四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

PHOTOCHEMISTRY OF QUINOLYLMETHYLISOTHIORONIUM SALTS. GUANINE SELECTIVE DNA PHOTOCLEAVAGE REAGENTS

Quinolylmethylisothioronium salts (1a and 4a) cleave DNA upon irradiation. The cleavage is more than 10-fold enhanced by piperidine treatment and subsequently shows a high preference for guanines. Photolysis of 1a, 2a and 4a in water at lambda greater than 300 nm resulted in photoheterolysis. Irradiation of 1a in 2-propanol gave only products from photohomolysis, irradiation of 1a in methanol and 2a and 4a in 2-propanol resulted in products from both photoheterolysis and photohomolysis. Quantum yields for the disappearance of 1a in water and 2-propanol were determined. The presence or absence of oxygen had no effect in water, whereas oxidation products were observed upon irradiation in methanol and 2-propanol in the presence of oxygen. The guanine specific DNA photoreaction is proposed to take place by alkylation at N7 via the quinolylmethyl carbocation and thus to represent a photoalkylation.     

Modeling of the pseudo-colloids migration for multi-member decay chains with a arbitrary flux boundary condition in a fractured porous medium

A deep geologic disposal is the prime option for the long-term isolation of high-level radioactive waste (HLW) in many countries. For deeply located repositories, a radionuclide released from a failed waste container moves through the engineered and natural barriers before it reaches a biosphere. The pseudo-colloid which a radionuclide is adsorbed on a moving natural humic or fulvic colloid can be generated in a fractured porous medium. The size of a colloid is in general in the order of a hundred nanometer so that its migration velocity in a fracture is higher than that of a radionuclide due to the hydrochromatic effect. A large colloid cannot diffuse easily into a surrounding rock. Also, there are many kinds of actinides and these actinides have decay chains. In this analysis, the canonical form solution is derived for a pseudo-colloid and a solute in a fracture and a surrounding rock with a realistic inlet boundary condition with multi-member decay chains. It is used the Fortran based a computational code which uses a special subroutine for the inversion of Laplace transform. Consequently, the role of the pseudo-colloid in the fractured porous medium is important and also their decay chains aren’t neglected in the performance assessment of the HLW.     

Regularities of binary condensation of vapors when one of them is undersaturated

Simple analytical expressions are derived for the stationary concentration of a binary solution in a markedly supercritical droplet growing exothermically in diffusion or free-molecular regimes in mixed vapors when one of condensing vapors is supersaturated and present in a small amount and another vapor is slightly undersaturated and present in a large amount. The condensation of sulfuric acid and water vapors on a droplet under the conditions of Earth atmosphere is considered as an example of practical importance. Under isothermic conditions, analytical expressions are obtained for the time of establishing a power law for variations in a droplet radius with time under the diffusion and free-molecular regimes of the droplet growth. The power laws are derived in an explicit form under these regimes, which describe the rapid establishment of a stationary concentration of a solution in a growing droplet.     

Fast choice of separation conditions for analyses by capillary zone electrophoresis using an information system Xemic

An information system Xemic applicable in analytical chemistry is described and its use in capillary electrophoresis for searching suitable separation conditions is demonstrated. This system is capable to provide suitable separation conditions even for analytes for which no electrophoretic experiments have been published so far. The system works with a database of components of anionic character the analyses of which have been performed, published in reviewed scientific journals, and included into a database created by an expert. Moreover, the system learned to search also in abstracts or complete scientific articles to find articles dealing with the determination of a substance in a given sample matrix. When no experiments have been published so far for a defined substance in a specific matrix, Xemic shows the separation conditions for determination of the substance regardless of the matrix. When no response can be found for the analyte of interest at all, the system Xemic works like an expert in the field and searches chemically similar substances and offers a series of substances the physicochemical properties of which are close to the followed analyte with respect to the behavior in the electric field, and shows working conditions for their analysis. Thus, the analyst puts only the order in the form of a given analyte in a given matrix and obtains a recommendation of a separation system that should enable to perform a successful separation. The system is not rigid and enables the operator to change the importance of individual attributes used in similarity search so as to obtain a broader or narrower group of similar components. With a certain probability the analyte of interest can be successfully analyzed under separation conditions that suited for the analysis of the most similar substances in the given matrix.     

Photochromism of mixed crystals containing bisthienyl-, bisthiazolyl-, and bisoxazolylethene derivatives

Single crystals composed of two or three different kinds of diarylethenes, having similar geometrical structures but different colors in the closed-ring isomers, 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (1a), 1,2-bis(5-methyl-2-phenyl- 4-thiazolyl)perfluorocyclopentene (2a), and 1,2-bis(5-methyl-2-phenyl-4-oxazolyl)perfluorocyclopentene (3a) have been prepared in an attempt to form single crystals which exhibit different colors, depending on illumination wavelengths. When 1a and 2a are mixed in ethanol and the content of 2a in the feed is higher than that of 1a, only a needle-shaped crystal is obtained. The crystal shape is similar to that of 2a. On the other hand, high content of 1a in the feed leads to formation of a block-shaped crystal, of which the shape is similar to that of 1a. At a feed ratio of 1:1 for 1a and 2a, two types of crystals such as needle- and block-shapes are obtained from the same batch. Mixed crystals composed of three kinds of derivatives 1a/2a/3a have also been prepared. A crystal composed of the three derivatives in the molar ratio of 32 (1a):53 (2a):15 (3a) was obtained. X-ray analysis proved that 1a and 3a are packed in the crystal lattice of 2a. The mixed crystal 1a/2a/3a changed color from colorless to yellow, red, and blue upon irradiation with light of appropriate wavelengths.     

Polarization curve of partially degraded catalyst layer

A model of a partially degraded catalyst layer (CL) in a fuel cell is reported. The degradation is modeled as a lowering of the exchange current density in a sub-layer at the membrane/CL interface. Degradation of 30 to 40% of the CL thickness may dramatically increase the polarization voltage. At a large current density, the voltage loss in such a two-layer system is close to the loss in a fully degraded CL. Estimates of this effect for a PEMFC cathode and a DMFC anode are performed.     

Real-time monitoring of brain energy metabolism in vivo using microelectrochemical sensors: the effects of anesthesia

Rats were implanted in the striatum with a Pt/Ir electrode for measurement of regional cerebral blood flow (rCBF) (H(2) clearance technique), a carbon paste electrode for monitoring tissue oxygen and a glucose biosensor for monitoring extracellular glucose. Changes in all three parameters were recorded in response to the intraperitoneal (i.p.) administration of the anesthetics chloral hydrate (350 mg/kg), sodium pentobarbitone (60 mg/kg) and ketamine (200 mg/kg). An i.p. injection of normal saline, given as a control for the injection of the anesthetics, produced a parallel increase in rCBF and tissue oxygen accompanied by a brief decrease in extracellular glucose. Changes in tissue oxygen reflected the changes in rCBF; there was a decrease in both after sodium pentobarbitone, a decrease followed by a rebound after ketamine and a transient increase after chloral hydrate. All three anesthetics produced a decrease in extracellular glucose. The disparity between the changes in glucose and the changes in rCBF and oxygen suggests that during anesthesia, the reduction in extracellular glucose is not due to a reduction in the direct delivery of glucose from the blood vascular system. These results also indicate that levels of enzymatic substrates and mediators, which are intrinsic to the design and operation of amperometric biosensors, are clearly altered in a complex manner by anesthesia and suggest that caution should be exercised in extrapolating data from acute anesthetized experiments to normal physiology.     

Study of Viscosity-temperature Properties of Oil and Gas-condensate Mixtures in Critical Temperature Ranges of Phase Transitions

Transport of oil and gas-condensate mixtures of various compositions is found to be accompanied by a slight increase in viscosity in the coldest period when ground temperatures at depth of a condensate pipeline reach 0 – minus 4°С. Fall in temperature of oil fluids under study to minus 10 – minus 30°С is accompanied by a sharp increase in all structural and rheological parameters of the mixture. Even a slight amount of oil added to a gas-condensate mixture causes a significant decrease in viscosity in the negative temperature range. As a result, cloud and pour point of a mixture falls, its amount decreases, the structure of paraffin deposits changes.     

Solvent‐Dependent Self‐Discrimination of Bis(2‐hydroxyphenyl)diamides

Solvent‐dependent, self‐discrimination of diamides is described. Mixing a solution of (R)‐ 1 a and (S)‐ 1 a , which are valine‐derived, bis(2‐hydroxyphenyl)diamide‐bearing, multiple hydrogen‐bonding modules, in dichloromethane immediately led to the formation of a thick suspension comprising a 1:1 heterochiral aggregate of 1 a . The solubility of heterochiral 1 a was substantially lower in halogenated solvents than in ethyl acetate. A perusal of racemic crystal structures obtained from chloroform and ethyl acetate revealed a significant difference in the crystal‐packing pattern, which is likely to be the basis for the pronounced difference in solubility. Specific self‐discrimination of 1 a in an ensemble of eight structurally related molecules showcased the specific aggregation through the hydrogen‐bonding network of the bis(2‐hydroxyphenyl)diamide framework. The low solubility of heterochiral 1 a in halogenated solvent was exploited to achieve high stereoselectivity in a catalytic asymmetric reaction by using a low enantiomeric excess sample of 1 a .     

Conversion of phenylacetonitrile in supercritical alcohols within a system containing small volume of water

The reaction of phenylacetonitrile in supercritical methanol and ethanol in a system containing a small volume of water was studied. The effects of various operating conditions, such as reaction temperature, reaction time, the mole ratio of phenylacetonitrile/water/methanol or ethanol on the product yield were systematically investigated. The optimal yield of methyl phenylacetate for phenylacetonitrile in supercritical methanol in a system containing a small volume of water was 70 % at 583 K and 2.5 h. The optimal yield of ethyl phenylacetate for phenylacetonitrile in supercritical ethanol with a small volume of water was 80 % at 583 K and 1.0 h. At the same time, a feasible mechanism was proposed for phenylacetonitrile in supercritical methanol and ethanol in a system containing a small volume of water.     

Terminal trifluoromethyl-alkoxy and-alkenyloxy nematic liquid crystals for LCDs with active matrix addressing

We have synthesized a new class of compounds suitable for LCD applications, incorporating a trifluoromethyl group in the terminal alkoxy- or alkenyloxy-chain. These compounds appear to fulfil many of the requirements for use in TN-LCDs. Core units containing a cyclohexyl ring, which tend to induce a lower viscosity than that of the analogous aromatic materials, were synthesized. Systems containing several aromatic rings were also prepared with a view to producing compounds of high birefringence. Compounds containing a lateral fluorosubstituent as well as a polar substituent in a terminal position were synthesized in order to generate a high positive value of the dielectric anisotropy. Molecules incorporating a bicyclo[2.2.2]octane ring were also synthesized in order to produce a high nematic clearing point and to influence the elastic constants. Compounds with three 1,4-disubstituted rings were synthesized with a view to producing materials with a high nematic clearing point and as low a melting point as possible. A series of compounds with a carbon-carbon double bond in the terminal chain was prepared in an attempt to produce compounds with appropriate values and ratios of the elastic constants.     

Study of the direct detection of crosslinks in hydrocarbons by 13C-NMR. I. Preparation and characterization of model compound 1,1,2,2-tetra(tridecyl) ethane

The present series of papers is the commencement of a study aimed at the direct detection and quantification of crosslinking in hydrocarbons with the ultimate objective of a precise study of radiation-induced crosslinking in polyethylene. The subject of the present paper is the synthesis of a model compound containing a crosslink in a well-defined position sufficiently remote from the chain ends to be representative of an average crosslink in polyethylene. Such a compound in the form of 1,1,2,2-tetra(tridecyl) ethane has been synthetized and isolated in pure form in the course of the present work. Melting points and x-ray spacings of the new compound have been determined, and a comparison with the corresponding linear paraffins has been made. Effects are noted relating to the influence of molecular shape on the GPC elution volume, in which context an observation on a cyclic paraffin is also quoted.     

Electrostatic-interaction-induced phase separation in solutions of flexible-chain polyelectrolytes

A model of a polyelectrolyte solution has been formulated on the basis of the formalism of the thermodynamic perturbation theory. Macromolecules have been described in terms of the model of a flexible chain with an excluded volume and a variable electrical charge. During construction of the thermodynamic perturbation theory, a set of three independent subsystems—polyelectrolyte macromolecules placed in a structureless charge background of counterions, counterions placed in a structureless charge background of macromolecules, and Coulomb gas ions of a low-molecular-mass salt—has been taken as the reference system. In the framework of this model, liquid-liquid phase separation due to strong correlation-induced attraction has been predicted. The behavior of the degree of ionization over a wide monomer concentration range, including the region of phase separation either in a salt-free solution or in the presence of univalent ions of a low-molecular-mass salt in the solution, has been studied. It has been shown that macromolecules in the coexisting phases should have different degrees of ionization. The occurrence of phase separation under normal conditions in the case when dimethylformamide is taken as a solvent and the nonoccurrence of this phase separation in the case of aqueous solutions of flexible-chain polyelectrolytes are predicted.     

Quantification of the effect of nonphotochemical quenching on the determination of in vivo chl a from phytoplankton along the water column of a freshwater reservoir

Nonphotochemical quenching (NPQ) is a well-known collection of different photoprotective mechanisms of plants and algae to avoid photodamage under an excess of light energy. In order to evaluate the overall effect of NPQ processes on the fluorometric determination of in vivo Chl a from a phytoplankton community dominated by diatoms, we compared the results obtained by two different fluorometric field devices with the total concentration of extracted Chl a measured by HPLC ( in vitro Chl a ). A different set of measurements were made to assess the performance of these fluorometers at high, moderate and low irradiance conditions. The Fbbe fluorometer, which is capable of distinguishing different algal groups according to their pigment content, allowed a better determination of in vivo Chl a under high irradiance conditions, with only a 10% mean difference from the in vitro Chl a concentration. In turn, the FMII fluorometer underestimated by as much as 50% the in vitro Chl a concentration under the same light conditions. As data from both fluorometers were in accordance with the in vitro Chl a values at moderate irradiance levels, the differences observed at high irradiances were attributed to the decrease in the yield of Chl a fluorescence caused by photoprotective NPQ processes. Accordingly, we estimated the effect of NPQ processes on the in vivo Chl a determination and the results allow us to provide an equation to correct this effect when in situ fluorometric measurements are carried out under high irradiance regimes. Our results demonstrate that under certain circumstances NPQ seriously compromises the results obtained by in situ fluorometric probes and highlight the need for a cautious interpretation of field data under such environmental conditions.     

Prevention of evaporation of small-volume sample solutions for capillary electrophoresis using a mineral-oil overlay.

The suppression of evaporation of water from small volumes of sample solutions or reagents for capillary electrophoresis by the use of a mineral-oil overlay was investigated in affinophoresis applications, in which the affinity constant of a mutant protein of recombinant human galectin-1 to a lactose affinophore, a triply negative charged ion having a lactoside as an affinity ligand, was determined. When an injection was carried out from a minimum of 20 microL of an aqueous solution beneath the oil overlay, no oil contamination inside the capillary was observed, provided the capillary was cleanly cut so that the end was flat, and the polyimide coating had been removed for a distance of about 2 mm from the end. Affinophoresis was carried out using 20 microL of an affinophore solution covered with an oil overlay. The abnormalities in the electropherograms as the result of the evaporation of the water from the solution during storage prior to use in an automatic operation of a capillary electrophoresis instrument were suppressed, with respect to the formation of a base line gap, an increase in the detection time of a marker ion and an increase in the initial current. A solution in a vial could be used repeatedly for a longer period of time when overlaid with mineral oil than in the absence of an overlay. The use of a mineral-oil overlay is a simple but very efficient technique for solving the problem of the evaporation of water from small volumes of aqueous solutions for use in capillary electrophoresis.     

Modeling of interface phenomena in liquid under vibration, using the chemical model

An analysis of interface phenomena in a liquid under a vibration field is presented, based on the chemical model of vibration in a liquid. The objects studied are a bubble, a solid surface, and a linear macromolecule, in a vibrated liquid. It is concluded that many sonochemical phenomena can be realized in some different (two or more) mechanisms, and mutually stimulate. Inharmonic effects and the influence of distant neighbors are analyzed.     

Guest-induced assembly of tetracarboxyl-cavitand and tetra(3-pyridyl)-cavitand into a heterodimeric capsule via hydrogen bonds and CH-halogen and/or CH-pi interaction: control of the orientation of the encapsulated guest

The guest- or solvent-induced assembly of a tetracarboxyl-cavitand 1 and a tetra(3-pyridyl)-cavitand 2 into a heterodimeric capsule 1.2 in a rim-to-rim fashion via four intermolecular CO(2)H.N hydrogen bonds has been investigated both in solution and in the solid state. In the (1)H NMR study, a 1:1 mixture of1a and 2a (R = (CH(2))(6)CH(3)) in CDCl(3) gave a mixture of various complicated aggregates, whereas this mixture in CDCl(2)CDCl(2) or p-xylene-d(10) exclusively produced the heterodimeric capsule 1a.2a. It was found that an appropriate 1,4-disubstituted-benzene is a suitable guest for inducing the exclusive formation of 1a.2a in CDCl(3). The ability of a guest to induce the formation of guest-encapsulating heterodimeric capsule, guest@(1a.2a), increased in the order p-ethyltoluene < 1-ethyl-4-methoxybenzene < or = 1-ethyl-4-iodobenzene < or = 1,4-dibromobenzene < 1-iodo-4-methoxybenzene < or= 1,4-dimethoxybenzene < or = 1,4-diiodobenzene. The (1)H NMR study revealed that a CH-halogen interaction between the inner protons of the methylene-bridge rims (-O-H(out)CH(in)-O-) of the 1a and 2a units and the halogen atoms of 1,4-dihalobenzenes and a CH-pi interaction between the methoxy protons of 1,4-dimethoxybenzene and the aromatic cavities of the 1a and 2a units play important roles in the formation of 1,4-dihalobenzene@(1a.2a) and 1,4-dimethoxybenzene@(1a.2a), respectively. A preliminary single-crystal X-ray diffraction analysis of guest@(1b.2b) (R = (CH(2))(2)Ph; guest = 1-iodo-4-methoxybenzene or p-xylene) confirmed that the guest encapsulated in 1b.2b is oriented with the long axis of the guest along the long axis of 1b.2b and that the iodo and the methoxy groups of the encapsulated 1-iodo-4-methoxybenzene are specifically oriented with respect to the cavities of the 2b and 1b units, respectively.