Active transfer fault zone linking a segmented extensional system (Betics, southern Spain): Insight into heterogeneous extension driven by edge delamination

Pliocene and Quaternary tectonic structures mainly consisting of segmented northwest–southeast normal faults, and associated seismicity in the central Betics do not agree with the transpressive tectonic nature of the Africa–Eurasia plate boundary in the Ibero-Maghrebian region. Active extensional deformation here is heterogeneous, individual segmented normal faults being linked by relay ramps and transfer faults, including oblique-slip and both dextral and sinistral strike-slip faults. Normal faults extend the hanging wall of an extensional detachment that is the active segment of a complex system of successive WSW-directed extensional detachments which have thinned the Betic upper crust since middle Miocene. Two areas, which are connected by an active 40-km long dextral strike-slip transfer fault zone, concentrate present-day extension. Both the seismicity distribution and focal mechanisms agree with the position and regime of the observed faults. The activity of the transfer zone during middle Miocene to present implies a mode of extension which must have remained substantially the same over the entire period. Thus, the mechanisms driving extension should still be operating. Both the westward migration of the extensional loci and the high asymmetry of the extensional systems can be related to edge delamination below the south Iberian margin coupled with roll-back under the Alborán Sea; involving the asymmetric westward inflow of asthenospheric material under the margins.     

Neogene exhumation and relief evolution in the eastern Betics (SE Spain): Insights from the Sierra de Gador

The Betics are a key area to study an orogenic landscape disrupted by late‐orogenic extension. New low‐temperature thermochronology (LTT) data (AHe and AFT) coupled with geomorphic constraints in the Sierra de Gador (Alpujarride complex) are used to reconstruct the cooling history and evolution of relief during the Neogene. We document three stages: (1) a fast cooling event between 23 and 16 Ma associated with the well‐known extensive tectonic exhumation of the Alpujarride unit, (2) a period of slow cooling between 16 and 7.2 Ma related to a planation event and (3) a post‐7.2 Ma surface uplift associated with the inversion of the Alboran domain undetected by LTT. The planation event followed by this late uplift can explain the occurrence of inherited low‐relief surfaces overlain by Tortonian–Messinian platform deposits at the top of the range. Finally, we propose that the Sierra de Gador is a more transient landscape than the nearby Sierra Nevada.     

Uppermost Tortonian to Quaternary depocentre migration related with segmentation of the strike-slip Palomares Fault Zone,Vera Basin (SE Spain)

The Palomares Fault Zone (PFZ) is one of the main strike-slip brittle shear zones found in the Betics. It is segmented in several faults that have been active between the Upper Tortonian and present day. Data from drill cores in the Palomares area have permitted us to define the geometry and location of sedimentary depocentres related with the PFZ. These data show an eastward displacement between the Upper Tortonian to Messinian and the Pliocene–Quaternary sedimentary depocentres, towards the presently active Arteal fault, which bounds the western mountain front of Sierra Almagrera, showing that deformation along this fault zone has migrated towards the east, from the Palomares segment, with its main activity during the Upper Tortonian and Messinian, towards the Arteal fault, active during the Pliocene and Quaternary. To cite this article: G. Booth-Rea et al., C. R. Geoscience 335 (2003).     

郯庐断裂带（安徽部分）动力学演化及其构造意义

依据区域构造层划分,从最新地层内的断裂动力学分析开始,层层深入,层层筛选,采用计算机程序对所获的断层面上的擦痕统计分析计算,求得每个点上的古应力场状态,继而求得区域古构造应力场状态。确定发生于各个不同时代断裂活动的古应力场特征。最后确定了一个连续的、完整的古应力场演化序列表,结合区域构造变形特征分析,阐述断裂带的构造事件演化序列及其构造意义。     

Plagioclase porphyroblast growth and its relation to deformation in the Alhamilla unit (Sierra Alhamilla, Betic Cordilleras, SE Spain)

Abstract. Plagioclase porphyroblasts from silvergrey schists belonging to the Nevado Filabride Complex in the Sierra Alhamilla (Betic Zone, SE Spain) are interpreted as having been formed preand synkinematically with respect to the second phase of deformation. Different types of inclusion patterns represent 'snap-shots'(high growth-rate/strain-rate ratio features) of the formation of a diffentiated crenulation cleavage during this second phase of deformation, by the processes of kinking, crenulation and associated differentiation.
Regional considerations indicate an Alpine age for this tectono-metamorphic event, which can be explained by the'hot emplacement'of the higher Nevado Filabride units. The observed structural evolution is not consistent with a pre-Alpine polyphase deformation history.     

碳酸盐岩断裂破碎带结构、分布与发育机制

断裂带通常包括狭窄的断层核与宽阔的破碎带,并对岩石物理及其水力学、流体与渗透性具有重要作用。根据断裂破碎带结构的差异,将碳酸盐岩断层核划分为颗粒支撑、基质支撑与胶结支撑等3种类型,将碳酸盐岩破碎带划分碎裂带与裂缝带。不同类型碳酸盐岩断层核与破碎带形成多种类型组合,并造成断裂破碎带多种复杂的渗流结构。通过井—震资料的结合,可以判识沉积盆地内部较宽的碳酸盐岩断裂破碎带,其宽度—位移关系可以指示断裂破碎带的不同生长方式与机制。复杂内部结构、多期构造成岩作用与non-Andersonian破裂机制可能导致碳酸盐岩断裂破碎带的异常生长,也是碳酸盐岩断裂破碎带机理研究的重要方向。     

碳酸盐岩断裂破碎带结构、分布与发育机制

断裂带通常包括狭窄的断层核与宽阔的破碎带,并对岩石物理及其水力学、流体与渗透性具有重要作用。根据断裂破碎带结构的差异,将碳酸盐岩断层核划分为颗粒支撑、基质支撑与胶结支撑等3种类型,将碳酸盐岩破碎带划分碎裂带与裂缝带。不同类型碳酸盐岩断层核与破碎带形成多种类型组合,并造成断裂破碎带多种复杂的渗流结构。通过井—震资料的结合,可以判识沉积盆地内部较宽的碳酸盐岩断裂破碎带,其宽度—位移关系可以指示断裂破碎带的不同生长方式与机制。复杂内部结构、多期构造成岩作用与non-Andersonian破裂机制可能导致碳酸盐岩断裂破碎带的异常生长,也是碳酸盐岩断裂破碎带机理研究的重要方向。     

青藏高原东南缘德钦- 中甸断裂中北段活动性及地震危险性评估

青藏高原的隆升和向东挤出使得青藏高原内部和周缘形成一系列强烈变形的次级块体,川滇地块是其中变形最为活跃的地块。德钦 中甸断裂是川滇地块的西边界断裂之一,晚第四纪以来断裂主要表现为右旋滑动,同时发育倾滑分量。在奔子栏镇 瓦卡镇以南至中甸一带,断层发育明显的正倾滑分量,在奔子栏镇 瓦卡镇以北则发育明显的逆倾滑分量。奔子栏镇一带是断层运动特征的改变部位,也是断层宏观走向改变的部位,这些特征表明奔子栏镇更是德钦 中甸走滑断裂的枢纽部位。研究表明德钦 中甸断裂在奔子栏镇附近的古地震平均复发周期为11. 35±2. 4ka,长期滑动速率1. 3~1. 7mm/a。按照构造类比原则,奔子栏镇是德钦 中甸断裂的地震成核部位,其潜在震级下限不会低于M7,潜在地震烈度下限不会低于Ⅹ度。     

Neotectonic and volcanic characteristics of the Karasu fault zone (Anatolia,Turkey): The transition zone between the Dead Sea transform and the East Anatolian fault zone

Abstract

The Karasu Rift (Antakya province, SE Turkey) has developed between east-dipping, NNE-striking faults of the Karasu fault zone, which define the western margin of the rift and westdipping, N-S to N20°-30°E-striking faults of Dead Sea Transform fault zone (DST) in the central part and eastern margin of the rift. The strand of the Karasu fault zone that bounds the basin from west forms a linkage zone between the DST and the East Anatolian fault zone (EAFZ). The greater vertical offset on the western margin faults relative to the eastern ones indicates asymmetrical evolution of the rift as implied by the higher escarpments and accumulation of extensive, thick alluvial fans on the western margins of the rift. The thickness of the Quaternary sedimentary fill is more than 465 m, with clastic sediments intercalated with basaltic lavas. The Quaternary alkali basaltic volcanism accompanied fluvial to lacustrine sedimentation between 1.57 ± 0.08 and 0.05 ± 0.03 Ma. The faults are left-lateral oblique-slip faults as indicated by left-stepping faulting patterns, slip-lineation data and left-laterally offset lava flows and stream channels along the Karasu fault zone. At Hacilar village, an offset lava flow, dated to 0.08 ± 0.06 Ma, indicates a rate of leftlateral oblique slip of approximately 4.1 mm?year^?1. Overall, the Karasu Rift is an asymmetrical transtensional basin, which has developed between seismically active splays of the left-lateral DST and the left-lateral oblique-slip Karasu fault zone during the neotectonic period. © 2001 Éditions scientifiques et médicales Elsevier SAS     

Neotectonic and volcanic characteristics of the Karasu fault zone (Anatolia,Turkey): The transition zone between the Dead Sea transform and the East Anatolian fault zone

The Karasu Rift (Antakya province, SE Turkey) has developed between east-dipping, NNE-striking faults of the Karasu fault zone, which define the western margin of the rift and west-dipping, N–S to N20°–30°E-striking faults of Dead Sea Transform fault zone (DST) in the central part and eastern margin of the rift. The strand of the Karasu fault zone that bounds the basin from west forms a linkage zone between the DST and the East Anatolian fault zone (EAFZ). The greater vertical offset on the western margin faults relative to the eastern ones indicates asymmetrical evolution of the rift as implied by the higher escarpments and accumulation of extensive, thick alluvial fans on the western margins of the rift. The thickness of the Quaternary sedimentary fill is more than 465 m, with clastic sediments intercalated with basaltic lavas. The Quaternary alkali basaltic volcanism accompanied fluvial to lacustrine sedimentation between 1.57 ± 0.08 and 0.05 ± 0.03 Ma. The faults are left-lateral oblique-slip faults as indicated by left-stepping faulting patterns, slip-lineation data and left-laterally offset lava flows and stream channels along the Karasu fault zone. At Hacılar village, an offset lava flow, dated to 0.08 ± 0.06 Ma, indicates a rate of left-lateral oblique slip of approximately 4.1 mm·year^–1. Overall, the Karasu Rift is an asymmetrical transtensional basin, which has developed between seismically active splays of the left-lateral DST and the left-lateral oblique-slip Karasu fault zone during the neotectonic period.     

The Finne fault zone (central Germany): structural analysis of a partially inverted extensional fault zone by balanced cross-sections

The Finne fault zone, located in central Germany to the southwest of the Harz mountains, was studied by means of detailed map analysis, investigations of fault displacement and balanced cross-sections for the most strongly deformed area in the center of the fault zone (ca. 50?% of total fault zone length). The system of the Finne fault zone shows a nearly 100-km-long straight flexure that symbolizes the morphological and geological northeastern border of the Thuringian basin. In the central part, which should be surveyed here, the fault zone corresponds to a distinctive narrow band of highly deformed Triassic sedimentary rocks. The northwestern and especially the southeastern parts of the research area are developed as several parallel branch faults. In the southeastern elongation of the fault zone, which is not part of our survey, the sedimentary cover is missing. Here, it is possible to gain insight to the fact that the basement is also involved to the kinematics of the fault zone. Based on our results, we propose a subdivision of the fault zone into four sectors. From the northwest to the southeast, we interpret the structure of these sectors to reflect (1) a compressional flexure, (2) an overthrust graben, and (3) a partially inverted and folded half graben. In the extreme southeast (4), the fault zone is characterized by an anticline with some strike-slip movement parallel to the fold axis. This segmentation is caused by a thrust fault system whose strike direction deviates slightly from that of the earlier formed graben system. The structural configuration can be explained by a two-phase deformation, in which the contractional strain exceeded the preceding extensional deformation. In the investigated area, the horizontal shortening attains a maximum of ca. 1?km. The present study confirms many earlier hypotheses, presents new results on the deformation history of the fault zone, and attempts to evaluate the deformation in a regional geological context. The results of earlier studies were refined and revised using modern methods, and a unified structural and kinematic model of the Finne fault zone was created.     

The Manyas fault zone (southern Marmara region,NW Turkey): active tectonics and paleoseismology

The Manyas fault zone (MFZ) is a splay fault of the Yenice Gönen Fault, which is located on the southern branch of the North Anatolian Fault System. The MFZ is a 38 km long, WNW–ESE-trending and normal fault zone comprised of three en-echelon segments. On 6 October 1964, an earthquake (Ms = 6.9) occurred on the Salur segment. In this study, paleoseismic trench studies were performed along the Salur segment. Based on these paleoseismic trench studies, at least three earthquakes resulting in a surface rupture within the last 4000 years, including the 1964 earthquake have been identified and dated. The penultimate event can be correlated with the AD 1323 earthquake. There is no archaeological and/or historical record that can be associated with the oldest earthquake dated between BP 3800 ± 600 and BP 2300 ± 200 years. Additionally, the trench study performed to the north of the Salur segment demonstrates paleoliquefaction structures crossing each other. The surface deformation that occurred during the 1964 earthquake is determined primarily to be the consequence of liquefaction. According to the fault plane slip data, the MFZ is a purely normal fault demonstrating a listric geometry with a dip of 64°–74° to the NNE.     

Advanced DInSAR analysis on mining areas: La Union case study (Murcia, SE Spain)

The town of La Union (SE, Spain) is located within a metal mining area that has been exploited since the Roman period. This historic exploitation has left behind a high concentration of abandoned underground mining galleries. Currently, an industrial area is subsiding due to the collapse of one of these galleries in May 1998. In this paper, an advanced Differential Interferometry SAR (DInSAR) method called the Coherent Pixels Technique (CPT) has been used to study the subsidence phenomena for two time intervals, from January 1998 to December 2000, and from March 2003 to December 2004. DInSAR-derived deformation maps have enabled the detection and monitoring of different deformation processes that affect several locations within the study area. By comparing these results with the underground mining galleries map, a clear relationship between their presence and the subsidence has been proved. Deformation values retrieved with DInSAR between April 2003 and December 2004 have been compared with the topographical leveling network measurements performed in this same period, providing an absolute average difference of 0.7 cm with a standard deviation of 0.5 cm. Results obtained in the city of La Union have shown that the advanced DInSAR technique is able to provide very useful spatial and temporal deformation data for the measurement of small scale subsidence throughout short time periods. This technique has enabled the temporal evolution of the phenomena in the city of La Unión to be studied and understanding of subsidence to be expanded beyond the limits of a deployed topographical control network, in a more cost effective way than classical methods.     

A ‘core-complex-like structure’ formed by superimposed extension,folding and high-angle normal faulting. The Santi Petri dome (western Betics,Spain)

The Santi Petri dome (western Betics, southern Spain) shows a core-complex-like structure, where migmatitic gneisses and schists outcrop below low-grade slates and phyllites, all of which form the basement of the Neogene Málaga basin. The migmatites and schists suffered a coaxial-flattening event during isothermal decompression and were later exhumed by ductile ESE non-coaxial stretching. Further exhumation was achieved by W- to SW-transport brittle low-angle normal faulting. Subsequently these extensional structures were gently folded in the core of a NE/SW-oriented antiform during the Tortonian. Finally the Santi Petri domal geometry was accentuated by the interference of orthogonal high-angle faults with ENE–WSW and NNW–SSE orientation. This core-complex-like structure, formed by superposition of extensional and compressive tectonic events, does not represent a classical, purely extensional core complex, which shows that metamorphic structure and geometry are not decisive criteria to define a core-complex.     

Deformation features within an active normal fault zone in carbonate rocks: The Gubbio fault (Central Apennines, Italy)

The Gubbio fault is an active normal fault defined by an important morphological scarp and normal fault focal mechanism solutions. This fault truncates the inherited Miocene Gubbio anticline and juxtaposes Mesozoic limestones in the footwall against Quaternary lacustrine deposits in the hanging wall. The offset is more than 2000 m of geological throw accumulated during a poly-phased history, as suggested by previous works, and has generated a complex zone of carbonate-rich fault-related structures. We report the results of a multidisciplinary study that integrates detailed outcrop and petrographic analysis of two well-exposed areas along the Gubbio fault zone, geochemical analysis (fluid inclusions, stable isotopes, and trace elements) of calcite-sealed fault-related structures and fault rocks, and biostratigraphic controls. Our aims are: (i) the characterization of the deformation features and their spatial–temporal relationships, and (ii) the determination of the P/T conditions and the fluid behaviour during deformation to achieve a better understanding of fluid–rock interaction in fault zones.We show that few of the observed structures can be attributed to an inherited shortening phase while the most abundant structures and fault rocks are related to extensional tectonics. The outcropping extensional patterns formed at depths less than 2.5–3 km, in a confined fluid system isolated from meteoric water, and the fault structures are the response to a small amount of cumulated displacement, 12–19% of the total geological throw.     

Growth, linkage, and termination processes of a 10-km-long strike-slip fault in jointed granite: the Gemini fault zone, Sierra Nevada, California

Field-based structural analysis of an exhumed, 10-km-long strike-slip fault zone elucidates processes of growth, linkage, and termination along moderately sized strike-slip fault zones in granitic rocks. The Gemini fault zone is a 9.3-km-long, left-lateral fault system that was active at depths of 8–11 km within the transpressive Late-Cretaceous Sierran magmatic arc. The fault zone cuts four granitic plutons and is composed of three steeply dipping northeast- and southwest-striking noncoplanar segments that nucleated and grew along preexisting cooling joints. The fault core is bounded by subparallel fault planes that separate highly fractured epidote-, chlorite-, and quartz-breccias from undeformed protolith. The slip profile along the Gemini fault zone shows that the fault zone consists of three 2–3-km-long segments separated by two ‘zones’ of local slip minima. Slip is highest (131 m) on the western third of the fault zone and tapers to zero at the eastern termination. Slip vectors plunge shallowly west-southwest and show significant variability along strike and across segment boundaries. Four types of microstructures reflect compositional changes in protolith along strike and show that deformation was concentrated on narrow slip surfaces at, or below, greenschist facies conditions. Taken together, we interpret the fault zone to be a segmented, linked fault zone in which geometrical complexities of the faults and compositional variations of protolith and fault rock resulted in nonuniform slip orientations, complex fault-segment interactions, and asymmetric slip-distance profiles.     

Joints,faults and palaeostress evolution in the Campo de Dalias (Betic Cordilleras,southeastern Spain)

The Campo de Dal??as, located between the central and eastern Betic Cordilleras, shows an evolution determined by the overprinting of two main stress fields since Pliocene times. The first of these develops hybrid and tensional joint sets up to Pleistocene (100 000 yr) and is characterized by NNW–SSE horizontal trend of compression and an ENE–WSW horizontal extension. The second stress field has prolate to triaxial extensional ellipsoids, also with ENE–WSW horizontal extension, and continues to be active today. The most recent stresses produce the reactivation of previous joints as faults whose trends are comprised mainly from N120°E to N170°E and have a normal and transtensional regime, with dextral or sinistral components. The palaeostress evolution of this region is similar to that undergone by other basins of the Eastern Betic Cordilleras, although the Pliocene–Pleistocene transcurrent deformations in the Campo de Dal??as only develop joints and not strike-slip faults.