常温常湿条件下Au/MeO~x催化剂上CO氧化性能

利用共沉淀法制备了Au/MeO~x催化剂(Me=Al,Co,Cr,Cu,Fe,Mn,Ni,Zn)。在常温常湿条件下,考察了不同氧化物负载的金基催化剂的CO氧化性能。结果表明,氧化物种类对催化剂的活性和稳定性均有较大的影响。Cu,Mn,Cr等氧化物负载的金基催化剂的活性较差,而Zn,Fe,Co,Ni,Al等金属氧化物负载的金基催化剂可将CO完全氧化,又具有一定的稳定性,在相同反应条件下,CO完全转化时的稳定性顺序为Au/ZnO>Au/α-Fe~2O~3>Au/Co~3O~4>Au/γ-Al~2O~3≈Au/NiO。还发现水对Au/MnO~x催化剂的活性和稳定性有负作用,而对180℃焙烧制备的Au/ZnO-180催化剂的活性和稳定性均有明显的湿度增强作用。     

引言

中药在中国有着几千年的临床使用经验。随着民众对药品有效性和安全性认识的加深,中药质量受到越来越多的重视,中药质量控制也随之成为保障中药产业发展的重要因素之一和中药现代化研究的重要内容之一。由于中药的复杂性、多样性和物质基础研究的局限性,中药质量控制技术的发展成为中药质量控制的关键。随着中药物质基础、药理活性研究的深入和现代分离分析技术对复杂体系分析能力的提高,中药质量控制水平有了明显的提高;在认识到中药药效是多靶点、多成分的协同作用特点后,多指标成分定量成为中药含量测定的发展趋势。近年来,着重于从整体上进行质量控制的指纹图谱技术得到了广泛的关注和应用,并已被国外认可,成为建立国际性中药质量标准的技术纽带。各种色谱、光谱技术在指纹图谱中的运用及利用现代分离和检测技术获取海量数据,使人们对于中药的认识达到了一个新的高度。海量数据的化学计量学分析更成为鉴别中药真伪、优劣的科学依据。
中药质量控制是一个不断认识和深入的过程,新问题、新理念和新技术的层出不穷为我们提出了一个又一个的新课题。随着研究的深入,各方面的研究成果将为中药质量控制提供更为丰富的科学依据,中药质量控制技术也必然随着中药整体研究水平的提高而发展,并为中药的现代化和国际化做出巨大贡献。由于色谱技术在中药质量控制中发挥了巨大作用,本刊特别邀请了部分具有突出贡献的色谱专家、学者撰写了相关学术论文,在本期编辑出版了“中药质量控制”专栏。希望通过这些专栏文章所介绍的工作及思想,广集思路,不断创新,为进一步提高中药质量控制的研究水平作出贡献。     

食品标准体系的"漏洞"

食品安全关系着人民群众的身体健康和生命安全。自《标准化法》颁布以来,我国标准化工作为确保食品安全做出了较大的贡献。然而,随着经济发展和社会进步,现行的食品标准体系暴露出了许多问题和不足,近年来频频发生的食品质量安全事件,大都与食品标准存在的问题有关。标准化的宗     

锂/铌镁催化剂中碳酸锂的熔点与甲烷氧化偶联反应的活化和失活的关系

研究了铌掺杂的Li/MgO甲烷氧化偶联催化剂的反应性质及铌的助剂作用。铌的引入使得该催化剂上甲烷氧化偶联反应的活化温度降低50℃以上, 使此温度降到了催化剂中碳酸锂的熔点附近。试验观察到部分催化剂上甲烷氧化偶联反应的活性曲线在碳酸锂的熔点附近有一转折, 这一转折现象的出现与否及程度取决于制备条件。在碳酸锂的熔点附近, 含有铌的催化剂得到活化, 观察到无稀释气体时的反应引燃现象, 即温度增加几度活性便达到最大值。当在比碳酸锂熔点稍高的温度下且不稀释时反应, 含铌催化剂活性很高但很快失活, 在稍低于此熔点下则不失活, 但活性较低。这些试验结果表明, 含铌催化剂的活化与失活均与催化剂中的碳酸锂的相变化有关。试验还观察到了在稍高于碳酸锂的熔点下做寿命试验时, 甲烷氧化偶联反应的振荡现象。     

Na-W-Mn/SiO~2催化剂中Na-Mn协同作用的分子轨道研究

对于甲烷氧化偶联Na-W-Mn/SiO~2催化剂中组分效应的研究表明,单独担载Mn的催化剂非常活泼,具有很强的烃类氧化能力并导致深度氧化产物CO~x的形成;而Na的加入能抑制其活性并对提高催化剂的C~2选择性起了关键作用,对催化剂电子结构及不同金属中心分子轨道的研究揭示了Na-Mn协同作用的机制。催化剂中Na的存在将产生自由电子,处于体相的Mn将在-3eV附近产生空的能带。处于催化剂表面的Mn,无论以分散形式存在或是以氧化物团簇存在,其LUMO能级都很低,具有很强的氧化能力。加入Na以后,由Na产生的自由电子将处在体相Mn产生的空带或占据表面Mn-O中心的低LUMO轨道,其结果,一方面使Na的加入并不使催化剂呈现强的碱性而居致CO~2中毒;另一方面Mn-O中心接受电子后将抑制其强氧化能力保证了催化剂的高选择性。     

CXN天然沸石的研究2: 吸附性质

采用N~2,NH~3,CO~2,乙烯,丙烯,水,甲醇,乙醇,丙醇等作为吸附剂,研究了由我国CXN天然沸石改性制得的H-STI和Na-STI沸石的吸附性质,H-STI和Na-STI沸石的BET表面积及微孔孔体积约为420m^2/g和0.20m^3/g。根据NH~3和CO~2在H-STI沸石上的吸附等温线计算得到它们的吸附热分别为44.8和26.5kJ/mol。乙烯,丙烯,甲醇,乙醇,丙醇等在Na-STI沸石上的吸附等温线表明该沸石对有机分子的吸附具有链长选择性。在低分压下水相对于甲醇的吸附量表明沸石具有一定的疏水性质。     

鉴定用于细胞附着的配体的高通量方法

提供了用于鉴定能够在完整的细胞中产生想要的生物学反应的物质的高通量方法。所述方法包括步骤：提供具有培养表面的容器，将不同的包含单一物质的不同混合物放人选择的容器中，将所述单一物质混合物固定在所述培养表面上。所述方法还包括将被固定的物质与完整的细胞接触，以及获取表示被接触细胞中想要的生物学反应的数据。所述方法也包括使用获得数据的统计模建来确定哪种单一物质的混合物和／或这些混合物中的哪种单一物质对在被接触的细胞中产生想要的生物学反应有效。     

分散体系形成中表面活性剂使用量的判据

通过对甲苯等有机溶剂/水/表面活性剂体系的水基化分散,利用MalvernMicroplus型激光粒度仪对乳化后的分散相粒子大小及其分布进行研究.结果表明,表面活性剂的使用量对分散结果的影响具有局限性,对于具体体系,表面活性剂的临界胶束浓度[CMC(CMC_O+CMC_W)是这种局限性的量化标志,超出CMC的表面活性剂是多余的,对最终的分散结果无作用,同时也会影响分散体系的稳定性.     

铁丝在氧气中燃烧的实验改进

“铁丝在氧气中燃烧”是初中化学教材中证明氧气化学性质的一个演示实验,该实验证明了氧气比较活泼,在一定条件下可以和金属发生剧烈反应。但是与木炭在氧气中燃烧、硫在氧气中燃烧、蜡烛在氧气中燃烧的演示实验相比,铁丝在氧气中燃烧的实验存在着一些不足的地方,针对这些不足,对铁丝在氧气中燃烧的实验进行了改进。1实验存在的问题按照教材要求,铁丝在氧气中燃烧的实验,须将铁丝绕成螺旋状,并在铁丝的末端绑上一根火柴杆,实验时先将火柴杆点燃,待火柴杆将燃尽时,迅速伸入盛满氧气的集气瓶中。这样的操作存在2个问题:第一,火柴燃烧的程度不…     

提高纤维素酶水解效率和降低水解成本

在我国可大量转化乙醇的是纤维质材料.纤维质材料转化乙醇的关键问题是纤维质转化为糖的过程,提高纤维素酶转化效率的方法有:(1)对纤维质材料进行预处理;(2)研究纤维素酶的最适作用条件;(3)纤维素酶的重复利用;(4)合理的发酵工艺等.本文分析了纤维素的结构以及纤维素酶的作用方式,总结了目前研究较多的几种纤维质材料预处理方法,及其对纤维素酶水解率的影响,并对研究纤维素酶的最适作用条件、纤维素酶的重复利用以及合理的发酵工艺进行了综述和分析.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

液晶聚合物/柔性链聚合物共混体系相分离形态

利用元胞动力学方法在二维情况下对浓度、取向序参量的含时Ginzberg-Landau方程进行数值求解,研究了液晶聚合物/柔性链聚合物共混体系的相分离动力学,考察了浓度、取向有序过程的耦合对相分离形态的影响.结果表明,此耦合作用对相分离的时间进程以及相分离图样的空间排布都有影响.液晶聚合物的取向有序相当于增加了两组分间的不相容性而促进两相分离;两个序参量在热力学方面的耦合使液晶聚合物趋向于沿着界面方向取向,而动力学方面的耦合使液晶聚合物分子沿着其取向方向扩散,相分离图样的空间排布由这两种效应共同决定通过极化率张量的定义用数值方法模拟得到了相分离体系的小角光散射图样,结果表明,散射强度分布具有方位角依赖性,它是由浓度、取向序参量的空间变化共同决定的.     

A NOVEL APPROACH TO RHEOLOGICAL CHARACTERIZATION FOR THE GELATION IN POLYMER CRYSTALLIZATION

The isothermal crystallizations of three kinds of commercial isotactic polypropylene have been studied by DSC and rheometric experiments, in a range of temperatures where the rate of crystallization is moderate. As the crystallization proceeds, volume contraction induces tensile force upon the parallel plates. The tensile force relaxed quickly in liquid states,but after a critical amount of the relative crystallinity, it starts to accumulate in the static test, that is, with the motionless parallel plates. A new method to determine the liquid-solid transition by the static tensile force is proposed and compared with two dynamic methods of detecting liquid-solid transition, that is, the power-law modulus theory and the yield modulus model. The tensile force method predicted considerably earlier transition than the dynamic methods, and the corresponding DSC data indicate relative crystallinity of larger than 0.2 at the transition times. The limitation of dynamic methods and other possible errors have been analyzed. While the dynamic methods are suitable for slow crystallization, the tensile force method is more appropriate for the crystallization of moderate rates. Moreover, it has the advantage of almost not disturbing the crystallizing materials before the transition.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Dilatometric study of glass transition kinetics in polyisoprene

From dielectric measurements the thermal dependence and the distribution function of the relaxation times can be determined. In the present contribution we are testing the correspondence between the relaxation times obtained from the dielectric measurement and the dilatometric behavior of the material in the vicinity of the glass transition temperature. The experimental data used for the comparison were obtained for the sample of polyisoprene.     

分子线电子输运特性的第一性原理研究

从第一性原理出发,利用密度泛函理论研究了SH-C8H16-SH分子和金表面的相互作用,并利用分子前线轨道理论和微扰理论定量地确定了该相互作用能常数,然后,利用弹性散射格林函数方法研究了该分子与金表面形成的分子线的伏-安特性.研究结果表明,当含有硫氢官能团的有机分子化学吸附于金表面时,硫原子将与金原子形成以共价键为主的混和键,此时,扩展的分子轨道使分子线的电导呈现出欧姆特性,而对于局域的分子轨道,电子的输运只能通过隧道效应来实现.对分子线伏-安特性的计算结果显示,在零偏压附近,存在一个电流禁区,随着偏压的增加,分子线的电导呈现出平台特征.     

Thermoelectric Properties of Czochralski GeSi Crystal

In order to discuss the application possibility of SiGe crystal in thermoelectric materials,we investigated the thermoelectric properties of several silicon-germanium alloys with different content,orientation and electric conductive type. As discussed in the experiment result,the absolute value of Seebeck coefficient fluctuates from 300 to 600 μV/K in the whole temperature range. In the present paper,the relationship of Seebeck coefficient against content,orientation and electric conductive type is summarized in detail. The Seebeck coefficient of the sample with <111> orientation is smaller than that in <100> at the same temperature. Absolute value of P-type is larger than that of N-type except pure Ge. But as the temperature increases,the absolute value of pure Ge decreases many times as quickly as that of other specimens. In addition,the specimens of bulk GeSi alloy crystals for experiment were grown by the Czochralski method through varying the pulling rate during the growing process.     

DFT Studies on Non-IPR C68 and Endohedral Fullerene Sc3N@C68

The structures and spectra of 20 possible isomers of C78(CH2)3 have been studied by using AM1,INDO/CIS and DFT methods. The results show that the most stable isomer is 1,2,3,4,5,6-C78(CH2)3 (A) with annulene structures,where three -CH2 groups are added to the 6/6 bonds located at the same hexagon passed by the shortest axis of C78 (C2v). Compared with that of C78 (C2v),the first absorption in the electronic spectrum of C78(CH2)3 (A) is blue-shifted because of its wider LUMO-HOMO energy gap. While the IR frequencies of the C–C bonds on the carbon cage are red-shifted owing to the formation of annulene structures and the extension of the conjugated system. The chemical shifts of the carbon atoms in 13C NMR spectra are moved upfield upon the addition.     

MISCIBILITY AND MORPHOLOGY OF THIN FILMS OF BLENDS OF POLYSTYRENE WITH BROMINATED POLYSTYRENES： EFFECTS OF VARYING THE MOLECULAR WEIGHT, BROMINATION DEGREE AND ANNEALING

Thin films of incompatible polymer blends can form a variety of structures during preparation and subsequent annealing process. For the polymer blend system consisting of polystyrene and poIy(styrene-co-p-bromo-styrene), i.e., PS/PBrxS, its compatibility could be adjusted by varying the degree of bromination and the molecular weight of both components comprised, in this paper, surface chemical compositions of the cast and the annealing films were investigated by X-ray photoelectron spectroscopy (XPS) and contact angle measurement; meanwhile, surface topographical changes are followed by atomic force microscopy (AFM). In addition, substantial attention was paid to the effect of annealing on the morphologic variations induced by phase separation and/or dewetting of the thin film. Moreover, the influences of the molecular weight, Aw, as well as the brominated degree, x%, on the sample surface are explored systematically, and the corresponding observations are explained in virtue of the Flory-Huggins theory, along with the dewetting of the polymer thin film.     

Theoretical Study on the Catalytic Activity and Sulfur Resistibility of Amorphous Alloy Ni-B-P

In the present paper,one hundred cluster models NinBP (n=1～6) have been designed and studied by density functional theory (DFT) to get an insight into the local structure,catalytic properties and sulfur resistibility of amorphous alloy Ni-B-P. The configurations in triplet state are found more stable than those in the singlet state. It is found that as the content of Ni in the clusters increases,the value of Fermi level in clusters fluctuated,which shows that the content of Ni can influence the Fermi level to a certain extent. Based on the Fermi level and DOS,we consider the activity of catalyst in hydrogenation reaction is the best in cluster Ni3BP. On the basis of the charge of clusters NinBP (n=1～6),we conclude the amorphous alloy Ni-B-P with high Ni content has better sulfur resistibility and the best hydrogenation activity,strong sulfur resistibility appears in clusters Ni3BP,and the amorphous alloy Ni60B20P20 with similar proportion is expected to prepare in the future.