CdTe/CdSe核壳量子点的合成及其在指纹显现中的应用

以CdCl2和Te粉为原料,在水相中合成了CdTe量子点核;通过外延生长在CdTe量子点核上包覆一层CdSe量子点,得到具有良好荧光性能的CdTe/CdSe核壳量子点;采用X射线衍射仪、透射电镜、高分辨透射电镜分析了不同反应条件下合成的CdTe/CdSe核壳量子点的晶体结构和微观结构,并对其进行了荧光光谱等测试和指纹显现分析.结果表明,合成的CdTe和CdTe/CdSe量子点粒径在3～5nm之间,粒径分布窄,水分散性良好;可以通过控制反应时间和Te/Se比等得到在500～700nm显示荧光发射峰的CdTe/CdSe核壳量子点.此外,核壳CdTe/CdSe量子点可以有效地和指纹物质结合,可应用于对铝合金油潜指纹的鉴别.     

CdSe包覆层数对水溶性CdTe/CdSe (II型)核壳量子点的光学特性和微观结构的影响

在水相合成的CdTe量子点的体系中通过分批次加入新鲜配制的NaHSe和CdCl2溶液,制备出了CdSe包覆层数不同的CdTe/CdSe核壳量子点,并着重考察了CdSe包覆层数对CdTe/CdSe核壳量子点的光学特性以及微观结构的影响.与CdTe量子点相比,CdSe单层包覆的CdTe/CdSe核壳量子点的吸收峰和荧光发射峰出现明显红移;随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点吸收光谱的覆盖范围向长波方向扩展,荧光发射峰强度逐步下降,荧光寿命大幅延长,体现出Ⅱ型核壳量子点的特征.X射线衍射(XRD)分析表明,随着CdSe包覆层数的增多,CdTe/CdSe核壳量子点的粉末衍射峰由CdTe衍射峰位置逐步向CdSe衍射峰位置靠近.CdTe/CdSe核壳量子点因其延伸到近红外区域的宽吸收特性致使其在太阳电池领域具有重要的应用前景.     

CdSe/ZnS量子点探针用于检测猪链球菌2型溶菌酶释放蛋白(MRP)抗原的新方法研究

合成了高发光效率的CdSe/ZnS量子点并制备了CdSe/ZnS量子点-溶菌酶释放蛋白(MRP)抗体探针, 利用凝胶电泳和分子光谱法研究了MRP抗体与CdSe/ZnS量子点的结合机理. 荧光光谱法优化了CdSe/ZnS量子点-MRP抗体探针制备的影响因素, 建立了一种测定MRP抗原的新方法, 其线性范围为5.0×10－8～1.5×10－6 mol/L, 线性相关系数为0.9976, 检测限为 1.9×10－8 mol/L.     

基于CdSe/ZnS量子点构建乙酰甲胺磷荧光检测方法研究

本文以CdSe/ZnS量子点为荧光探针,基于乙酰甲胺磷对CdSe/ZnS量子点的荧光猝灭效应,建立了一种可快速测定乙酰甲胺磷的荧光检测方法。通过透射电子显微镜(TEM)、紫外-可见吸收光谱和荧光光谱对CdSe/ZnS量子点进行表征。在反应时间为5 min条件下,乙酰甲胺磷的浓度在0.487×10~(-6)～7.225×10~(-6) mol/L范围内与CdSe/ZnS量子点的荧光猝灭强度比值呈良好的线性关系(R~2=0.9987),方法检出限为2.55×10~(-7) mol/L。在2.0、5.0μmol/L加标水平下的回收率为94.5%～102.8%,相对标准偏差(RSD,n=5)小于4%。该方法选择性好,灵敏度高,可用于水果和蔬菜中农药乙酰甲胺磷的快速检测。     

以油胺-硒化氢复合物为前体的脂溶性量子点的制备

报道了一种以油胺-硒化氢复合物为前体的脂溶性CdSe量子点的制备方法. 将新制备的H2Se气体通入到油胺中, 得到油胺-硒化氢复合物, 以此复合物作为前体, 采用溶剂热合成法制备了CdSe量子点, 并采用荧光光谱、电镜以及X射线衍射对其进行了表征. 结果表明, CdSe量子点为立方晶型, 荧光半峰宽较窄(25~40 nm), 荧光量子产率可达23%, 并且荧光发射光谱从480到610 nm连续可调. 该方法无须使用三烷基膦, 是一种价廉环保的量子点制备方法.     

柠檬酸盐稳定的水溶性CdSe量子点的合成及表征

以柠檬酸三钠为稳定剂在水溶液中合成了水溶性CdSe量子点,用X射线粉末衍射、透射电镜、紫外-可见吸收光谱和荧光发射光谱对CdSe量子点的结构、形貌及其荧光性质进行了表征.结果表明合成的CdSe量子点为立方闪锌矿结构,呈球形,分散性良好,平均尺寸约为2.6nm,具有窄且对称的荧光发射光谱,半峰宽为45nm.     

基于CdSe/ZnS量子点构建多巴胺荧光检测方法的研究

以CdSe/ZnS量子点为荧光探针,基于多巴胺对CdSe/ZnS量子点的荧光猝灭效应,建立了一种可快速测定多巴胺的荧光检测方法。在最优实验条件下(pH7.4,反应时间20min),多巴胺浓度在0.01~0.7μmol/L范围内与CdSe/ZnS量子点的荧光猝灭强度比值呈良好的线性关系(r=0.996),方法检出限为1.6×10-4μmol/L,相对标准偏差为1.2%。与文献报道的方法相比,该方法的检出限更低,更为灵敏,可用于多巴胺注射液及人体尿样中多巴胺的快速检测。     

CdSe/CdS量子点荧光探针用于司帕沙星的测定

在规定的条件下和pH 11的碱性溶液中,通过镉（Ⅱ）、巯基乙酸（TGA）与硒化氢钾乙醇溶液之间的反应制得TGA修饰的CdSe量子点（QD′s）,再将此量子点和硫化钠溶液反应制得TGA修饰的CdSe/CdS量子点。基于喹诺酮类抗生素司帕沙星与CdSe/CdS量子点的荧光猝灭作用,用CdSe/CdS量子点作为荧光探针测定了...     

巯基乙酸为稳定剂在MWCNTs上原位生长CdSe量子点

以巯基乙酸作为稳定剂在无毒的溶剂中和较低的温度下实现了CdSe量子点在MWCNTs（多壁碳纳米管）上的原位生长,并用TEM、HRTEM、EDS、XRD、XPS和PL等工具对CdSe量子点-MWCNTs异质结（CdSe-MWCNTs）进行了表征.结果表明, CdSe量子点的晶型为立方晶型,平均粒径大约为4 nm, CdSe-MWCNTs也具有一定的荧光性质.     

荧光光谱法研究纳米二氧化钛光催化降解核壳型CdSe/ZnS量子点

在光诱导条件下,利用纳米二氧化钛(P25)对荧光物质核壳型CdSe/ZnS量子点进行光催化降解实验,通过荧光光谱法与传统分光光度法对比研究,测定降解液的吸光度来进行分析与评价降解率,从而判断降解程度和效率.光催化降解结果表明:对荧光物质CdSe/ZnS量子点的荧光淬灭程度(F/F0)与反应时间(t)呈线性关系,符合CdSe/ZnS量子点光催化降解动力学拟合方程,证明了荧光光谱法与传统吸光光度检测结果的一致性.建立了一种高效灵敏检测光催化降解荧光物质方法,有助于分析荧光物质的光催化降解机理,为光催化降解其它荧光物质的相关研究提供参考.     

Optimized Synthesis and Fluorescence Spectrum Analysis of CdSe Quantum Dots

An optimized synthesis route was applied for controlling the preparation of CdSe quantum dots (QDs) in an aqueous solution. Some key factors which influencing the properties of CdSe QDs, such as initial pH, stabilizers, ratio of precursor, etc. were investigated. The size, shape, crystal structure, and optical property of CdSe QDs were also characterized by TEM, XRD, UV-Vis, and fluorescence (FL) spectra. The result showed that high-quality cubic CdSe QDs with 3 nm were obtained. The experiments also confirmed that thioglycolic acid (TGA), under the conditions of weak acid, is a better stabilizer than others. The ratio of [Cd²⁺] to [SeSO₃ ^2?] played an important role in the formation of CdSe QDs. The mechanisms about the influence factors were also presented.     

水溶性的高荧光CdTe/CdSeⅡ型核壳量子点的合成与表征

用L-半胱氨酸(L-cysteine)作为稳定剂,以制备的CdTe量子点为核模板,水相合成了具有近红外发光的Ⅱ型核壳CdTe/CdSe半导体量子点。实验考察了合成温度,核模板的尺寸和组分比等因素对合成高质量的CdTe/CdSe量子点的影响。用紫外-可见吸收和荧光光谱研究了合成的量子点的光学性质。在优化的合成条件下,荧光发射光谱在586～753nm范围连续可调,荧光量子产率高达68%;通过X-射线衍射(XRD),X射线光电子能谱(XPS)和透射电镜(TEM)对合成的Ⅱ型核壳CdTe/CdSe量子点进行了结构和形貌表征。     

The Application of CdSe Quantum Dots with Multicolor Emission as Fluorescent Probes for Cell Labeling

Herein, highly luminescent CdSe quantum dots (QDs) with emissions from the blue to the red region of visible light were synthesized by using a simple method. The emission range of the CdSe QDs could be tuned from λ=503 to 606 nm by controlling the size of the CdSe QDs. Two amino acids, L ‐tryptophan (L ‐Trp) and L ‐arginine (L ‐Arg), were used as coating agents. The quantum yield (QY) of CdSe QDs (green color) with an optimized thickness could reach up to 52 %. The structures and compositions of QDs were examined by using X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Optical properties were studied by using UV/Vis and photoluminescence (PL) spectroscopy and a comparison was made between uncoated and coated CdSe QDs. The amino acid‐modified β‐cyclodextrin (CD)‐coated CdSe QDs presented lower cytotoxicity to cells for 48 h. Furthermore, amino acid‐modified β‐CD‐coated green CdSe QDs in HepG2 cells were assessed by using confocal laser scanning fluorescence microscopy. The results showed that amino acid‐modified β‐CD‐coated green CdSe QDs could enter tumor cells efficiently and indicated that biomolecule‐coated QDs could be used as a potential fluorescent probe.     

高质量CdSe量子点的水相制备与表征

以巯基丁二酸为稳定剂, 亚硒酸钠为硒源, 制备了高质量水溶性CdSe量子点. 研究了反应时间、 镉与硒的摩尔比及镉与巯基丁二酸的摩尔比等实验条件对CdSe量子点光谱性能的影响. 分别用紫外-可见光谱、 荧光光谱、 X射线粉末衍射和透射电子显微镜等对量子点进行表征. 结果表明, 采用这种方法制得的CdSe量子点为立方晶型, 量子点的荧光发射峰在518～562 nm范围内连续可调, 并且发射峰的半峰宽始终保持在35 nm左右, 荧光量子产率可达21%.     

Synthesis of CdSe quantum dots using selenium dioxide as selenium source and its interaction with pepsin

A novel method has been developed for the synthesis of thioglycolic acid (TGA)-capped CdSe quantum dots (QDs) in an aqueous medium when selenium dioxide worked as a selenium source and sodium borohydride acted as a reductant. The interaction between CdSe QDs and pepsin was investigated by fluorescence spectroscopy. It was proved that the fluorescence quenching of pepsin by CdSe QDs was mainly a result of the formation of CdSe-pepsin complex. Based on the fluorescence quenching results, the Stern-Volmer quenching constant (Ksv), binding constant (KA) and binding sites (n) were calculated. According to the Foster's non-radiative energy transfer theory, the binding distance (r) between pepsin and CdSe QDs was obtained. The influence of CdSe QDs on the conformation of pepsin has been analyzed by synchronous fluorescence spectra, which provided that the secondary structure of pepsin has been changed by the interaction of CdSe QDs with pepsin.     

3-巯基丙酸修饰的CdSe/ZnS量子点的合成及测定牛血清白蛋白的研究

以3-巯基丙酸作为修饰剂,在水溶液中合成了稳定的CdSe/ZnS量子点(QDs),透射电镜观察所合成量子点的形貌近似球形,粒径约为25 nm.吸收光谱与荧光光谱的研究表明,CdSe QDs在410 nm处有最大吸收峰,而CdSe/ZnS QDs的最大吸收峰在470 nm处,CdSe/ZnS QDs的荧光强度是CdSe QDs的11倍.考察了缓冲溶液的体积、pH值、反应温度、反应时间对体系荧光的影响.在最佳实验条件下,体系的荧光强度与BSA的浓度呈线性关系,线性响应范围为0.746×10-7～4.48×10-7 mol/L,检出限为3.846×10-10 mol/L.并且CdSe/ZnS QDs荧光强度基本保持稳定,可达两个多月.该方法应用于合成样品的测定,结果满意.     

Study on the interaction between CdSe quantum dots and hemoglobin

The interaction between CdSe quantum dots (QDs) and hemoglobin (Hb) was investigated by ultraviolet and visible (UV-vis) absorption spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and fluorescence (FL) spectroscopy. The intensity of UV-vis absorption spectrum of a mixture of CdSe QDs and Hb was obviously changed at the wavelength of 406nm at pH 7.0, indicating that CdSe QDs could bind with Hb. The influences of some factors on the interactions between CdSe QDs and Hb were studied in detail. The binding molar ratio of CdSe QDs and Hb was 12:1 by a mole-ratio method. The mechanism of the interaction between CdSe QDs and Hb was also discussed.     

Controlled synthesis of CdSe quantum dots by a microwave-enhanced process: a green approach for mass production

A method that does not employ hot-injection techniques has been developed for the size-tunable synthesis of high-quality CdSe quantum dots (QDs) with zinc blende structure. In this environmentally benign synthetic route, which uses less toxic precursors, solvents, and capping ligands, CdSe QDs that absorb visible light are obtained. The size of the as-prepared CdSe QDs and thus their optical properties can be manipulated by changing the microwave reaction conditions. The QDs were characterized by XRD, TEM, UV/Vis, FTIR, time-resolved fluorescence spectroscopy, and fluorescence spectrophotometry. In this approach, the reaction is conducted in open air and at a much lower temperature than in hot-injection techniques. The use of microwaves in this process allows for a highly reproducible and effective synthesis protocol that is fully adaptable for mass production and can be easily employed to synthesize a variety of semiconductor QDs with the desired properties. Possible applications of the CdSe QDs were assessed by deposition on TiO(2) films.