含聚氧乙烯链段的两亲性接枝共聚物的合成及应用

介绍了含聚氧乙烯链段的两亲性接枝共聚物的制备方法与应用近况。     

Synthesis and characterization of amphiphilic PMTFPS‐b‐PEO diblock copolymers

A series of new amphiphilic poly[methyl(3,3,3‐trifluoropropyl) siloxane]‐b‐poly(ethyleneoxide) (PMTFPS‐b‐PEO) diblock copolymers with different ratio of hydrophobic segment to hydrophilic segment were prepared by coupling reactions of end‐functional PMTFPS and PEO homopolymers. PMTFPS‐b‐PEO diblock copolymers synthesized were shown to be well defined and narrow molecular weight distributed by characterizations such as NMR, GPC, and FTIR. Additionally, the solution properties of these diblock copolymers were investigated using tensiometry and transmission electron microscopy. Interestingly, the critical micellization concentration increases with increasing length of hydrophobic chain. Transmission electron microscopy studies showed that PMTFPS‐b‐PEO diblock copolymers in water preferentially aggregated into vesicles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis, characterization and micelle formation of amphiphilic graft copolymers

The macromonomer method is a useful tool for the preparation of various graft copolymers with well-defined structure and composition. Macromonomers were prepared by anionic polymerization of styrene followed by a direct coupling reaction of polystyryllithium with an excess of vinylbenzyl chloride. The control of the terminal functional groups is particularly important to ensure the reactivity of macromonomers in the radical copolymerization; the degree of functionality was determined by both n.m.r. and u.v.-vis. spectroscopy to be from 85–99%. Graft copolymers were synthesized by radical copolymerization of (vinylbenzyl) polystyrene macromonomer with 2-hydroxyethyl methacrylate (HEMA), or with acrylic acid. The organization ability of the copolymers to form micelles was investigated by ¹H n.m.r. spectroscopy, and verified by their ability to stabilize emulsions. These copolymers were found to be effective surfactants for emulsion polymerization of polystyrene latexes. © 1997 Elsevier Science Ltd.     

Synthesis and characterization of PBMA‐b‐PDMS‐b‐PBMA copolymers by atom transfer radical polymerization

Poly(butyl methylacrylate)–b–poly(dimethylsiloxane)–b–poly(butyl methylacrylate) (PBMA–b–PDMS–b–PBMA) triblock copolymers were synthesized by atom transfer radical polymerization (ATRP). The reaction of α,ω‐dichloride PDMS with 2′‐hydroxyethyl‐2‐bromo‐2‐methylpropanoate gave suitable macroinitiators for the ATRP of BMA. The latter procedure was carried out at 110°C in a phenyl ether solution with CuCl and 4,4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as the catalyzing system. The polymerization was controllable, with the increase of the monomer conversion, there was a nearly linear increase of molecular weight and a decrease of polydispersity in the process of the polymerization, and the rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with IR and ¹H‐NMR and differential scanning calorimetry. The effects of macroinitiator concentration, catalyst concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP were reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 532–538, 2004     

Synthesis and characterization of Pst‐b‐PDMS‐b‐PSt copolymers by atom transfer radical polymerization

Polystyrene‐b‐poly(dimethylsiloxane)‐b‐polystyrene (Pst‐b‐PDMS‐b‐PSt) triblock copolymers were synthesized by atom transfer radical polymerization (ATRP). Commercially available difunctional PDMS containing vinylsilyl terminal species was reacted with hydrogen bromide, resulting in the PDMS macroinitiators for the ATRP of styrene (St). The latter procedure was carried out at 130°C in a phenyl ether solution with CuCl and 4, 4′‐di (5‐nonyl)‐2,2′‐bipyridine (dNbpy) as the catalyzing system. By using this technique, triblock copolymers consisting of a PDMS center block and polystyrene terminal blocks were synthesized. The polymerization was controllable; ATRP of St from those macroinitiators showed linear increases in M_n with conversion. The block copolymers were characterized with IR and ¹H‐NMR. The effects of molecular weight of macroinitiators, macroinitiator concentration, catalyst concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are reported. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3764–3770, 2004     

Synthesis and characterization of poly(ether sulfone)‐graft‐polydimethylsiloxane copolymers

Novel poly(arylene ether sulfone) (PAES) polymers containing polydimethylsiloxane (PDMS) side chains were synthesized and characterized with NMR and Fourier transform infrared spectroscopy. The thermal properties of the copolymers were evaluated with differential scanning calorimetry and thermogravimetric analysis. The polymers showed perfect thermal stability, as the decomposition temperatures were all above 380°C, and exhibited glass‐transition temperatures in the range 130–188°C. Furthermore, the surface properties of the copolymers were evaluated by X‐ray photoelectron spectroscopy and contact angle analysis. The results show that the hydrophobic abilities of the graft copolymer surfaces were improved significantly compared to PAES through the introduction of the PDMS chains. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Poly(dimethylsiloxane‐b‐styrene) diblock copolymers prepared by reversible addition–fragmentation chain‐transfer polymerization: Synthesis and characterization

Well‐defined poly(dimethylsiloxane‐b‐styrene) diblock copolymers were prepared by reversible addition–fragmentation chain‐transfer (RAFT) polymerization. Monohydroxyl‐terminated polydimethylsiloxane was modified to form a functional polydimethylsiloxane/macro‐RAFT agent, which was reacted with styrene to form the diblock copolymers. The chemical compositions and structures of the copolymers were characterized by proton nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and gel permeation chromatography. The surface properties and morphology of the copolymers were investigated with static water contact‐angle measurements, X‐ray photoelectron spectroscopy, transmission electron microscopy, and atomic force microscopy, which showed a low surface energy and microphase separation surfaces that were composed of hydrophobic domains from polydimethylsiloxane segments. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polyoxyethylenic macromers from polyoxyethylene monomethyl ethers and isocyanatoethyl methacrylate. Synthesis and characterization of copolymers with styrene and methyl methacrylate, obtained through bulk, solution and soap-free emulsion polymerizations

Polyoxyethylenic (POE) macromers were prepared from polyoxyethylene methyl ethers and isocyanatoethyl methacrylate and characterized by ¹³C and ¹H nuclear magnetic resonance spectroscopy. Copolymers with styrene and methyl methacrylate (MMA) were obtained from these macromers upon free-radical initiation under various conditions (solution, bulk, soap-free emulsion) and some physical properties were studied (e.g. glass transition temperatures, stability of latex). Phase separation was observed in some copolymers with MMA as determined through dilatometry. Polystyrene latices, prepared without any emulsifying agent other than POE macromers themselves, were stable in the presence of high electrolyte concentrations.     

Synthesis and characterization of novel graft copolymers by radiation‐induced grafting

The radiation‐induced graft copolymerization of N‐vinyl‐2‐pyrrolidone (NVP), 4‐vinyl pyridine (4VP), and 2‐vinyl pyridine (2VP) monomers onto poly (ethylene‐alt‐tetrafluoroethylene) (ETFE) was investigated. The influence of synthesis conditions particularly the solvent was studied. Various solvents, such as n‐propanol, isoproponol, benzyl alcohol, methanol, ethanol, cyclohexanone, tetrahydrofuran (THF), nitromethane, 1,4‐dioxane, and n‐heptane were examined for this purpose. Graft copolymers were characterized by Fourier transform infrared (FTIR) spectroscopy, dynamic mechanical analysis (DMA), and scanning electron microscopy‐energy dispersive spectroscopy (SEM‐EDAX). It was found that the nature of the solvent had profound influence over the grafting reaction. Cyclohexanone, n‐propanol, and isoproponol for 4VP/ETFE grafting, THF and 1,4‐dioxane for NVP/ETFE grafting, and benzyl alcohol and methanol for 2VP/ETFE grafting were found to be the suitable solvents yielding highest graft levels. Isoproponol and n‐propanol are promising in terms of both graft level and mechanical properties for 4VP/ETFE. Grafting of NVP, 4VP, and 2VP onto ETFE were verified through FTIR spectroscopy. Storage modulus and glass transition temperature of the copolymers were found to increase as graft level increased. Surface profile of representative films was also investigated by viewing the distribution of elemental nitrogen using SEM‐EDAX. Results indicated that copolymers of 4VP, NVP, and 2VP are considerably different from each other. 4VP‐based copolymers exhibited relatively more homogenous grafting over the surface compared with NVP‐ and 2VP‐based copolymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Instability of graft copolymers under polymer blending conditions

One of the challenges polymer blends may face is their morphological instability. Among the many polymer blends that have been studied in academia and industries, polyamide 6 (PA6) based polymer blends have probably received the most attention. This work shows for the first time that graft copolymers with PA6 as grafts are highly instable under melt polymer blending conditions. Therefore, the structural instability of such graft copolymers can be another crucial factor that dictates the morphology and properties of PA6 based polymer blends as well as their stability, especially those of nano-structured ones.     

Efficiency of graft copolymers at stabilizing co-continuous polymer blends during quiescent annealing

This work was aimed at studying the efficiency of graft copolymers at stabilizing the co-continuous morphology of polystyrene (PS)/polyamide 6 (PA6) blends during quiescent annealing. A series of graft copolymers with PS as backbone and PA6 as grafts, denoted as PS-g-PA6, with different molecular structures and compositions were used as compatibilizers. The co-continuous domain size of the blends without PS-g-PA6 increased almost linearly with annealing time. The addition of the PS-g-PA6 not only narrowed down the composition range of co-continuity of PS/PA6 blend but also slowed down and even stopped completely the coarsening of the co-continuous morphology during the quiescent annealing. Moreover, the efficiency of PS-g-PA6 depended very much on its molecular structure and/or composition. For graft copolymers with similar backbone and graft chain number, the longer the grafts, the higher their stabilizing efficiency. For a given backbone/graft composition, graft copolymers having fewer and longer grafts were more efficient at compatibilizing and stabilizing the co-continuous morphology.     

Synthesis and characterization of anionic graft copolymers containing poly(ethylene oxide) grafts

Graft copolymers containing poly(ethylene oxide) side chain attached to maleic anhydride‐alt‐vinyl methyl ether (MA‐VME) copolymer were prepared by coupling MA‐VME and poly(ethylene glycol) monomethyl ether (MPEG) by esterification in DMF at 90°C. MPEG and dodecyl alcohol (DA) were grafted onto MA‐VME copolymer in o‐xylene at 140°C in the presence of p‐toluene sulfonic acid as catalyst. The molecular weights of MPEG were found to influence the rate of the grafting reaction and the final degree of conversion. The graft copolymers were characterized by IR, GPC, and ¹H‐NMR. DSC was used to examine thermal properties of the graft copolymers. The analysis indicates that grafts have phase‐separated morphology with the backbone and the MPEG grafts forming separate phases. The properties in aqueous solutions of these grafts were studied with respect to aggregation behavior and viscometric properties. In aqueous solution, the polymers exhibited polyelectrolyte behavior (i.e., a dramatic increase of the viscosity upon neutralization). Graft copolymers with DA have lower viscosities. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1138–1148, 2002     

Synthesis and characterization of fluorinated polyacrylate graft copolymers capable as water and oil repellent finishing agents

A facile method for preparation of fluorinated polyacrylate was developed. Novel multifunctional graft copolymer ( GPF‐1, 2, 3 ) containing short fluoroalkyl side chains and reactive groups were successfully prepared by grafting fluoroalcohols to polyacrylate. The obtained products were characterized by ¹H NMR, ¹⁹F NMR, FTIR, GPC, TGA, and XPS analyses. GPF‐1, 2, 3 exhibited very low surface free energy (17.77–25.81 mJ/m²). Cotton fabric treated by GPF‐1 had the highest water and oil repellency rating which was 100 and 6, respectively (AATCC test methods). The water and oil repellency rating was kept as 90 and 5, respectively, after 10 soaping cycles or 2 h uninterrupted soaping which indicated a very good washing durability. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization and properties of functionalized styrene–maleimide copolymers

New functionalized styrene–maleimide copolymers were prepared by free radical copolymerization of styrene (St) and N‐4‐carboxybutylmaleimide (NBMI) in chloroform, using 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monomer and copolymer characterization was carried out by ¹H‐ and ¹³C‐NMR. Copolymer composition was determined by elemental analysis and Fourier‐transform infrared (FTIR) spectroscopy. The glass transition temperature (from DSC) and the thermogravimetric analysis (TGA) of the copolymers were consistent with the thermal behavior and stability observed for alternating St–maleimide copolymers. St–NBMI copolymers crosslinked with divinylbenzene (DVB) were also synthesized and their cation exchange properties evaluated in order to assess the capacity of the new copolymers to bind metallic ions. Copyright © 2005 Society of Chemical Industry     

Synthesis and characterization of graft copolymers of syndiotactic polystyrene with polybutadiene and 4‐methylstyrene

The basic method for synthesizing syndiotactic polystyrene‐g‐polybutadiene graft copolymers was investigated. First, the syndiotactic polystyrene copolymer, poly(styrene‐co‐4‐methylstyrene), was prepared by the copolymerization of styrene and 4‐methylstyrene monomer with a trichloro(pentamethyl cyclopentadienyl) titanium(IV)/modified methylaluminoxane system as a metallocene catalyst at 50°C. Then, the polymerization proceeded in an argon atmosphere at the ambient pressure, and after purification by extraction, the copolymer structure was confirmed with ¹H‐NMR. Lastly, the copolymer was grafted with polybutadiene (a ready‐made commercialized unsaturated elastomer) by anionic grafting reactions with a metallation reagent. In this step, poly(styrene‐co‐4‐methylstyrene) was deprotonated at the methyl group of 4‐methylstyrene by butyl lithium and further reacted with polybutadiene to graft polybutadiene onto the deprotonated methyl of the poly(styrene‐co‐4‐methylstyrene) backbone. After purification of the graft copolymer by Soxhlet extraction, the grafting reaction copolymer structure was confirmed with ¹H‐NMR. These graft copolymers showed high melting temperatures (240–250°C) and were different from normal anionic styrene–butadiene copolymers because of the presence of crystalline syndiotactic polystyrene segments. Usually, highly syndiotactic polystyrene has a glass‐transition temperature of 100°C and behaves like a glassy polymer (possessing brittle mechanical properties) at room temperature. Thus, the graft copolymer can be used as a compatibilizer in syndiotactic polystyrene blends to modify the mechanical properties to compensate for the glassy properties of pure syndiotactic polystyrene at room temperature. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of amphiphilic triblock copolymers for the formation of magnesium fluoride (MgF2) nanoparticles

A series of amphiphilic poly(2‐hydroxyethyl methacrylate)‐b‐polydimethylsiloxane‐b‐poly(2‐hydroxyethyl methacrylate) (pHEMA‐b‐PDMS‐b‐pHEMA) (A‐B‐A) triblock copolymers were synthesized from three different carbinol‐terminated polydimethylsiloxanes with varying molecular weight. A carbinol‐terminated polydimethylsiloxane was modified with 2‐bromoisobutyryl bromide to obtain a macroinitiator. The block copolymers were characterized by NMR, GPC, and dynamic light scattering (DLS). Reverse micelles of a copolymer were formed in mixture of benzene/methanol solution which served as nanoreactors for the synthesis of magnesium fluoride (MgF₂) nanoparticles. The MgF₂ was prepared via chemical precipitation using magnesium chloride and potassium fluoride as reactants. The MgF₂‐triblock copolymer composites were synthesized as a function of MgF₂–weight ratio (0.5, 5, and 10 wt%) in copolymer. The MgF₂ colloids were dissolved in three organic solvents: methanol, isopropanol, and tetrahydrofuran. The polymer nanoparticles were characterized by DLS, transmission electron microscopy, thermogravimetric analysis, and X‐ray diffraction (XRD) analysis. The formation of MgF₂ crystals was observed by XRD. Particle size and particle size distribution showed significant changes in different solvents. The thermal stability of MgF₂ colloids increased as the amount of nanoparticle increased in polymeric matrix. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of functionalized syndiotactic polystyrene copolymers

Functionalized syndiotactic polystyrene copolymers were synthesized and characterized. The syndiotactic polystyrene copolymers, poly(styrene‐co‐4‐methylstyrene) (sPSMS), were prepared by styrene with 4‐methylstyrene with a metallocene/methylaluminoxane catalyst. In addition, grafted copolymers, chemically grafted with isoprene onto an sPSMS backbone [poly(styrene‐co‐4‐methylstyrene)‐g‐polyisoprene (sPSMS‐g‐PIP)] were synthesized by anionic grafting polymerization with a metallation reagent. In this study, we also examined the effect of the degree of functionalization (epoxidation) on the polymer structure of the sPSMS‐g‐PIP copolymers. Experimental results indicate that the crystallinity of the sPSMS‐g‐PIP copolymer was lower than that of the ungrafted sPSMS copolymer. Moreover, the epoxy‐containing sPSMS‐g‐PIP copolymer effectively increased the thermal stability more than did the sPSMS‐g‐PIP copolymer alone. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1038–1045, 2002     

Synthesis and characterization of ZnO nanostructures templated using diblock copolymers

The development of self‐assembled ZnO nanoparticles within a diblock copolymer matrix using wet chemical processing specific to ZnO is reported. Diblock copolymers consisting of polynorbornene and poly(norbornene–dicarboxcylic acid) (NOR/NORCOOH) were synthesized with a block repeat unit ratio of 400 for the first block and 50 for the second block, to obtain spherical microphase separation. The block copolymer self‐assembly was used to template the growth of ZnO nanoparticles by introducing a ZnCl₂ precursor into the second polymer (NORCOOH) block at room temperature and processing the copolymer by wet chemical methods to substitute the chlorine atoms with oxygen. X‐ray photoemission spectroscopy (XPS) verified the conversion of ZnCl₂ to ZnO by monitoring the disappearance of the Cl 1s peak and the shift in the binding energy of the Zn 2p³ peak in the high‐resolution spectra. The substitution of Cl by O was found to be a highly preferential process, whereby only one approach using a weak base (NH₄OH) succeeded in effectively replacing Cl with O to result in spherical ZnO nanoparticles having a size ranging from 7 to 15 nm, as determined by transmission electron microscopy. The development of such block copolymer‐templated ZnO nanoparticles% is important in enabling the functionalization of large‐area nanodevice technologies. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1058–1061, 2003     

Block copolymers of acrylonitrile and poly(dimethylsiloxane)s

The chemical redox system of ceric ammonium nitrate(Ce⁴⁺) and poly(dimethylsiloxane)s (PDMS) with monohydroxy (MH), dihydroxy (DH), and diamine(DA) chain ends was used to polymerize acrylonitrile (AN) to produce monohydroxy poly(dimethylsiloxane)s‐b‐polyacrylonitrile (MH.PDMS‐b‐PAN), dihydroxy poly(dimethylsiloxane)s‐b‐polyacrylonitrile (DH.PDMS‐b‐PAN), and α, ω‐diamine poly(dimethylsiloxane)s‐b‐polyacrylonitrile (DA.PDMS‐b‐PAN) block copolymers. The concentration, reaction time, and the type of poly(dimethylsiloxane) affect the yield and the molecular weight of the copolymers. The ratio of AN/ceric salt/PDMS has remarkably affects the properties of formed copolymers. DH.PDMS‐b‐PAN copolymers were also prepared by electroinduced polymerization in the presence of catalytic amount of Ce⁴⁺ in a divided electrochemical cell where Ce³⁺ is readily oxidized into Ce⁴⁺ at the anode. The products were characterized by Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, DSC, and their surface properties were investigated through contact‐angle measurements. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013