TiO2光催化剂的光谱研究

采用sol-gel法制备了纳米TiO2光催化剂,运用FTIR,FT－Ranam,DSR等光谱技术对催化剂进行了表征,以光催化解油酸作为模型反应考察光催化活性。实验结果表明,催化剂的烧结温度对催化剂的晶相结构、半导体能带结构、光吸收性能及光催化活性均产生显著的影响,当烧结温度为400℃时,TiO2光催化剂具有最好的表观吸光度,最大的吸收带边,以及最佳的光催化活性。     

磁性光催化剂TiO2/Fe3O4的制备和表征

以Fe3O4为磁核,制备了易于分离的磁性光催化剂.采用X射线粉末衍射(XRD)、扫描电镜(SEM)、光电子能谱(XPS)、傅里叶红外光谱(FTIP)等手段表征催化剂的表面形貌、晶型组成、化学结构等.结果表明,TiO2包覆在Fe3O4表面,且包覆较为牢固.利用降解斯蒂酚酸考察其光催化性能,制得的催化剂具有较高的光催化活性和较好的可分离性.     

铁掺杂TiO2/膨润土光催化剂的制备及表征

以溶胶-凝胶法制备了过渡金属铁掺杂的Fe-TiO2/膨润土复合光催化剂,通过XRD、FTIR技术对该系列催化剂的结构进行了表征,并以亚甲基蓝染料废水为模型,考察了紫外光和日光下铁掺杂量对催化剂性能的影响。结果表明,催化剂中有锐钛矿型TiO2生成,铁掺杂TiO2进入了膨润土的蒙脱石层间,改变了蒙脱石层间的有序性,生成了Ti—O—Si键,实现了TiO2粒子与膨润土的复合;适量Fe3+的掺杂降低了TiO2粒子的粒径,并且部分Fe3+还可能进入了TiO2的晶格,形成了缺陷位,拓宽了TiO2的光谱利用范围,提高了光催化活性。     

Improved photocatalytic performance of Pd-doped ZnO

ZnO and Pd-doped ZnO photocatalysts with different molar ratio of Pd/Zn (1/100, 2/100, 3/100 and 4/100) were prepared by a sol-gel method. The photocatalysts prepared were characterized by BET surface area, X-ray diffraction (XRD), UV/vis diffuse reflectance (DRS) and surface photovoltage spectroscopy (SPS), respectively. The results show that doping Pd into ZnO decreases the BET surface area. The XRD spectra of the Pd-doped ZnO catalysts calcined at 773 K show only the characteristic peaks of wurtzite-type. Doping Pd into ZnO increases the absorbance of ZnO in visible region and enhances the photoinduced charge separation rate. The photocatalytic activity of Pd-doped ZnO photocatalysts for decolorization of methyl orange (MO) solution was evaluated, of all the photocatalysts prepared, the Pd-doped ZnO with 3/100 possesses the best photocatalytic activity. The results of further experiments show that increased adsorption ability of light and high separation rate of photoinduced charge carriers all play an important role in promotion of photocatalytic activity of Pd-doped ZnO nanostructure.     

Comparison of catalytic activities for photocatalytic and sonocatalytic degradation of methylene blue in present of anatase TiO2-CNT catalysts

Anatase TiO(2)-CNT catalysts with high specific surface areas were prepared by depositing TiO(2) particles on the surface of carbon nanotubes (CNTs) using a modified sol-gel technique. These catalysts prepared with different amounts of CNTs were characterized by nitrogen adsorption, Fourier Transform infrared (FT-IR) spectroscopy, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), Raman spectroscopy, energy dispersive X-ray (EDX) and ultraviolet-visible (UV-Vis) spectroscopy. The catalytic activity of the anatase TiO(2)-CNT catalysts was assessed by examining the degradation of methylene blue (MB) from model aqueous solutions as a probe reaction under visible light and ultrasonic irradiation. The synergistic effect of the greater surface area and catalytic activities of the composite catalysts was examined in terms of the strong adsorption ability and interphase interaction by comparing the different amounts and roles of CNTs in the catalysts.     

Sonocatalytic degradation and catalytic activities for MB solution of Fe treated fullerene/TiO2 composite with different ultrasonic intensity

Fe-fullerene/TiO(2) composite catalysts were prepared with titanium (IV) n-butoxide (TNB) by a sol-gel method. The samples were characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM), specific surface area (BET), X-ray diffraction analysis (XRD) and energy dispersive X-ray spectroscopy (EDX). The catalytic activities were evaluated by the catalytic oxidation of methylene blue (MB) solution. XRD patterns of the composites showed that the Fe-fullerene/TiO(2) composite contained a typical single and clear anatase phase. The surface properties shown by SEM present a characterization of the texture on Fe-fullerene/TiO(2) composites and showed a homogenous composition in the particles for the titanium sources used. The EDX spectra for the elemental identification showed the presence of C and Ti with strong Fe peaks for the Fe-fullerene/TiO(2) composite. The degradation of MB solution by ultrasonic irradiation in the presence of Fe-fullerene/TiO(2) compounds was investigated in complete darkness. With the increase in the amount of Fe, the degradation rate of methylene blue solution also increased.     

不同干燥法制备纳米TiO2光催化剂的光谱研究

本文分别用常态、超临界乙醇和超临界CO2干燥法干燥钛酸正丁酯的醇凝胶，制备纳米TiO2光催化剂。应用XRD，FTIR，FT－Raman和Fluorescent spectrum(FS)等光谱技术对催化剂进行了表征。以光催化降解罗丹明B为模型反应，比较所得样品光催化活性。实验结果表明，不同干燥方法对催化剂的晶相结构、半导体能带结构、光吸收性能、表面性质及光催化活性均产生显著的影响，用超临界CO2干燥法制备的TiO2光催化剂具有较好的光催化活性。     

Enhanced photocatalytic activity of TiO2 thin film coating on microstructured silicon substrate

Photocatalytic TiO2 thin film is prepared by sol–gel technique on microstructured silicon substrate produced by femtosecond laser cumulative irradiation. The photocatalytic activity is evaluated by the degradation of methylene blue (MB) solution under ultraviolet (UV) irradiation. For 6-ml MB solution with initial concentration of 3.0×10~-5 mol/L, the degradation rate caused by TiO2 thin film of 2-cm~2 area is higher than 70% after 10-h UV irradiation. Microstructured silicon substrate is found to enhance photocatalytic activity of the TiO2 thin film remarkably. The femtosecond laser microstructured silicon substrate is suitable to support TiO2 thin film photocatalysts.     

Pr掺杂TiO2光催化剂的制备及其对酸性品红降解反应的催化性能

以钛酸四丁酯为前躯物,采用溶胶-凝胶法制备了掺杂不同含量Pr的TiO2光催化剂,利用XRD,TG-DTA,AFM,UV-Vis,FTIR等手段对催化剂进行了表征。并通过酸性品红光催化降解实验对其光催化性能进行了评价,考查了实验条件,如催化剂用量,烧结温度,掺杂量等对催化剂催化活性的影响。Pr2O3的掺杂阻碍了TiO2晶相由锐钛矿型向金红石型的转变,使TiO2的粒径减小,比表面积增大,催化活性增强。当Pr掺杂量为0.8%,催化剂用量为0.03g,烧结温度为500℃时,酸性品红的降解率达到97%以上,酸性品红的降解反应为准一级反应。     

室温下超声波辐照制备介孔结构的TiO2及其光催化性能

在室温条件下,利用超声波辐照方法合成了一系列具有大比表面积的介孔结构TiO₂光催化剂。应用N₂-物理吸附、X射线粉末衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)等手段对合成的样品进行了表征。考察了超声波强度、发射时间对TiO₂的结晶度、比表面积、孔体积、孔径等物理结构的影响,并提出了超声波辐照下TiO₂的介孔结构的形成机理。以λ=365 nm的紫外光为光源,评价了该系列催化剂光催化降解染料甲基橙的性能。结果表明超声波功率的增加将增加TiO₂的结晶度和孔径,并使其晶粒发生细化,提高催化剂的分散性。声化学合成的样品具有较高的光催化活性,其主要原因是超声波辐照方法合成的TiO₂具有较高的结晶度和较大的比表面积和孔体积。      

Reactive dye degradation by combined Fe(III)/TiO2 catalyst and ultrasonic irradiation: Effect of Fe(III) loading and calcination temperature

The development of Fe(III)/TiO(2) catalysts for sonocatalytic degradation of Reactive Blue 4 (RB4) dye in water was carried out using sol-gel method. Their surface morphology, phase transformation and surface characteristics were studied using SEM, XRD and surface analyzer, respectively. Phase transformation from amorphous to anatase occurred at 500°C and transformation of anatase to rutile phase occurred at 700°C. Complete rutile phase was formed at 900°C with corresponding increase in the particle size. Increasing in Fe(III) loading led to a reduction in the anatase phase and with the formation of weaker and broader of diffraction peaks. Surface morphology of the prepared catalyst was clearly observed with increasing calcination temperature. Surface area of the prepared catalyst decreased with increasing calcination temperature or increasing Fe(III) loading. The combination of 0.4 mol% of Fe(III)/TiO(2) with ultrasonic irradiation gave the highest sonocatalytic activity in the removal of RB4 from the aqueous solution. On the other hand, the presence of even small amount of rutile inhibited the catalytic activity of catalyst. 1.5 g/L was the optimum amount of catalyst that led to the highest sonocatalytic degradation of RB4 with an efficiency of 90%. Aeration significantly accelerated the reaction rate. Higher removal at 96% could be achieved with the combination of 0.4Fe(III)/TiO(2) and aeration under ultrasonic irradiation.     

Ultrasonic effects on electroorganic processes--Part 20. Photocatalytic oxidation of aliphatic alcohols in aqueous suspension of TiO2 powder

Ultrasonic effects in a suspension system were examined using the photocatalytic oxidation of 2-propanol to acetone and of ethanol to acetaldehyde in the aqueous suspension of TiO2 powder as a model reaction. The formation rate of acetone was significantly increased under ultrasonic irradiation. The oxidation reaction under ultrasonic irradiation was affected in a different manner from that in silence by reaction conditions such as ultrasonic power, stirring speed, amount of TiO2, concentration of 2-propanol, and pretreatment of the TiO2 powder. Furthermore, it was also observed that the particle size of the TiO2 photocatalyst powder was increased due to the particle agglomeration by ultrasonic irradiation, and consequently it was suggested that ultrasound activates the surface of the catalyst. These results are discussed on the basis of not only the activation of the photocatalyst but also ultrasonic enhancement of mass transport of 2-propanol molecules.     

Immobilization of noble metal nanoparticles on the surface of TiO2 by the sonochemical method: photocatalytic production of hydrogen from an aqueous solution of ethanol

Sonochemically prepared Pt, Au and Pd nanoparticles were successfully immobilized onto TiO2 with the assistance of prolonged sonication. Their photocatalytic activities were evaluated in H2 production from aqueous ethanol solutions. Beside the sonochemical method, the conventional impregnation method was also employed to prepare photocatalysts. The sonochemically prepared catalysts showed higher activities than did the conventional ones. Their photocatalytic activities depended on the work functions and the dimensions of supported noble metal nanoparticles. Smaller Pt nanoparticles effectively restricted recombination of electrons and holes and provided H2 at a higher rate.     

纳米金红石TiO2光催化剂的水解合成及其性能

采用水解法在323 K制备了比表面积较大的纳米金红石TiO₂光催化剂,并通过X射线衍射（XRD）、BET比表面积测试法、紫外-可见吸收光谱（UV-Vis）、红外光谱（IR）和光电化学（PEC）测量对纳米光催化剂进行了表征。以甲基橙为光催化反应的模型化合物,在比表面积相近的条件下,对纳米金红石和锐钛矿TiO₂光催化剂的光催化活性进行了评价。光催化实验结果表明：比表面积为～95 m2·g-1时,比表面积相近的金红石和锐钛矿的紫外光催化活性相当, 但金红石的可见光催化活性明显高于锐钛矿的可见光催化活性。光电化学实验表明: 在紫外光照射下催化剂的光电流密度从弱到强的顺序与其紫外光催化活性从低到高的次序一致。     

TiO2 nanosized powders controlling by ultrasound sol-gel reaction

We studied that anatase-TiO2 powders prepared from sol-gel process of titanium tetra-isopropoxide (TTIP) were developed under ultrasonic irradiation with different frequency of 28, 45 and 100 kHz. The irradiated ultrasound (US) was controlled by using semi-cylindrical reflection plate that was placed onto the vicinity of reaction vessel. The focused US influenced the reduction of particles size and increased the surface area of resultant nanosized TiO2 powders. We also examined photodegradation of rhodamine 640 dye (Rh-640) solution by the resultant TiO2 under UV light exposure. It was observed that low frequency for TiO2 photocatalyst preparation and low calcination temperature were more affected onto the photodegradation of the dye.     

双金属/TiO2纳米管复合结构中增强的光电流

将传统半导体材料与金属微纳结构相结合,利用其表面等离激元共振效应,可有效地增强复合结构的光电转换效率,使其广泛地被用于光电化学和光电探测等领域.本文以氧化铝纳米管为模板,采用原子层沉积技术制备出高有序的TiO2纳米管,并通过电子束热蒸发技术在大孔径的纳米管薄膜中分别负载金、铝和双金属金/铝纳米颗粒,形成金属纳米颗粒/TiO2纳米管复合结构.研究结果表明,相对于纯TiO2纳米管,Au/TiO2复合纳米管在568 nm的可见光照射下,其光电流密度约有400%的提高;在365 nm紫外光照射下,Al/TiO2复合纳米管的光电流提高约50%;同时负载双金属Au和Al纳米颗粒的TiO2纳米管在整个紫外-可见光区域光电流均显著增强.     

铂颗粒粒径效应:负载铂纳米颗粒的TiO2薄膜性质研究

制备了负载不同大小Pt纳米颗粒的TiO薄膜。利用TEM测定了Pt粒子的大小,XRD,UV—Vis和测量光电流等方法对TiO2复合膜进行了表征,以亚甲基蓝降解反应评价了Pt／TiO2薄膜的光催化活性。结果表明,在负载相同物质的量的Pt情况下,Pt颗粒的大小直接影响TiO2薄膜的性能,显示较强的粒径效应,当负载平均粒径约5nm的Pt粒子后,薄膜具有最高的光电流和光催化活性。     

Enhancement of catalytic activity in NH3-SCR reaction by promoting dispersibility of CuCe/TiO2-ZrO2 with ultrasonic treatment

A series of CuCe-modified TiO₂-ZrO₂ catalysts synthesized by stepwise impregnation method and ultrasonic-assisted impregnation method were investigated to research the removal of NO in the simulated flue gas. Results showed that the CuCe/TiO₂-ZrO₂ catalyst prepared by ultrasonic-assisted impregnation method exhibited the superior NO conversion, in which higher than 85% NO was degraded at the temperature range of 250–400 °C and the highest NO conversion of 94% at 350 °C. It proves that ultrasonic treatment can markedly improve the performance of catalysts. The effect of ultrasonic enhancement on CuCe/TiO₂-ZrO₂ was comprehensively studied through being characterized by physicochemical characterization. Results reveal that the ultrasonic cavitation effect improves the distribution of active species and the synergistic interaction between Cu with Ce components (Cu⁺ + Ce⁴⁺ ↔ Cu²⁺ + Ce³⁺) on the catalysts significantly, thus resulting in better dispersibility as well as a higher ratio of Cu²⁺ and Ce³⁺ of the catalysts. Moreover, it was found that the CuCe/TiO₂-ZrO₂ catalyst prepared by the ultrasonic-assisted impregnation method represented a higher degree of ultrafine metal particles and evenness. The above results were described with the generalized dimension and singularity spectra in multifractal analysis and validated by the comparative test. Therefore, it can be concluded that ultrasonic treatment facilitates the particle size and distribution of active sites on the catalysts.     

镍锰共掺杂TiO2的制备及其光催化性能研究

采用溶胶-凝胶的方法,镍、锰离子在钛酸丁酯[Ti(OBu)4]水解的条件下掺杂到TiO2中,合成了不同摩尔比的镍、锰离子共掺杂的TiO2光催化剂.通过光催化降解甲基橙实验,对所制备光催化剂的光催化活性进行了考察.结果表明掺杂后的TiO2光催化剂在可见光下对甲基橙能有效地降解,表现出了较好的光催化活性,当镍、锰离子掺杂量...     

Europium-doped mesoporous anatase with enhanced photocatalytic activity toward elimination of gaseous methanol

Mesoporous anatase doped with various amounts of Eu were synthesized via a sol-gel route using Pluronic P123 as template. The XRD and TEM results show that Eu doping favors the formation of anatase with smaller crystal size. The photocatalytic activity of the mesoporous anatase was tested in photocatalytic elimination of gaseous methanol. The photocatalysts exhibited higher activity than that of the commercial photocatalyst (Degussa, P25) under either ultraviolet or visible light irradiation. The superior activity of the mesoporous anatase may be attributed to the synergic effects of the surface area, crystal size and doped Eu species.