Magnetocaloric effect in La0.75Sr0.25MnO3 manganite

The polycrystalline manganite La_0.75Sr_0.25MnO₃ prepared by an alternative carbonate precipitation route reveals the rhombohedral perovskite structure. Magnetization isotherms measured up to 2 T are used to determine Curie temperature of 332 K by means of Arrott plot. Maximum of magnetic entropy change is found at Curie temperature. The relative cooling power equal to 64 J/kg for 1.5 T magnetic field, is superior as compared to the manganite with the same chemical composition from the sol-gel method.     

Effect of monovalent metal substitution on the magnetocaloric effect of perovskite manganites Pr0.5Sr0.3M0.2MnO3 (M=Na,Li, K and Ag)

The influence of monovalent doping on the magnetocaloric effect (MCE) and refrigerant capacity or relative cooling power (RCP) of Pr_0.5Sr_0.3M_0.2MnO₃ (M=Na, Li, K and Ag) materials has been investigated. A large magnetocaloric effect was inferred over a wide range of temperature around the second order paramagnetic–ferromagnetic transition. The maximum magnetic entropy changes (ΔS_M) reached 1.8, 2.2, 1.6 and 2.1 J/kg K and the relative cooling power (RCP) approached 58.9, 59.3, 69.6 and 54.6 J/kg for Na, Li, K and Ag doped materials in the magnetic change of 15 kOe, respectively. According to the results determined by the Maxwell relation, the magnetic entropy change fits well with the Landau theory of phase transition above T_C for Pr_0.5Sr_0.3Li_0.2MnO₃. The large magnetic entropy change induced by low magnetic field suggested that these materials are beneficial for practical applications.     

Magnetocaloric properties of (La0.67−xGdx)Sr0.33MnO3 polycrystalline nanoparticles

In this paper, magnetic property and magnetocaloric effect (MCE) in nanoparticles perovskite manganites of the type (La_0.67−xGd_x)Sr_0.33MnO₃ (x=0.10, 0.15, 0.20) synthesized by using an amorphous molecular alloy as precursor have been reported. From the magnetic measurements as function of temperature and magnetic applied field, we have discovered that the Curie temperature (T_C) of the prepared samples is found to be strongly dependent on Gd content. The Curie temperature of samples is 358.4, 343.2, and 285.9 K for x=0.1, 0.15, and 0.2, respectively. A large magnetocaloric effect close to T_C has been observed with a maximum of magnetoentropy change in all the samples, ∣ΔS_M∣_max of 1.96 and 4.90 J/kg K at 2 and 5 T, respectively, for a substitution rate of 0.15. In addition, the maximum magnetic entropy change observed for samples with different concentration of Gd, exhibits a linear dependence with the applied high magnetic field. These results suggest that (La_0.67−x Gd_x)Sr_0.33MnO₃ (x=0.10, 0.15, 0.20) compounds could be a suitable candidate as working substance in magnetic refrigeration near room temperature.     

Magnetocaloric effect at room temperature in manganese perovskite La0.65Nd0.05Pb0.3MnO3 with double resistivity peaks

Series of polycrystalline manganese perovskite oxides La_0.7−xNd_xPb_0.3MnO₃ (x=0, 0.05, and 0.1) are prepared by the sol-gel technique, La_0.65Nd_0.05Pb_0.3MnO₃ were representatively investigated because the peculiar double resistivity peaks were found; the maximum magnetic entropy change ΔS_H=−2.03 J/kg K and its good refrigerant capacity 71.05 J/kg around room temperature were obtained under 9 kOe magnetic field variation. The expected double peaks of magnetocaloric effect had not occurred since magnetic entropy change originated from the differential coefficient of magnetic moment to temperature; the relatively well refrigerant capacity possibly results from the faint magnetic inhomogeneity mixed in the double exchange strong magnetic signal.     

Magnetocaloric properties in the Cr-doped La0.7Sr0.3MnO3 manganites

Single-phase polycrystalline samples of La_0.7Sr_0.3Mn_1-xCr_xO₃ with nominal composition of x=0.00, 0.20, 0.40 and 0.50 were prepared by a conventional solid-state reaction method in air. Investigations of magnetization were carried out in the temperature range 5-400 K and magnetic field range 0-8 T. It was found that the Curie temperature T_C decreases with increasing x and the maximum magnetic entropy change (−ΔS_M) for x=0.20 is ∼1.203 and ∼2.653 J/kg K, respectively for 2 and 6 T magnetic field near the temperature of 280 K.     

Structure and magnetocaloric properties of La1−xKxMnO3 manganites

A technology of obtaining the single-phase ceramic samples of La_1−xK_xMnO₃ manganites and the dependence of their structural parameters on the content of potassium has been described. Magnetocaloric effect (MCE) in the obtained samples has been measured by two independent methods: classical direct methodic and a method of magnetic field modulation. The values of MCE obtained by both methods substantially differ. The explanation of the observed divergences is given. The correlation between the level of doping and MCE value has been defined. The value of T_C determined by the MCE maximum conforms with the literature data obtained by other methods.     

Magnetocaloric effect in La0.67Sr0.33MnO3 manganite above room temperature

The La_0.67Sr_0.33MnO₃ composition prepared by sol-gel synthesis was studied by dc magnetization measurements. A large magnetocaloric effect was inferred over a wide range of temperature around the second-order paramagnetic-ferromagnetic transition. The change of magnetic entropy increases monotonically with increasing magnetic field and reaches the value of 5.15 J/kg K at 370 K for Δμ0H=5 T. The corresponding adiabatic temperature change is 3.3 K. The changes in magnetic entropy and the adiabatic temperature are also significant at moderate magnetic fields. The magnetic field induced change of the specific heat varies with temperature and has maximum variation near the paramagnetic-ferromagnetic transition. The obtained results show that La_0.67Sr_0.33MnO₃ could be considered as a potential candidate for magnetic refrigeration applications above room temperature.     

The influence of the sintering temperature on the structural and the magnetic properties of doped manganites: La0.95Ag0.05MnO3 and La0.75Ag0.25MnO3

La_1−xAg_xMnO₃ samples were synthesized by standard sol-gel method with Ag concentrations of x=0.05 and 0.25. The samples from each concentration were pressed and sintered at 1000, 1200 and 1400 °C for 24 h in air for a systematic study. They were examined structurally by Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) with Energy Dispersive Spectroscopy (EDS) and X-ray Diffraction (XRD) and magnetically by Magnetic Properties Measurements System (MPMS). AFM and SEM analyses show that surface morphology changes with Ag concentration and sintering temperature (T_S). It was observed that high temperature sintering leads Ag to leave material as determined from EDS analyses. XRD spectra exhibited that the crystal structure changes with Ag concentration while showing pronounced change with the sintering temperature. From the magnetic measurements, the Curie temperatures (T_C) and the isothermal magnetic entropy changes (−ΔSM) were calculated. It was observed that T_C increases with Ag concentration and decreases with T_S. The maximum −ΔSM was calculated to be 7.2 J/kg K under the field change of 5 T for the sample sintered at 1000 °C with x=0.25.     

Magnetocaloric effect in (La0.47Gd0.2)Sr0.33MnO3 polycrystalline nanoparticles

In this paper, nanosized particles of (La_0.47Gd_0.2)Sr_0.33MnO₃ perovskite-type oxides were successfully synthesized at a relatively low calcinated temperature at 800 °C for 10 h using amorphous molecular alloy as precursor. X-ray diffraction (XRD) and electron diffraction (ED) revealed that the resulting product is of pure single-phase rhombohedral structure. The Curie temperature T_C and magnetic entropy change (MCE) in (La_0.47Gd_0.2)Sr_0.33MnO₃ polycrystalline nanoparticles are determined and compared to those of similar systems prepared by the conventional solid-state reaction method. The Curie temperature T_C is shifted to 298 k, and a relatively large MCE with a broad peak around Curie temperature is observed in (La_0.47Gd_0.2)Sr_0.33MnO₃ polycrystalline particles. These results suggested that this material is a suitable candidate as working substance in magnetic refrigeration near room temperature.     

The relation between magnetoresistance and magnetocaloric effect in La0.85Ag0.15MnO3 manganite

We present the temperature dependence of La_0.85Ag_0.15MnO₃ resistivity in the temperature interval between 77 and 340 K and magnetic fields up to 26 kOe. We offer a method of separating tunnel magnetoresistance from total magnetoresistance. A change in both the magnetic entropy, which is caused by the magnetocaloric effect (MCE), and the magnetoresistance are shown to be connected through a simple relationship to La_0.85Ag_0.15MnO₃.     

Investigation of magnetocaloric effect in La0.45Pr0.25Ca0.3MnO3 by magnetic,differential scanning calorimetry and thermal analysis

We investigated magnetocaloric effect in La_0.45Pr_0.25Ca_0.3MnO₃ by direct methods (changes in temperature and latent heat) and indirect method (magnetization isotherms). This compound undergoes a first-order paramagnetic to ferromagnetic transition with T_C=200 K upon cooling. The paramagnetic phase becomes unstable and it transforms into a ferromagnetic phase under the application of magnetic field, which results in a field-induced metamagnetic transition (FIMMT). The FIMMT is accompanied by release of latent heat and temperature of the sample as evidenced from differential scanning calorimetry and thermal analysis experiments. A large magnetic entropy change of ΔS_m=−7.2 J kg⁻¹ K⁻¹ at T=212.5 K and refrigeration capacity of 228 J kg⁻¹ are found for a field change of ΔH=5 T. It is suggested that destruction of magnetic polarons and growth of ferromagnetic phase accompanied by a lattice volume change with increasing magnetic field is responsible for the large magnetocaloric effect in this compound.     

Tuning the magnetocaloric properties of La0.7Ca0.3MnO3 manganites through Ni-doping

The effect of Ni²⁺ doping on the magnetic and magnetocaloric properties of La_0.7Ca_0.3MnO₃ manganites synthesized via the auto-combustion method is reported. The aim of studying Ni²⁺-substituted La_0.7Ca_0.3Mn_1 ? xNi_xO₃ ($x=0,0.02,0.07$, and 0.1) manganites was to explore the possibility of increasing the operating temperature range for the magnetocaloric effect through tuning of the magnetic transition temperature. X-ray diffraction analysis confirmed the phase purity of the synthesized samples. The substitution of Mn³⁺ ions by Ni²⁺ ions in the La_0.7Ca_0.3MnO₃ lattice was also corroborated through this technique. The dependence of the magnetization on the temperature reveals that all the compositions exhibit a well-defined ferromagnetic to paramagnetic transition near the Curie temperature. A systematic decrease in the values of the Curie temperature is clearly observed upon Ni²⁺ doping. Probably the replacement of Mn³⁺ by Ni²⁺ ions in the La_0.7Ca_0.3MnO₃ lattice weakens the Mn³⁺–O–Mn⁴⁺ double exchange interaction, which leads to a decrease in the transition temperature and the magnetic moment in the samples. By using Arrott plots, it was found that the phase transition from ferromagnetic to paramagnetic is second order. The maximum magnetic entropy changes observed for the $x=0,0.02,0.07$, and 0.1 composites was 0.85, 0.77, 0.63, and 0.59 J/kg?K, respectively, under a magnetic field of 1.5 T. In general, it was verified that the magnetic entropy change achieved for La_0.7Ca_0.3Mn_1 ? xNi_xO₃ manganites synthesized via the auto-combustion method is higher than those reported for other manganites with comparable Ni²⁺-doping levels synthesized via standard solid state reaction. The addition of Ni²⁺ increases the value of the relative cooling power as compared to that of the parent compound. The highest value of this parameter (～60 J/kg) is found for a Ni-doping level of 2% around 230 K in a field of 1.5 T.     

Effect of inhomogeneity on magnetic, magnetocaloric, and magnetotransport properties of La0.6Pr0.1Ca0.3MnO3 single crystal

The effect of magnetic inhomogeneity on magnetic, magnetocaloric, and transport properties of the colossal magnetoresistance manganites with first order ferromagnetic-to-paramagnetic phase transition is studied. The experiments were performed on the single-crystalline samples of La_0.6Pr_0.1Ca_0.3MnO₃. The inhomogeneity is described by the Curie temperature distribution function, which is found from the magnetization data. The temperature dependence of the magnetic field induced change in the entropy is shown to be determined by the distribution function and the shift of the transition temperature in a magnetic field. Similarly, magnetoresistance in the transition region is determined by the resistivity at H=0 and the shift of the transition temperature. The maximum entropy change as well as maximum magnetoresistance can be achieved in the magnetic field of order δT_C/B_M where δT_C is the transition width and B_M is the rate of change of the Curie temperature with magnetic field.Our approach to analysis of the effects of inhomogeneity is general and therefore can be used for all compounds with the first order magnetic phase transition.     

Electrical behavior of nano-polycrystalline (La1−yKy)0.7Ba0.3MnO3 manganites

We present a study of the structural and electrical behavior of nano-polycrystalline mixed barium and alkali substituted lanthanum-based manganite, (La_1−yK_y)_0.7Ba_0.3MnO₃ with y=0.0-0.3. The samples were synthesized by the polymerization complex sol-gel method. The powder X-ray diffraction (XRD) data of the samples show a single-phase character with space group. The magnetic and electrical transport properties of the nano-polycrystalline samples have been investigated in the temperature range 50-300 K and a magnetic field up to 10 kOe. The metal-insulator transition temperature T_p of all the samples decreased with potassium doping, and also, it increased slightly with the application of magnetic field. The low field magnetoresistance, which is absent in the single-crystalline perovskite, was observed and increased with decreasing temperature. Comparing the experimental resistivity data with the theoretical models shows that the high temperature electrical behavior of these samples is in accordance with the adiabatic small polaron-hopping model. In the metal-ferromagnetic region the resistivity is found to be quite well described by ρ=ρ₀+ρ₂T²+ρ_4.5T^4.5.     

Hydrothermal synthesis and Magnetocaloric effect of La0.5Ca0.3Sr0.2MnO3

The hydrothermal synthesis and magnetic entropy change for the perovskite manganite La_0.5Ca_0.3Sr_0.2MnO₃ have been studied. The La_0.5Ca_0.3Sr_0.2MnO₃ can be produced as phase-pure, crystalline powders in one step from solutions of metal salts in aqueous potassium hydroxide solution at a temperature of 513 K in 72 h. Scanning electron microscopy shows that the materials are made up of cuboid-shaped particles in typical dimension of 4.0×2.5×1.6 μm. Heat treatment can improve the magnetocaloric effect for the hydrothermal sample. The maximum magnetic entropy change ΔS_M for the as-prepared sample is 0.88 J kg⁻¹ K⁻¹ at 315 K for a magnetic field change of 2.0 T. It increases to 1.52 J kg⁻¹ K⁻¹, near its Curie temperature (317 K) by annealing the sample at 1473 K for 6 h. The hydrothermal synthesis method is a feasible route to prepare high-quality perovskite material for magnetic refrigeration application.     

Correlation of electrical and thermalphysical properties of La0.85Ag0.15MnO3 manganite

The relationship of electrical and thermal properties of manganites has been traced through the analysis of temperature dependence of the La_0.85Ag_0.15MnO₃ resistivity. The discussion of results has been held on the basis of percolation theory in the framework of the phase-layered manganite. A behavior of the heat capacity, as well as a change in magnetic entropy can be predicted from the analysis of temperature and magnetic-field dependences of resitivity.     

Effect of Fe substitution on magnetocaloric effect in La0.7Sr0.3Mn1−xFexO3 (0.05≤x≤0.20)

We have studied the effect of Fe substitution on magnetic and magnetocaloric properties in La_0.7Sr_0.3Mn_1−xFe_xO₃ (x=0.05, 0.07, 0.10, 0.15, and 0.20) over a wide temperature range (T=10-400 K). It is shown that substitution by Fe gradually decreases the ferromagnetic Curie temperature (T_C) and saturation magnetization up to x=0.15 but a dramatic change occurs for x=0.2. The x=0.2 sample can be considered as a phase separated compound in which both short-range ordered ferromagnetic and antiferromagnetic phases coexist. The magnetic entropy change (−ΔS_m) was estimated from isothermal magnetization curves and it decreases with increase of Fe content from 4.4 J kg⁻¹ K⁻¹ at 343 K (x=0.05) to 1.3 J kg⁻¹ K⁻¹ at 105 K (x=0.2), under ΔH=5 T. The La_0.7Sr_0.3Mn_0.93Fe_0.07O₃ sample shows negligible hysteresis loss, operating temperature range over 60 K around room temperature with refrigerant capacity of 225 J kg⁻¹, and magnetic entropy of 4 J kg⁻¹ K⁻¹ which will be an interesting compound for application in room temperature refrigeration.     

In-situ strain effect on extrinsic transport of polycrystalline La0.7(Ca,Sr)0.3MnO3 films

The spin-polarised transport in ferromagnetic polycrystalline La_0.7(Sr,Ca)_0.3MnO₃ films on piezoelectric substrate has been investigated. The systematic study involved in finding the effect of in-situ strain on extrinsic electrical transport of various thick polycrystalline La_0.7(Sr,Ca)_0.3MnO₃ thin films. The in-situ strain in the manganite polycrystalline thin film is achieved by applying an electric field to the piezoelectric substrate 0.72 Pb(Mg_1/3Nb_2/3)O₃-0.28 PbTiO₃ (PMN-PT). A reversible strain of about 0.11% is acquired with an application of 10 kV/cm to the piezoelectric substrate. A typical drop in resistance at low magnetic fields has been found in all the polycrystalline manganite films. The effect of reversible strain versus the resultant strain gauges was discussed in all the polycrystalline films. At low temperatures, the effect of strain on low-field magnetoresistance and high-field magnetoresistance was found to be negligible. Further, the results are compared with the transport in manganite films deposited on step edge junctions.     

Room temperature magnetic entropy change and magnetoresistance in La0.70(Ca0.30−xSrx)MnO3:Ag 10% (x=0.0−0.10)

The magnetic and magnetocaloric properties of polycrystalline La_0.70(Ca_0.30−xSr_x)MnO₃:Ag 10% manganite have been investigated. All compositions are crystallized in single phase orthorhombic Pbnm space group. Both, the insulator–metal transition temperature (T^IM) and Curie temperature (T_c) are observed at 298 K for x=0.10 composition. Though both T^IM and T_c are nearly unchanged with Ag addition, the MR is increased. The MR at 300 K is found to be as large as 31% with magnetic field change of 1 T, whereas it reaches up to 49% at magnetic field of 3 T for the La_0.70Ca_0.20Sr_0.10MnO₃:Ag_0.10 sample. The maximum entropy change (ΔS_Mmax) at near its T_c (300.5 K) is 7.6 J kg⁻¹ K⁻¹ upon the magnetic field change of 5 T. The La_0.70Ca_0.20Sr_0.10MnO₃:Ag_0.10 sample having good MR (31%^1 T, 49%^3 T) and reasonable change in magnetic entropy (7.6 J kg⁻¹.K⁻¹, 5 T) at 300 K can be a potential magnetic refrigerant material at ambient temperatures.