基于FPGA的有色Petri网仿真系统设计

为了实现大规模有色Petri网模型的性能测试,设计了基于FPGA的高速仿真系统。该系统实现了库所、变迁模块到硬件结构的映射,采用C语言实现了有色Petri网的硬件自动生成工具。通过分析有色Petri网的特征,该工具生成对应的Verilog代码和基于Quartus的自动脚本。以通信中"包传输"的模型为例,在FPGA中对生成的代码进行测试,验证了设计的正确性。     

控制电路基于Petri网元件的图形化设计与仿真研究

Petri网是异步并发系统建模的重要工具,正越来越多地被应用在超大规模集成电路之中,从系统的Petri网模型直接获得相应的逻辑电路是许多学者研究的目标.文章在通用的EDA软件中,使用硬件描述语言建立Petri网元件,并给出了它们的源代码.对于Petri网中的C/E系统,变迁用组合逻辑电路实现,库所用时序逻辑电路实现;而对于P/T系统,为了减少连线,库所和它的输入、输出变迁一起组成一个元件.在对一个受控系统建立了控制器的Petri网模型后,通过调用元件库中的Petri网元件,绘制控制器的Petri网图,经编译、仿真、优化、适配、下载在CLPD或FPGA中,就可获得控制器.Petri网元件与其它电路元件可混合使用,这为控制器的设计与实现提供了一种新的有效途径.文章分别给出了C/E系统和P/T系统的实例,仿真结果表明基于Petri网元件的图形化设计方法的正确性.     

同步Petri网的仿真及硬件实现

基于现有的EDA技术,针对同步Petri网和硬件描述语言的关联性,提出了用VHDL语言对同步Petri网进行描述并实现.首先使用同步Petri网对控制器进行建模,然后使用VHDL语言对同步Petri网控制模型进行描述,最终在EDA软件Max+ PlusII中进行编译、仿真和适配,并下栽到FPGA中,通过实验开发系统GW...     

基于Petri网和Web服务的工作流建模方案

面向Web服务的工作流系统能很好地满足现代企业应用集成和协作的需求，Web服务流程模型的建立是实现Web服务集成的重要环节。Petri网具有形式化的描述的基础和正确性分析的优点。文章将这两方面结合起来．对工作流网中控制流结构进行了分析，给出了由Petri网向WSFL转化的方法，并给出Petri模型中控制流结构的WSFL描述。     

MapReduce的随机Petri网模型研究

首次提出用随机Petri网为MapReduce逻辑模型建立Petri网模型的思想,目的在于采用随机Petri网工作流性质对其进行分析。因此,在研究MapReduce逻辑模型的基础上,为其建立了随机Petri网模型。该随机Petri网模型符合随机Petri网工作流系统的性质,本文利用随机Petri网的工作流系统的性能等价公式,分析了模型的性能,最终求出整个系统的性能参数。该性能参数能够很好地说明MapReduce处理大数据集的优势。     

基于扩展Petri网的雷达组网系统的建模与分析

利用扩展Petri网建立了雷达组网系统模型,通过模型的分析,解决了各雷达之间的同步问题,给出了系统冲突的处理方法,然后将扩展Petri网与排队论结合起来,定量描述了系统的统计性能;最后运用建立的模型进行了仿真实验。研究表明,扩展Petri网是雷达组网系统建模与分析的一种有效途径,为系统的结构优化与效能评估提供了依据。     

基于ARM的嵌入式站间自动闭塞控制器硬件设计

针对铁路信号的高可靠性要求,设计了嵌入式站问自动闭塞系统的体系结构、嵌入式闭塞控制器和控制锁.详细设计了具有冗余特性的控制器硬件、比较电路和安全锁.同时,对本控制器构成的自动站间闭塞系统进行Petri网建模及分析.     

基于同步合成的Petri网基本进程段求解算法

Petri网基本进程段的求取是Petri进程描述的前提和基础，然而直接求取通常是比较困难的。文章研究通过Petri网的同步合成操作求取基本进程段的方法。首先证明了一个结构复杂的Petri网可通过结构简单的S-网的同步合成操作得到，通过分析S-网与合成后的结构复杂网系统基本进程段之间的对应关系。给出了结构复杂Petri网基本进程段的求取算法。     

基于着色赋时面向对象Petri网的AUV系统建模研究

研究并实现一种着色赋时面向对象Petri网(CTOPN)建模方法,它将面向对象技术与着色赋时Petri网相结合,从而综合了两种方法的优势,降低了Petri网模型的复杂性,增加了时间描述,便于系统定量分析.首先给出CTOPN的形式定义,然后建立AUV系统的CTOPN模型,最后给出模型的死锁检测算法,从而验证模型无死锁,为系统仿真创造了条件.     

CIMS软件开发工具：Petri网编辑器的语法分析及其实现

本文给出并发表达式语言的文法，并描述了Petri网编辑器的语法分析过程和中间代码的产生过程。解决了Petri网在计算机中的存贮结构问题，处理了可能会出现的重名变量，实现了从井发表达式语言到安全标号的Petri网的转换工作。     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks     

Call for Papers—Feature Topic,Vol.12,No.7,2015

正Information Centric Networking Information-Centric Networking(ICN) is an emerging direction in Future Internet architecture research,gaining significant tractions among academia and industry.Aiming to replace the conventional host-to-host communication model by a data-centric model,ICN treats data content as the first     

JOURNAL OF ELECTRONICS(CHINA)

正~~     

NEXT GENERATION WIRELESS NETWORKS–ESPECIALLY THE USE OF MILLI-MICROWAVE BANDS

The global bandwidth shortage of wireless communications has motivated the exploration of the naillimeter wave （ram-wave） frequency spectrum for the next generation wireless communications. Recent advances in RF CMOS technology and high speed baseband signal processing technologies have enabled tile extensive research and development of turn-wave wireless communications. The multi gigabit per second data rate of ram-wave system will lead to applications in many important scenarios, such as WPAN, WLAN,back-haul for cellular system. And the frequency bands include 28 GHz, 38 GHz, 45GHz, 60GHz, E-BAND and even beyond 100 GHz. The propagation and the imitation of the RF circuits design in these frequency bands make the directional antennas be inevitable for mm-wave communications.