Irradiation of Crosslinked, Poly(Vinyl Alcohol) Blended Hydrogel for Wound Dressing

In order to obtain a more ideal hydrogel wound dressing, crosslinked hydrogel films blended with polyvinyl alcohol (PVA), polyvinyl pyrrolidone, kappa-carrageenan (KC), and powder silk were prepared by electron beam, and their physiochemical properties were investigated as a combination of function factors. The experimental results showed that the gel fraction of the hydrogel films depended mainly on irradiation dose and the monomer concentration of the polymers, the properties of hydrogel could be greatly extended or improved by blending homopolymers. The rate of gel formation of the hydrogel was raised, and the water evaporation from hydrogel could be retarded after mixing with KC, while the tensile strength of hydrogel films were obviously increased after mixing with silk. Toxicity and healing effect of PVA/PVP/KC/silk blended hydrogel films as wound dressings were evaluated. The irradiated blended hydrogel showed satisfactory properties for wound dressing, the hydrogel did not induceany acute general toxic effects, and it is effective for fast healing of wound.     

PVA-clay nanocomposite hydrogels for wound dressing

Polymer gels as soft biomaterials have found diverse applications in biomedical field, e.g. in management and care of wound as wound dressing.The recent researches on nanocomposite materials have shown that some properties of polymers and gels significantly improve by adding organoclay into polymeric matrix. In this work, in order to obtain wound dressing with better properties, nanocomposite hydrogel wound dressing was prepared using combination of polyvinyl alcohol hydogel and organoclay, i.e. Na-montmorillonite, via the freezing-thawing method. The effect of organoclay quantity on the structural, swelling, physical and mechanical properties of nanocomposite hydrogel wound dressing was investigated. The results showed that the nanocomposite hydrogels could meet the essential requirements for the reasonable wound dressing with some desirable characteristics such as relatively good swelling, appreciated vapour transmission rate, excellent barrierity against microbe penetration and mechanical properties. The results also indicated that the quantity of the clay added to the nanocomposite hydrogel is the key factor in obtaining such suitable properties required for wound dressing.     

Slow release of wound healing drug from hydrogel wound dressing prepared by radiation crosslinking method

The hydrogel wound dressing was prepared by radiation crosslinking. It was used of on patients in the Navy 411 Hospital and some other hospitals. From sixty case studies of the clinical effects, the results showed that: 1. drug releasing slowly releives the pain effectively for prolonged period of application; 2. The dressing can reduce the oozing liquid from the wound and make the wound heal faster; 3. The number of the dressing change is greatly reduced. All the data indicates that the dressing is superior to the conventional kinds.     

聚乙烯醇/聚乙烯吡咯烷酮/碘复合水凝胶的制备与性能

采用低温冷冻的方法, 通过改变聚乙烯醇(PVA)和聚乙烯吡咯烷酮碘络合物(PVP-I)的配比、 冷冻时间、 冷冻-解冻循环次数, 制备出一种可调控力学性能的PVA/PVP-I复合水凝胶. 研究了该复合水凝胶的机械 性能、 微观结构、 碘缓释性能和抑菌性质. 研究结果表明, PVA/PVP-I复合水凝胶可调控的力学性质可以满足伤口敷料对水凝胶力学性质的需求; 复合水凝胶的网络结构可以有效降低碘在紫外线下的分解速度, 实现对碘的稳定保护作用及控制释放, 从而发挥水凝胶持续抑菌性能, 为抑菌水凝胶的设计制备提供了新思路.     

Gamma Radiation‐Induced Crosslinked PVA/Chitosan Blends for Wound Dressing

Crosslinked polyvinyl alcohol (PVA) and chitosan polymer blends have been prepared by using gamma irradiation. Chitosan was used in the blends to prevent microbiological growth, such as bacteria and fungi on the polymer. The physical properties of the blend, such as gelation, water absorption, and mechanical properties were examined to evaluate the possibility of its application for wound dressing. A mixture of PVA/chitosan, with different ratios, were exposed to gamma irradiation doses of 20, 30, 50 KGy, to evaluate the effect of irradiation dose on the physical properties of the blend. It was found that the gel fraction increases with increasing irradiation dose and PVA concentration in the blend. Swelling percent increased as the composition of chitosan increased in the blend. The PVA/chitosan blend has a water content in the range between 40% and 60% and water absorption between 60% and 100%. The water vapor transmission rate value (WVRT) of the PVA/chitosan blend varies between 50% and 70%. The examination of the microbe penetration shows that the prepared blend can be considered as a good barrier against microbes. Thus, the PVA/chitosan blend showed satisfactory properties for use as a wound dressing.     

Preparation and characterization of PVA/SA/HA composite hydrogels for wound dressing

A composite hydrogel based on, by introducing, polyvinyl alcohol, sodium alginate, and hyaluronic acid was fabricated using CaCl₂ as a cross-linker. The physical properties including morphology, water vapor transmission rate, and hydrophilicity were investigated. All PVA/SA/HA composite hydrogels with different compositions had highly homogeneous and interconnected pores, and the morphologies of the PVA/SA/HA hydrogels ranged from fibrous structure to irregular structure with increasing content of SA. The introduction of sodium alginate enhanced the hydrophilicity and water vapor transmission capacity of the hydrogel; however, the hydrophilicity of the composite hydrogels decreased with the increasing cross-linker content.     

Drug carrying hydrogel base wound dressing

A special drug carrying hydrogel base wound dressing by radiation preparation is developed for hospital uses. The dressing possesses high water absorption property. Radiation preparation is carried out using a Van de Graaff Accelerator as an electron radiation source. The effect of absorbed dose and cmount of crosslinking agent on the gel fraction and swelling ratio of the hydrogel were determined respectively. As a bio-medical material, standard tests were made. Results showed properties conforming with requirements for clinical applications. Results obtained from clinical tests were good.     

Janus hydrogel with dual antibacterial and angiogenesis functions for enhanced diabetic wound healing

Anti-infection and neovascularization at the wound site are two vital factors that accelerate diabetic wound healing. However, for a wound healing dressing, the two functions need to work at different sites(inner and outer), giving big challenges for dressing design. In this study, we fabricated a novel sodium alginate/chitosan(SA/CS) Janus hydrogel dressing by the assembly of SA hydrogel loaded with silver nanoparticles(Ag NPs) and CS hydrogel impregnated with L-arginine loaded sodium alginate ...     

Novel Poly(vinyl alcohol)/Chitosan/Modified Graphene Oxide Biocomposite for Wound Dressing Application

Rapid absorption of wound exudate and prevention of wound infection are prerequisites for wound dressing to accelerate wound healing. In this study, a novel kind of promising wound dressing is developed by incorporating polyhexamethylene guanidine (PHMG)‐modified graphene oxide (mGO) into the poly(vinyl alcohol)/chitosan (PVA/CS) matrix, conferring the dressing the required mechanical properties, higher water vapor transmission rate (WVTR), less swelling time, improved antibacterial activity, and more cell proliferation compared to the PVA/CS film crosslinked by genipin. In vivo experiments indicate that the PVA/CS/mGO composite film can accelerate wound healing via enhancement of the re‐epithelialization. PVA/CS/mGO composite film with 0.5 wt% mGO sheets displays the best wound healing properties, as manifested by the 50% higher antibacterial rate compared to GO and the wound healing rate of the mouse using this dressing is about 41% faster than the control group and 31% faster than the pure PVA/CS dressing. The underlying mechanism of the accelerated wound healing properties may be a result of the improved antibacterial ability to eradicate pathogenic bacteria on the wound area and maintain an appropriate moist aseptic wound healing environment to accelerate re‐epithelialization. These findings suggest that this novel composite PVA/CS/mGO film may have promising applications in wound dressing.     

Physically crosslinked poly(vinyl alcohol)-hydroxyethyl starch blend hydrogel membranes: Synthesis and characterization for biomedical applications

Poly(vinyl alcohol), PVA is a polymer of great importance because of its many appealing characteristics specifically for various pharmaceutical and biomedical applications. Physically crosslinked hydrogel membranes composed of different amounts of hydroxyethyl starch (HES) in (PVA) and ampicillin were prepared by applying freeze–thawing method. This freezing–thawing cycle was repeated for three consecutive cycles. Physicochemical properties of PVA–HES membrane gel such as gel fraction, swelling, morphology, elongation, tensile strength, and protein adsorption were investigated. Introducing HES into freeze–thawed PVA structure affected crystal size distribution of PVA; and hence physicochemical properties and morphological structure have been affected. Increased HES concentration decreased the gel fraction %, maximum strength and break elongation. Indeed it resulted into a significant incrementing of the swelling ability, amount of protein adsorption, broader pore size, and pore distribution of membrane morphological structure. Furthermore, an increase in HES concentration resulted in better and still lower thermal stability compared to virgin PVA and freeze–thawed PVA. The maximum weight loss of PVA–HES hydrogel membranes ranged between 18% and 60% according to HES content, after two days of degradation in phosphate buffer saline (PBS), which indicates they are biodegradable. Thus, PVA–HES hydrogel membranes containing ampicillin could be a novel approach for biomedical application e.g. wound dressing purposes.     

Hydrogel Complex Containing the Antimicrobial Peptide HX-12C Accelerates Healing of Infected Wounds

Bacterial infections of the wound surface can be painful for patients, and traditional dressings do not effectively address this problem. In this study, an antimicrobial wound dressing is prepared using a novel antimicrobial peptide, HX-12C. This hydrogel system is based on the natural biomaterials sodium alginate and gelatin, utilizing calcium carbonate as a source of Ca²⁺, and ionic cross-linking is facilitated by lowering the solution pH. The resulting sodium alginate/gelatin HX-12C-loaded hydrogel (CaAGEAM) has good mechanical and adhesion properties, biocompatibility and in vitro degradability. Its extraordinary antibacterial efficacy (>98%) is verified by an antibacterial experiment. More importantly, in vivo experiments further demonstrate its healing-promotion effect, with a 95% wound healing rate by day 9. Tissue staining demonstrates that the hydrogel containing antimicrobial peptides is effective in suppressing inflammation. The dressing promotes wound healing by stimulating the deposition of skin appendages and collagen. The results of this study suggest that composite hydrogels containing antimicrobial peptides are a promising new type of dressing to promote the healing of infected wounds.     

聚乙烯醇/壳聚糖复合水凝胶的物理化学性质

测定了聚乙烯醇(PVA)和壳聚糖(CS)复合水凝胶的平衡含水量、熔融焓、等温溶胀动力学和非等温失水动力学等性质,讨论了水凝胶的组成和制备参数对这些性质的影响.结果显示:PVA/CS复合水凝胶具有适宜于软骨修复替代材料的网络结构和平衡含水量.CS与PVA复合减弱了凝胶的结晶度,但却增强了水与凝胶支架的相互作用.尽管水凝胶力学拉伸强度有所降低,但却优化了凝胶的生物相容性和降解能力.PVA/CS复合水凝胶是一种潜在的软骨修复材料,作为一种理论研究的模型体系,它将促进热力学在复杂医用材料方面的应用.     

Cotton‐hydrogel composite for improved wound healing: Antimicrobial activity and anti‐inflammatory evaluation—Part 2

Infection is one of the major risk factors for the development of chronic wounds. Antimicrobial wound dressing has been pointed out as a viable option for the prevention and treatment of wound infections. Thus, we developed a composite material based on cotton textile substrates functionalized with cyclodextrin‐hydroxypropyl methyl cellulose‐based hydrogel. The composites' ability to encapsulate and release gallic acid (antimicrobial phenolic acid) was evaluated, as well as their mechanical properties and antimicrobial and anti‐inflammatory capacity. All composites were able to retain gallic acid in their structure, with similar loading profile. The presence of gallic acid on composites was confirmed by FTIR and TGA. Composites storage moduli was reduced by the presence of gallic acid. The results suggest a straight relation between the swelling ability and gallic acid drug delivery profile. The drug delivery mechanism, of the developed composites, was mainly controlled by Fickian diffusion, based on the experimental data fitting to the Peppas‐Sahlin model. Gallic acid antimicrobial and anti‐inflammatory properties were transferred to the composite materials. According to the results, the developed composites can be applied on the prevention or treatment of chronic wounds.     

Dehydration of acetic acid by pervaporation using SPEK-C/PVA blend membranes

Sulfonated cardo polyetherketone (SPEK-C) and poly(vinyl alcohol) (PVA) blend membranes were prepared by solution casting method and used in pervaporation (PV) dehydration of acetic acid. The membranes were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and contact angle meter. The results show that thermal crosslinking occurred to the membrane under high temperature annealing. The effective d-spacing (inter-segmental spacing) decreased with PVA content decreasing. The hydrophilicity of the blend membrane increased with SPEK-C content increasing. Swelling and sorption experiments show that the swelling degree of the blend membrane increased, however both the sorption and diffusion selectivities decreased with increasing PVA content. The diffusion selectivity is higher than the sorption selectivity. This suggests that PV dehydration of acetic acid is dominated by the diffusion process. The pervaporation separation index (PSI) of the membrane increases with increasing PVA content and arrives at a maximum when the SPEK-C/PVA ratio is 3/2, then decreases with further addition of PVA. The membrane has an encouraging separation performance with a flux of 492 g m⁻² h⁻¹ and separation factor of 59.3 at 50 °C at the feed water content 10 wt%.     

Hyaluronic acid-methacrylic anhydride/polyhexamethylene biguanide hybrid hydrogel with antibacterial and proangiogenic functions for diabetic wound repair

Diabetic wounds lead to a decrease in quality of life and an increase in mortality. Current treatment strategies include preventing bacterial adhesion while improving microcirculation. As a new type of wound dressing that imitates natural skin, hydrogel has gradually emerged with its excellent properties. However, existing hydrogels rarely achieve satisfactory results in promoting wound repair and antibacterial simultaneously. In this case, we prepared methacrylic anhydride chemically modified hyaluronic acid as a hydrogel matrix, added polyhexamethylene biguanide as an antibacterial component, and loaded sodium alginate/salidroside composite microspheres which could sustainably release salidroside and thus promote angiogenesis. Hybrid hydrogel (HAMA/PHMB-Ms) was synthesized via photocrosslinking, and its chemical structure, particle size distribution and microstructure were characterized. The satisfactory antibacterial properties of the HAMA/PHMB(15%)-Ms hydrogel were studied in vitro, and its antibacterial rates against E. coli and S. aureus were 97.85% and 98.56%, respectively. In addition, after demonstrating its good biocompatibility, we verified that the HAMA/PHMB-Ms hydrogel has increased granulation tissue formation, more collagen deposition, more subcutaneous capillary formation, and better wound healing than blank control, HAMA and HAMA/PHMB hydrogel on the back wound model of diabetic mice. The results confirmed that HAMA/PHMB-Ms hydrogel was a promising material for the treatment of the diabetic wounds.     

Preparation and characterization of wool fiber reinforced nonwoven alginate hydrogel for wound dressing

Wound healing is a complex process which requires an appropriate environment for quick healing. Recently, biodegradable hydrogel-based wound dressings have been seen to have high potential owing to their biodegradability and hydrated molecular structure. In this work, a novel biodegradable composite of sodium alginate hydrogel with wool needle-punched nonwoven fabric was produced for wound dressing by sol–gel technique. The wool nonwoven was dipped in the sodium alginate-water solution and then soaked in calcium chloride solution which resulted in hydrogel formation. FTIR analysis and SEM images confirm the presence of alginate hydrogel inside the needle-punched wool nonwoven fabric. The wound exudate absorbing capacity of hydrogel based wool nonwoven was increased 30 times as compared to pure wool nonwoven. Moreover, the tensile strength and moisture management properties of hydrogel based nonwoven were also enhanced. The unique combination of alginate hydrogel with biocompatible wool nonwoven fabric provides moist environment and can help in cell proliferation during wound healing process.

     

肝素钠/聚乙烯醇复合水凝胶的制备与性能

通过循环冷冻-解冻法,制成了肝素钠/聚乙烯醇(HS/PVA)复合水凝胶材料。 探讨了不同质量分数肝素钠对复合水凝胶材料的可见光透过率、含水率、亲水性、力学性能以及肝素钠释放量的影响。 结果表明,复合水凝胶的可见光透过率为92%以上,溶胀平衡的含水率为72%~78%,亲水性较纯PVA水凝胶有所提升,拉伸强度和断裂伸长率都稍有下降。 细胞粘附实验结果表明,适量的肝素钠的释放可以达到减少细胞粘附的效果。 这种HS/PVA复合水凝胶材料有望用作人工角膜中心区材料。     

On‐Demand Dissolution of a Dendritic Hydrogel‐based Dressing for Second‐Degree Burn Wounds through Thiol–Thioester Exchange Reaction

An adhesive yet easily removable burn wound dressing represents a breakthrough in second‐degree burn wound care. Current second‐degree burn wound dressings absorb wound exudate, reduce bacterial infections, and maintain a moist environment for healing, but are surgically or mechanically debrided from the wound, causing additional trauma to the newly formed tissues. We have developed an on‐demand dissolvable dendritic thioester hydrogel burn dressing for second‐degree burn care. The hydrogel is composed of a lysine‐based dendron and a PEG‐based crosslinker, which are synthesized in high yields. The hydrogel burn dressing covers the wound and acts as a barrier to bacterial infection in an in vivo second‐degree burn wound model. A unique feature of the hydrogel is its capability to be dissolved on‐demand, via a thiol–thioester exchange reaction, allowing for a facile burn dressing removal.     

Development of honey hydrogel dressing for enhanced wound healing

Radiation at 25 and 50 kGy showed no effect on the acidic pH of the local honey, Gelam, and its antimicrobial property against Staphylococcus aureus but significantly reduced the viscosity. Honey stored up to 2 years at room temperature retained all the properties studied. Radiation sterilized Gelam honey significantly stimulated the rate of burn wound healing in Sprague-Dawley rats as demonstrated by the increased rate of wound contraction and gross appearance. Gelam honey attenuates wound inflammation; and re-epithelialization was well advanced compared to the treatment using silver sulphadiazine (SSD) cream. To enhance further the use of honey in wound treatment and for easy handling, Gelam honey was incorporated into our hydrogel dressing formulation, which was then cross-linked and sterilized using electron beam at 25 kGy. Hydrogel with 6% of honey was selected based on the physical appearance.     

化学-物理法制备聚乙烯醇/壳聚糖/纳米羟基磷灰石复合水凝胶及其性能

采用化学 物理交联法制备了聚乙烯醇/壳聚糖/纳米羟基磷灰石（PVA/CS/n-HA）复合水凝胶材料。 通过对比其含水率、拉伸强度、红外光谱和TG谱图,探讨了PVA含量及戊二醛加入量对材料性能的影响。 结果表明,m(PVA)∶m（CS+n-HA）=5∶1,戊二醛质量分数为2%时,复合水凝胶材料具有较好的综合性能：含水率为82.0%、拉伸强度为2.14 MPa、断裂伸长率为343.26%;同步热分析表明,25~140 ℃,仅存在水分的蒸发,直至360 ℃材料才发生分解,说明材料的热稳定性良好;红外分析表明,CS与戊二醛发生了交联反应。