苯并噻唑类化合物在银上的吸附机理研究

本文利用线性电势扫描的方法研究了几种苯并噻唑类化合物及巯基苯基四氮唑在银上的吸附机理。结果表明:2.巯基苯并噻唑和巯基苯基四氮唑以化学吸附方式,通过分子上巯基与银表面的作用形成分子紧密排列的吸附层。25℃下,PMT可以在银表面形成紧密单层。这种吸附在较高吸附温度下可以转化为多层,且完全覆盖银表面。在含Br^-的溶液中,它可以阻碍Br^-与表面的接触。在较大的浓度下,2-甲基苯并噻唑和苯并噻唑也可以在银表面的某些位置,通过杂环上的S原子(或N原子)形成松散的吸附,但这种吸附层不能完全覆盖银表面。电镜实验也表明以上物质在银表面发生了作用。     

Synthesis,Characterization, and Thermotropic Properties of Liquid Crystals with an Oligo (Ethylene Oxide) Monomethyl Substituent I: Biphenyl-Based Systems

New alkene liquid crystals 4-[oligo(ethylene oxide)_o, monomethylether)carbonyl]phenyl 4-[4(allyloxy) phenyl]benzoate(MBPBEn, n = 1-3), 4′-[oligo(ethylene oxide)_o, monomethylether)carbonyl]biphenyl-4-yl 4-[4-(al1yloxy)phenyl]benzoate(MBPBPEn, n = 1-3), (S)-4-[(2-methyl-I-butoxy)carbonyl]phenyl 4[4-(allyloxy)phenyl]benzoate(MBPBKA), and (S)-4′-[(2-methyl-l-butoxy)carbonyl]biphenyl-4-yl 4-[4(allyloxy)phenyl]benzoate(MBPBPKA) were synthesized and characterized using ¹H-NMR and elemental analysis methods. The thermal transition temperatures, mesomorphic properties, and mesophase textures of these compounds have been determined by differential scanning calorimetry (DSC), by polarizing optical microscopy, and by X-ray diffraction analysis. The effect of changes in chemical structure on the mesophase properties, mesophase and isotropic transition temperatures, and mesophase textures are discussed.     

荧光液晶分子α-氰基二苯乙烯衍生物的合成与光学性质

合成了液晶化合物α-氰基二苯乙烯衍生物(Z)-2-(4-十二烷基氨基苯基)-3-(4-十二烷氧基苯基)丙烯腈（T3）,化合物T3与其同系物(Z)-2-(4-氨基苯基)-3-(4-十二烷氧基苯基)丙烯腈（T2）的浓溶液和固体态在蓝绿光波段均有强的荧光发射。 热重分析数据表明,两个化合物均有好的热稳定性。 利用差式扫描量热分析和偏光显微镜研究了化合物T3的液晶性质,同时借助粉末XRD分析化合物T3的分子间排列方式,表明化合物T3形成近晶相液晶。     

带内取向柔性多醚链苯炔大环合成

采用分子间Glaser半环闭环法合成了带内取向柔性多醚链的苯炔大环.用1H NMR,13C NMR,HRMS,UV及PL(photduminescence)确证了目标大环结构,凝胶色谱测定了目标大环纯度.经偏光显微镜(POM)和差热分析仪(DSC)测试表明大环没有呈现预期的液晶性质,可能是由于环内柔性链过于拥挤,不能形成与环平面共面结构,以至于难于进行有序堆积的缘故.     

Study of chemical processes in the modification of epoxide polymers by aluminum oxide

The processes occurring during the modification of epoxy polymers by various polymorphic aluminum oxide modifications (γ-AlO(OH), γ-Al₂O₃, α-Al₂O₃) with epoxy groups were studied by the methods of IR Fourier spectroscopy, chemical analysis, and differential scanning calorimetry (DSC) by an example of a model compound (phenyl glycidyl ether). Two types of interactions were revealed: a direct chemical reaction of phenyl glycidyl ether with the surface hydroxy groups of alyminum oxide, and phenyl glycidyl ether homopolymerization. By processing by graphical method the data of chemical analysis on the diminishing in amount of epoxy groups in the course of the polycondensation reaction the value of activation energy 106–110 kJ mol⁻¹ of the process of phenyl glycidyl ether interaction with aluminum γ-oxide was determined.     

Influence of cooling rate on the phase transitions of ferroelectric liquid crystals, MBOPDOB and MBOPDoOB

The phase transitions of ferroelectric liquid crystals (FLCs), D-4-(2-methylbutyloxy)phenyl 4-decyloxybenzoate (MBOPDOB) and D-4-(2-methylbutyloxy)phenyl 4-dodecyloxybenzoate (MBOPDoOB), were investigated by means of differential scanning calorimetry (DSC) and polarizing microscopy. The DSC and polarizing microscopy results show that MBOPDOB and MBOPDoOB exhibit different phase transition sequences on slow cooling, whereas they have the same sequence under rapid cooling. In MBOPDoOB, we also observed a quench-induced metastable phase that differs from the normal crystal phase formed by slow cooling. The textures corresponding to the two crystal phases were observed using a polarizing microscope. X-ray diffraction (XRD) was also used to study the quench-induced phase. The influence of the alkoxy chain length on the molecular interactions in FLCs is discussed.     

含三苯基氧磷结构聚芳醚醚酮酮的合成与表征

以苯酚、对二溴苯及苯基磷酰二氯为原料合成出二(4-苯氧基苯基)苯基氧磷(BPOPPO)。 三氯化铝(AlCl₃)为催化剂,通过缩聚反应,BPOPPO与对苯二甲酰氯(TPC)反应制备出一种含有三苯基氧磷结构的聚醚醚酮酮(P-PEEKK)树脂。 采用傅里叶变换红外光谱仪(FT-IR)、差示扫描量热仪(DSC)、热重分析仪(TGA)和广角X射线衍射(WAXD)等技术手段对P-PEEKK树脂的结构和性能进行表征。 结果表明,P-PEEKK树脂属于非晶聚合物,玻璃化转变温度(T_g)较高,为190.5 ℃;热分解温度(T_5%)为515 ℃,耐热性能较好;极限氧指数(LOI)为42,阻燃性能好,为难燃材料;易溶解于氯仿、1,2-二氯乙烷、N,N-二甲基乙酰胺等有机溶剂中,溶解性能较好,便于涂膜加工;拉伸强度为62 MPa,力学性能较好。     

New azobenzene-based natural fatty acid liquid crystals with low melting point: synthesis,DFT calculations and binary mixtures

ABSTRACT

Three new groups of azobenzene liquid crystals named,4-[2-(4-substituted phenyl)diazenyl]phenyl hexdecanoate, 4-[2-(4-substituted phenyl)diazenyl]phenyl octadeca-9-enoate, and 4-[2-(4-substituted phenyl)diazenyl]phenyl octadeca-9,12-dienoate were prepared from naturally occurring fatty acids (palmitic, oleic and linoleic acids). All groups were investigated for their mesophase formation and thermal stability of pure compounds and their binary mixtures by differential scanning calorimetry (DSC), polarised light microscopy (PLM) and thermogravemetric analyses (TGA). Each group contains two compounds that differ from each other by the polar substituent X (CH₃O and Cl) with different number (n) of carbons in the fatty alkyl chains. Molecular structures of the prepared compounds were confirmed via FT-IR, ¹H NMR, C¹³ NMR and elemental analysis. Mesomorphic and thermal properties were investigated. Smectic A phase is the mesophase observed in all of the compounds prepared and their binary mixtures with low melting temperatures. Moreover, DFT calculations were discussed for the prepared compounds. The results revealed that the alkyl chain of the carboxylate part does not significantly affect on the energy difference of the FMOs as well as the thermodynamic parameters. However, the high electronegative Cl substituent has significant effect on the energy difference of the FMOs and decreases the dipole moments of the prepared compounds.     

Phenolic resins bearing maleimide groups: Synthesis and characterization

Novel phenolic novolac resins, bearing maleimide groups and capable of undergoing curing principally through the addition polymerization of these groups, were synthesized by the polymerization of a mixture of phenol and N‐(4‐hydroxy phenyl)maleimide (HPM) with formaldehyde in the presence of an acid catalyst. The polymerization conditions were optimized to get gel‐free resins. The resins were characterized by chemical, spectral, and thermal analyses. Differential scanning calorimetry and dynamic mechanical analysis revealed an unexpected two‐stage curing for these systems. Although the cure at around 275°C was attributable to the addition polymerization reaction of the maleimide groups, the exotherm at around 150 to 170°C was ascribed to the condensation reaction of the methylol groups formed in minor quantities on the phenyl ring of HPM. Polymerization studies of non‐hydroxy‐functional N‐phenyl maleimides revealed that the phenyl groups of these molecules were activated toward an electrophilic substitution reaction by the protonated methylol intermediates formed by the acid‐catalyzed reaction of phenol and formaldehyde. On a comparative scale, HPM was less reactive than phenol toward formaldehyde. The presence of the phenolic group on N‐phenyl maleimide was not needed for its copolymerization with phenol and formaldehyde. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 641–652, 2000     

Synthesis and mesomorphic properties of three- and four-ring liquid crystals containing cyclohexyl, phenyl and pyridyl units

Two series of 4-(3-alkoxycarbonylpyridyl-6-ethynyl)phenyl trans-4-n-alkylcyclohexylcarboxylates and 4-(3-alkoxycarbonylpyridyl-6-ethynyl)phenyl 4-(trans-4-n-alkylcyclohexyl)benzoates have been prepared. Their mesmorphic properties were observed and measured by polarizing optical microscopy and differential scanning calorimetry. The relationship between structures and properties is discussed, showing that the ferroelectric phase can be observed when chiral terminal chains exist.     

Monitoring the Dynamics of Phase Separation in a Polymer Blend by Confocal Imaging and Fluorescence Correlation Spectroscopy

The phase separation of the polymer blend polystyrene/poly(methyl phenyl siloxane) (PS/PMPS) is studied in situ by laser scanning confocal microscopy (LSCM) and by fluorescence correlation spectroscopy (FCS) at macroscopic and microscopic length scales, respectively. It is shown for the first time that FCS when combined with LSCM can provide independent information on the local concentration within the phase‐separated domains as well as the interfacial width.     

Synthesis and Characterization of Liquid Crystal with Lower Temperature of Phase Change of meso-tetra-(4-n-lauroyloxyphenyl)porphyrin

Metalloporphyrincomplexeshavebeenextensivelystudiedinmanyfunctionalchemistrytieldssuchasphoto-eletronicconversionnon-linearoptics,biomimeticstudiesandcatalyticefttcts.TOourknowledge,thefirstliquidcrystallineporphyrinwassynthesizedbyGoodbyelall.In1987,Greggetapreportedthesynthesisandtheliquidcrystallinepropertiesofaseriesofporphyrinoctanolesters.In1987,Greggelal3synthesizedoctakis(0-hydroxyethyl)porphyrin.In1991,tetrakis(4-n-lauroylphenyl)porphyrinwaspreparedbyShimizuetal#.In1994,5.15-disubs…     

Reversible Single Molecular Switch Operating at 300 K on a Surface

A single 4‐pyridylazobenzene molecule is observed at room temperature on a Si(111)‐B surface by using scanning tunnel microscopy. The reversible conformational switching of this molecule is induced by tunneling electrons and observed at room temperature. This process is based on an intramolecular rotation of a single phenyl group without isomerization of the N?N double bond.     

Theoretical simulations of the tip-induced configuration changes of the 4,4(')-diacetyl-p-terphenyl molecule chemisorbed on Si(001)

We have investigated from a theoretical point of view modifications of the 4,4(')-diacetyl-p-terphenyl molecule chemisorbed on Si(001) induced by the scanning tunneling microscope (STM). In previous experiments, these modifications were observed to occur preferentially at the end of the molecule after a +4.0 V voltage pulse and at the center after a +4.5 V voltage pulse. In the framework of ab initio simulations, we have realized a systematic energetic study of the dissociative chemisorption of one, two, or three phenyl rings of the substituted p-terphenyl molecule. Charge densities were then calculated for the investigated configurations and compared to the STM topographies. Before manipulation with the STM tip, the substituted p-terphenyl molecule is preferentially adsorbed without phenyl ring dissociation, allowing a partial rotation of the central phenyl ring. Our results show that the STM induced modifications observed at the end of the molecule might originate from the dissociation of two phenyl rings (one central and one external ring), while the modifications occurring at the central part of the molecule can be interpreted as a dissociation of the two external rings.     

Cellulose acetate blends with acrylonitrile/N-phenyl maleimide copolymers morphological and thermal properties

Cellulose acetate (CA) was blended in different compositions with various acrylonitrile-N-halo phenyl maleimide (AN-XPhM) copolymers to improve the thermal and mechanical properties of cellulose acetate. The structure, morphology, thermal stability, and crystallinity of the blend films were characterized by infrared spectroscopy, scanning electron micrographs, thermogravimetry/differential thermal analysis, differential scanning calorimetry, and X-ray diffraction. The results revealed that the thermal stability was improved by the increase in AN-XPhM content, irrespective of the type of the N-halo phenyl maleimide. The CA/AN-4BrPhM blend films possessed the highest thermal stability compared to the other CA/AN-XPhM blend films. Blending CA with AN-4BrPhM yielded the most homogeneous blend films, irrespective of the composition ratio. The mechanical properties of various compositions of the CA/AN-4BrPhM blend films were also discussed.     

Surface properties of submicrometer silica spheres modified with aminopropyltriethoxysilane and phenyltriethoxysilane

The surface of submicrometer silica spheres are modified with aminopropyl and phenyl groups through a one-step process. Various experimental techniques, i.e., scanning electron microscopy (SEM), quasi-elastic light scattering (QELS), differential scanning calorimetry (DSC), thermogravimetry (TG), zeta potential measurement, nitrogen sorption, and water vapor and organic dye adsorption are used to comprehensively characterize the pure (TEOS particles) and modified silica particles. The SEM micrographs of the particles demonstrate that the modified particles are spherical with uniform size and shape. The particles modified with aminopropyl groups (APTES particles) show the highest isoelectric point (IEP) and the highest weight loss at 780 degrees C because of the basic nature of aminopropyl groups and the higher reactivity of aminopropyltriethoxysilane. The particles modified with the phenyl groups (PhTES particles) show the lowest water vapor adsorption because their surface is more hydrophobic than that of TEOS and APTES particles. The organic dye (brilliant blue FCF or BBF) adsorption experiments demonstrate that the adsorption capacity of the particles increases greatly after acidification. This is caused by the protonation of silanol groups and amine groups on the particle surface, which presents an enhanced electrostatic attraction with BBF anions. The APTES particles exhibit the highest dye adsorption due to the hydrophobic attractions and the enhanced electrostatic attractions from aminopropyl groups.     

Synthesis and characterization of silicon-containing polyamides from aromatic sulfone ether diamines and aromatic organosilicon diacid chlorides

New polymides and copolyamides containing silicon and sulfone ether linkages, soluble in common aprotic solvents and having inherent viscosities of 0.3–0.6 dL/g have been synthesized by solution condensation of bis-(4-chlorocarbonyl phenyl) dimethylsilance (DMSC) and/or bis-(4-chlorocarbonyl phenyl) diphenylsilance (DPSC) with 4,4′-[sulfonylbis-(4,1-phenylenoxy)] bisbenzenamine, 3,3′-[sulfonylbis (4,1-phenyleneoxy)] bisbenzenamine, and bis (4-aminophenyl) ether. These polymers were characterized by infrared spectra, solution viscosity, thermooxidative degradation, differential scanning calorimetry, and x-ray diffraction. These polymers show good thermal stability.     

Preparation of Tin Oxide-Based Metal Oxide Particles

Tin oxide-doped hybrid particles were prepared by a wet chemical process with organic-inorganic (phenyl/silica) hybrid particles in an alcoholic solution. The phenyl/silica hybrid particles, with a diameter of ca. 790 nm were used as a new support material for tin oxide (SnO₂) particles from tin(IV) chloride. The surface of the particles was modified via nitration of aromatic groups in the particles, to promote formation of the tin oxide coating on the particles. The thickness and surface morphology of the tin oxide layer coated on the nitrated-phenyl/silica hybrid particles could be controlled by varying the tin(IV) chloride concentration and reaction time. The size and morphology of the resultant particles were investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The particles obtained were also characterised by infrared (FTIR) and solid-state ¹³C magic angle spinning nuclear magnetic resonance (¹³C-CP/MAS NMR) spectroscopy. The effect of processing parameters on the crystallinity and structure of the doped hybrids were confirmed by X-ray diffraction (XRD) patterns.     

Synthesis and polymerization of new self‐polymerizable quinoxaline monomers

Extended self‐polymerizable poly(phenylquinoxaline) monomer mixtures {i.e.,2‐[4‐(4‐hydroxyphenoxy)phenyl]‐3‐phenyl‐6‐chloroquinoxaline and 3‐[4‐(4‐hydroxy phenoxy)phenyl]‐2‐phenyl‐6‐chloroquinoxaline, 2‐[4‐(4‐hydroxyphenoxy)phenyl]‐3‐phenyl‐6‐fluoroquinoxaline and 3‐[4‐(4‐hydroxyphenoxy)phenyl]‐2‐phenyl‐6‐fluoroquinoxaline, and 2‐(4‐fluorophenyl)‐3‐phenyl‐6‐(4‐hydroxyphenoxy)quinoxaline and 3‐(4‐fluorophenyl)‐2‐phenyl‐6‐(4‐hydroxyphenoxy)quinoxaline} more flexible and nucleophilic than a previously reported monomer mixture [i.e., 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline and 2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline] were synthesized. The monomer mixtures were then polymerized into high‐molecular‐weight polymers. A sample was obtained, through a chlorine displacement reaction, that was a semicrystalline polymer with an intrinsic viscosity of 1.11 dL/g in m‐cresol at 30 ± 0.1 °C and two melting temperatures at 339 and 377 °C in the first differential scanning calorimetry scan. There was a melting temperature at 328 °C without a detectable glass‐transition temperature (T_g) when the sample was subjected to a second differential scanning calorimetry scan. The samples from fluorine displacement reactions were completely amorphous polymers. They had intrinsic viscosities of 0.53–0.90 dL/g in m‐cresol at 30 ± 0.1 °C and T_g's of 220–224 °C. The polymer samples from fluorine displacement reactions were evaluated with gel permeation chromatography and matrix‐assisted laser desorption/ionization time‐of‐flight analyses, which monitored the existence of certain amounts of cyclic oligomers. The thin films of the polymers had room‐temperature tensile strengths of 97–113 MPa, room‐temperature Young's moduli of 2.30–2.35 GPa, and room‐temperature elongations at break of 40–150%. The melt viscosity decreased from 10⁷ to less than 10⁴ Pa s at 310 °C as the frequency was increased from 10^?2 to 10² rad/s. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 78–91, 2005     

Molecular aggregation of disklike benzenetricarboxamides containing diacetylenic groups in bulk and organic solvents

We prepared disklike tris(4-alkylbutadiynylphenyl)-1,3,5-benzenetricarboxamide and tris[4-(4-alkyloxyphenyl)butadiynylphenyl]-1,3,5-benzenetricarboxamide, where three phenyl diacetylenic and diphenyl diacetylenic groups are connected to a benzene ring through amide linkages, respectively. The structures of self-assembled substances were investigated by using transmission electron microscopy, scanning electron microscopy, and X-ray diffraction techniques. All the compounds were highly viscous in melt states, and only compound 9 having three phenyl diacetylenic groups and hexyl tails showed a thermotropic mesophase on cooling. The compound with three diphenyl diacetylenic groups and dodecyloxy tails (13) formed a stable gel in THF/cyclohexane. The IR and X-ray analyses showed that in the gel state molecules were assembled into a rectangular columnar lattice and held each other by hydrogen bondings between amide groups. The compound with tetradecyloxy tails (14) formed stable colloidal particles in cyclohexane. The UV irradiation of 13 in a gel and 14 in a colloidal particle did not result in a long conjugated polymer because of the inappropriate alignment of diacetylenic groups for the topochemical polymerization.