Elastodynamic solution for plane-strain response of functionally graded thick hollow cylinders by analytical method

An elastodynamic solution for plane-strain response of functionally graded thick hollow cylinders subjected to uniformly-distributed dynamic pressures at boundary surfaces is presented. The material properties, except Poisson’s ratio, are assumed to vary through the thickness according to a power law function. To achieve an exact solution, the dynamic radial displacement is divided into two quasi-static and dynamic parts, and for each part, an analytical solution is derived. The quasi-static solution is obtained by means of Euler’s equation, and the dynamic solution is derived using the method of the separation of variables and the orthogonal expansion technique. The radial displacement and stress distributions are plotted for various functionally graded material (FGM) hollow cylinders under different dynamic loads, and the advantages of the presented method are discussed. The proposed analytical solution is suitable for analyzing various arrangements of hollow FGM cylinders with arbitrary thickness and arbitrary initial conditions, which are subjected to arbitrary forms of dynamic pressures distributed uniformly on their boundary surfaces.     

Analysis for the thermoelastic bending of a functionally graded material cylindrical shell

An analytic study for thermoelastic bending of a functionally graded material (FGM) cylindrical shell subjected to a uniform transverse mechanical load and non-uniform thermal loads is presented. Based on the classical linear shell theory, the equations with the radial deflection and horizontal displacement are derived out. An arbitrary material property of the FGM cylindrical shell is assumed to vary through the thickness of the cylindrical shell, and exact solution of the problem is obtained by using an analytic method. For the FGM cylindrical shell with fixed and simply supported boundary conditions, the effects of mechanical load, thermal load and the power law exponent on the deformation of the FGM cylindrical shell are analyzed and discussed.     

均布荷载作用下功能梯度简支梁弯曲的解析解

利用应力函数半逆解法,研究了均布载荷作用下、材料属性在厚度上任意变化的功能梯度简支梁弯曲的解析解,给出了各向应力应变与位移的解析显式表达式.首先根据平面应力状态的基本方程,得出了功能梯度梁的应力函数应满足的偏微分方程,并根据应力边界条件得出了各应力分布的表达式;进而根据功能梯度材料的本构方程和位移边界条件,得出了应变和位移的分布.最后,通过将本文的解退化到均质各向同性梁并与经典弹性解比较,证明了本文理论的正确性,并求解了材料组分呈幂律分布的功能梯度梁的应力和位移分布,分析了上下表层材料的弹性模量比λ与组分材料体积分数指数n对应力和位移分布的影响.     

Magnetothermoelastic stress and perturbation of magnetic field vector in a functionally graded hollow sphere

In this article, a closed-form solution for one-dimensional magnetothermoelastic problem in a functionally graded material (FGM) hollow sphere placed in uniform magnetic and temperature fields subjected to an internal pressure is obtained using the infinitesimal theory of magnetothermoelasticity. Hyper-geometric functions are employed to solve the governing equation. The material properties through the graded direction are assumed to be nonlinear with an exponential distribution. The nonhomogeneity of the material in the radial direction is assumed to be exponential. The temperature, displacement and stress fields and the perturbation of magnetic field vector are determined and compared with those of the homogeneous case. Hence, the effect of inhomogeneity on the stresses and the perturbation of magnetic field vector distribution are demonstrated. The results of this study are applicable for designing optimum FGM hollow spheres.     

Three-dimensional analysis of transient thermal stresses in functionally graded plates

An analytical solution is presented for three-dimensional thermomechanical deformations of a simply supported functionally graded (FG) rectangular plate subjected to time-dependent thermal loads on its top and/or bottom surfaces. Material properties are taken to be analytical functions of the thickness coordinate. The uncoupled quasi-static linear thermoelasticity theory is adopted in which the change in temperature, if any, due to deformations is neglected. A temperature function that identically satisfies thermal boundary conditions at the edges and the Laplace transformation technique are used to reduce equations governing the transient heat conduction to an ordinary differential equation (ODE) in the thickness coordinate which is solved by the power series method. Next, the elasticity problem for the simply supported plate for each instantaneous temperature distribution is analyzed by using displacement functions that identically satisfy boundary conditions at the edges. The resulting coupled ODEs with variable coefficients are also solved by the power series method. The analytical solution is applicable to a plate of arbitrary thickness. Results are given for two-constituent metal-ceramic FG rectangular plates with a power-law through-the-thickness variation of the volume fraction of the constituents. The effective elastic moduli at a point are determined by either the Mori–Tanaka or the self-consistent scheme. The transient temperature, displacements, and thermal stresses at several critical locations are presented for plates subjected to either time-dependent temperature or heat flux prescribed on the top surface. Results are also given for various volume fractions of the two constituents, volume fraction profiles and the two homogenization schemes.     

Elastodynamic solution of a non-homogeneous orthotropic hollow cylinder

A theoretical method for analyzing the axisymmetric plane strain elastodynamic problem of a non-homogeneous orthotropic hollow cylinder is developed. Firstly, a new dependent variable is introduced to rewrite the governing equation, the boundary conditions and the initial conditions. Secondly, a special function is introduced to transform the inhomogeneous boundary conditions to homogeneous ones. By virtue of the orthogonal expansion technique, the equation with respect to the time variable is derived, of which the solution can be obtained. The displacement solution is finally obtained, which can be degenerated in a rather straightforward way into the solution for a homogeneous orthotropic hollow cylinder and isotropic solid cylinder as well as that for a non-homogeneous isotropic hollow cylinder. Using the present method, integral transform can be avoided and it can be used for hollow cylinders with arbitrary thickness and subjected to arbitrary dynamic loads. Numerical results are presented for a non-homogeneous orthotropic hollow cylinder subjected to dynamic internal pressure. The project supported by the National Natural Science Foundation of China (10172075 and 10002016)     

Elastic and viscoelastic solutions to rotating functionally graded hollow and solid cylinders

Analytical solutions to rotating functionally graded hollow and solid long cylinders are developed. Young＇s modulus and material density of the cylinder are assumed to vary exponentially in the radial direction, and Poisson＇s ratio is assumed to be constant. A unified governing equation is derived from the equilibrium equations, compatibility equation, deformation theory of elasticity and the stress-strain relationship. The governing second-order differential equation is solved in terms of a hypergeometric function for the elastic deformation of rotating functionally graded cylinders. Dependence of stresses in the cylinder on the inhomogeneous parameters, geometry and boundary conditions is examined and discussed. The proposed solution is validated by comparing the results for rotating functionally graded hollow and solid cylinders with the results for rotating homogeneous isotropic cylinders. In addition, a viscoelastic solution to the rotating viscoelastic cylinder is presented, and dependence of stresses in hollow and solid cylinders on the time parameter is examined.     

Transient responses of a multilayered spherically isotropic piezoelectric hollow sphere

The dynamic solution of a multilayered spherically isotropic piezoelectric hollow sphere subjected to radial dynamic loads is obtained. By the method of superposition, the solution is divided into two parts: one is quasi-static and the other is dynamic. The quasi-static part is derived by the state-space method, and the dynamic part is obtained by the method of separation of variables coupled with the initial parameter method as well as the orthogonal expansion technique. By using the quasi-static and dynamic parts, the electric boundary conditions as well as the electric continuity conditions, a Volterra integral equation of the second kind with respect to a function of time is derived, which can be solved successfully by means of the interpolation method. The displacements, stresses and electric potentials are finally obtained. The present method is suitable for a multilayered spherically isotropic piezoelectric hollow sphere consisting of arbitrary layers and subjected to arbitrary spherically symmetric dynamic loads. Finally, numerical results are presented and discussed.     

Three-dimensional analytical solution for a rotating disc of functionally graded materials with transverse isotropy

Based on the basic equations for axisymmetric problems of transversely isotropic elastic materials, the displacement components are expressed in terms of polynomials of the radial coordinate with the five involved coefficients, named as displacement functions in this paper, being undetermined functions of the axial (thickness) coordinate. Five equations governing the displacement functions are then derived. It is shown that the displacement functions can be found through progressive integration by incorporating the boundary conditions. Thus a three-dimensional analytical solution is obtained for a transversely isotropic functionally graded disc rotating at a constant angular velocity.The solution can be degenerated into that for an isotropic functionally graded rotating disc. A prominent feature of this solution is that the material properties can be arbitrary functions of the axial coordinate. Thus, the solution for a homogeneous transversely isotropic rotating disc is just a special case that can be easily derived. An example is finally considered for a special functionally graded material, and numerical results shows that the material inhomogeneity has a remarkable effect on the elastic field.     

Thermo-magnetic analysis of thick-walled spherical pressure vessels made of functionally graded materials

This study presents an analytical solution of thermal and mechanical displacements, strains, and stresses for a thick-walled rotating spherical pressure vessel made of functionally graded materials(FGMs). The pressure vessel is subject to axisymmetric mechanical and thermal loadings within a uniform magnetic field. The material properties of the FGM are considered as the power-law distribution along the thickness. Navier's equation, which is a second-order ordinary differential equation, is derived from the mechanical equilibrium equation with the consideration of the thermal stresses and the Lorentz force resulting from the magnetic field. The distributions of the displacement,strains, and stresses are determined by the exact solution to Navier's equation. Numerical results clarify the influence of the thermal loading, magnetic field, non-homogeneity constant, internal pressure, and angular velocity on the magneto-thermo-elastic response of the functionally graded spherical vessel. It is observed that these parameters have remarkable effects on the distributions of radial displacement, radial and circumferential strains, and radial and circumferential stresses.     

Effects of SH waves in a functionally graded plate

A computational method is presented to investigate SH waves in functionally graded material (FGM) plates. The FGM plate is first divided into quadratic layer elements (QLEs), in which the material properties are assumed as a quadratic function in the thickness direction. A general solution for the equation of motion governing the QLE has been derived. The general solution is then used together with the boundary and continuity conditions to obtain the displacement and stress in the wave number domain for an arbitrary FGM plate. The displacements and stresses in the frequency domain and time domain are obtained using inverse Fourier integration. Furthermore, a simple integral technique is also proposed for evaluating modified Bessel functions with complex valued order. Numerical examples are presented to demonstrate this numerical technique for SH waves propagating in FGM plates.     

3D free vibration analysis of a functionally graded piezoelectric hollow cylinder filled with compressible fluid

The free vibration of an arbitrarily thick orthotropic piezoelectric hollow cylinder with a functionally graded property along the thickness direction and filled with a non-viscous compressible fluid medium is investigated. The analysis is directly based on the three-dimensional exact equations of piezoelasticity using the so-called state space formulations. The original functionally graded shell is approximated by a laminate model, of which the solution will gradually approach the exact one when the number of layers increases. The effect of internal fluid can be taken into consideration by imposing a relation between the fluid pressure and the radial displacement at the interface. Analytical frequency equations are derived for different electrical boundary conditions at two cylindrical surfaces. As particular cases, free vibration of multi-layered piezoelectric hollow cylinder and wave propagation in infinite homogeneous cylinder are studied. Numerical comparison with available results is made and dispersion curves predicted from the present three-dimensional analysis are given. Numerical examples are further performed to investigate the effects of various parameters on the natural frequencies.     

轴对称任意梯度圆筒的弹性动力学解

基于轴对称平面应变问题的运动方程及弹性梯度材料的应力和位移关系,通过将圆筒分层使材料性质离散为分段常数函数,同时在时域内应用有限差分格式,求得了材料性质沿径向梯度变化的圆筒弹性动力学解。本文解不仅适合任意梯度的弹性圆筒,而且容易满足多种形式的初始条件和边界条件。通过对材料性质沿径向为连续函数分布和分段函数分布的梯度圆筒数值分析,并与已有文献结果比较,得出本文解与已有文献的解吻合较好,验证了本文解的正确性和有效性。对材料性质为分段函数的三层组合圆筒分析发现,中间功能梯度层的指数分布因子对圆筒的径向位移和应力随时间变化都会产生显著影响。     

Buckling analysis of sandwich plates with FGM face sheets resting on elastic foundation with various boundary conditions: an analytical approach

This paper presents an analytical investigation on the buckling analysis of symmetric sandwich plates with functionally graded material (FGM) face sheets resting on an elastic foundation based on the first-order shear deformation plate theory (FSDT) and subjected to mechanical, thermal and thermo-mechanical loads. The material properties of FGM face sheets are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic material. An analytical approach is used to reduce the governing equations of stability and then solved using an analytical solution which is named as power series Frobenius method for symmetric sandwich plates with six different boundary conditions. A detailed numerical study is carried out to examine the influence of the plate aspect ratio, side-to-thickness ratio, loading type, sandwich plate type, volume fraction index, elastic foundation coefficients and boundary conditions on the buckling response of FGM sandwich plates. This has not been done before and serves to fill the gap of knowledge in this area.     

Boundary element analysis of crack problems in functionally graded materials

The present study examines the crack problems in a functionally graded material (FGM) whose upper and bottom surfaces are fully bonded with dissimilar homogeneous materials. A so-called generalized Kelvin solution based boundary element method is used in the numerical examination. The multi-region method and the eight-node traction-singular boundary elements are used for the crack evaluation. The layer discretization technique is utilized to approximate the depth material non-homogeneity of the FGM layer. The proposed method can deal with any depth variations in both the shear modulus and the Poisson ratio of the FGMs. Results of the present analysis are compared very well with the exact analytical solutions available in the literature, which demonstrates that the proposed method can accurately evaluate the stress intensity factors (SIFs) for cracks in FGMs. The paper further evaluates the effect of the functionally graded variations in the Poisson ratio on the stress intensity factors. The paper also assesses the elliptical cracks in the FGM system. The paper presents the influence of both the non-homogeneity and the thickness of the FGM layer on the three SIFs associated with the elliptical cracks.     

Wave characteristics in functionally graded piezoelectric hollow cylinders

Based on linear three-dimensional piezoelasticity, the Legendre orthogonal polynomial series expansion approach is used for determining the wave characteristics in hollow cylinders composed of the functionally graded piezoelectric materials (FGPM) with open circuit. The displacement and electric potential components, expanded in a series of Legendre polynomials, are introduced into the governing equations along with position-dependent material constants so that the solution of the wave equation is reduced to an eigenvalue problem. Dispersion curves for FGPM and the corresponding non-piezoelectric hollow cylinders are calculated to show the piezoelectric effect. The influence of the ratio of radius to thickness is discussed. Electric potential and displacement distributions are used to show the piezoelectric effect on the flexural torsional mode. The influence of the polarizing direction on the piezoelectric effect is illustrated. For the radial and axial polarization, the piezoelectric effect reacts mostly on the longitudinal mode. For circumferential polarization, the piezoelectric effect reacts mostly on the torsional mode. In the FGPM hollow cylinder, piezoelectricity can weaken the guided wave dispersion.     

An exact solution for the steady-state thermoelastic response of functionally graded orthotropic cylindrical shells

We analyze the steady-state response of a functionally graded thick cylindrical shell subjected to thermal and mechanical loads. The functionally graded shell is simply supported at the edges and it is assumed to have an arbitrary variation of material properties in the radial direction. The three-dimensional steady-state heat conduction and thermoelasticity equations, simplified to the case of generalized plane strain deformations in the axial direction, are solved analytically. Suitable temperature and displacement functions that identically satisfy the boundary conditions at the simply supported edges are used to reduce the thermoelastic equilibrium equations to a set of coupled ordinary differential equations with variable coefficients, which are then solved by the power series method. In the present formulation, the cylindrical shell is assumed to be made of an orthotropic material, although the analytical solution is also valid for isotropic materials. Results are presented for two-constituent isotropic and fiber-reinforced functionally graded shells that have a smooth variation of material volume fractions, and/or in-plane fiber orientations, through the radial direction. The cylindrical shells are also analyzed using the Flügge and the Donnell shell theories. Displacements and stresses from the shell theories are compared with the three-dimensional exact solution to delineate the effects of transverse shear deformation, shell thickness and angular span.     

Analysis of functionally graded rotating disks with variable thickness

Elastic solutions for axisymmetric rotating disks made of functionally graded material with variable thickness are presented. The material properties and disk thickness profile are assumed to be represented by two power-law distributions. In the case of hollow disk, based on the form of the power-law distribution for the mechanical properties of the constituent components and the thickness profile function, both analytical and semi-analytical solutions are given under free–free and fixed-free boundary conditions. For the solid disk, only semi-analytical solution is presented. The effects of the material grading index and the geometry of the disk on the stresses and displacements are investigated. It is found that a functionally graded rotating disk with parabolic or hyperbolic convergent thickness profile has smaller stresses and displacements compared with that of uniform thickness. It is seen that the maximum radial stress for the solid functionally graded disk with parabolic thickness profile is not at the centre like uniform thickness disk. Results of this paper suggest that a rotating functionally graded disk with parabolic concave or hyperbolic convergent thickness profile can be more efficient than the one with uniform thickness.     

Nonlinear Transient Response of Functionally Graded Material Sandwich Doubly Curved Shallow Shell Using New Displacement Field

In this paper, the nonlinear transient dynamic response of functionally graded material(FGM) sandwich doubly curved shell with homogenous isotropic material core and functionally graded face sheet is analyzed using a new displacement field on the basis of Reddy's third-order shear theory for the first time. The equivalent material properties for the FGM face sheet are assumed to obey the rule of simple power law function in the thickness direction.Based on Reddy'stheory of higher shear deformation, a new displacement field is developed by introducing the secant function into transverse displacement. Four coupled nonlinear differential equations are obtained by applying Hamilton's principle and Galerkin method. It is assumed that the FGM sandwich doubly curved shell is subjected to step loading, air-blast loading,triangular loading, and sinusoidal loading, respectively. On the basis of double-precision variablecoefficient ordinary differential equation solver, a new program code in FORTRAN software is developed to solve the nonlinear transient dynamics of the system. The influences of core thickness, volume fraction, core-to-face sheet thickness ratio, width-to-thickness ratio and blast type on the transient response of the shell are discussed in detail through numerical simulation.     

Dynamic stress analysis of a functionally graded material plate with a circular hole

This paper is to study the two-dimensional dynamic stress of a functionally graded material (FGM) plate with a circular hole under plane compressional waves at infinity. With using the method of piece-wise homogeneous layers, the dynamic stress distribution of the FGM plate having radial arbitrary material parameters is derived based on the complex variable method. As examples, numerical results are presented for the FGM plate having given radial shear modulus, density and Poisson’s ratio. It is found that the dynamic stress around the circular hole in the FGM plate can be effectively reduced by choosing the proper change ways of the radial material parameters for different frequency incident wave.