铒激光脉冲消融泌尿结石和胆结石比较研究

利用光学弱相干显微成像系统对脉冲激光消融硬生物组织后形成的凹坑二维和三维形貌进行了扫描,分析了Erbium∶YAG激光脉冲消融生物硬组织特性.结果表明:相同激光参量条件下,消融胆结石比消融泌尿结石具有更高的消融效率;消融胆结石或消融泌尿结石时,脉冲能量越大,消融效率越高;消融效率提高主要体现在凹坑表面直径更宽、高度更深...     

脉冲CO_2激光伴水喷雾的骨组织消融

评估水喷雾条件对脉冲激光辐照骨硬组织的消融速率、消融效率以及组织表面形态学变化的影响。实验样品为新鲜离体牛胫骨组织;光源为脉冲CO2激光(波长10.64μm),脉冲频率60 Hz,能量密度26.5 J/cm2,光束经关节臂传输后聚焦在组织样品表面进行垂直点状照射,光斑尺寸为400μm,辐照时间10 s。激光辐照时,水雾以45°角倾斜向组织表面喷射,喷水速率分别设置为0(无喷水),0.26,0.5,0.6,0.7和0.9 mL/s。辐照后,体式显微镜观察组织样品表面形貌变化,OCT技术测量弹坑深度,扫描电镜观察弹坑微结构变化。结果表明,水喷雾条件对脉冲CO2激光骨硬组织的消融速率,消融效率以及组织表面形态学变化具有重要影响:水喷雾不仅可以起到冷却和降低热损伤的作用,通过优化选择激光辐照参数和喷水速率,可以显著增大消融速率和消融效率,改善靶组织表面的形态结构。     

第二讲光电子技术在保健医疗和生物学应用中的进展

文章论述了激光与光电子技术在人类保健、医疗以及生命科学应用中的作用和意义.综述了光活检技术、光美容医疗和生物光子技术等光电子技术在保健、医疗和生物学领域中的具体应用.重点介绍了：（1）用于组织病理诊断的光活检技术,其中包括光活检的发展历史、技术优点、研究现状,以及荧光光谱和成像技术等实用光活检技术的临床应用;（2）非消融性光疗的基本作用机制和研究进展;（3）扫描共焦显微术、多光子荧光显微术、近场光学扫描显微术和光镊等显微生物成像技术的工作原理和应用.最后,展望了激光与光电子技术在生命科学中的应用前景.     

光纤传输调Q铥激光微外科手术刀切割生物软组织实验研究

为了评估光纤传输波长为2.013μm的调Q铥激光作为微外科手术刀的可行性,研究200μm芯径的光纤传输频率为1kHz、脉宽为400~1400ns的调Q铥激光在不同能量和不同切割速度条件下切割新鲜猪肾组织的性能。采用专业相机拍摄组织切割后的切割线形貌,光学显微镜拍摄组织切片凹坑形貌,使用科学图像分析软件测量凹坑形貌参数,数据统计分析软件分析实验数据。结果表明相同能量条件下切割速度越大,切割效果越不明显。相同切割速度时,激光脉冲能量越大切割效果越明显。光纤传输高频调Q的铥激光可期望作为微外科手术刀在临床上得到应用。     

光学成像在疾病诊断中的应用

当前，医生们利用各种成像技术与疾病进行斗争，其中光学成像技术是获得高分辨率图像的新方法，其原理是每种生物介质具有各自特有的光谱特性，可赖以区分病变组织和正常组织，或对潜在问题准确定位。而光学相干层析则是最精确的光学成像技术，可提供１０～２０μｍ量级的高分辨率及比迄今为止任何其他技术都高的灵敏度。本文着重讨论光学相干层析术的基本原理及目前发展状况     

生物医学领域中超连续激光光谱技术的研究进展

超连续谱激光指的是当泵浦激光穿过特殊光波导时,一系列的非线性效应引起入射激光束的光谱展宽,从而输出宽光谱激光束。随着超快激光和光子晶体光纤技术的发展,利用超短脉冲在光子晶体光纤中的传播链产生相干的且亮度高的超连续谱激光成为了一种理想的白光源。自从超连续谱激光源投入应用以来,其应用领域越来越广。尤其在生物医学的细胞、血液等样品分析当中,荧光光谱学、流式细胞仪、共焦显微、光学相干层析等技术都是强有力的分析工具,在采用这些先进技术的科学仪器中,超连续谱激光源成为了一种主要光学部件。首先对超连续谱激光源的国际研究进展作了详细介绍,然后对超连续激光光谱技术在显微成像、流式细胞仪、荧光寿命成像显微、荧光共振能量转移、光学相干层析、共焦显微生物医学分析等生物医学领域中的发展及应用作了综合阐述。对超连续激光光谱技术在非接触式血液制品鉴别的需求、方案及研究进展进行了重点论述,包括覆盖400～2 000 nm光谱范围的光纤化轻型超连续谱激光光源研究;采用超连续谱激光光谱方法探索不同物种血液的种属特征;根据大数据的血液样品光谱特征元数据库分析建立数学模型,利用数学模型实现对血液样品种属光谱学判定;血液鉴别光谱分析便携式整机系统研发等。对超连续激光光谱技术在生物医学领域的应用前景作了展望。     

新型成像技术的实验系统研究

光学相干层析成像是一种新型成像技术。超辐射发光二极管和超短脉冲飞秒激光是能满足成像系统要求的理想光源。在开展光学相干层析相关技术研究的基础上 ,建立了国内第一台上述两种光源的成像实验研究装置 ,对系统的横向、纵向分辨率等基本性能进行了测定 ;并对多种实际样品进行了层析成像。     

调Q双红外脉冲激光皮下消脂初探

人体过多的脂肪严重影响形体美和健康。为了提高消脂效率可选择高吸收系数的激光,但其不易穿透表皮和真皮到达脂肪表面进行消脂。基于消融性微小光热解效应和选择性光热解效应的基本原理,采用聚焦、调Q的2.75 mm波长中红外脉冲激光消融皮肤表皮和真皮,形成微小的通道,便于后续聚焦、调Q的2.3 mm波长红外脉冲激光能量无损地穿过通道选择性光热解脂肪组织,光热解产物通过新陈代谢排出体外,微小消融区在周围正常组织作用下快速愈合,实现消脂治疗安全性和有效性的和谐统一。该研究可为皮肤科手术治疗提供一种新方法。     

激光安全与防护

叙述了激光与材料相互作用过程中引起相干受激光散射的机制,以及形成材料表面波纹的特性。在激光波长1.06拌m、能量15 mJ、光斑直径2 mm、脉冲半峰全宽约10ns和人射方向为布儒斯特角的条件下,进行了脉冲激光辐照硅材料形成表面波纹的实验研究。在脉冲激光辐照硅材料表面功率密度略大于材料损伤闭值的条件下,发现了硅材料表面形成的平行等间距直线条纹结构。用光学显微镜和原子力显微镜分别测量了被辐照硅材料表面的波纹形貌特征。在假设硅     

激光分光瞳共焦显微镜系统研制

为了满足生物类等样品对大工作距和高分辨率共焦显微镜的需求,将分光瞳技术与激光共焦显微技术结合应用到成像系统上。阐述了激光分光瞳共焦显微成像原理,首次成功搭建了相应的显微镜成像测量系统。理论分析和实验表明:分光瞳共焦显微技术独特的非共轴结构使系统的轴向分辨力是相同数值孔径物镜单轴系统的3倍以上,对理论高度为100nm的台阶样品进行成像测试,得到的样品三维形貌,成像质量良好。     

Enhancement of ablation rate and production of colloidal nanoparticles by irradiation of metals with nanosecond pulsed laser in presence of external electric field

This paper presents the results of experimental study on the effect of electric field on the ablation rate during the nanosecond pulsed laser ablation of aluminum and copper in deionized water. The effect of electric field strength on the material removal rate and its mechanisms were investigated both in the electric field parallel and perpendicular to the laser beam path schemes. The ablation rate was estimated by measuring the dimensions of craters on the target induced by laser. The crater dimensions and optical properties of the produced colloidal nanoparticles were characterized by means of optical microscopy and UV–Vis absorption spectroscopy, respectively. The results indicate that pulsed laser ablation in the presence of an electric field significantly leads to higher material removal rate. The experimental results also confirm that the crater geometry extremely depends on the direction of the electric field with respect to the laser beam direction. The UV–Vis spectra show that the nanoparticles production efficiency increases with increasing the electric field strength.     

ICAN as a new laser paradigm for high energy,high average power femtosecond pulses

The application of petawatt lasers to scientific and technological problems is advancing rapidly. The usefulness of these applications will depend on being able to produce petawatt pulses at much higher repetition rates than is presently possible. The International Coherent Amplification Network (ICAN) consortium seeks to design high repetition rate petawatt lasers using large scale coherent beam combination of femtosecond pulse amplifiers built from optical fibres. This combination of technologies has the potential to overcome many of the hurdles to high energy, high average power pulsed lasers, opening up applications and meeting societal challenges.     

Wavelength dependence of soft tissue ablation by using pulsed lasers

Pulsed laser ablation of soft biological tissue was studied at 10.6-, 2.94-, and 2.08-μm wavelengths. The ablation effects were assessed by means of optical microscope, the ablation crater depths were measured with reading microscope. It was shown that Er:YAG laser produced the highest quality ablation with clear,sharp cuts following closely the patial contour of the incident beam and the lowest fluence threshold. The pulsed CO2 laser presented the moderate quality ablation with the highest ablation efficiency. The craters drilled with Ho:YAG laser were generally larger than the incident laser beam spot, irregular in shape, and clearly dependent on the local morphology of biotissue. The blation characteristics, including fluence threshold and ablation efficiency, varied substantially with wavelength. It is not evident that water is the only dominant chromophore in tissue.     

Coherent beam combining of pulsed fiber lasers with hybrid phase control

We demonstrate a scalable architecture for coherent combining of all-fiber pulsed lasers with hybrid phase control involving passive phasing and active phasing for the first time. Synchronized and passive phased pulsed laser array is built by intra-activity phase modulation. Active phase control on the passive phased pulsed laser array using stochastic parallel gradient descent algorithm provides stable in-phase coherent beam combining pattern in a turbulent atmosphere. The fringe visibility is increased from 0 two 0.43 and the power encircled in the main-lobe is 1.616 times increased when the system evolves from passive phasing to hybrid phasing. The architecture can be easily scaled up to high power by increasing power of each individual laser, number of laser elements and introduction of power amplifiers, which will lead a promising way for scaleable high power coherent beam combining of pulsed lasers.     

Resonant infrared pulsed laser deposition of cyclic olefin copolymer films

Barrier materials on thin-film organic optoelectronic devices inhibit the uptake of water, oxygen, or environmental contaminants, and fabricating them is a major challenge. By definition, these barrier layers must be insoluble, so the usual routes to polymer- or organic-film deposition by spin coating are not problematic. In this paper, we report comparative studies of pulsed laser deposition of cyclic olefin copolymer (COC), an excellent moisture barrier and a model system for a larger class of protective materials that are potentially useful in organic electronic devices, such as organic light-emitting diodes (OLEDs). Thin films of COC were deposited by resonant and nonresonant infrared pulsed laser ablation of solid COC targets, using a free-electron laser tuned to the 3.43 μm C–H stretch of the COC, and a high-intensity nanosecond Q-switched laser operated at 1064 nm. The ablation craters and deposited films were characterized by scanning-electron microscopy, Fourier-transform infrared spectrometry, atomic-force microscopy, high-resolution optical microscopy, and surface profilometry. Thermal-diffusion calculations were performed to determine the temperature rise induced in the film at the C–H resonant wavelength. The results show that resonant infrared pulsed laser deposition (RIR-PLD) is an effective, low-temperature thin-film deposition technique that leads to evaporation and deposition of intact molecules in homogeneous, smooth films. Nonresonant PLD, on the other hand, leads to photothermal damage, degradation of the COC polymers, and to the deposition only of particulates.     

基于衍射光学元件的激光相干合成研究进展

从衍射光学元件的基本原理出发,围绕连续波和脉冲波两大应用领域,综述了国内外基于衍射光学元件实现共孔径相干合成的研究进展。在国内,上海光学精密机械研究所分别实现了连续光和脉冲光的合成,连续光实现了206 W的输出功率,光束质量1.38,合束效率29.6%;脉冲光实现了峰值功率1.02 kW,重复频率2.2 MHz的ns级脉冲相干合成光束,合束效率61%。在国外,连续光方面实现了5 kW量级的合成光输出,合束效率82%;脉冲光方面实现了平均功率150 mW,重复频率100 MHz的fs级脉冲相干合成光束,合束效率83.4%。最后对基于衍射光学元件的激光相干合成技术的未来发展做出了展望,相信在不久的将来,基于衍射光学元件的相干合成技术会不断发展,逐渐突破技术瓶颈,从而为更多的应用领域奠定坚实基础。     

Practical application of cross correlation technique to measure jitter of master-oscillator-power-amplifier (MOPA) laser system

The Linac coherent light source (LCLS) at the SLAC National Accelerator Laboratory (SLAC) is the world’s first hard X-ray free electron laser (XFEL) and is capable of producing high-energy, femtosecond duration X-ray pulses. A common technique to study fast timescale physical phenomena, various “pump/probe” techniques are used. In these techniques there are two lasers, one optical and one X-ray, that work as a pump and as a probe to study dynamic processes in atoms and molecules. In order to resolve phenomena that occur on femtosecond timescales, it is imperative to have very precise timing between the optical lasers and X-rays (on the order of ～20 fs or better). The lasers are synchronized to the same RF source that drives the accelerator and produces the X-ray laser. However, elements in the lasers cause some drift and time jitter, thereby de-synchronizing the system. This paper considers cross-correlation technique as a way to quantify the drift and jitter caused by the regenerative amplifier of the ultrafast optical laser.     

Influence of optical nonlinearity on combining efficiency in ultrashort pulse fiber laser coherent combining system

The influence of optical nonlinearity on combining efficiency in ultrashort pulse fiber laser coherent combining system is investigated theoretically and experimentally. In the theoretical work, a new theoretical algorithm is presented for the coherent combining efficiency, which can be used to quantify the spectral coherence decay induced by optical nonlinearity imbalance between the sub-beams. The spectral information of the sub-beam is obtained by numerically solving the nonlinear Schrödinger equation (NLSE) in this algorithm to ensure an accurate prediction. In the experimental work, the coherent combining of two all-fiber picosecond lasers is achieved, and the influence of imbalanced optical nonlinearity on the combining efficiency is studied, which agrees with the theoretical prediction. This paper reveals the physical mechanism for the influence of optical nonlinearity on the combining efficiency, which is valuable for the coherent combining of ultrashort pulse fiber laser beams.     

脉冲CO2激光器注入锁定特性的数值模拟

扩展了脉冲CO2激光器的多频动力学理论。将多频动力学模型中的光强方程用光场方程代替,建立了脉冲CO2激光器注入锁定的理论计算模型。采用四阶经典龙格库塔(Runge-Kutta)算法,计算了不同注入信号强度和失谐频率下的激光输出功率、瞬时频率和增益系数。研究了注入锁定宽调谐横向激励大气压(TEA)CO2激光器模式锁定的稳定性问题。研究结果表明,当频率偏离谱线中心600 MHz时,为了实现稳定的模式锁定所需要的注入信号强度应比在谱线中心处高出两个数量级。理论结果和已发表的实验数据符合得很好。研究进一步预示:当激光器气压增大至10倍大气压时,对于同样调谐范围所需的注入信号强度仅比在谱线中心处高出10%左右。