developed to standardize single-walled carbon nanotube (SWNT) dispersion protocol. Simple calorimetric experiments were performed to benchmark the performance of the ultra-dismembrator. Temperature profiles for the sonication period were utilized to estimate energy input to the system. Energy loss profile was generated for the ultradismembrator in use and a calibration relationship was formulated that could standardize the sonication process. The standardized protocol was used to prepare aqueous SWNT suspensions-sonicating SWNTs in a varied range of input energy (18-100 kJ) in water. SWNT mass fractions suspended for each energy input was accurately measured and the suspended SWNT samples were characterized for morphology, surface potential, cluster size and structure, and chemical functionality using high resolution transmission electron microscopy (HRTEM), electrophoresis, dynamic and static light scattering (DLS/SLS), and Raman spectroscopy. The study demonstrated that suspended mass of SWNTs increased up to 18 kJ of energy input with no further increase upon continued energy input. The physicochemical properties showed similar trend for energy input. The aggregate cluster size, surface potential behavior, as well as the Raman defect properties plateaued after the initial energy input. The significant changes observed were limited to morphological properties, i.e., shorter length, debundled, and sharp edged SWNTs and fractal cluster formation (lower D(f)) with increased input energy.     

Self-assembly of single-walled carbon nanotubes into multiwalled carbon nanotubes in water: molecular dynamics simulations

We report discoveries from a series of molecular dynamics simulations that single-walled carbon nanotubes, with different diameters, lengths, and chiralities, can coaxially self-assemble into multiwalled carbon nanotubes in water via spontaneous insertion of smaller tubes into larger ones. The assembly process is tube-size-dependent, and the driving force is primarily the intertube van der Waals interactions. The simulations also suggest that a multiwalled carbon nanotube may be separated into single-walled carbon nanotubes under appropriate solvent conditions. This study suggests possible bottom-up self-assembly routes for the fabrication of novel nanodevices and systems.     

Separation of single-walled carbon nanotubes by use of ionic liquid-aided capillary electrophoresis

This paper presents a simple, highly efficient method for analyzing single-walled carbon nanotube (SWNT) bundles based on (1) ultrasound-assisted solubilization/dispersion of SWNTs in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, (2) encapsulation of the nanotubes in sodium dodecyl sulfate micelles, and (3) analysis by capillary electrophoresis. The process by which SWNTs disperse in the ionic liquid was studied by Raman spectroscopy. No degradation of SWNTs was observed under mild sonication conditions. The shape and position changes observed in the Raman spectral bands for the nanotubes are ascribed to debundling and interaction with the ionic liquid. Separation of solubilized SWNTs was accomplished by using a 50 mM formic acid solution at pH 2.0 as background electrolyte and a potential of -10 kV. Under these conditions, separation was completed within only 4 min. Eighteen peaks for SWNTs were identified in the analysis of commercial SWNT bundles. The two types of bundles studied exhibited distinct, highly characteristic electrophoretic profiles which could be used to control SWNTs purity.     

Formylation of single-walled carbon nanotubes

We report an improved, elegant method for the covalent formylation of single-wall carbon nanotubes (SWNTs) via formyl transfer from N-formylpiperidine, which could potentially open the gateway for more versatile chemical modification of carbon nanotube (CNT) walls than is possible via other reported functionalisation methods. The formylation reaction does not inflict damage upon the pristine CNT structure, unlike the currently commonly used carboxylation route, and involves much fewer steps, and takes considerably less time, than most other reported routes. The modified SWNTs have been characterised by Raman spectroscopy, ultraviolet-visible-near infrared (UV-vis-NIR) spectroscopy and "covalent tagging" with derivatising groups followed by thermogravimetric analysis-mass spectroscopy (TGA-MS). UV-vis-NIR spectroscopy shows that there is only limited disruption of the intrinsic electronic structure of the SWNTs. This is confirmed from estimates of the extent of functionalisation from TGA-MS, which suggest that it may be as low as 2 atomic per cent.     

Purification of single-walled carbon nanotubes

The discovery of carbon nanotubes (CNTs) created much excitement and stimulated extensive research into the properties of nanometer-scale cylindrical networks. From then on, various methods for the synthesis and characterization of aligned CNTs-both single-walled (SWCNTs) and multi-walled (MWCNTs) by different methods have been hotly pursued. Unfortunately, most methods currently in use produce raw multi component solid products, only a small fraction of which contains carbon nanotubes. The balance of the material is composed of residual catalyst particles (some of which are encased in concentric graphitic shells), fullerenes, other graphitic materials and amorphous carbon. These impurities cause a serious impediment for their detailed characterization and applications. If the carbon nanotube is ever to fulfill its promise as an engineering material, large, high quality aliquots will be required. A number of purification methods involving elimination processes such as physical separation, gas phase and liquid phase oxidation in combination with chemical treatments have been developed for nanotube materials. Though the quantitative determination of purity remains controversial, reported yields are best regarded with an appropriate level of skepticism on the method of assay. In this article, a review is given on the past and recent advances in purification of SWCNTs.     

Identification of endohedral water in single-walled carbon nanotubes by (1)H NMR

Water confinement within single-walled carbon nanotubes (SWCNTs) has been a topic of current interest, due in part to their potential nanofiltration applications. Experiments have recently validated molecular dynamics predictions of flow enhancement within these channels, although few studies have probed the detailed structure and dynamics of water in these systems. Proton nuclear magnetic resonance ( (1)H NMR) is a technique capable of providing some of these details, although care must be exercised in separating the confined water of interest from exterior water. By using controlled experiments with both sealed and opened SWCNTs and by providing a quantitative measure of water content through desorption experiments, a signature for confined water in SWCNTs has been positively identified. This endohedral or interior water is characterized by a relatively broad feature located at 0.0 ppm, shifted upfield relative to bulk water. With the identification of a signature for water inside SWCNTs, further studies aimed at probing water dynamics will be enabled.     

Chemically functionalized water soluble single-walled carbon nanotubes modulate neurite outgrowth

We report the use of chemically-functionalized water soluble single-walled carbon nanotube (SWNT) graft copolymers for modulation of outgrowth of neuronal processes. The graft copolymers were prepared by the functionalization of SWNTs with poly-m-aminobenzene sulphonic acid and polyethylene glycol. When added to the culturing medium, these functionalized water soluble SWNTs were able to increase the length of various neuronal processes.     

A novel method to produce large amount single-walled carbon nanotubes by arc discharging

A new method to produce large quantities of single-walled carbon nanotubes (SWCNTs) with high purity is developed. Using several composite graphite rods containing Y and Ni powder as the anode, and a high purity graphite hemisphere as the cathode, a cloth-like deposit could be obtained by dc arc-discharge in helium at high temperature. The deposit contained about 50% SWCNTs. In this way, more than one gram deposit could be produced in a few minutes. The structure and morphology of the SWCNTs were then examined using transmission electron microscopy, Raman spectroscopy, and thermogravimetric analysis. The article is published in the original.     

Charge-induced strains in single-walled carbon nanotubes

This paper investigates the electromechanical coupling in single-walled carbon nanotubes. In the model system, the extra electric charge of the nanotube is assumed to be uniformly distributed on carbon atoms. The electrostatic interactions between charged carbon atoms are calculated using the Coulomb law. The deformation of the charged nanotube is obtained by using the molecular structural mechanics method and considering the electrostatic interactions as an external loading acting on carbon atoms. The axial strain is found to be a symmetric function of applied charge, and our predictions are in very good agreement with those from ab initio calculations. The present results indicate that the nanotube aspect ratio has a strong effect on the axial strain when the ratio is less than 10 and the general trend is that the strain increases with the aspect ratio. The peak axial and radial strains occur at nanotube diameters of around 1.2-1.5?nm.     

Dispersion of single-walled carbon nanotubes in aqueous and organic solvents through a polymer wrapping functionalization

The processing and application of single-walled carbon nanotubes (SWNTs) is limited by their purity and dispersion in most common solvents. Non-covalent polymer wrapping functionalization of SWNTs provides an excellent route to improve their property and thus the dispersion in aqueous and organic solvents occurred simultaneously. This paper reports the purification and a methodology for obtaining dispersion of SWNTs, obtained by arc-discharge, using a biocompatible water soluble polymer which, presumably, wraps around nanotubes. Scanning electron microscope (SEM) and high resolution transmission electron microscope (HR-TEM) were employed to examine the dispersion. UV-Vis-NIR spectroscopy further substantiates the presence of dispersed SWNTs in aqueous solution. Raman spectroscopy reveals the impact of chemical and ultrasonic processing on the structural order of the nanotubes. No trace for structural damage has been observed from the Raman studies and so, our treatment is considered as a physical rather chemical process. The polymer treated tubes become more hydrophilic which was confirmed by contact angle measurement.     

Carbon fiber nanoelectrodes modified by single-walled carbon nanotubes

Microelectrode voltammetry has been considered to be a powerful technique for single biological cell analysis and brain research. In this paper, we have developed a simple method to get highly sensitive carbon fiber nanoelectrodes (CFNE) modified by single-walled carbon nanotubes (SWNTs) on the basis of our previous work. The electrochemical behavior of SWNTs/CFNE was characterized by potassium ferricyanide, dopamine (DA), epinephrine (E), and norepinephrine (NE) using cyclic voltammetry (CV). Compared with CFNE, SWNTs/CFNE has a much larger available internal surface area per external geometric area, which is supported by SEM images. The modified electrodes show very high sensitivity and favorable electrochemical behavior toward these neurotransmitters. The peak current increases linearly with the concentration of DA, E, and NE in the range of 1.0 x 10(-)(7)-1.0 x 10(-)(4), 3.0 x 10(-)(7)-1.0 x 10(-)(4), and 5.0 x 10(-)(7)-1.0 x 10(-)(4) M, respectively. The CV detection limit (S/N = 3) of DA, E, and NE is 7.7 x 10(-)(9), 3.8 x 10(-)(8), and 4.2 x 10(-)(8) M, respectively. The modified electrode exhibited almost the same electrochemical behavior after 15 days, indicating that SWNTs/CFNE is pretty stable and has good reproducibility.     

单壁碳纳米管束的排布

流体排布法是实现碳纳米管定向排列的一种简单的方法。采用流体排布法在具有浸润性图案化的基底上成功地对单壁碳纳米管(SWNTs)束进行了水平方向上的排布。将SWNTs悬浮液滴入光刻胶制成的微通道中,在流体剪切力作用下,弯曲的SWNTs在一定程度上会被拉伸并且平行地排列在纳米级宽度的微通道中。将排列好的SWNTs阵列转移到一些不同间距的金电极对上面,制作成碳纳米管场效应晶体管(CNTFET)。CNTFET的电性能测试结果表明,制备的SWNTs束可以制造出不同电极间距同时具有良好电性能的CNTFET。     

Band theory of single-walled carbon nanotubes

In this paper, a curvilinear coordinate system is used in space and in k-space to study the energy band of single-walled carbon nanotubes wrapped at a helical angle. Using this method, a general function of the bandgap associated with the radius of the tube and the helical angle is derived based on the tight-binding theory. The three-dimensional hexagonal Brillouin zone of the tube is on the surface of cylinder in the k-space. For two tubes with different diameters, there is a distance between the cylindrical Brillouin zones in the radial direction. The Brillouin zone varies with the radius of the tube and the number of cells on the circumference. For the metallic zigzag tubes, the bandgaps decrease discretely to zero at the corners of the Brillouin zones, and those corners are singular points of zero gaps. With the transformation of coordinates, the metallic zigzag type is proven to be equivalent to an armchair configuration. Electrical characteristics of the chiral effects are briefly highlighted.     

Length-dependent extraction of single-walled carbon nanotubes

A two-phase liquid-liquid extraction process is presented which is capable of extracting water-soluble single-walled carbon nanotubes into an organic phase. The extraction utilizes electrostatic interactions between a common phase transfer agent and the sidewall functional groups on the nanotubes. Large length-dependent van der Waals forces for nanotubes allow the ability to control the length of nanotubes extracted into the organic phase as demonstrated by atomic force microscopy.     

Continued growth of single-walled carbon nanotubes

We demonstrate the continued growth of single-walled carbon nanotubes (SWNTs) from ordered arrays of open-ended SWNTs in a way analogous to epitaxy. Nanometer-sized metal catalysts were docked to the SWNT open ends and subsequently activated to restart growth. SWNTs thus grown inherit the diameters and chirality from the seeded SWNTs, as indicated by the closely matched frequencies of Raman radial breathing modes before and after the growth.     

Ozonolysis of functionalized single-walled carbon nanotubes

Room temperature ozonolysis of fluorinated SWNT and phenyl-sulfonated SWNT have been studied in perfluoropolyether (PFPE) solvents. Etching at the end caps (approximately 70 nm/hour for fluorinated SWNT/PFPE suspension with 1 g/l concentration) has been demonstrated to be the dominating effect during the ozonolysis of fluorinated SWNT. Base on characterization by AFM analysis, X-ray Photoelectron Spectroscopy (XPS) and Raman Spectroscopy, fluorination along the SWNT sidewalls protects F-SWNT from extensive functionalization by ozonolysis. An ozone reaction with fluorinated SWNT has been found to improve its solubility in 96% sulfuric acid. This allows oxidative cutting by ammonium peroxydisulfate without defluorination. In comparison to fluorinated SWNT, phenyl-sulfonated SWNT was found to be effectively and homogeneous cut by ozonolysis in a water suspension.     

Synthesis of single-walled carbon nanotubes by induction thermal plasma

The production of high quality single-walled carbon nanotubes (SWCNTs) on a bulk scale has been an issue of considerable interest. Recently, it has been demonstrated that high quality SWCNTs can be continuously synthesized on large scale by using induction thermal plasma technology. In this process, the high energy density of the thermal plasma is employed to generate dense vapor-phase precursors for the synthesis of SWCNTs. With the current reactor system, a carbon soot product which contains approximately 40 wt% of SWCNTs can be continuously synthesized at the high production rate of ∼100 g/h. In this article, our recent research efforts to achieve major advances in this technology are presented. Firstly, the processing parameters involved are examined systematically in order to evaluate their individual influences on the SWCNT synthesis. Based on these results, the appropriate operating conditions of the induction thermal plasma process for an effective synthesis of SWCNTs are discussed. A characterization study has also been performed on the SWCNTs produced under the optimum processing conditions. Finally, a mathematical model of the process currently under development is described. The model will help us to better understand the synthesis of SWCNTs in the induction plasma process.      

Strengthening and toughening of aluminum by single-walled carbon nanotubes

Effects of single-walled carbon nanotubes (SWNTs) on strengthening and toughening behaviors of aluminum-based composites with grain sizes ranging from nano- to micrometer have been investigated. The strength of composites is enhanced as an increase in SWNT volume and a decrease in grain size. Nanocrystalline composite containing 3.5 vol.% SWNTs exhibits good ductility of ∼5% tensile elongation to failure as well as superior yield stress of ∼600 MPa. However, the strengthening efficiency of SWNTs becomes half of the theoretical prediction for nanocrystalline composites due to the recovery process around the interface. Nanocrystalline composite containing 2.0 vol.% SWNTs shows the fracture toughness of ∼57 MPa mm^1/2, which is five times higher than that of starting aluminum. SWNTs may effectively block the propagation of necks and cracks, providing much improved ductility and toughness.     

RF response of single-walled carbon nanotubes

We present for the first time an in-depth study of the RF response of a single-walled carbon nanotube (SWCNT) rope. Our novel electrode design, based on a tapered coplanar approach, allows for single tube measurements well into the GHz regime, minimizing substrate-related parasitics. From the analysis of the S-parameters, the ac transport mechanism in the range 30 kHz to 6 GHz is established. This work is an essential prerequisite for the fabrication of high-speed devices based on bundles of nanowires or low-dimensional structures.