首页 | 官方网站   微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
A new robust adaptive iterative learning control approach is proposed for discrete‐time nonlinear systems with both parametric and nonparametric uncertainties. By virtue of a well‐designed dead‐zone function, the learning of the parametric and nonparametric uncertainties can be performed concurrently. Rigorous Lyapunov function‐based analysis ensures that the effect of system uncertainties can be fully compensated, and the tracking error will converge to zero asymptotically in the iteration domain, even under random initial conditions and iteration‐varying reference trajectories. The efficacy of the proposed controller is demonstrated by simulating a single‐link robot manipulator with unknown frictions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

2.
Without using Nussbaum gain, a novel method is presented to solve the unknown control direction problem for discrete‐time systems. The underlying idea is to fully exploit the convergence property of parameter estimates in well‐known adaptive algorithms. By incorporating two modifications into the control and the parameter update laws, respectively, we present an adaptive iterative learning control scheme for discrete‐time varying systems without the prior knowledge of the sign of control gain. It is shown that the proposed adaptive iterative learning control can achieve perfect tracking over the finite time interval while all the closed‐loop signals remain bounded. An illustrative example is presented to verify effectiveness of the proposed scheme. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

3.
In this paper, adaptive set‐point regulation controllers for discrete‐time nonlinear systems are constructed. The system to be controlled is assumed to have a parametric uncertainty, and an excitation signal is used in order to obtain the parameter estimate. The proposed controller belongs to the category of indirect adaptive controllers, and its construction is based on the policy of calculating the control input rather than that of obtaining a control law. The proposed method solves the adaptive set‐point regulation problem under the assumption that the target state is reachable for each fixed parameter value. Additional feature of the proposed method is that Lyapunov‐like functions have not been used in the construction of the controllers. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

4.
The aim of this study was to design an adaptive control strategy based on recurrent neural networks (RNNs). This neural network was designed to obtain a non‐parametric approximation (identification) of discrete‐time uncertain nonlinear systems. A discrete‐time Lyapunov candidate function was proposed to prove the convergence of the identification error. The adaptation laws to adjust the free parameters in the RNN were obtained in the same stability analysis. The control scheme used the states of the identifier, and it was developed fulfilling the necessary conditions to establish a behavior comparable with a quasi‐sliding mode regime. This controller does not use the regular form of the switching function that commonly appears in the sliding mode control designs. The Lyapunov candidate function to design the controller and the identifier simultaneously requires the existence of positive definite solutions of two different matrix inequalities. As consequence, a class of separation principle was proven when the RNN‐based identifier and the controller were designed by the same analysis. Simulations results were designed to show the behavior of the proposed controller solving the tracking problem for the trajectories of a direct current (DC) motor. The performance of the proposed controller was compared with the solution obtained when a classical proportional derivative controller and an adaptive first‐order sliding mode controller assuming poor knowledge of the plant. In both cases, the proposed controller showed superior performance when the relation between the tracking error convergence and the energy used to reach it was evaluated. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

5.
In this paper, the discontinuous projection‐based adaptive robust control (ARC) approach is extended to a class of nonlinear systems subjected to parametric uncertainties as well as all three types of nonlinear uncertainties—uncertainties could be state‐dependent, time‐dependent, and/or dynamic. Departing from the existing robust adaptive control approach, the proposed approach differentiates between dynamic uncertainties with and without known structural information. Specifically, adaptive robust observers are constructed to eliminate the effect of dynamic uncertainties with known structural information for an improved steady‐state output tracking performance—asymptotic output tracking is achieved when the system is subjected to parametric uncertainties and dynamic uncertainties with known structural information only. In addition, dynamic normalization signals are introduced to construct ARC laws to deal with other uncertainties including dynamic uncertainties without known structural information not only for global stability but also for a guaranteed robust performance in general. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

6.
In this paper, a periodic adaptive control approach is proposed for a class of discrete‐time parametric systems with non‐sector nonlinearities. The proposed periodic adaptive control law is characterized by either one‐period delayed parametric updating or two‐period delayed parametric updating when input gain contains periodic unknowns. Logarithmic‐type discrete Lyapunov function is employed to handle the difficulties caused by the uncertainties that do not satisfy the linear growth condition. Some extensions to nonlinear systems with multiple unknown parameters and time‐varying input gain, tracking tasks, as well as higher‐order systems in canonical form, are also discussed. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

7.
This work presents a new adaptive control algorithm for a class of discrete‐time systems in strict‐feedback form with input delay and disturbances. The immersion and invariance formulation is used to estimate the disturbances and to compensate the effect of the input delay, resulting in a recursive control law. The stability of the closed‐loop system is studied using Lyapunov functions, and guidelines for tuning the controller parameters are presented. An explicit expression of the control law in the case of multiple simultaneous disturbances is provided for the tracking problem of a pneumatic drive. The effectiveness of the control algorithm is demonstrated with numerical simulations considering disturbances and input‐delay representative of the application.  相似文献   

8.
Rejection of unknown periodic disturbances in multi‐channel systems has several industrial applications that include aerospace, consumer electronics, and many other industries. This paper presents a design and analysis of an output‐feedback robust adaptive controller for multi‐input multi‐output continuous‐time systems in the presence of modeling errors and broadband output noise. The trade‐off between robust stability and performance improvement as well as practical design considerations for performance improvements are presented. It is demonstrated that proper shaping of the open‐loop plant singular values as well as over‐parameterizing the controller parametric model can significantly improve performance. Numerical simulations are performed to demonstrate the effectiveness of the proposed scheme. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

9.
In this paper, adaptive finite‐time control is addressed for a class of high‐order nonlinear systems with mismatched disturbances. An adaptive finite‐time controller is designed in which variable gains are adjusted to ensure finite‐time stabilization for the closed‐loop system. Chattering is reduced by a designed adaptive sliding mode observer which is also used to deal with the mismatched disturbances in finite time. The proposed adaptive finite‐time control method avoids calculating derivative repeatedly of traditional backstepping methods and reduces computational burden effectively. Three numerical examples are given to illustrate the effectiveness of the proposed method.  相似文献   

10.
In this paper, an adaptive fuzzy backstepping dynamic surface control approach is considered for a class of uncertain pure‐feedback nonlinear systems with immeasurable states. Fuzzy logic systems are first employed to approximate the unknown nonlinear functions, and then an adaptive fuzzy state observer is designed to estimate the immeasurable states. By the combination of the adaptive backstepping design with a dynamic surface control technique, an adaptive fuzzy output feedback backstepping control approach is developed. It is proven that all the signals of the resulting closed‐loop system are semi‐globally uniformly ultimately bounded, and the observer and tracking errors converge to a small neighborhood of the origin by choosing the design parameters appropriately. Simulation examples are provided to show the effectiveness of the proposed approach. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

11.
The sliding mode control method has been extensively employed to stabilize time delay systems with nonlinear perturbations. Although the resulting closed‐loop systems have good transient and steady‐state performances, the designed controllers are dependent on the time delays. But one knows that it is difficult to obtain the precise delay time in practical systems, especially when it is time varying. In this paper, we revisit the problem and use the backstepping method to construct the state feedback controller. First, a coordinate transformation is used to obtain a cascade time delay system. Then, a linear virtual control law is designed for the first subsystem. The memoryless controller is further constructed based on adaptive method for the second subsystem with the uncertainties bounded by linear function. By choosing new Lyapunov–Krasovskii functional, we show that the system state converges to zero asymptotically. Via the proposed approach, we also discuss the case that the uncertainties are bounded by nonlinear functions. Finally, simulations are done to verify the effectiveness of the main results obtained. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

12.
In this paper, the problem of adaptive neural control is discussed for a class of strict‐feedback time‐varying delays nonlinear systems with full‐state constraints and unmodeled dynamics, as well as distributed time‐varying delays. The considered nonlinear system with full‐state constraints is transformed into a nonlinear system without state constraints by introducing a one‐to‐one asymmetric nonlinear mapping. Based on modified backstepping design and using radial basis function neural networks to approximate the unknown smooth nonlinear function and using a dynamic signal to handle dynamic uncertainties, a novel adaptive backstepping control is developed for the transformed system without state constraints. The uncertain terms produced by state time delays and distributed time delays are compensated for by constructing appropriate Lyapunov‐Krasovskii functionals. All signals in the closed‐loop system are proved to be semiglobally uniformly ultimately bounded. A numerical example is provided to illustrate the effectiveness of the proposed design scheme.  相似文献   

13.
In this paper, we address the problem of designing robust thresholds for fault detection in discrete‐time nonlinear uncertain systems in the presence of process disturbances. Both constant and dynamic thresholds are proposed. For the computation of constant thresholds, a generalized framework based on signal norms is developed. Different kinds of constant thresholds are studied in the framework proposed. Using linear matrix inequalities (LMI) techniques, algorithms are derived for the computation of these thresholds. Similarly, the dynamic threshold is designed by deriving an inequality on the upper bound of the modulus of the residual signal. This inequality is based on the solution of discrete‐time nonlinear uncertain systems. The simulation examples illustrate that false alarms are successfully eliminated using the proposed thresholds. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

14.
This paper presents a design method for robust model matching control of nonminimum‐phase discrete‐time systems. This scheme can robustly control the nominal model in the presence of unmodeled dynamics and can achieve the desired model matching simultaneously. Furthermore, the sufficient condition for stabilizing the nominal model in the presence of the unmodeled dynamics is derived and the existence of bounds for all signals is proved. Finally, computer simulation results are presented to illustrate the effectiveness of the proposed method. © 1999 Scripta Technica, Electr Eng Jpn, 128(2): 36–44, 1999  相似文献   

15.
This paper investigates the global adaptive finite‐time stabilization of a class of switched nonlinear systems, whose subsystems are all in p (p≤1) normal form with unknown control coefficients and parametric uncertainties. The restrictions on the power orders and the nonlinear perturbations are relaxed. By using the parameter separation technique, the uncertain parameters are separated from nonlinear functions. A systematic design procedure for a common state feedback controller and a switching adaptive law is presented by employing the backstepping methodology. It is proved that the closed‐loop system is finite‐time stable under arbitrary switching by utilizing the common Lyapunov function. Finally, with the application to finite‐time control of chemical reactor systems, the effectiveness of the proposed method is demonstrated. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

16.
This paper considers the problem of adaptive neural tracking control for a class of nonlinear stochastic pure‐feedback systems with unknown dead zone. Based on the radial basis function neural networks' online approximation capability, a novel adaptive neural controller is presented via backstepping technique. It is shown that the proposed controller guarantees that all the signals of the closed‐loop system are semi‐globally, uniformly bounded in probability, and the tracking error converges to an arbitrarily small neighborhood around the origin in the sense of mean quartic value. Simulation results further illustrate the effectiveness of the suggested control scheme. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

17.
Discrete‐time model reference adaptive control (MRAC) is considered with both least squares and projection algorithm parameter identification. For both cases complete Lyapunov proofs are given for stability and convergence. The results extend the approach of Johansson (Int. J. Control 1989; 50 (3):859–869) to include Lyapunov stability for MRAC when the normalized projection algorithm is used for parameter identification. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

18.
针对一类未知非线性时滞系统,提出了一种自适应神经网络控制设计方案,将Backstepping、占有方法以及自适应界化技术结合起来构造了一个鲁棒自适应神经网络跟踪控制器,采用神经网络逼近未知时滞函数,放松了对非线性时滞函数的要求。通过构建一个恰当的Lyapunov-Krasoviskii泛函证明了闭环系统所有信号半全局一致最终有界,调节设计参数可以实现任意输出跟踪精确度。实例仿真说明了该方案的可行性。  相似文献   

19.
The article discusses the adaptive fixed-time control problems for the stochastic pure-feedback nonlinear systems. Different from the existing results, the priori information of unknown virtual control coefficients (UVCC) is no longer needed in this article, which is realized by emplying the bound estimation method and well-defined smooth functions. A novel semi-global practical fixed-time stability criterion for the stochastic nonlinear systems is presented. Correspondingly, a new construction of Lyapunov function is proposed for the nonlinear stochastic system by adding the lower bounds of the UVCC. Based on the fuzzy logical system and fixed time stability theorem, a novel adaptive fuzzy fixed-time tracking control algorithm for stochastic nonlinear system is raised firstly. By theoretical analysis, we can conclude that the whole variables of the controlled system are bounded almost surely and the output can track the desired reference signal to a very small compact set within a predefined fixed-time interval. Finally, the raised method is illustrated by two simulation examples.  相似文献   

20.
In this paper, an adaptive dynamic surface control approach is developed for a class of multi‐input multi‐output nonlinear systems with unknown nonlinearities, bounded time‐varying state delays, and in the presence of time‐varying actuator failures. The type of the considered actuator failure is that some unknown inputs may be stuck at some time‐varying values where the values, times, and patterns of the failures are unknown. The considered actuator failure can cover most failures that may occur in actuators of the systems. With the help of neural networks to approximate the unknown nonlinear functions and combining the dynamic surface control approach with the backstepping design method, a novel control approach is constructed. The proposed design method does not require a priori knowledge of the bounds of the unknown time delays and actuator failures. The boundedness of all the closed‐loop signals is guaranteed, and the tracking errors are proved to converge to a small neighborhood of the origin. The proposed approach is employed for a double inverted pendulums benchmark as well as a chemical reactor system. The simulation results show the effectiveness of the proposed method. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号