Brφnsted酸性离子液体催化合成阿司匹林

用Brφnsted酸性离子液体[Hmim]BF4、[bmim]HSO4和[bmim]H2PO4代替浓H2SO4为催化剂催化乙酸酐对水杨酸的乙酰化,合成阿司匹林。考察了反应温度、反应时间、催化剂用量、酐/醇摩尔比对水杨酸酰化反应产率的影响和离子液体的重复使用性能。选择了最佳反应条件,以[bmim]H2PO4作为催化剂,催化剂用量为0.28g(1.18×10-3mol),水杨酸2.762g(0.02mol),乙酸酐4.083g(0.04mol),n(酐)∶n(醇)=2∶1,反应时间30min,反应温度70℃,产率最高达63.43%,并且[bmim]H2PO4溶于水后通过过滤和旋蒸脱水,重复使用3次,产率无明显变化。     

Brønsted酸性离子液体催化合成阿司匹林

用Bronsted酸性离子液体[Hmim]BF4、[bmim]HSO4和[bmim]H2PO4代替浓H2SO4为催化剂催化乙酸酐对水杨酸的乙酰化,合成阿司匹林.考察了反应温度、反应时间、催化剂用量、酐/醇摩尔比对水杨酸酰化反应产率的影响和离子液体的重复使用性能.选择了最佳反应条件,以[bmim]H2PO4作为催化剂,催化剂用量为0.28 g(1.18×10-3mol),水杨酸2.762 g(0.02 mol),乙酸酐4.083 g(0.04 mol),n(酐)n(醇)=21,反应时间30 min,反应温度70℃,产率最高达63.43%,并且[bmim]H2PO4溶于水后通过过滤和旋蒸脱水,重复使用3次,产率无明显变化.     

咪唑类离子液体中合成β-烯胺酮的研究

本文通过修饰阴阳离子合成了一系列咪唑型离子液体,以β-烯胺酮的合成为反应探针,考察离子液体结构和活性之间的关系。结果表明:阴阳离子对离子液体的活性都有显著的影响。阴离子为BF4-时,阳离子活性顺序为[Hmim]+[bmim]+,[emim]+[bmmim]+,其中[Hmim]BF4作反应介质,反应时间为10min,产率可达96%。当阳离子为[Hmim]+时,阴离子BF4-,Tsa-,Br-和NO3-活性均较高,产率达到93%以上,但阴离子HSO4-显著降低离子液体的活性,反应30min,产物收率仅有60%;阳离子为[bmim]+时,[bmim]Br[bmim]PF6[bmim]BF4,产率达到85%以上;而阴离子为HSO4-和H2PO4-时,离子液体活性变差,收率低于70%。离子液体[Hmim]BF4重复使用5次,β-烯胺酮产率基本不变,反应10min后,仍达89%。     

离子液体促进四氟硼酸铜催化芳醛和乙酸酐合成1,1-二乙酸酯

在室温条件下, 离子液体1-正丁基-3-甲基六氟磷酸盐([bmim]PF₆)能促进四氟硼酸铜催化一系列芳醛和乙酸酐反应, 以83%～97%的产率生成相应的1,1-二乙酸酯. 在离子液体[bmim]PF₆存在情况下, 催化剂活性远远高于无离子液体存在下的活性. 催化剂用量仅需 0.2 mol%就能使反应顺利进行, 远远少于文献报道的其它催化剂的用量, 反应在3～20 min内完成. 实验结果表明该法催化剂用量少、产率高、反应时间短、离子液体可重复使用、对环境友好.     

氨基酸离子液体的合成及其催化性能的研究

本文以2-甲基咪唑、溴乙烷、L-谷氨酸为原料合成新型的咪唑谷氨酸盐离子液体,并对其进行红外光谱、核磁共振、质谱表征,同时将其代替浓H2SO4用于催化乙酸酐和水杨酸的乙酰化反应。探究了离子液体的用量、反应温度、反应时间对阿司匹林合成的影响和该氨基酸离子液体的重复使用性能。结果表明：该离子液体对于合成阿司匹林具有良好的催化效果,在水杨酸为2.76ｇ;乙酸酐为4.083ｇ;氨基酸离子液体用量为3滴、反应温度70℃、反应时间30min的条件下,阿司匹林的产率可达78.2％。     

离子液体催化合成对羟基苯甲酸乙酯

采用酸性离子液体[C3SO3 Hmim] HSO4、[C4SO3 Hmim] HSO4和[C3SO3 Hnhm] HSO4代替浓硫酸为催化剂合成对羟基苯甲酸乙醇.考察了反应温度、反应时间、催化剂用量、酸醇摩尔比对该反应产率的影响及离子液体的重复使用性能.选择了最佳反应条件,以[C3SO3 Hnhm] HSO4作为催化剂...     

氨基酸离子液体催化合成阿司匹林的研究

以2-甲基咪唑、溴乙烷、L-谷氨酸为原料合成了新型的咪唑谷氨酸盐离子液体,并对其结构进行了红外光谱、核磁共振、质谱表征。将其用于催化乙酸酐和水杨酸的乙酰化反应,探究了离子液体的用量、反应温度和反应时间对阿司匹林合成的影响和该氨基酸离子液体的重复使用性能。结果表明,该离子液体对于合成阿司匹林具有良好的催化效果,并可以重复使用;在水杨酸、乙酸酐和氨基酸离子液体摩尔比为1∶2∶3.75×10-4、反应温度为70℃以及反应时间为30min的条件下,阿司匹林的产率可达78.2%。     

离子液体耦合有机过氧化物脱除二苯并噻吩的研究

以12-磷钨酸为催化剂,研究了离子液体耦合有机过氧化物脱除二苯并噻吩(DBT)。研究结果表明,单独使用离子[bmim]BF4、[bmim]PF6液体为萃取剂,脱硫率为27.78%~38.76%。以由等体积的H2O2与甲酸制成有机过氧化物为氧化剂,不使用催化剂和离子液体,温度70℃,反应时间6 h,DBT氧化为二苯并噻吩砜的比例为76.6%。在催化剂作用下,将离子液体与氧化剂耦合使用时,脱硫率明显提高。当催化剂与DBT的摩尔比为0.20∶1,氧化剂与DBT的体积比为10∶1,[bmim]PF6离子液体与DBT的体积比为1∶1,在70℃反应6 h后,脱硫率可达98.60%。耦合体系重复使用五次后,氧化脱硫活性没有明显降低。     

离子液体/水混合溶剂促进芳醛与罗丹宁的缩合反应

在室温条件下, 离子液体1-正丁基-3-甲基咪唑四氟硼酸盐([bmim]BF₄)与水组成的混合溶剂能有效催化一系列芳醛与罗丹宁反应, 以80%～93%的产率生成相应的5-芳亚甲基-2,4-噻唑二酮. 离子液体[bmim]BF₄催化活性高, 反应在10～120 min内完成. 实验结果表明该法反应条件温和、产率高、反应时间短、后处理简单、离子液体可重复使用.     

微波促进酸性离子液体催化水杨酸酯化

用自制的硫酸氢1-甲基-3-(3-磺酸基丙基)咪唑([MIMPS]HSO4)酸性离子液体作为水杨酸与醇的酯化反应催化剂,考察了温度、时间、物料配比和离子液体用量等因素对酯化反应的影响,优化的最佳反应条件为: 微波辐射时间20 min,反应温度95 ℃,醇与酸摩尔比3∶1(水杨酸的量为0.02 mol),[MIMPS]HSO4用量10 mmol,水杨酸甲酯的产率和选择性分别为91.9%和99.0%。 离子液体回收循环使用4次,催化效率不变。 与热催化酯化反应相比,微波辐射可缩短反应时间;水杨酸与不同碳链醇的酯化产率随着碳链的增加而降低,同碳链的伯醇酯化率比仲醇高。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.