热交换器的分类及优缺点分析

热交换器是将不同温度介质之间的热量通过热传导的形式,由高温介质传递给低温介质,使介质达到生产所需温度的工艺设备,也可作为一种节能设备使用.通过对不同热交换器的结构分析,总结不同热交换器的优缺点、适用环境,为生产工艺设计人员及设备制造单位在选择可降低能耗、提高效率的设备上提供参考.     

聚苯胺及其复合物的制备和结构及形貌分析

通过化学氧化法分别制备盐酸,盐酸和十二烷基苯磺酸,碳纳米管(MWNTs-COOH)掺杂的聚苯胺,利用红外光谱,紫外光谱,扫描电子显微镜和透射电子显微镜对所制备聚苯胺的结构和形貌进行分析。分析不同掺杂物对聚苯胺的结构和形貌的影响;同时研究了超声波作用对聚苯胺形貌以及聚苯胺包裹MWNTs-COOH情况的影响。     

Thermodynamic similarity and prediction of the properties and characteristics of substances and processes

Principles of the theory of thermodynamic similarity are considered in application to all aggregate states of a substance, including phase transitions, and to the change in dissipative structures in open systems.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 53, No. 5, pp. 709–716, November, 1987.     

Modelling and computation of curing and damage of thermosets

The curing of thermosets is a complex process involving the transition from a fluid into a (visco-) elastic solid. This phase transition comes along with an increase in stiffness and a volume shrinkage of the polymer. The latter may lead to severe residual strains and stresses, which in turn can cause damage in the final, usually quasi-brittle material. In this contribution a constitutive model is developed which takes into account the curing of a thermosetting material together with the process-induced damage as resulting from curing shrinkage. The curing of the material is governed by a phenomenological hypoelastic constitutive equation which includes temporal evolutions for stiffness and volume shrinkage. Thermal and viscous effects are neglected in the present study. An isotropic gradient-enhanced damage model is adapted to describe the damage evolution. The curing-damage model is implemented into a finite element code and numerical examples for thermosetting materials demonstrate that the proposed model is capable to predict cure-induced damage in thermosets.     

碳化硼陶瓷增韧补强和致密化研究现状及其展望

碳化硼陶瓷具有极高的硬度,然而其低韧性、低抗弯强度、难以致密化限制了它的广泛应用.已有一些研究集中于碳化硼陶瓷增韧补强和致密化,对这一方面国内外研究进展进行了归纳与评述,阐明各种增韧补强和致密化方法的优缺点,提出碳化硼陶瓷增韧补强和致密化研究值得发展的一些方向.     

Measurement and analysis of elastic and anelastic properties of alumina and silicon carbide

Measurements of dynamic Young's modulus, E, and damping as a function of temperature, T, were made for alumina and silicon carbide. The Young's modulus data were compared with some from the literature, and analysed in terms of a theoretical framework relating the Debye temperature, θD, with the elastic constants. For both materials this analysis yielded a ratio T₀/θ_D which was near 0.4, where T₀ is an empirical fitting constant for the plot of (E(0)−E)/T versus 1/T (E(0) is the value of E at 0 K). The analysis of the damping data in terms of an Arrhenius type dependence led to effective activation energies near kT, where k is Boltzmann's constant. This revised version was published online in November 2006 with corrections to the Cover Date.     

Mechanisms of Corosion and Oxidation of Metals and Alloys

Selected topics in field of the study of the mechanisms of corrosion and of oxidation of metals or alloys are presented. The first part reports a new model for the mechanism of the breakaway oxidation of ferritic stainless steels in water vapour. The second part is devoted to the physico‐chemical aspects of oxidation and presents experimental methods useful in the kinetic modelling applied to two alloys, the zircalloy‐4 and an AlMg5 % in the liquid state. In the third part the physical and numerical modelling of the stress corrosion cracking behaviour in face‐centered cubic (fcc) alloys is detailed, which enables the study of the influence of macroscopic parameters (such as the temperature or hydrogen activity) on the fracture process.     

检定和校准证书的异同与应用

本文介绍了检定和校准以及证书的两点相同、五点不同之处,说明了对检定证书和校准证书的正确应用。     

Surface-charge density and potential of coal-liquid mixtures and control of their stability and fluidity

The preparation conditions of concentrated (>70%) aqueous suspensions of coal were optimized, as were the surface charge density and the surface potential of the coal-water suspensions. The theoretical study showed that (1–3) or (2–3) electrolytes such as Na₂SO₄ or Na₅P₃O₁₀, greatly increase the surface charge density and the surface potential of the coal particles in water. This study has led to the interesting result that thinners and stabilizing agents of concentrated clay suspensions, such as lignosulphonates, tripolyphosphates, polynaphtalene sulphonates, etc., must also be good thinners and stabilizing agents for ground coal-water suspensions. Two parameters were controlled: the stability and the fluidity of the suspensions. A penetrometry technique revealed the importance of the resistance coefficient,C _r that can be used as a criterion for the evaluation of coal-water mixture stability and fluidity. Concentrated coal suspensions (about 75% of solid by weight) were prepared in water by using different additives, for instance sodium tripolyphosphate (NaTPP) and surfactants like lignosulphonates (by coupling of the dispersion and stabilizing effects) with the optimum concentration ratio of these two products equal to 1.9. The stability of the suspensions was then greater than 2 months and the viscosity was 1900 cP.     

SARS传染病数学建模及预测预防控制机理研究

首先，利用疾病传播的一般规律及人口守恒统计法则建立了四类人的SARS传染病数学模型，然后运用数学方法对四类人的SARS传染病数学模型进行分析，得出了其生理意义和预防、控制机理。其次，利用人工神经网络理论建立了SARS的预测模型，以北京市的SARS数据为例进行了预测和分析，预测结果显示该模型简单易行，预测精度高。     

SiH4,Si2H6的制备与分离

用Mg2Si制备SiH4必然伴随产生Si2H6.经二级低温冷凝 ,分子筛吸附和恒温恒压汽化等工艺技术过程,能够对两种气体进行最有效的分离 .并且可以制备Si2H6和总杂质含量≤10×10-6,基磷＜0.2×10-9, 基硼＜0.05×10-9的高纯SiH4.     

实验和试验的异同

本文介绍了实验和试验的中文、英文含义,两者的相同和五点不同以及相互关系。     

Photostability and toxicity of pentachlorophenol and phenanthrene

Fate of organic contaminants under UV irradiation as environmental variable was studied. Aqueous solutions of pentachlorophenol and phenanthrene were subjected to simulated solar radiation and monitored during ≤ 93 h. Immobilization tests were conducted using Daphnia magna neonates in pre-irradiated water for the assessment of photoproduct-mediated toxicity. We observed a time-dependent decrease in exposure concentrations following irradiation, which correlated positively with reduced immobilization of the animals. A complete disappearance of the lowest and highest concentrations of pentachlorophenol was noted after 25 h and 75 h, respectively. Survivorship of the animals increased until 100% and correlated positively with irradiation time. However, phenanthrene was rather persistent under irradiation, with less than 25% decline in exposure concentrations after 93 h. Neonates were not immobilized at maximum aqueous solubility of phenanthrene. Rate constants (k) for the photodegradation of pentachlorophenol at 0.41, 0.59, 1.1, and 2.1 mg l(-1) were in the range of 7.2 × 10(-2) and 4.9 × 10(-2)h(-1), showing a slight decrease with increasing initial pentachlorophenol concentration. Nonetheless, pentachlorophenol degradation in the studied concentration range could still be described by the pseudo-first-order kinetics. K values for phenanthrene at 0.12 and 0.22 mg l(-1) were 2.9 × 10(-3)h(-1) and 4.2 × 10(-3)h(-1), respectively.     

Dynamics and stability of unicycles and monocycles

Single-wheel vehicles include the monocycle proposed by Leonardo da Vinci and the more familiar unicycle. Although these vehicles are very simple mechanically, their stability characteristics are complicated and it is believed that they have not been investigated analytically previously. In this paper, a unified analysis applicable to both types of vehicles is presented along with typical calculations and a discussion of their implications     

SMC／BMC的回收与再利用

SMC／BMC废弃物对工业及环境造成了很大影响，指出了SMC／BMC回收再利用的紧迫性。通过对目前国际上SMC／BMC回收再利用的3种典型途径优缺点的对比，参照国外SMC／BMC回收再利用的先进方法，对我国SMC／BMC回收再利用提供了可行的建议．     

浙江省高校教职工体质状况的调查与分析

通过对浙江省7所高校560名教职工健康意识和体育行为的调查问卷以及对他们的体态、机能、素质测试资料的统计分析,表明教职工体质总体尚好,而中年教职工的健康应引起重视.根据这次调查并结合全省情况我们对教职工的体质与健康问题提出了几点建议.     

Preparation and characterization of phosphate and arsenate apatites of strontium and their solid solutions

Samples of phosphate and arsenate apatites of strontium and six of their solid solutions, spread over the entire compositional range, were prepared by a wet method. They were characterized by chemical, X-ray, electron microscopic and infrared analyses. The validity of Vegard's law established the homogeneity of the solid solutions.     

轴承状态监测与诊断系统研究与开发

轴承振动信号监测是机械故障诊断的重要手段,但传统方法无法分析非线性系统的振动信号,文中开发的轴承状态监测与诊断系统以LabVIEW平台为基础,利用分形理论来处理轴承振动信号.实验表明,该系统具有成本低、性能高、扩展性强和诊断准确的特点,能满足工程应用中对轴承状态诊断的要求.