Low‐Noise and Large‐Linear‐Dynamic‐Range Photodetectors Based on Hybrid‐Perovskite Thin‐Single‐Crystals

Organic–inorganic halide perovskites are promising photodetector materials due to their strong absorption, large carrier mobility, and easily tunable bandgap. Up to now, perovskite photodetectors are mainly based on polycrystalline thin films, which have some undesired properties such as large defective grain boundaries hindering the further improvement of the detector performance. Here, perovskite thin‐single‐crystal (TSC) photodetectors are fabricated with a vertical p–i–n structure. Due to the absence of grain‐boundaries, the trap densities of TSCs are 10–100 folds lower than that of polycrystalline thin films. The photodetectors based on CH₃NH₃PbBr₃ and CH₃NH₃PbI₃ TSCs show low noise of 1–2 fA Hz^?1/2, yielding a high specific detectivity of 1.5 × 10¹³ cm Hz^1/2 W^?1. The absence of grain boundaries reduces charge recombination and enables a linear response under strong light, superior to polycrystalline photodetectors. The CH₃NH₃PbBr₃ photodetectors show a linear response to green light from 0.35 pW cm^?2 to 2.1 W cm^?2, corresponding to a linear dynamic range of 256 dB.     

Clay‐Inspired MXene‐Based Electrochemical Devices and Photo‐Electrocatalyst: State‐of‐the‐Art Progresses and Challenges

MXene, an important and increasingly popular category of postgraphene 2D nanomaterials, has been rigorously investigated since early 2011 because of advantages including flexible tunability in element composition, hydrophobicity, metallic nature, unique in‐plane anisotropic structure, high charge‐carrier mobility, tunable band gap, and favorable optical and mechanical properties. To fully exploit these potentials and further expand beyond the existing boundaries, novel functional nanostructures spanning monolayer, multilayer, nanoparticles, and composites have been developed by means of intercalation, delamination, functionalization, hybridization, among others. Undeniably, the cutting‐edge developments and applications of clay‐inspired 2D MXene platform as electrochemical electrode or photo‐electrocatalyst have conferred superior performance and have made significant impact in the field of energy and advanced catalysis. This review provides an overview of the fundamental properties and synthesis routes of pure MXene, functionalized MXene and their hybrids, highlights the state‐of‐the‐art progresses of MXene‐based applications with respect to supercapacitors, batteries, electrocatalysis and photocatalysis, and presents the challenges and prospects in the burgeoning field.     

High‐Performance n‐Channel Organic Transistors Using High‐Molecular‐Weight Electron‐Deficient Copolymers and Amine‐Tailed Self‐Assembled Monolayers

While high‐performance p‐type semiconducting polymers are widely reported, their n‐type counterparts are still rare in terms of quantity and quality. Here, an improved Stille polymerization protocol using chlorobenzene as the solvent and palladium(0)/copper(I) as the catalyst is developed to synthesize high‐quality n‐type polymers with number‐average molecular weight up to 10⁵ g mol^?1. Furthermore, by sp²‐nitrogen atoms (sp²‐N) substitution, three new n‐type polymers, namely, pBTTz, pPPT, and pSNT, are synthesized, and the effect of different sp²‐N substitution positions on the device performances is studied for the first time. It is found that the incorporation of sp²‐N into the acceptor units rather than the donor units results in superior crystalline microstructures and higher electron mobilities. Furthermore, an amine‐tailed self‐assembled monolayer (SAM) is smoothly formed on a Si/SiO₂ substrate by a simple spin‐coating technique, which can facilitate the accumulation of electrons and lead to more perfect unipolar n‐type transistor performances. Therefore, a remarkably high unipolar electron mobility up to 5.35 cm² V^?1 s^?1 with a low threshold voltage (≈1 V) and high on/off current ratio of ≈10⁷ is demonstrated for the pSNT‐based devices, which are among the highest values for unipolar n‐type semiconducting polymers.     

Synchrotron‐Based Micro‐CT and Refraction‐Enhanced Micro‐CT for Non‐Destructive Materials Characterisation

X‐ray computed tomography is an important tool for non‐destructively evaluating the 3‐D microstructure of modern materials. To resolve material structures in the micrometer range and below, high brilliance synchrotron radiation has to be used. The Federal Institute for Materials Research and Testing (BAM) has built up an imaging setup for micro‐tomography and ‐radiography (BAMline) at the Berliner storage ring for synchrotron radiation (BESSY). In computed tomography, the contrast at interfaces within heterogeneous materials can be strongly amplified by effects related to X‐ray refraction. Such effects are especially useful for materials of low absorption or mixed phases showing similar X‐ray absorption properties that produce low contrast. The technique is based on ultra‐small‐angle scattering by microstructural elements causing phase‐related effects, such as refraction and total reflection. The extraordinary contrast of inner surfaces is far beyond absorption effects. Crack orientation and fibre/matrix debonding in plastics, polymers, ceramics and metal‐matrix‐composites after cyclic loading and hydro‐thermal aging can be visualized. In most cases, the investigated inner surface and interface structures correlate to mechanical properties. The technique is an alternative to other attempts on raising the spatial resolution of CT machines.     

Single‐layer and multi‐layer wear‐resistant coatings

In this paper the formation of wear‐resistant coatings based on titanium and aluminum compounds using vacuum arc discharge and molecular nitrogen as a working gas is discussed. The experiments were carried out using an installation containing two independent evaporators and a system for attenuation and purification of the plasma flow. To obtain a high‐quality coating, it is necessary to ensure the equality of the ion flux densities coming to the substrate. The results of the experiments show that by changing the bias voltage on the substrate it is possible to adjust the content of elements in the coating and thus to control its parameters. Multi‐layer coatings have better performance characteristics, but require an improved degree of purification of the plasma flow from the droplet fraction.     

Micrometer‐ and Nanometer‐Sized Organic Single‐Crystalline Transistors

The use of micrometer and nanometer‐sized organic single crystals to fabricate devices can retain all the advantages of single crystals, avoid the difficulties of growing large crystals, and provide a way to characterize organic semiconductors more efficiently. Moreover, the effective use of such “small” crystals will be beneficial to nanoelectronics. Here we review the recent progress of organic single‐crystalline transistors based on micro‐/nanometer‐sized structures, namely fabrication methods and related technical issues, device properties, and current challenges.     

Nanocatalysts‐Augmented and Photothermal‐Enhanced Tumor‐Specific Sequential Nanocatalytic Therapy in Both NIR‐I and NIR‐II Biowindows

The tumor microenvironment (TME) has been increasingly recognized as a crucial contributor to tumorigenesis. Based on the unique TME for achieving tumor‐specific therapy, here a novel concept of photothermal‐enhanced sequential nanocatalytic therapy in both NIR‐I and NIR‐II biowindows is proposed, which innovatively changes the condition of nanocatalytic Fenton reaction for production of highly efficient hydroxyl radicals (?OH) and consequently suppressing the tumor growth. Evidence suggests that glucose plays a vital role in powering cancer progression. Encouraged by the oxidation of glucose to gluconic acid and H₂O₂ by glucose oxidase (GOD), an Fe₃O₄/GOD‐functionalized polypyrrole (PPy)‐based composite nanocatalyst is constructed to achieve diagnostic imaging‐guided, photothermal‐enhanced, and TME‐specific sequential nanocatalytic tumor therapy. The consumption of intratumoral glucose by GOD leads to the in situ elevation of the H₂O₂ level, and the integrated Fe₃O₄ component then catalyzes H₂O₂ into highly toxic ?OH to efficiently induce cancer‐cell death. Importantly, the high photothermal‐conversion efficiency (66.4% in NIR‐II biowindow) of the PPy component elevates the local tumor temperature in both NIR‐I and NIR‐II biowindows to substaintially accelerate and improve the nanocatalytic disproportionation degree of H₂O₂ for enhancing the nanocatalytic‐therapeutic efficacy, which successfully achieves a remarkable synergistic anticancer outcome with minimal side effects.     

Calcium‐Ion Batteries: Current State‐of‐the‐Art and Future Perspectives

Recent developments in rechargeable battery technology have seen a shift from the well‐established Li‐ion technology to new chemistries to achieve the high energy density required for extended range electric vehicles and other portable applications, as well as low‐cost alternatives for stationary storage. These chemistries include Li–air, Li–S, and multivalent ion technologies including Mg²⁺, Zn²⁺, Ca²⁺, and Al³⁺. While Mg²⁺ battery systems have been increasingly investigated in the last few years, Ca²⁺ technology has only recently been recognized as a viable option. In this first comprehensive review of Ca²⁺ ion technology, the use of Ca metal anodes, alternative alloy anodes, electrolytes suitable for this system, and cathode material development are discussed. The advantages and disadvantages of Ca²⁺ ion batteries including prospective achievable energy density, cost reduction due to high natural abundance, low ion mobility, the effect of ion size, and the need for elevated temperature operation are reviewed. The use of density functional theory modeling to predict the properties of Ca‐ion battery materials is discussed and the extent to which this approach is successful in directing research into areas of promise is evaluated. To conclude, a summary of recent achievements is presented and areas for future research efforts evaluated.     

Progress in Piezo‐Phototronic‐Effect‐Enhanced Light‐Emitting Diodes and Pressure Imaging

Wurtzite materials exhibit both semiconductor and piezoelectric properties under strains due to the non‐central symmetric crystal structures. The three‐way coupling of semiconductor properties, piezoelectric polarization and optical excitation in ZnO, GaN, CdS and other piezoelectric semiconductors leads to the emerging field of piezo‐phototronics. This effect can efficiently manipulate the emission intensity of light‐emitting diodes (LEDs) by utilizing the piezo‐polarization charges created at the junction upon straining to modulate the energy band diagrams and the optoelectronic processes, such as generation, separation, recombination and/or transport of charge carriers. Starting from fundamental physics principles, recent progress in piezo‐phototronic‐effect‐enhanced LEDs is reviewed; following their development from single‐nanowire pressure‐sensitive devices to high‐resolution array matrices for pressure‐distribution mapping applications. The piezo‐phototronic effect provides a promising method to enhance the light emission of LEDs based on piezoelectric semiconductors through applying static strains, and may find perspective applications in various optoelectronic devices and integrated systems.