TiO2–BaTiO3 nanocomposite for electron capture in dye‐sensitized solar cells

Different compositions of TiO₂–BaTiO₃ nanocomposites are synthesized with various weight ratios for dye‐sensitized solar cell (DSSC) applications. TiO₂ and BaTiO₃ nanoparticles (NPs) are synthesized by sol‐gel and solvothermal methods, respectively and are employed as the photoanode electrodes. BaTiO₃ NPs have pure cubic perovskite crystal structure with an average size of 20‐40 nm, while TiO₂ NPs show pure anatase phase with 15‐30 nm size. The power conversion efficiency (PCE) enhancement of the cells is first attained by controlling the thickness of the films for light harvesting improvement. The fabricated DSSC composed of pure BaTiO₃ NPs with an optimal thickness of 25 μm shows efficiency of 6.83%, whereas that made of pure TiO₂ NPs with 14 μm thickness has cell efficiency of 7.24%. Further improvement of cell efficiency is achieved by preparation of binary oxide nanocomposites using TiO₂ and BaTiO₃ NPs with various weight ratios. The highest PCE of 9.40% is obtained for the nanocomposite with TiO₂:BaTiO₃=85:15 (wt%). The enhancement is assigned to less recombination of photo‐generated electrons and higher incident photon to current conversion yield as a result of rapid charge collection and higher dye sensitization.     

Oligomer ethylene glycol based electrolytes for dye‐sensitized solar cell

Oligomer ethylene glycol (O‐EG) based electrolytes without volatile components were prepared and used in dye‐sensitized solar cell (DSSC). The characteristics such as viscosity, ionic conductivity, and ionic activation energy of O‐EG based electrolytes including liquid, gel and solid states were investigated and compared. It is found that the gel and solid O‐EG electrolytes have two E_a values with the changed phase state by going with the increased temperature, and they can increase the onset of applied voltage for generating dark current in DSSCs as from 0.222 V with liquid O‐EG electrolyte to 0.420 V with gel and solid O‐EG electrolytes, which results in the enhanced light‐to‐electricity conversion efficiency from 1.4% with liquid to 1.82% with gel and 1.86% with solid electrolytes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Application of thermosetting organic solvent free polymer gel electrolyte in quasi‐solid‐state dye‐sensitized solar cell

A kind of thermosetting organic solvent free polymer gel electrolyte with oligomer ethylene glycol as liquid phase was prepared and applied in quasi‐solid‐state dye‐sensitized solar cell (QS‐DSSC). The viscosity and the ionic conductivity of the polymer gel electrolyte are sensitive to the changed temperature. The photovoltaic performance of QS‐DSSC is also improved with the increased temperature due to the increased ionic conductivity and diffusion coefficient of iodide in polymer gel electrolyte. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

用于敏化太阳能电池的二氧化钛光阳极材料

敏化太阳能电池是当前清洁能源领域的研究热点之一,有望成为第三代太阳能电池。二氧化钛作为敏化太阳能电池的光阳极材料之一被广泛研究。主要综述了近20 a来二氧化钛光阳极材料的结构进展,并从电子注入效率、电子传输和基底电荷收集效率方面评述了各种结构的应用特点。另外,描述了当代三明治状二氧化钛工作电极的超薄保形覆盖层、工作层和阻挡层。然后,重点介绍了用于电子传输工作层的二氧化钛一维纳米阵列的制备方法及特点。最后,展望了光阳极结构与合成方法的未来发展趋势。     

Theoretical modelling of the electrode thickness effect on maximum power point of dye‐sensitized solar cell

The maximum power point (MPP) of a dye‐sensitized solar cell (DSSC) is often more important than the open‐circuit voltage and the short‐circuit current as MPP better represents the DSSC power output and energy conversion efficiency. In this investigation, the DSSC J–V characteristics and MPP were studied using a simple theoretical electron diffusion model. Parametric analyses were performed to determine the particular effect of electrode thickness on the MPP output. The analytical results are well consistent with the experimental results published in the literature. In the optimization analysis, it was specially found that the optimal electrode thickness for the highest MPP is rather insensitive to the operating conditions. It implies that an optimally designed DSSC can be always operated at its highest MPP regardless of any geographical, seasonal, and solar hour factors. Such an important attribute facilitates the design and manufacture of DSSC for worldwide commercialization at competitive costs.     

Synergetic effect of graphene sheet and three‐dimensional crumpled graphene on the performance of dye‐sensitized solar cells

Herein, an improved structure of the dye‐sensitized solar cell (DSSC) is demonstrated which is composed of surface modified fluorine‐doped tin oxide (FTO) glass with graphene (GR) sheets and TiO₂ films incorporated with three‐dimensional crumped graphene (3‐D CGR)/GR sheets. The morphologies of the as‐prepared GR sheets on FTO glasses and 3‐D CGR/GR sheets/TiO₂ films were observed by field‐emission scanning electron microscopy. Light harvesting and charge recombination kinetics were investigated with a solar simulator and electrochemical impedance spectroscopy analysis. In addition to the reduced charge resistance by the GR modified FTO, the enhanced dye loading capability of the 3‐D CGR, and the rapid charge transport by the 2‐D GR sheets, the power conversion efficiency was 7.2%, which was an increase of 56% compared to a “conventional” structured DSSC. © 2015 American Institute of Chemical Engineers AIChE J, 62: 574–579, 2016     

Synthesis of quaternized ammonium iodide‐containing conjugated polymer electrolytes and their application in dye‐sensitized solar cells

A series of conjugated polymer electrolytes (CPEs) comprising fluorene/carbazole or thiophene/carbazole backbones with quaternized ammonium iodide groups were synthesized and used in polymer solution and polymer gel electrolytes in dye‐sensitized solar cells (DSSCs). The photovoltaic (PV) performances became markedly poorer with increasing CPE content for the DSSCs based on polymer solution electrolytes. However, the PV performances were not significantly affected with increasing CPE content for the DSSCs fabricated from poly(ethylene oxide) (PEO)/CPE blend‐based gel‐type electrolytes. Moreover, higher PV efficiencies and stabilities were obtained for the DSSCs based on PEO/CPE blend gel electrolytes as compared to the DSSCs based on PEO gel electrolyte. The electrochemical impedance and PV properties of the DSSCs based on polymer solution electrolytes and on polymer gel electrolytes were determined as a function of the CPE concentration. Copyright © 2010 Society of Chemical Industry     

染料敏化纳米薄膜太阳电池的研究进展

太阳电池可以直接将太阳光能转变为电能,是解决世界范围内的能源危机和环境污染的一条重要途径。染料敏化纳米薄膜太阳电池具有廉价的原材料和简单的制作工艺以及稳定的性能等优势,是一种很有发展前途的太阳电池。本文对这种电池的发展,特点及其染料敏化剂的研究进展进行了分析和总结。     

Boosting the photovoltaic performance of Zn2SnO4‐based dye‐sensitized solar cells by Si doping into Zn2SnO4

In the present work, Zn₂SnO₄ nanoparticles were doped with silicon to improve their electrical and optical properties by the conventional solid‐state reaction method. The results showed that the minimum electrical resistivity of about 0.09 Ωcm was obtained for Zn₂SnO₄ nanoparticles with 3% Si doping. The decrease in the electrical resistivity can be attributed to the insertion of Si⁺⁴ atoms into the Zn⁺² and/or Sn⁺⁴ sites and also the formation of more oxygen vacancies in the Zn₂SnO₄ lattice. The formation of the more oxygen vacancy defect states in Si‐doped Zn₂SnO₄ nanoparticles was verified by photoluminescence spectroscopy. The efficiency of a dye‐sensitized solar cell based on 3% Si‐doped Zn₂SnO₄ was significantly better, by about 81%, compared to that of a cell based on the undoped Zn₂SnO₄. The enhancement in the efficiency can be ascribed to the facilitation of electron transport throughout a photoelectrode due to increase in the charge carrier concentration which was caused by Si doping.     

Synthesis and characterization of poly(1‐vinyl‐3‐propylimidazolium) iodide for quasi‐solid polymer electrolyte in dye‐sensitized solar cells

The synthesis conditions of ionic liquid 1‐vinyl‐3‐propylimidazolium iodide (ViPrIm⁺I⁻) and Poly(1‐vinyl‐3‐propylimidazolium) iodide [P(ViPrIm⁺I⁻)] were studied in this work. P(ViPrIm⁺I⁻) as a single‐ion conductor providing iodine was designed to develop a quasi‐solid polymer electrolyte based on PVDF/PEO film for dye‐sensitized solar cells (DSSCs). The samples were characterized respectively by high‐performance liquid chromatography (HPLC), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance imaging (NMRI), gel permeation chromatography (GPC), etc. The results showed that the single‐ion conducting quasi‐solid polymer electrolyte (SC‐QPE) exhibited high ionic conductivity of 1.86 × 10⁻³ S cm⁻¹ at room temperature measured by CHI660C Electrochemical Workstation. Moreover, solar cells assembled using the SC‐QPE yielded an open‐circuit voltage of 0.83V, short‐circuit current of 8.01 mA cm⁻² and the conversion efficiency of 2.42%. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Solid‐state dye‐sensitized and bulk heterojunction solar cells using TiO2 and ZnO nanostructures: recent progress and new concepts at the borderline

In the field of photovoltaic energy conversion, hybrid inorganic/organic devices represent promising alternatives to standard photovoltaic systems in terms of exploiting the specific features of both organic semiconductors and inorganic nanomaterials. Two main categories of hybrid solar cells coexist today, both of which make much use of metal oxide nanostructures based on titanium dioxide (TiO₂) and zinc oxide (ZnO) as electron transporters. These metal oxides are cheap to synthesise, are non‐toxic, are biocompatible and have suitable charge transport properties, all these features being necessary to demonstrate highly efficient solar cells at low cost. Historically, the first hybrid approach developed was the dye‐sensitized solar cell (DSSC) concept based on a nanostructured porous metal oxide electrode sensitized by a molecular dye. In particular, solid‐state hybrid DSSCs, which reduce the complexity of cell assembly, demonstrate very promising performance today. The second hybrid approach exploits the bulk heterojunction (BHJ) concept, where conjugated polymer/metal oxide interfaces are used to generate photocurrent. In this context, we review the recent progress and new concepts in the field of hybrid solid‐state DSSC and BHJ solar cells based on TiO₂ and ZnO nanostructures, incorporating dyes and conjugated polymers. We point out the specificities in common hybrid device structures and give an overview on new concepts, which couple and exploit the main advantages of both DSSC and BHJ approaches. In particular, we show that there is a trend of convergence between both DSSC and BHJ approaches into mixed concepts at the borderline which may allow in the near future the development of hybrid devices for competitive photovoltaic energy conversion. Copyright © 2011 Society of Chemical Industry     

An ionic liquid‐based polymer with π‐stacked structure as all‐solid‐state electrolyte for efficient dye‐sensitized solar cells

An ionic liquid based polymer, poly(1‐ethyl‐3‐(acryloyloxy)hexylimidazolium iodide) (PEAI), was synthesized and employed as electrolyte to fabricate all‐solid‐state dye‐sensitized solar cells. The photophysical properties of PEAI were studied by UV–vis absorption spectroscopy and photoluminescence spectroscopy. PEAI exhibited significant hypochromism and red shift in UV–vis absorption spectra and large Stokes shifts in photoluminescence spectra, indicating the formation of a novel π‐stacked structure in which the imidazolium rings in the side chain were stacked. Without iodine in its preparation, DSC with PEAI electrolyte achieved a conversion efficiency of 5.29% under AM 1.5 simulated solar light irradiation (100 mW cm^?2). The side‐chain imidazolium π‐π stacking in PEAI played a key role in the holes transport from the photoanode to the counter electrode. Both the open‐circuit voltage and short‐circuit current density showed decreases with the increase in the content of iodine in PEAI electrolyte. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of polyaniline/TiO2 nanocomposite film with good adhesion behavior for dye‐sensitized solar cell application

In this study, novel Polyaniline (PAni)/TiO₂ nanocomposites were applied on fluoride‐doped tin oxide (FTO) glass to act as an efficient counter electrode in dye‐sensitized solar cell (DSSC) application. PAni/TiO₂ nanocomposites were synthesized via chemical oxidation process using di‐2‐ethylhexylsulfosuccinate sodium salt (NaDEHS) as dopant. The nanocomposites were characterized using fourier transform infrared and ultraviolet‐visible spectrometers. In the application of PAni as the counter electrode in the solar cell, the film showed poor adhesion on the FTO glass. Palm oil‐based alkyd was introduced into the nanocomposite mixture to improve the adhesion of the film. The findings in the work show that strong adhesion of PAni on FTO glasses has led to higher incident photon to current conversion efficiency (IPCE) in solar cell. The short circuit current (Jsc), Voc (open circuit voltage), and IPCE of the resulted PAni/TiO₂ counter electrode with good adhesion in DSSC are 15.8 mA/cm², 670 mV, and 3.0%, respectively. POLYM. COMPOS., 34:1884–1891, 2013. © 2013 Society of Plastics Engineers     

Semitransparent inverted polymer solar cells employing a sol-gel-derived TiO2 electron-selective layer on FTO and MoO3/Ag/MoO3 transparent electrode

We report a new semitransparent inverted polymer solar cell (PSC) with a structure of glass/FTO/nc-TiO₂/P3HT:PCBM/MoO₃/Ag/MoO₃. Because high-temperature annealing which decreased the conductivity of indium tin oxide (ITO) must be handled in the process of preparation of nanocrystalline titanium oxide (nc-TiO₂), we replace glass/ITO with a glass/fluorine-doped tin oxide (FTO) substrate to improve the device performance. The experimental results show that the replacing FTO substrate enhances light transmittance between 400 and 600 nm and does not change sheet resistance after annealing treatment. The dependence of device performances on resistivity, light transmittance, and thickness of the MoO₃/Ag/MoO₃ film was investigated. High power conversion efficiency (PCE) was achieved for FTO substrate inverted PSCs, which showed about 75% increase compared to our previously reported ITO substrate device at different thicknesses of the MoO₃/Ag/MoO₃ transparent electrode films illuminated from the FTO side (bottom side) and about 150% increase illuminated from the MoO₃/Ag/MoO₃ side (top side).     

Enhanced electron collection efficiency of nanostructured dye‐sensitized solar cells by incorporating TiO2 cubes

Herein, enhancement of dye‐sensitized solar cell (DSC) performance is reported by combining the merits of the dye loading of TiO₂ nanoparticles and light scattering, straight carrier transport path, and efficient electron collection efficiency of TiO₂ cubes. We fabricate DSC devices with various arrangement styles and compositions of the electrodes in the forms of monolayer and double layer films. For this purpose, the solvothermal synthesized TiO₂ cubic particles (100‐600 nm) are employed as the scattering layer, whereas TiO₂ nanoparticles (15‐30 nm) synthesized via a combination of solvothermal and sol‐gel routes are used as the active layer of devices. We improve the photovoltaic characteristics of DSCs by two mechanisms. First, the light harvesting of DSC devices made of nanoparticles is improved by controlling the thickness of monolayer films, reaching the highest efficiency of 7.0%. Second, the light scattering and electron collection efficiency are enhanced by controlling the composition of double layer films composed of mixtures of TiO₂ nanoparticles and cubes, obtaining the maximum efficiency of 8.21%. The enhancements are attributed to balance between charge transfer resistance and charge recombination of photo‐generated electrons as well as dye loading and light scattering.     

Effect of nano‐TiO2 dispersion on PEO polymer electrolyte property

Polymer electrolyte membranes based on poly(ethylene oxide) (PEO) doped with TiO₂ nanoparticles were synthesized by simple solution cast technique. Mesoporous TiO₂ film was prepared by doctor‐blade method. The modified polymer membranes and the mesoporous films were characterized by SEM, TEM, AFM, ionic conductivity, and J‐V measurements. Dye‐sensitized solar cells (DSSC) have been fabricated in which PEO‐polymer electrolyte doped with and without nano‐TiO₂ were sandwiched between porous TiO₂ and counter electrodes. The DSSC with nano‐TiO₂ doped polymer electrolyte shows better performance (1.68%) in comparison with pristine polymer electrolyte (1.07%), which is due to improved ionic conductivity value in polymer electrolyte system by nano‐TiO₂ doping. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Fabrication of thin film nanocrystalline TiO2 solar cells using ruthenium complexes with carboxyl and sulfonyl groups

Two ruthenium complexes with carboxyl and sulfonyl groups have been synthesized, [Ru^II(L1)₂(NCS)₂] Ru^IIbis(4,7-diphenyl-1,10-phenanthroline-disulfonic acid disodium salt)-di(thiocyanate) [K313], [Ru^II(L1)₂(dcbpy)] Ru^II bis(4,7-diphenyl-1,10-phenanthroline-disulfonic acid disodium salt)(4,4′-dicarboxy-2,2′-bipyridyl) [K314] as photosensitizers. UV–vis, fluorescence emission, AFM and CV measurements are also supplied for ruthenium complexes. Photovoltaic properties of dye sensitized nanocrystalline semiconductor solar cells based on Ruthenium complexes which bear carboxyl and sunfonyl groups have been tested under standard AM 1.5 sunlight. Under the standard global AM 1.5 solar conditions, K314 and K313-sensitized solar cells demonstrate short circuit photocurrent densities of 14.92 mA/cm² and 11.23 mA/cm² and overall conversion efficiencies of 5.09% and 4.02%, respectively.     

Reaction induced multifunctional TiO2 rod/particle nanostructured materials for screen printed dye sensitized solar cells

This study investigates the potential of utilizing multifunctional nanostructured materials for the efficient light trapping and electron transport in solar cells by combining titanium dioxide (TiO₂) rods and nanoparticles. A simple solvothermal method was adopted for the synthesis of coupled morphology adopting the desired precursor with the constant concentration and temperature. The reaction duration (12, 24, 36 and 48 h) was varied and the materials resultant physical, optical and structural characteristics were elucidated to determine the nature of the prepared material. The crystallographic phase of the synthesized samples was determined with XRD and Raman analysis. From the experimental data it is hypothesized that the surface plane of anatase (105) is involved in the deformation of the structure and the formation of the rutile phase. To further investigate on the formation of mixed phase in the prepared sample a computation study was performed using density functional theory coupled to the Hubbard U correction (DFT + U) as a function of volume in both the anatase and rutile phases. The relative stability of the O–Ti–O networks is explored starting from ultrathin materials for four different sizes, of anatase and rutile nanorods separately. Finally, the synthesized TiO₂ materials were used to prepare screen printed dye sensitized solar cell (DSSC) devices and their respective properties were quantified.     

三维有序大/介孔TiO2反opal光阳极制备及光电性能

通过添加不同含量的造孔剂聚乙二醇2000（PEG2000）,在二氧化钛反蛋白石结构（TiO₂反opal）光阳极骨架结构中引入介孔结构,制备出了三维有序大/介孔TiO₂反opal光阳极。用SEM和TEM表征了该光阳极的表面形貌,应用紫外可见光谱表征了其染料吸附-脱附性能,测试了基于该光阳极结构的染料敏化太阳能电池的光电转换特性和阻抗特性。结果表明,介孔结构的引入使TiO₂反opal光阳极染料吸附能力增强,组装为染料敏化太阳能电池（DSSCs）后光电转换效率提高,电池交流阻抗降低。同时,随着PEG2000含量的增加,光电转换性能呈现先增加后减小的趋势,这可能来源于过量的PEG2000可造成宏孔骨架结构的破坏。     

Dithizone,carminic acid and pyrocatechol violet dyes sensitized metal (Ho,Ba& Cd) doped TiO2/CdS nanocomposite as a photoanode in hybrid heterojunction solar cell

Considering the great importance of nanocomposite based photo-active nanomaterials for a variety of electronics, photonics and photovoltaics application, it is always worth considering to synthesize new hetreostructure. This paper describes the sol-gel and hydrothermal synthesis of metal (holmium, barium, and cadmium) doped TiO₂/CdS nanocomposites for photoanode applications. Various characterization techniques, including XRD, FTIR, UV–VIS, EDX, and SEM were used to examine the synthesized heterostructures. The band gap of pure TiO₂ NPs is 3.10 eV, which was effectively decreased to 2.16 eV by doping and coupling with CdS. The nanomaterial's crystallinity, crystallite size, morphology and elemental composition were determined by XRD, SEM and EDX, respectively. As sensitizers, the organic dyes dithizone, carminic acid, and pyrocatechol violet were used. FTIR was used to analyze the effective dye grafting on the surface of nanomaterials. In the presence of hole conducting P3HT polymer as solid state electrolyte, the sensitized materials were evaluated for solid state dye-sensitized solar cells. Compared to the reference device, Cd–TiO₂/CdS photosensitized using Pyrocatechol violet dye demonstrated the highest efficiency of 2.68% (0.82%). Other parameters of this device, including open circuit voltage (Voc) and short circuit current (Jsc), were determined to be 16.97 mA cm² and 0.41V, respectively.