表面离化源工作参数对离子迁移率谱的影响

根据表面离化过程中样品分子在离化材料表面直接离化的特点,设计了一种样品离化和离子注入一步完成的面-网结构表面离化源.以金属钼为离化材料,三乙胺为测试样品,研究了离化源温度、离子门开门脉冲宽度和高度对离子谱图的影响.结果表明,离子流信号强度随离化温度升高迅速增强但离化源寿命缩短,理想的离化温度约为400℃；增加开门脉冲宽...     

用于水中有机磷农药检测的离子迁移率谱仪预富集进样方法

建立了检测水中有机磷农药的离子迁移率谱仪预富集进样方法。预富集器由表面覆盖有吸附薄膜的微热板、聚四氟乙烯电路板和管座组成,具有操作简单,无需有机溶剂,自加热,热容小,功耗低等优点。以马拉硫磷检测为例,分析了富集器解吸升温速率和离子迁移率谱仪半透膜温度对检测结果的影响。采用高温短时脉冲加热和低温维持加热相结合的解吸方式,既可形成较高的进样浓度脉冲,又可减少进入漂移管的杂质,有利于提高离子迁移率谱仪检测灵敏度。实验表明:采用所述预富集及两阶段加热解吸进样方法,对水中马拉硫磷的检出限为3.9μg/L,达到了国家标准对水中有机磷检测的要求。     

迁移管的电场强度对真空紫外电离-离子迁移谱仪性能的影响

离子迁移管是离子迁移谱仪的核心部分,它用来产生均匀的电场,以使不同迁移率的离子进行分离。本研究以丙酮为例,详细研究了本课题组所研制的真空紫外电离源-离子迁移谱仪中迁移管的电场参数对离子的灵敏度和分辨率的影响,发现电压的增大灵敏度增大,但是分辨率存在一个最佳的电压,这些结果可用于迁移谱的优化设计。     

时间分辨表面增强拉曼光谱(TRSERS)研究硫脲衍生物与ClO4^-的共吸附行为

运用时间分辨表面增强拉曼光谱(TRSERS)结合电位双阶跃的方法, 研究了硫脲衍生物甲基硫脲(MTU)和烯丙基硫脲(ATU)在银电极表面与ClO4^-离子的共吸附行为, SERS强度-时间曲线表明它们各自相应的SERS谱峰强度随电位阶跃的响应速率不同, 离电极表面较近的基团的特征谱峰强度的响应速率较快; MTU以S端且垂直吸附在电极表面,ATU也以S端和表面发生化学吸附, 但整个分子斜躺吸附在电极表面上。     

离子迁移谱技术及其在化学战剂侦检中的应用

简要介绍离子迁移谱的基本原理、离子迁移率理论,以及离子迁移谱仪的最新研究进展;阐述了离子迁移谱技术在化学战剂侦检中的应用,如在神经性毒剂、糜烂性毒剂方面的应用。     

离子迁移谱仪快速鉴别当归

当归是传统的中药材之一,又称金当归、当归身、当归尾、酒当归、土当归等,为多年生草本植物,全株有特异香气。当归味甘、辛,性温,可以调经止痛、润肠通便、补血活血、也有治疗风湿痹痛和跌扑损伤等的功效。不同产地的当归其药用价值有很大的差异,鉴别当归的产地对研究和应用当归的药理作用具有极重要的意义。离子迁移谱仪(IMS)是一种基于大气压离子化、描述弱电场中离子迁移特性的谱学方法[1]。其     

差分离子迁移谱和迁移时间离子迁移谱联用技术检测化学战剂模拟物

采用平板式差分离子迁移谱(DMS)和迁移时间离子迁移谱(DTIMS)联用技术(DMS-IMS2)对典型化学战剂模拟物甲基膦酸二甲酯(DMMP)和水杨酸甲酯(MS)进行测定。实验结果表明,在载气800 mL/min,DMS射频电压1100 V条件下,DMS-IMS2在DIMS模式能够实现DMMP和MS两种化学战剂模拟物的有效识别和检测。另外,DMS-IMS2能够实现DMMP和MS正、负离子的同时检测,同时获得DMMP和MS的DMS补偿电压(CV)和IMS迁移时间(Td)的二维分离信息,为两种化学战剂模拟物的准确鉴定提供更多的信息。DMS-IMS2具有二维分析能力、可同时分析正负离子、响应速度快、体积小、功耗低等优点,在现场检测中具有广阔的应用前景。     

多束毛细管柱–离子迁移率谱检测环境大气中的苯系物

采用多束毛细管柱–离子迁移率谱(MCC–IMS)系统对环境大气中的苯、甲苯、乙苯、二甲苯和苯乙烯5种苯系物进行快速检测。IMS漂移管温度为80℃,载气和漂移气均为洁净空气,测得苯系物的约化迁移率。苯、甲苯、乙苯、二甲苯和苯乙烯分别在0.20~3.00,0.20~2.00,0.15~1.00,0.25~3.00,0.08~1.00 mg/m~3质量浓度范围内线性良好,线性相关系数均不小于0.96。基于3倍噪声计算,苯、甲苯、乙苯、二甲苯和苯乙烯的检出限分别为0.055,0.023,0.017,0.065和0.013 mg/m~3。MCC–IMS法可快速检测混合样品中5种苯系物,其中苯、甲苯和苯乙烯的定量相对误差分别为5.0%,9.4%,0.2%,测定结果的相对标准偏差分别为2.7%,5.0%,6.7%(n=6)。MCC–IMS的单次测量可在3 min内完成。     

NEWS

离子迁移谱(IMS)基于不同结构和质量的离子在均匀电场中的飞行速度差异实现不同化合物的分离分析,常被用于同分异构体的分离检测。除了独立使用之外,也常与质谱联用,例如在生物样品分析时,离子迁移谱可以显著降低背景噪声、提高检测灵敏度;离子迁移谱还被用作色谱检测器,实现复杂样品(特别是同分异构体)的多维分离。然而,     

NEWS——新型大气压直流辉光放电电离源及其在离子迁移谱中的应用（Ⅰ）

近年来,离子迁移谱（ion mobility spectrometry,IMS）被广泛地应用于爆炸物、毒品、化学战剂以及环境与大气污染物的实时在线监测。它具有分析速度快、灵敏度高、能量损耗低、易实现便携等突出优点。离子源是离子迁移谱仪的关键部件之一。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.