共查询到14条相似文献,搜索用时 296 毫秒
1.
地铁用高压接线箱必须满足在复杂工况作用下的静强度要求.依据标准BS EN 12663 1:2010的要求,用MSC Nastran分析某地铁用高压接线箱静强度.分析结果表明该地铁用高压接线箱所用材料满足强度要求. 相似文献
2.
依据EN 12663-1-2010标准对地铁车头车车体进行静强度仿真,并将仿真结果与试验数据结果进行对比,发现两者具有良好的一致性.但是,在一位端窗台压缩工况中,牵引梁缓冲区4个测点位置误差超过30%;基于试验的应变片尺寸与模型网格尺寸差异造成的误差,利用子模型方法对该区域进行网格单元细化,将误差降为5.88%,14.62%,18.99%和7.46%. 相似文献
3.
建立高速动车组铝合金车体有限元模型,依据EN12663标准设置计算工况,通过试验验证了有限元模型的准确性,最后根据DVS1608进行疲劳强度评估。计算结果表明静强度结果均小于车体相关结构的许用应力,试验和仿真结果控制在15%以内。选用DVS1608标准对于铝合金车体进行疲劳强度评估时,使用多轴应力评估方法计算母材和焊缝的利用度。对有限元计算结果进行处理,得到适用于评价标准的方向应力,最终得到各个评估点总的利用度。最后考虑了载荷循环对母材或者焊缝许用疲劳强度的影响,对评估点总利用度进行修正。计算结果表明,所有工况得到的最大应力值都满足材料或者焊缝的屈服强度,并且有一定的富裕量。 相似文献
4.
5.
6.
某工程车在可靠性道路试验发动机怠速过程中由于副水箱抖动厉害而出现开裂的现象。本文运用Pro/ENGINEER软件建立副水箱及安装支架的三维模型,运用有限元仿真平台ANSYS Workbench对副水箱安装支架进行强度失效原因分析,并根据分析结果改进安装支架结构形式,经试验验证了结构与方法的正确性。 相似文献
7.
8.
首先对某型发动机改型压气机盘的初始设计进行了强度分析;由于不能满足强度要求,对其进行了结构优化设计,并对优化后的轮盘进行了应力计算,并考虑叶片的影响,建立了叶盘结构有限元模型进行了强度计算,计算结果表明该轮盘均可以满足强度要求,从而为某型发动机的改进设计提供了重要参考依据。 相似文献
9.
10.
11.
目前各设计院在铁路油罐设计中多采用标准图,通常都不进行强度及抗震等要求的验算.在抗震设防烈度要求较高地区,标准油罐的罐底环形边缘板厚度和各圈罐壁有效壁厚往往达不到要求.通过开发适用于铁路机务设计中的油罐抗震验算软件,不但可以提高机务设计效率,还能保证设计储罐的安全可靠性. 相似文献
12.
Sergio Feo-Arenis Bernd Westphal Daniel Dietsch Marco Muñiz Siyar Andisha Andreas Podelski 《Formal Aspects of Computing》2016,28(3):499-527
The design of distributed, safety-critical real-time systems is challenging due to their high complexity, the potentially large number of components, and complicated requirements and environment assumptions that stem from international standards. We present a case study that shows that despite those challenges, the automated formal verification of such systems is not only possible, but practicable even in the context of small to medium-sized enterprises. We considered a wireless fire alarm system, regulated by the EN 54 standard. We performed formal requirements engineering, modeling and verification and uncovered severe design flaws that would have prevented its certification. For an improved design, we provided dependable verification results which in particular ensure that certification tests for a relevant regulation standard will be passed. In general we observe that if system tests are specified by generalized test procedures, then verifying that a system will pass any test following those test procedures is a cost-efficient approach to improve the product quality based on formal methods. Based on our experience, we propose an approach useful to integrate the application of formal methods to product development in SME. 相似文献
13.