颗粒态绿豆抗性淀粉的制备及性质研究

以绿豆淀粉为原料,采用湿热处理制备颗粒态抗性淀粉,并研究其颗粒形貌、直链淀粉含量、溶胀度、黏度及结晶性质等。试验表明:淀粉经过湿热处理后,抗性淀粉含量显著提高;湿热处理淀粉仍保持完整的颗粒外观,属于颗粒态抗性淀粉,部分淀粉颗粒表面出现了裂纹和凹坑,偏光十字强度有所减弱;湿热处理淀粉的直链淀粉含量明显增加,而溶解度、膨胀度和峰值黏度下降,淀粉糊化变得困难;X-射线衍射图谱表明原淀粉和湿热处理淀粉都为"A"型结晶,且湿热处理淀粉在15.2°、17.4°、22.9°左右的衍射峰强度有所加强。     

Effect of heat-moisture treatment on rice starch of varying amylose content

The effect of heat-moisture treatment (HMT) on the properties of rice starches with high-, medium- and low-amylose content was investigated. The starches were adjusted to 15%, 20% and 25% moisture levels, and heated at 110 °C for 1 h. The swelling power, solubility, pasting properties, morphology, enzymatic susceptibility and X-ray crystallinity of the starches were evaluated. HMT reduced the swelling power and solubility of the starches. The strongest effect of HMT occurred on the high-amylose starch; the pasting temperature was increased and the peak viscosity, breakdown, final viscosity and the setback were reduced. HMT increased the starch’s susceptibility to α-amylase and promoted a reduction in the starch relative crystallinity.     

Physicochemical,crystallinity, pasting and thermal properties of heat‐moisture‐treated pinhão starch

The effect of heat‐moisture treatment (HMT) on the properties of pinhão starches under different moisture and heat conditions was investigated. The starches were adjusted to 15, 20 and 25% moisture levels and heated to 100, 110 and 120°C for 1 h. The X‐ray diffractograms, swelling power, solubility, gel hardness, pasting properties and thermal properties of the native and HMT pinhão starches were evaluated. Compared to native starch, there was an increase in the X‐ray intensity and gel hardness of HMT starches, with the exception of the 25% moisture‐treated and 120°C heat‐treated starch. HMT reduced the swelling power and solubility of the pinhão starches when compared to native starch. There was an increase in the pasting temperature, final viscosity and setback and a decrease in the peak viscosity and breakdown of HMT pinhão starches compared to native starch. HMT increases the gelatinisation temperature of native pinhão starch and reduces gelatinisation enthalpy.     

Pasting,Thermal, Hydration,and Functional Properties of Annealed and Heat-Moisture Treated Starch of Sword Bean (Canavalia gladiata)

The effects of annealing (ANN) and heat-moisture treatments (HMT) on the physicochemical and functional properties of Sword bean starches were investigated. The pasting properties differ significantly among the starches, with peak viscosity ranging from 399.17 RVU to 438.33 RVU; however, all the starches exhibited ‘Type C’ class with restricted swelling. The HMT starches had the highest gelatinization temperature, while change in enthalpy of gelatinization, ΔH_gel of the native starch, was higher (13.82 J/g) than that of the modified starches (1.39–6.74 J/g). The solubility and swelling power of all the starches increased as the temperature increased. The oil and water absorption capacity of the starches ranges between 3.24–3.91 g/g and 2.42–3.35 g/g, respectively. HMT (at 25 and 30% moisture level) changes the X-ray diffraction pattern of the starch from Type ‘B’ to Type ‘C’. The Scanning electron micrograph results revealed the starch granules with smooth ellipsoids and indentation in their centre, hydrothermal modification showed little effect on the morphology and size of the granules. Hydrothermal modification improved the physicochemical and functional properties of the starch without destroying the granule of the starch.     

天然的,物理和化学改性的面包果淀粉的功能特性

淀粉从面包果中分离出来,它通过氧化、乙酰化、热湿处理和退火作用而深度改性。研究了天然和改性淀粉的功能特性,近似分析表明,通过退火、氧化和乙酰化作用改性的淀粉比天然淀粉有较高的湿度,而通过热湿作用改性的淀粉有较低的湿度。除了天然淀粉和退火淀粉有相同的天然纤维含量(042％)之外,其它改性淀粉的天然纤维含量均降低。通过改性之后,蛋白质和脂肪含量也降低了。乙酰化、氧化和热处理作用提高了天然淀粉的膨胀力。     

Hydrothermal Modifications of Tropical Tuber Starches. 1. Effect of Heat‐Moisture Treatment on the Physicochemical,Rheological and Gelatinization Characteristics

Cassava, sweet potato and arrowroot starches have been subjected to heat‐moisture treatment (HMT) under different conditions using a response surface design of the variables. A comparative study was performed on the pasting properties, swelling behaviour and the gelatinization properties of the modified starches and also on the rheological and textural properties of their pastes. X‐ray diffraction studies have shown that cassava starch exhibited a slight decrease in crystallinity, whereas sweet potato and arrowroot starches showed an increase in crystallinity after HMT at 120ºC for 14 h with 20% moisture. The swelling volume was reduced and the solubility was enhanced for all three starches after HMT, but both effects were more pronounced in the case of arrowroot starch. The decrease in paste clarity of the starch after HMT was higher in the case of cassava and sweet potato starches. Viscosity studies showed that the peak viscosity of all three starches decreased after HMT, but the paste stability increased as seen from the reduced breakdown ratio and setback viscosity. Studies on rheological properties have shown that storage and loss moduli were higher for the starches heat‐moisture treated at higher moisture and lower temperature levels than the corresponding native starches. Storage of the gel at ‐20ºC resulted in a significant increase in storage modulus for all the three starches. All the textural parameters of the gels were altered after the treatment which depended on the nature of the starch and also the treatment condition.     

Use of heat-moisture treated maize starch to modify the properties of wheat flour and the quality of noodles

Waxy, normal and high-amylose maize starches were subjected to heat-moisture treatment (HMT) and then added to wheat flour (WF) in different ratios (1%, 5% and 10%). The properties of blends and their cooked noodles were studied to investigate the effects of HMT starches. The incorporation of HMT starch in WF led to an increase in swelling power, peak viscosity and breakdown and to a decrease in setback, thus inhibiting retrogradation, hence enhancing resultant noodle softness. Compared to the same addition ratio of native starch to WF, HMT starch led to higher tensile strength and extensibility in resultant noodles. WF with added HMT starch had higher resistant starch than with native starch. This study showed that addition of HMT maize starch has potential to bring nutritional benefits. However, it is necessary to select the proper blending ratio and amylose content of starch to add, in consideration of its effect on noodle quality.     

Physicochemical, crystallinity, pasting and morphological properties of bean starch oxidised by different concentrations of sodium hypochlorite

The effect of bean starch oxidation at different active chlorine concentrations (0.5%, 1.0% and 1.5%) on the physicochemical, crystallinity, pasting and morphological properties of starch was investigated. The carbonyl content, carboxyl content, starch colour, swelling power, solubility, gel hardness, X-ray crystallinity, pasting properties, gelatinisation characteristics and morphology of the starches were evaluated. The bean starch oxidised with 0.5% active chlorine had the characteristic of a slightly crosslinked starch. As compared to the native and 0.5% active chlorine-oxidised starches, active chlorine at 1.0% and 1.5% increased the carbonyl content, carboxyl content and solubility of the starches. Moreover, these concentrations of active chlorine decreased the swelling power, gel hardness, relative crystallinity, breakdown, peak viscosity and setback, as compared to the native and 0.5% active chlorine-oxidised starches. The starch granules oxidised with 1.5% active chlorine had imperfections in their structure, and its surface appears to be rougher than the other granules.     

Effect of heat-moisture treatment on the formation and physicochemical properties of resistant starch from mung bean (Phaseolus radiatus) starch

Mung bean starch was subjected to a range of heat-moisture treatments (HMT) based on different moisture contents (15%, 20%, 25%, 30%, and 35%) all heated at 120 °C for 12 h. The impact on the yields of resistant starch (RS), and the microstructure, physicochemical and functional properties of RS was investigated. Compared to raw starch, the RS content of HMT starch increased significantly, with the starch treated at 20% moisture having the highest RS content. After HMT, birefringence remained at the periphery of the granules and was absent at the center of some granules. The shape and integrity of HMT starch granules did not change but concavity was observed under scanning electronic microscopy. Apparent amylose contents of HMT starch increased and the HMT starch was dominated by high molecular weight fraction. Both the native and HMT starches showed A-type X-ray diffraction pattern. Relative crystallinity increased after HMT. The gelatinization temperatures (To, Tp, and Tc), gelatinization temperature range (Tc–To) and enthalpies of gelatinization (ΔH) increased significantly in HMT starch compared to native starch. The solubility increased but swelling power decreased in HMT starches. This study clearly shows that the HMT exhibited thermal stability and resistance to enzymatic hydrolysis owing to stronger interactions of starch chains in granule.     

Glycerol-enhancing heat-moisture treatment of A-type rice and cassava starches and B-type potato and canna starches

Effects of glycerol on the heat-moisture treatment (HMT) of A-type rice and cassava starches and B-type potato and canna starches were investigated. Starch samples were soaked in water or glycerol solution, adjusted to 25% moisture, and then subjected to HMT at 100 °C for 1, 6, and 16 h. Pasting profiles of all four starches plasticised with water clearly showed the B-type potato and canna starches were more susceptible to HMT than the A-type rice and cassava starches. The effect of HMT on the pasting properties of glycerol-plasticised samples was inconclusive; the B-type canna and A-type cassava starches were altered, but not the B-type potato and A-type rice starches, which remained comparable to the water-plasticised samples. Thus, the type of plasticiser as well as the environment surrounding the crystalline region, which is specific to each starch type, also affect the alteration of starch during HMT.     

Microstructural and physicochemical properties of heat-moisture treated waxy and normal starches

Starches from normal rice (21.72% amylose), waxy rice (1.64% amylose), normal corn (25.19% amylose), waxy corn (2.06% amylose), normal potato (28.97% amylose) and waxy potato (3.92% amylose) were heat-treated at 100 °C for 16 h at a moisture content of 25%. The effect of heat-moisture treatment (HMT) on morphology, structure, and physicochemical properties of those starches was investigated. The HMT did not change the size, shape, and surface characteristics of corn and potato starch granules, while surface change/partial gelatinization was found on the granules of rice starches. The X-ray diffraction pattern of normal and waxy potato starches was shifted from B- to C-type by HMT. The crystallinity of the starch samples, except waxy potato starch decreased on HMT. The viscosity profiles changed significantly with HMT. The treated starches, except the waxy potato starch, had higher pasting temperature and lower viscosity. The differences in viscosity values before and after HMT were more pronounced in normal starches than in waxy starches, whereas changes in the pasting temperature showed the reverse (waxy > normal). Shifts of the gelatinization temperature to higher values and gelatinization enthalpy to lower values as well as biphasic endotherms were found in treated starches. HMT increased enzyme digestibility of treated starches (except waxy corn starch); i.e., rapidly and slowly digestible starches increased, but resistant starch decreased. Although there was no absolute consistency on the data obtained from the three pairs of waxy and normal starches, in most cases the effects of HMT on normal starches were more pronounced than the corresponding waxy starches.     

Physicochemical properties of pressure moisture treated (PMT) and heat moisture treated (HMT) starches

Physicochemical properties of pressure moisture treated (PMT, 550 MPa, 10 min) and heat moisture treated (HMT, 100 °C, 10 h) starches were investigated. Effects of PMT and HMT were different depending on starch type. PMT starches showed dramatic changes in moisture sorption isotherm, pasting properties, thermal characteristics, solubility and swelling power (at 90 °C), and in vitro digestibility. The most dramatic difference between PMT and HMT starches was amylopectin melting transition, i.e., broadening in PMT and shift to high temperature in HMT starches. Moreover, B- and C-type starches revealed the more increase in amylopectin melting enthalpy than A-type starch. Both PMT and HMT did not increase the crystallinity but reorganized the amorphous area to compact, resulting in lower rapidly digestible starch and higher slowly digestible starch than those of native starches. Consequently, PMT changed the digestibility and physicochemical properties of starches with different modes of action compared with HMT.     

Functional,thermal and molecular behaviours of ozone-oxidised cocoyam and yam starches

Ozone-oxidised starches were prepared from the native starches isolated from white and red cocoyam, and white and yellow yam cultivars. The native and oxidised starches were evaluated for functional, thermal and molecular properties. The correlations between the amount of reacted ozone and carbonyl and carboxyl contents of the starches were positive, as ozone generation time (OGT) increased. Significant differences were obtained in terms of swelling power, solubility, pasting properties and textural properties of the native starches upon oxidation. The DSC data showed lower transition temperatures and enthalpies for retrograded gels compared to the gelatinized gels of the same starch types. The native starches showed C_B-type XRD patterns while the oxidised starches resembled the C_A-type pattern. As amylose content increased, amylopectin contents of the starches decreased upon oxidation. Similarly, an increase in M_w values were observed with a corresponding decrease in M_n values upon oxidation.     

薯类淀粉种类对黄冈鱼面品质的影响

为研究薯类淀粉种类对黄冈鱼面品质的影响,测定了红薯淀粉（SPS1、SPS2、SPS3）、马铃薯淀粉（PS）、木薯淀粉（CS）的理化性质、糊化特性、粒径、溶解度及膨胀度,分析了这些性质与鱼面品质之间的关系。结果表明:不同薯类淀粉的理化性质、糊化特性、粒径、溶解度及膨胀度均存在显著差异（P<0.05）,红薯淀粉的糊化温度（78.37~79.97 ℃）最高,马铃薯淀粉的粒径、溶解度及膨胀度最大。不同薯类淀粉加工鱼面的质构特性、煮制品质、感官评价及色泽均存在显著差异（P<0.05）。红薯淀粉加工鱼面的硬度显著大于马铃薯淀粉、木薯淀粉（P<0.05）,红薯淀粉中SPS3加工鱼面的硬度最大。马铃薯淀粉加工鱼面的拉伸强度、吸水率及煮制损失率最大。SPS2加工鱼面的感官评价最高,CS加工鱼面的最低。不同薯类淀粉加工鱼面干燥前的色泽在亮度、红绿值和白度上差异显著（P<0.05）,但对鱼面干燥后的色泽影响并不明显。根据综合评分的大小对鱼面的品质进行排序为:SPS2>SPS1>SPS3>PS>CS。淀粉的糊化特性、直链淀粉含量、粒径与鱼面的品质具有显著的相关性（P<0.05）。     

Physico-Chemical Properties of Defatted Heat-Moisture Treated Starches

Physico-chemical properties of wheat- and potato starch, defatted before or after heat-moisture treatment, were compared with those of untreated starches. Effects on waterbinding capacity, swelling power, solubility, enzyme susceptibility, gelatinization temperature range, viscograph consistency and on functional properties such as cake baking performance and thickening power are reported. X-ray diffraction patterns of samples defatted before heating appeared slightly sharper than those of non-defatted, then heat-moisture treated samples. Defatting of wheat starch combined with heat-moisture treatment caused less reduction in relative crystallinity than heat-moisture treatment alone, enzyme susceptibility was reduced, viscograph consistencies increased and cake baking performance and thickening power of the starches improved. Defatting of potato starch combined with heat treatment had some positive effects on enzyme susceptibility, solubility and thickening power.     

Physicochemical Properties of Canna edulis Ker Starch on Heat-Moisture Treatment

Canna edulis Ker starch was modified by heat-moisture treatment at moisture levels ranging from 18 to 27 g/100 g starch and its physicochemical properties were investigated. Amylose content, swelling power, solubility as well as water and oil absorption capacity in native starch were higher than in all treated starches. However, alkaline water retention and acid susceptibility of native starch were lower, along with different extent of amylose leaching. The result in the X-ray diffraction measurement revealed that the crystalline type of the starch gradually changed from B-type to A-type, and the degree of crystallinity changed. Investigation on thermal properties showed that the gelatinization enthalpy decreased, whereas the onset temperature, peak temperature, concluding temperature and transition temperature range increased in modified starch than in native starch. In addition, all modified starches exhibited remarkably low values of peak viscosity, hot pasting viscosity and final viscosity, compared to those of native starch.     

湿热处理玉米淀粉的溶胀和水解性质初探

对三种不同链淀粉含量的玉米淀粉(高链玉米淀粉、普通玉米淀粉和蜡质玉米淀粉)经湿热处理前后的溶胀及酸、酶水解性质进行研究,探索湿热处理对淀粉微观性质的影响。研究结果表明:湿热处理后淀粉的膨胀度和溶解度较原淀粉减小;湿热处理淀粉在酸、酶作用初期水解率比原淀粉大,后期由于经湿热处理后淀粉链之间的重新结合,形成了新的双螺旋结构,结合更为紧密,酸、酶难于作用,水解率较原淀粉降低。     

湿热处理对甘薯淀粉流变特性的影响

目的:采用HAAKE MARSⅢ型流变仪研究不同湿热处理条件下甘薯淀粉的流变性。方法:通过控制湿热处理的水分(10%~30%)、温度(90~130 ℃)和时间(4~12 h)对甘薯淀粉进行湿热改性。结果:原淀粉与湿热改性淀粉的糊具有明显的剪切稀化行为,其流变曲线也服从Herschel-Bulkley模型。不同湿热处理条件下得淀粉糊浓度系数K、屈服应力τ₀均低于原淀粉(K_原=14.816 Pa·sn,τ_0原=10.322 Pa),流动特性指数n高于原淀粉(n_原=0.47)。随着湿热处理水分、温度与时间的增加,淀粉糊的K逐渐减小,τ₀则先增后减,湿热处理水分20%,温度110 ℃,时间8 h的屈服应力最大(τ_0上行线=5.683 Pa,τ_0下行线=12.423 Pa)。动态流变学特性表明:不论湿热改性与否,甘薯淀粉糊的储能模量(G')均大于损耗模(G″)。并且相对于原淀粉,湿热改性甘薯淀粉糊的黏弹性明显增加。结论:经过湿热处理,甘薯淀粉糊的浓度系数与屈服应力下降,非牛顿性减弱,黏弹性显著提高,更适合作为食品加工的辅料和添加剂。     

4种改性淀粉与明胶共混膜的制备与性质比较

该研究对4种改性淀粉（羟丙基二淀粉磷酸酯、羟丙基淀粉、氧化淀粉、氧化羟丙基淀粉）的溶解度、膨胀势、糊化特性、老化值进行了分析和比较。溶解度高、膨胀势小、糊化特性好、老化值低的淀粉,较适宜作为制备共混膜的原料。在此基础上加入甘油或聚乙二醇400（Polyethylene Glycol,PEG400）作为增容剂,并对配方中水和甘油加入量进行了初步摸索,运用紫外、扫描电镜和拉伸试验机测定共混膜的透光性、透水气性、微观形貌和机械性能。结果表明：羟丙基淀粉溶解度最高,为86.42%;膨胀势最低,为0.086%,稳定性更好;黏度较低,老化值较大,流动性高,易于成膜。为4种改性淀粉中最适宜和明胶共混的原料。利用紫外分光光度计进行全波长扫描测量透光率;利用不同时间水保留质量反应透水汽性;用扫描电镜放大500~6 000倍对微观形貌观察,用拉伸材料试验机对机械性能进行测试。通过比较,发现以羟丙基淀粉为原料的共混膜,具有较好的透明度（优于纯明胶样品的透光度）,良好的透水汽性和机械性能。微观形貌也是呈现出相容性较好的形态（SEM显示）,相较于PEG400,甘油作为增容剂时共混膜的微观形貌横截面均匀光滑,内容物相容性好。明胶:甘油:水质量比为1:9:3:13制得共混膜透光性、透水气性、机械性能最佳,具有较好的实际应用价值。     

冻融处理对淀粉膜结构、热稳定性、机械性能及物理性质的影响

本实验分别以天然马铃薯淀粉（potato starch,PS）、改性马铃薯淀粉（包括羟丙基二淀粉磷酸酯（hydroxypropyl distarch phosphate,HDP）、醋酸淀粉（acetate starch,AS）和氧化淀粉（oxidized starch,OS））为基材,通过流延法制备可食用淀粉膜,考察冻融处理对膜物理性质、机械性能、阻隔性能、微观结构和热稳定性的影响。X射线衍射结果表明,马铃薯来源的淀粉颗粒具有典型的B型晶体结构,在成膜过程中淀粉结晶度降低,冻融处理后淀粉膜晶体峰强度明显减弱。扫描电子显微镜观察结果显示,冻融处理破坏了淀粉膜的微观结构,其中PS膜上出现明显裂纹,AS膜上出现蜂窝和层状结构,而HDP和OS淀粉膜具有更完整的形态。热重分析结果表明,随着温度的升高,淀粉膜的热重曲线出现4 个质量损失阶段,分别对应水分散失、甘油挥发、淀粉解聚及淀粉分解,而冻融处理对膜热稳定性影响较小。常温条件下,PS膜具有最佳的机械性能,其拉伸强度为2.29 MPa,断裂伸长率为68.82%。在3 个冻融循环后,淀粉膜的拉伸强度至少增加了2 倍,断裂伸长率普遍降低,而溶解度和水蒸气透过率仅有轻微变化。综合考虑不同淀粉膜微观结构、机械性能、水蒸气透过率及水溶性,HDP膜表现出更好的冻融稳定性,可应用于冷冻低水分食品的保藏。