TiO2纳米管与纳米线的制备及光电化学研究

利用钛箔表面沉积一层TiO2纳米粒子作为晶种,与NaOH反应,通过改变反应温度制备了TiO2纳米管与纳米线.在170℃,48 h的条件下合成了TiO2纳米管.在180℃时得到另一种一维的TiO2纳米线.并用XRD,SEM,SAED,EDS及HRTEM等分析手段对两种产物的成分、形貌、结构进行表征.对TiO2纳米管电极的光电化学性能进行了研究.结果表明,TiO2纳米管与纳米线为锐钛矿型和金红石型的混晶结构.TiO2纳米管单色光的光电转化效率达到10.38%.与钛酸盐纳米管相比,混晶结构TiO2纳米管显示出优良的光电转化性能.     

磁性纳米粒子催化尿素与1,2丙二醇制备碳酸丙烯酯

制备了不同类型的磁性纳米粒子催化尿素与1,2-丙二醇反应合成碳酸丙烯酯,其中的NiFe2O4催化活性最高.反应通过对实验的结果进行分析,可以得到反应的优化条件是:反应温度为170℃,n(PG)∶n(urea)∶n(catalysts)=4∶1∶0.015,反应时间为5h,在此反应条件下,PC的最高收率达到了93.4%.反应为多相催化体系,可方便实现催化剂与产物的分离.     

水热法合成Bi2S3纳米管及其生长机理

以硝酸铋[Bi(NO)3]和硫化钠(Na2S)为反应原料, 采用水热法在120 ℃下反应12 h, 制备出Bi2S3纳米管. 利用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、选区电子衍射(SAED)和高分辨透射电镜(HRTEM)对其结构和形貌进行了表征. 结果表明, 所制备的产物是结晶良好的正交相Bi2S3纳米管, 其外径为100~500 nm, 内径为50~200 nm, 长为1~5 μm. 根据实验结果讨论了Bi2S3纳米管的生长机理. 初步研究了反应温度和矿化剂种类对产物形貌和结构的影响.     

反应条件对乳液法自组装合成氧化锰纳米粒子结构、形貌和尺寸的影响

通过改变反应物物质的量比、分散相与连续相体积比、反应体系温度和煅烧后处理温度,研究了反应条件对乳液法自组装合成氧化锰纳米粒子结构、形貌和尺寸的影响.结果表明:当高锰酸钾与油酸物质的量比在1∶5～1∶1之间时,形成蜂窝状纳米粒子和空心纳米粒子;当分散相(油酸)与连续相(水)的体积比为4∶200时,形成良好的空心球纳米结构;反应体系温度升高不利于产物的洗涤;不同温度的煅烧后处理不仅影响氧化锰纳米粒子的形貌,而且影响其结晶度和晶型.     

一步水热合成铜纳米颗粒负载二氧化钛复合纳米管及其可见光催化活性

采用一步水热法合成了Cu纳米粒子负载二氧化钛纳米管材料. 利用透射电子显微镜(TEM)、X射线衍射仪(XRD)、能谱仪(EDS)等对材料的相组成、形貌以及形成过程进行了研究. 制得的Cu-TiO₂复合纳米材料长度约为100 nm, 直径10-15 nm, 其上负载的Cu纳米粒子尺寸约为5 nm. BET比表面积测试表明实验制备的Cu-TiO₂复合纳米管的比表面积为154.67 m²·g^-1. 通过调节水热反应时间和钛前驱体种类, 研究了该复合纳米管材料的形成机制. 结果表明: 非晶态的钛源对于成功一步合成Cu-TiO₂复合纳米管至关重要. 同时, 实验中观察到铜纳米粒子的尺寸随水热反应时间延长而减小(反奥氏陈化过程), 这一现象有助于纳米粒子的可控合成.紫外-可见吸收光谱表明该复合纳米管在350-800 nm范围内有较强的吸收, 并在550-600 nm范围观察到Cu的表面等离子激元吸收带. Cu-TiO₂界面处形成的肖特基势垒有助于加快光生载流子的输运, 提高光生电子-空穴对的分离效率. 光催化实验表明Cu-TiO₂复合纳米管在可见光下具有较高的催化活性.     

超支化分子桥联受阻酚抗氧化剂的合成与表征

以正十八胺为核的1.0代超支化大分子和β-(3,5-二叔丁基-4-羟基苯基)丙酰氯为原料,通过酰胺化缩合反应,合成了一种具有长链烷基和2个受阻酚基团的新型超支化分子桥联受阻酚类抗氧化剂.通过正交实验确定了超支化分子桥联受阻酚类抗氧化剂的最佳合成体系为:3,5-丙酰氯为酰化剂、K_2CO_3为缚酸剂、苯和水为反应溶剂.通过条件优化实验确定了超支化分子桥联受阻酚类抗氧化剂的最佳合成条件为:3,5-丙酰氯与1.0代超支化大分子的物质的量比为6∶1、反应温度为25 ℃、反应时间为12 h、体系苯与水体积比为6∶1、3,5-丙酰氯与缚酸剂K_2CO_3的物质的量比为1∶1,在此条件下,超支化分子桥联受阻酚类抗氧化剂的收率高达75.5%.FT-IR和1H NMR证实了合成抗氧化剂的化学结构与其理论结构相符.超支化分子桥联受阻酚类抗氧化剂在聚乙烯树脂中的抗氧化性能优于抗氧化剂1076,且随着烷基链长度的增加,抗氧化性能增强.     

磁电CoFe2O4/BaTiO3纳米管的溶胶-凝胶模板法合成和表征

用溶胶-凝胶模板法合成了CoFe2O4/BaTiO3(CFO/BTO)复合纳米管, 管的直径约为100、200和300 nm, 其长度约为100 μm. X射线衍射(XRD)和选区电子衍射(SAED)都显示复合纳米管中同时存在尖晶石相的CoFe2O4 (CFO)和钙钛矿相的BaTiO3(BTO), 进一步的透射电子显微镜(TEM)研究证实合成的纳米复合物具有明显的管状结构. 磁、电研究表明, 该复合纳米管的磁性与纯CFO纳米管的磁性相当; 而铁电性与纯BTO纳米管的铁电性相当.     

磁电CoFe2O4/BaTiO3纳米管的溶胶-凝胶模板法合成和表征

用溶胶-凝胶模板法合成了 CoFe2O4)/BaTiO3(CFO/BTO)复合纳米管,管的直径约为 100、200 和 300 nm,其长度约为100 μm.x射线衍射(xRD)和选区电子衍射(sAED)都显示复合纳米管中同时存在尖晶石相的CoFe2O4(CFO)和钙钛矿相的 BaTiO3(BTO),进一步的透射电子显微镜(TEM)研究证实合成的纳米复合物具有明显的管状结构.磁、电研究表明,该复合纳米管的磁性与纯 CFO 纳米管的磁性相当;而铁电性与纯BTO纳米管的铁电性相当.     

1-(5-二茂铁基-1,3,4-噻二唑-2-基)哌啶-2-酮的合成及表征

本文报道1-(5-二茂铁基-1,3,4-噻二唑-2-基)哌啶-2-酮(1)的合成。首先,在乙酸催化下,二茂铁甲醛(2)和氨基硫脲(3)反应得到二茂铁亚胺基硫脲衍生物(4)。然后,在三氯化铁作用下,中间体4发生关环反应得到5-二茂铁基-1,3,4-噻二唑-2-胺(5)。中间体5再与5-溴戊酰氯(6)发生N-酰基化反应得到5-溴-N-(5-二茂铁基-1,3,4-噻二唑-2-基)戊酰胺(7)。最后,在碱性条件下,中间体7发生分子内关环反应得到目标化合物(1)。中间体及产物结构经¹H NMR、¹³C NMR和ESI-MS表征,产物1结构进一步通过X-单晶衍射确证。然后分别考察了中间体5及产物1收率的主要影响因素,确定中间体5合成的适宜条件为：三氯化铁的用量为n(三氯化铁)∶n(中间体4)=4∶1,反应温度80℃,反应时间为15 h,在该条件下,中间体5的收率达到61.9%;确定产物1合成的适宜条件为：反应溶剂为二氧六环,物料比为n(DIEA)∶n(6)∶(5)=3.0∶1.2∶1.0、反应温度为80℃,反应时间为4 h,在该条件下,产物1收率达到68...     

β-环糊精/聚(DL-丙交酯)接枝共聚物的合成与表征

以β-环糊精(β-CD)为接枝骨架、DL-丙交酯(DLLA)为接枝单体,三乙胺为催化剂,合成了β-环糊精/聚(DL-丙交酯)接枝共聚物(PCDLA).利用IR、1H-NMR、DSC、WXRD和GPC等方法对接枝共聚物的结构进行了表征,测定了共聚物的分子量,并研究了反应投料比对单体转化率(C%)、接枝率(G%)和接枝效率(GE%)的影响.结果表明,在三乙胺催化下,DL-丙交酯与β-环糊精能够发生聚合反应得到接枝共聚物,当DL-丙交酯与β-环糊精结构单元的摩尔比为30∶1,反应时间为10h时,接枝反应的接枝率(G%)和接枝效率(GE%)可分别达到182·9%和21·4%.随着接枝共聚物中β-环糊精含量的增加,共聚物的亲水性得到了改善.     

Shape evolution and size-controllable synthesis of Cu2O octahedra and their morphology-dependent photocatalytic properties

Octahedral Cu(2)O crystals with tunable edge length were synthesized by reducing copper hydroxide with hydrazine without using any surfactant. Systematic experiments were carried out to investigate the factors which impact on the morphology and size of the products. The molar ratios of the reagents (NH(3):Cu(2+) and OH(-):Cu(2+)) determined the morphology and size of the corresponding products via affecting the coordination between NH(3) and Cu(2+). It is demonstrated that the ratio of growth rate along 111 versus 100 was varied by adjusting the molar ratio of NH(3) to Cu(2+), thus Cu(2)O crystals with different morphologies such as spheres, cubelike, and octahedra were obtained. The edge lengths of octahedra can be easily tuned from 130 to 600 nm by adjusting the molar ratio of OH(-) to Cu(2+). It is an effective and facile method for the controlled synthesis of octahedral Cu(2)O. The obtained octahedral Cu(2)O particles show improved ability on adsorption and photodegradation of methyl orange compared with cubic Cu(2)O particles.     

Fabrication of CuO pricky microspheres with tunable size by a simple solution route

A simple aqueous solution route was introduced for the fabrication of CuO pricky microspheres (CPMs) using CuCl(2) x 2H(2)O, Na(2)(C(4)H(4)O(6)) x 3H(2)O and NaOH as starting materials. The CPMs were composed of compressed nanothorns exhibiting tapering feature with tip size of less than 10 nm, and the size of CPMs could be tuned from 100-200 nm to 4-6 microm. The effects of the molar ratios of tartrate anions and NaOH to Cu(2+) cations, reagent concentration, and reaction temperature on the products were investigated, showing that the morphology of CPMs was determined by the molar ratio of tartrate to Cu(2+) cations and the size was greatly affected by reagent concentration and the molar ratio of NaOH to Cu(2+) cations in the precursor solution. The fabrication of CPMs went through rapid nucleation of Cu(OH)(2), aggregation and in situ dehydration of Cu(OH)(2), oriented-aggregation-based growth, and normal crystal growth of CuO nanothorns. The nucleation and crystal growth were successfully separated by controlled releasing of Cu(2+) and OH(-) ions through the reversible reaction of Cu(2+) cations, OH(-), and C(4)H(4)O(6)(2-) anions.     

纳米固体酸催化合成无毒增塑剂柠檬酸三辛酯的研究

以柠檬酸和正辛醇为原料,采用自制的纳米固体酸S04^2-／SnO2、SO4^2-／ZrO2、SO4^2-／TiO2及SO4^2-／Fe2O3催化剂合成无毒增塑剂柠檬酸三辛酯（trioctylcitrate,TOC）。分别考察了纳米催化剂种类、催化剂用量、醇／酸物质的量比、反应时间、反应温度等因素对合成TOC反应酯化率的影响,对合成的产品进行红外光谱分析。实验结果表明,自制的固体酸SO4^2-／SnO2催化合成无毒增塑剂柠檬酸三辛酯的最佳反应条件：催化剂用量为1．0g,酸醇比为1：6.3,反应时间1．0h,反应温度190℃。在最佳反应条件下,柠檬酸三辛酯的酯化率可达到98．5％。     

Characteristics of copper sulfide nanoparticles obtained in the copper sulfate–sodium thiosulfate system

Stable hydrosols of copper sulfide nanoparticles are synthesized by heating aqueous solutions with different ratios of sodium thiosulfate and copper sulfate in the presence of polyvinylpyrrolidone and studied by a number of physicochemical methods in situ (optical spectroscopy, dynamic light scattering) and ex situ (transmission electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy). The main product is CuS covellite nanoparticles with some impurities of other phases (Cu₂S, Cu_1,8S, Cu₇S₄). With an increase in the initial molar ratio S₂O ^2?₃ / Cu from 0.2 to 5 the nanoparticle size increases from 1-5 nm to 30-50 nm and then decreases to 4 nm at a ratio of 10. A substantial increase in the intensity of plasmon absorption within 800-1500 nm is observed during the formation of planar nanoparticles with a lateral size of about 30 nm at S₂O ^2?₃:Cu = 5. A band gap obtained from both direct and indirect optical absorption spectra of sulfides (2.6 eV and 1.7 eV respectively) remains constant for all particles.     

Controllable Synthesis of Covellite Nanoparticles via Thermal Decomposition Method

In this study, covellite (CuS) nanoparticles were synthesized through a facile and low temperature thermal decomposition method using [Cu(sal)₂]- oleylamine complex, (sal = salicylaldehydeato, prepared in situ from [Cu(sal)₂] and oleylamine as the precursors), and sulfur as the Cu²⁺ source and S source, respectively. Scanning electron microscope, transmission electron microscope, electron diffraction and ultraviolet–visible absorption (UV–Vis) spectra were used for the characterization of the products. The effect of reaction parameters, such as the copper:sulfur molar ratio, the reaction temperature and the reaction time on the shape, size and phase of CuS nanostructures, was investigated. The results showed that the, covellite (hexagonal structure of CuS) with an average size between 20 and 45 nm could be obtained with the Cu:S molar ratio of 1: 3 at 105 °C for 60 min. With increasing the reaction temperature from 105 to 200 °C, non-stoichiometric Cu_1.65S with the average size of 25–50 nm was obtained due to the different existing state of the released Cu²⁺ ions from the copper-oleylamine complex.     

微波辐射无溶剂羰基化合物的硫代反应

以7个羰基化合物和五硫化二磷为原料,通过辐射下的微波、无溶剂的硫代反应,合成了7种硫羰基化合物,收率76%~93%。 最佳反应条件为：羰基化合物与P2S5的摩尔比为4∶1,反应温度100 ℃,反应时间15~20 min。 合成化合物的结构经1H NMR和13C NMR表征。     

自组装的氢氟酸掺杂的聚苯胺微/纳米管

以氢氟酸为掺杂剂,采用无模板法制得了高电导率(10-2-10-1S/cm)聚苯胺微/纳米管(d=85-420nm).当[HF]/[An]=0.5时所得微/纳米管的形成机率高达100%.发现微/纳米管的直径和电导率均随[HF]/[An]比例的增加而增加.FTIR,UV-Vis,XRD结构表征证明所得的聚苯胺微/纳米管为掺杂态.     

Syntheses, crystal structures, and physical properties of La5Cu6O4S7 and La5Cu6.33O4S7

Single crystal and bulk powder samples of the quaternary lanthanum copper oxysulfides La5Cu6.33O4S7 and La5Cu6O4S7 have been prepared by means of high-temperature sealed-tube reactions and spark plasma sintering, respectively. In the structure of La 5Cu6.33O4S7, Cu atoms tie together the fluorite-like (2)infinity[La5O4S(5+)] and antifluorite-like (2) infinity[Cu6S6(5-)] layers of La5Cu6O4S7. The optical band gap, E g, of 2.0 eV was deduced from both diffuse reflectance spectra on a bulk sample of La5Cu6O4S7 and for the (010) crystal face of a La 5Cu6.33O4S7 single crystal. Transport measurements at 298 K on a bulk sample of La 5Cu 6O 4S 7 indicated p-type metallic electrical conduction with sigma electrical =2.18 S cm(-1), whereas measurements on a La 5Cu6.33O4S7 single crystal led to sigma electrical =4.5 10(-3) S cm(-1) along [100] and to semiconducting behavior. In going from La 5Cu6O4S7 to La5Cu6.33O4S7, the disruption of the (2)infinity[Cu6S6(5-)] layer and the decrease in the overall Cu(2+)(3d(9)) concentration lead to a significant decrease in the electrical conductivity.     

导电聚苯胺/TiO_2微/纳米球的制备及其结构表征

采用具有八面体形貌的氧化亚铜为模板,制备了聚苯胺/TiO2(PANI/TiO2)微/纳米球,TiO2纳米粒子很均匀地分散在聚苯胺中.研究了不同TiO2/苯胺(TiO2/ANI)摩尔比对PANI/TiO2复合物的结构、形貌和电学性能的影响.实验结果表明,随着TiO2/ANI摩尔比的增加,PANI/TiO2复合物的直径逐渐减小,当TiO2/ANI摩尔比为0.16时,复合物的平均直径为373nm,而当TiO2/ANI摩尔比增加到1.6时,复合物的平均直径降到80nm.PANI/TiO2复合微/纳米球的电导率随着TiO2/ANI摩尔比的增加先升高后降低,当TiO2/ANI摩尔比达到1.6时,电导率由10-4S/cm提高到100S/cm,达到最大值.产物的形貌和结构分别采用扫描电镜、透射电镜、红外吸收光谱和X-射线衍射等手段进行了表征.     

Large-scale synthesis of high-quality metal sulfide semiconductor quantum dots with tunable surface-plasmon resonance frequencies

High-quality CdS and Cu(7)S(4) quantum dots (QDs) were synthesized with N,N-dibutylthiourea (DBTU) as an organic sulfur source. In this method, nucleation and growth reactions were controlled simply by the heating rate of the reaction. The mild oxidation conditions gave monodisperse CdS QDs exhibiting pure band-edge emission with relatively high photoluminescence quantum yield. During the synthesis of Cu(7)S(4) QDs, the addition of dodecanethiol to the reaction system controlled the reaction rate to give monodisperse spherical or disk-shaped QDs. A hundred-gram scale of copper precursor could be used to generate the high-quality Cu(7)S(4) QDs, indicating that an industrial-scale reaction is achievable with our method. As observed in anisotropic noble-metal nanocrystals, larger disk-shaped Cu(7)S(4) QDs showed lower localized-surface-plasmon resonance energy in the near-infrared region. The disk-shaped Cu(7)S(4) QDs could be used effectively as templates to form cation-exchanged monodisperse disk-shaped CdS QDs.