Modification of LiCo1/3Ni1/3Mn1/3O2 cathode material by CeO2-coating

LiCo_1/3Ni_1/3Mn_1/3O₂ was coated by a layer of 1.0 wt% CeO₂ via sol-gel method. The bared and coated LiMn_1/3Co_1/3Ni_1/3O₂ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammogram (CV) and galvanotactic charge-discharge test. The results show that the coating layer has no effect on the crystal structure, only coating on the surface; the 1.0 wt% CeO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ exhibits better discharge capacity and cycling performance than the bared LiCo_1/3Ni_1/3Mn_1/3O₂. The discharge capacity of 1.0 wt% CeO₂-coated cathode is 182.5 mAh·g⁻¹ at a current density of 20 mA·g⁻¹, in contrast to 165.8 mAh·g⁻¹of the bared sample. The discharge capacity retention of 1.0 wt% CeO₂-coated sample after 12 cycles reaches 93.2%, in comparison with 86.6% of the bared sample. CV results show that the CeO₂ coating could suppress phase transitions and prevent the surface of cathode material from direct contact with the electrolyte, thus enhance the electrochemical performance of the coated material.     

Theoretic Diffraction Research on the Order-Disorder Effect of Transition Metal in Li(Ni1/3Co1/3Mn1/3)O2

Li(Ni_1/3Co_1/3Mn_1/3)O₂的(3b)位有序-无序效应研究

曹春晖^1,2, 张建¹, 杨传铮¹, 夏保佳¹

（1.上海微系统与信息技术研究所,上海 200050;

2.中国科学院大学, 北京100049）

创新点说明：

提出了有序度的概念,通过理论模拟了过渡金属在3b位不同有序度下的衍射情况。

研究目的：

借助理论衍射研究镍钴锰在三元材料中的占位情况,为实际得到的衍射数据分析起指导作用。

研究方法和结果：

借助Powercell程序模拟不同结构下的衍射情况。结果表明：对于Li(Ni1/3Co1/3Mn1/3)O2,基体衍射线的强度不随有序度而变化,有序度增加时,超点阵衍射线强度增加,但是即使对于有序度最大时,超点阵线的相对强度只有0.225%和0.043%。

结论：

3b位的有序无序很难通过常规的衍射实验观测到,必须提高X射线源的强度才可能观测到。

关键词：Li(Ni1/3Co1/3Mn1/3)O2, 有序-无序,超结构,衍射

     

Characteristics of LiCoO2, LiMn2O4 and LiNi0.45Co0.1Mn0.45O2 as cathodes of lithium ion batteries

LiNi_0.45Co_0.10Mn_0.45O₂ was synthesized from Li₂CO₃ and a triple oxide of nickel, cobalt and manganese at 950 °C in air. The structures and characteristics of LiNi_0.45Co_0.10Mn_0.45O₂, LiCoO₂ and LiMn₂O₄ were investigated by XRD, SEM and electrochemical measurements. The results show that LiNi_0.45Co_0.10Mn_0.45O₂ has a layered structure with hexagonal lattice. The commercial LiCoO₂ has sphere-like appearance and smooth surfaces, while the LiMn₂O₄ and LiNi_0.45Co_0.10Mn_0.45O₂ consist of cornered and uneven particles. LiNi_0.45Co_0.10Mn_0.45O₂ has a large discharge capacity of 140.9 mA · h/g in practical lithium ion battery, which is 33.4% and 2.8% above that of LiMn₂O₄ and LiCoO₂, respectively. LiCoO₂ and LiMn₂O₄ have higher discharge voltage and better rate-capability than LiNi_0.45Co_0.10Mn_0.45O₂. All the three cathodes have excellent cycling performance with capacity retention of above 89.3% at the 250th cycle. Batteries with LiMn₂O₄ or LiNi_0.45Co_0.10Mn_0.45O₂ cathodes show better safety performance under abusive conditions than those with LiCoO₂ cathodes. Foundation item: Project(50302016) supported by the National Natural Science Foundation of China; Project(2005037698) supported by the Postdoctoral Science Foundation of China     

Synthesis and electrochemical properties of Cr-doped Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> cathode materials for lithium-ion batteries

Cr-doped Li₃V₂(PO₄)₃ cathode materials Li₃V_2−x Cr _x (PO₄)₃ were prepared by a carbothermal reduction(CTR) process. The properties of the Cr-doped Li₃V₂(PO₄)₃ were investigated by X-ray diffraction (XRD), scanning electron microscopic (SEM), and electrochemical measurements. Results show that the Cr-doped Li₃V₂(PO₄)₃ has the same monoclinic structure as the undoped Li₃V₂(PO₄)₃, and the particle size of Cr-doped Li₃V₂(PO₄)₃ is smaller than that of the undoped Li₃V₂(PO₄)₃ and the smallest particle size is only about 1 μm. The Cr-doped Li₃V₂(PO₄)₃ samples were investigated on the Li extraction/insertion performances through charge/discharge, cyclic voltammogram (CV), and electrochemical impedance spectra(EIS). The optimal doping content of Cr was that x=0.04 in the Li₃V_2−x Cr _x (PO₄)₃ samples to achieve high discharge capacity and good cyclic stability. The electrode reaction reversibility was enhanced, and the charge transfer resistance was decreased through the Cr-doping. The improved electrochemical performances of the Cr-doped Li₃V₂(PO₄)₃ cathode materials are attributed to the addition of Cr³⁺ ion by stabilizing the monoclinic structure. Funded by the Guangxi Natural Science Foundation(No. 0832259) and the National Basic Research Program of China (No. 2007CB613607)     

Synthesis and characterization of Li1.05Co0.3Ni0.35Mn0.3M0.05O2 (M=Ge,Sn)cathode materials for lithium ion battery

In order to improve the electrochemical performance and thermal stability of Li_1.05Co_1/3Ni_1/3Mn_1/3O₂ materials,Li_1.05Co_0.3Ni_0.35Mn_0.3M_0.05O₂（M=Ge,Sn）cathode materials were synthesized via co-precipitation method.The structure,electrochemical performance and thermal stability were characterized by X-ray diffraction（XRD）,charge/discharge cycling,cyclic voltammetry（CV）,electrochemical impedance spectroscopy（EIS）and differential scanning calorimetry（DSC）.ESEM showed that Sn-doped and Ge-doped slightly increased the size of grains.XRD and CV showed that Sn-doped and Ge-doped powders were homogeneous and had the better layered structure than the bare one.Sn-doped and Ge-doped improved high rate discharge capacity and cycle-life performance.The reason of the better cycling performance of the doped one was the increasing of lithium-ion diffusion rate and charge transfer rate.Sn-doped and Ge-doped also improved the mateials thermal stability.     

Luminescent properties of BaO-La2O3-B2O3 glasses with dopant

The luminescent properties of glasses synthesized in air atmosphere by conventional high temperature process were stud{ed. The emissions spectra of Eu^2 and Eu^3 were observed in BaO-La2O3-B2O3-Eu2O3 glasses.The results show that the broad emission peaks at 430 nm correspond to 5d→4f emission transition of Eu^2 , the sharp emission peaks at 592, 616, 650 and 250 nm correspond to 5^D0→1Fj(j=1--4) emission transition of Eu^3 ,respectively, which indicates that the BaO-La2O3a-B2O3-Eu2O3 glass can convert ultraviolet and green omponents of sunlight into blue and red light so as to increase the intensity of blue and red light, respectively. The luminescent in--tensity of Eu^2 increases with increasing the molar ratio of Tb^3 in BaO-La2O3-B2O3-Eu2O3a-Tb4O3 glasses, whereas the luminescent intensity of Eua^3 decreases. So the luminescent intensity of Eu(Ⅲ,Ⅱ) is influenced by Tb^3 .These phenomena can be explained by electron transfer mechanism; Eu^3 (4f6) Tb^3 (4f^8)→Eu^2 (4f′) Tb^4 (4f′). Taking advantage of the luminescent properties of BaO-La2O3-B2O3-Eu2O3 glasses, light-conversion glass for agriculture can be produced.     

Preparation of LiFePO4 for lithium ion battery using Fe2P2O7 as precursor

In order to obtain a new precursor for LiFePO4, Fe2P2O7 with high purity was prepared through solid phase reaction at 650 ℃ using starting materials of FeC2O4 and NH4H2PO4 in an argon atmosphere. Using the as-prepared Fe2P2O7, Li2CO3 and glucose as raw materials, pure LiFePO4 and LiFePO4/C composite materials were respectively synthesized by solid state reaction at 700 ℃ in an argon atmosphere. X-ray diffractometry and scanning electron microscopy（SEM） were employed to characterize the as-prepared Fe2P2O7, LiFePO4 and LiFePO4/C. The as-prepared Fe2P2O7 crystallizes in the Cl space group and belongs to β-Fe2P2O7 for crystal phase. The particle size distribution of Fe2P2O7 observed by SEM is 0.4-3.0 μm. During the Li^＋ ion chemical intercalation, radical P2O7^4- is disrupted into two PO4^3- ions in the presence of O^2-, thus providing a feasible technique to dispose this poor dissolvable pyrophosphate. LiFePO4/C composite exhibits initial charge and discharge capacities of 154 and 132 mA·h/g, respectively.     

球形LiMn1.5Ni0.5O4材料的嵌脱动力学

为明晰Li Mn1.5Ni0.5O4正极材料的动力学性能,采用水热辅助共沉淀法合成了尖晶石Li Mn1.5Ni0.5O4正极材料,并采用扫描电镜(SEM)、X射线粉末衍射(XRD)和电化学阻抗(EIS)研究了材料的结构和锂离子嵌脱动力学.实验结果表明:共沉淀法制备的Li Ni0.5Mn1.5O4材料颗粒呈均匀球形,且平均粒径较小,粒度分布较窄.在循环过程中,Li Ni0.5Mn1.5O4的电荷转移电阻增大,锂离子扩散系数减小,进而电子电导率和离子电导率下降.温度升高后,Li Ni0.5Mn1.5O4材料的溶液电阻变化不大,但是电荷转移电阻逐渐增大,锂离子扩散系数逐渐减小;此外,随着温度的升高,Li Ni0.5Mn1.5O4材料的溶解速度加快,从而导致SEI膜的厚度增大.Li Ni0.5Mn1.5O4材料的嵌脱锂动力学与温度和循环次数有密切关系.     

第一性原理研究:Mg2+掺杂尖晶石型LiMn2O4的电子结构

尖晶石 LiMn₂O₄ 正极材料是在原有锂电池正极材料 LiCoO₂ 、LiNiO₂ 、LiMnO₂ 的基础上研发出来的优选 正极材料, 它相较于 LiCoO₂ 材料价格更加低廉热稳定性加强且安全性能有所提高。采用 Mg²⁺ 掺杂 LiMn₂O₄正极 材料, 利用基于密度泛函理论的第一性原理对 LiMg_0.5Mn_1.5O₄ 晶格常数与能带结构、态密度进行计算与分析。结 果表明: 新材料 LiMg_0.5Mn_1.5O₄ 的空间群为 F4332, 掺杂后晶胞参数 a 明显减小, 晶胞体积收缩; 掺杂量为 0.5 时明 显比掺杂量 0.125 时 Fermi 能量和能量密度高。Mg ²⁺ 掺杂能影响 LiMn₂O₄ 的晶体结构, 形成更加稳定的共价键。 掺杂量会改变 LiMn₂O₄ 的空间群影响到结构稳定性, 所以掺杂量不宜过大。     

Influence on performance and structure of spinel LiMn2O4 for lithium-ion batteries by doping rare-earth Sm

The spinel LiMn₂O₄ used as cathode materials for lithium-ion batteries was synthesized by mechano-chemistry fluid activation process, and modified by doping rare-earth Sm. Thesting of X-ray diffraction, cyclic voltammograms, charge-discharge and SEM was carried out for LiMn₂O₄ cathode materials and the modified materials. The results show that the cathode materials doped rare earth Li _x Mn_2−y Sm _z O₄ (0.95⩽x⩽1.2, 0⩽y⩽0.3, 0⩽z⩽0.2) exhibit standard spinel structure, high reversibility of electrochemistry and excellent properties of charge-discharge. In EC: DMC(1 : 1)+1 mol/L LiPF₆ electrolyte with discharge capacity more than 130 mA · h/g, and its capacity is deteriorated less than 15% after 300 cycles at room temperature and less than 20% after 200 cycles at 55°C. At the same time, Crystal Field Theory was applied to explain the function and mechanism of doped rare earth element. Foundation item: Project (02JJY2081) supported by the Natural Science Foundation of Hunan Province     

Direct synthesis of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-modified Li(Ni<Subscript>0.5</Subscript>Co<Subscript>0.2</Subscript>Mn<Subscript>0.3</Subscript>)O<Subscript>2</Subscript> cathode materials for lithium ion batteries

To improve the cyclic stability at high temperature and thermal stability, the spherical Al₂O₃-modified Li(Ni_0.5Co_0.2Mn_0.3)O₂ was synthesized by a modified co-precipitation method, and the physical and electrochemical properties were studied. The TEM images showed that Li(Ni_0.5Co_0.2Mn_0.3)O₂ was modified successfully with nano-Al₂O₃. The discharge capacity retention of Al₂O₃-modified Li(Ni_0.5Co_0.2Mn_0.3)O₂ maintained about 99% after 200 cycles at high temperature (55 °C), while that of the bare one was only 86%. Also, unlike bare Li(Ni_0.5Co_0.2Mn_0.3)O₂, the Al₂O₃-modified material cathode exhibited good thermal stability.     

Structure and electrochemical properties of La, F dual-doped iLa0.01Mn1.99O3.99F0.01 cathode materials

The cathode materials LiMn₂O₄ and rare earth elements La-doped or La and F dual-doped spinel lithium manganese oxides were synthesized by the citric acid-assisted sol-gel method. The synthesized samples were investigated by differential thermal analysis (DTA) and thermogravimetry (TG) measurements, X-ray diffraction (XRD), scanning electronic microscope (SEM), cyclic voltammetry (CV), and charge-discharge test. XRD data shows that all the samples exhibit the same pure spinel phase, and the LiLa_0.01Mn_1.99O_3.99F_0.01 and LiLa_0.01Mn_1.99O₄ samples have smaller lattice parameters and unit cell volume than LiMn₂O₄. SEM indicates that LiLa_0.01Mn_1.99O_3.99F_0.01 has a slightly smaller particle size and a more regular morphology structure with narrow size distribution. The charge-discharge test reveals that the initial capacities of LiMn₂O₄, LiLa_0.01Mn_1.99O₄, and LiLa_0.01Mn_1.99O_3.99F_0.01 are 129.9, 122.8, and 126.4 mAh·g⁻¹, and the capacity losses of the initial values after 50 cycles are 14.5%, 7.6%, and 8.0%, respectively. The CVs show that the La and F dual-doped spinel displays a better reversibility than LiMn₂O₄.     

Properties of plasma sprayed NiCrAlY+(ZrO2+Y2O3) coating on refractory steel surface

NiCrAlY+(ZrO₂+Y₂O₃) thermal barrier coating was prepared on the surface of refractory steel 1Cr18Ni9Ti with plasma spraying technique. The phases and microstructure of the thermal barrier coating were determined by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The results show that the bonding between thermal barrier coating and substrate is sound. The surface hardness of 1Cr18Ni9Ti reaches up to 1 000 HV, but that of substrate is only 300 HV. The patterns sprayed with CoNiCrAlY+(ZrO₂+Y₂O₃) ceramic coating have a good heat insulation effect at 800 °C for heat insulation temperature difference reaches 54 °C, which increases the operating temperature and service life of refractory steel. Foundation item: Project (5040202140) supported by Scientific Research Common Program of Beijing Municipal Commission of Education     

一步固相法制备高性能Li_2MnSiO_4/C锂离子电池正极材料

采用一步固相法合成了Li_2MnSiO_4/C正极材料,利用XRD,EIS和循环伏安测试对该材料进行了结构和电化学性能表征.研究了一步固相法中添加不同比例的葡萄糖对Li_2MnSiO_4材料性能的影响.结果表明:葡萄糖作碳源复合可以提高Li_2MnSiO_4正极材料的充放电比容量和循环性能,同时在一步固相合成法中还能细化Li_2MnSiO_4正极材料颗粒.葡萄糖添加量为6%时,制备得到的Li_2MnSiO_4/C正极材料首次可逆放电比容量为213.1 mAh/g.     

过硫酸铵表面处理对富锂锰基正极材料电化学性能的影响

为了提高锂离子电池富锂锰基正极材料的电化学性能,尤其是倍率性能,采用过硫酸铵作为处理剂对富锂锰基正极材料Li_(1.2)Mn_(0.54)Ni_(0.13)Co_(0.13)O_2进行表面处理,诱发化学预活化,形成有利于锂离子迁移的表面尖晶石结构。电化学测试结果显示,当过硫酸铵与Li_(1.2)Mn_(0.54)Ni_(0.13)Co_(0.13)O_2质量比为1:5时,经过硫酸铵表面处理后的正极表现出优异的电化学性能:0.2 C下放电容量为257.1 mAh/g,首圈库伦效率高达96.8%, 3 C大倍率下放电容量仍达到157.2 mAh/g。交流阻抗测试结果表明,适量过硫酸铵处理之后材料的界面电荷转移阻抗显著降低,导致锂离子界面迁移速率加快,表现出良好的倍率性能。这种简单易行的改性方法为实现富锂锰基正极在动力锂离子电池领域的应用提供了新思路。     

Molar heat capacities of La2Mo2O9 and La1.9Sr0.1MO209-δ

The molar heat capacities of La2Mo209 and La1.9Sr0.1MO209-δ were obtained using the differential scanning calorimetry （DSC） technique in a temperature range from 298 to 1473 K. The DSC curve of La2Mo209 showed an endothermal peak around 834 K corresponding to a first-order monoclinic-cubic phase transition, and the enthalpy change accompanying this phase transition is 5.99 kJ/mol. No evident endothermal peak existed in the DSC curve of La1.9Sr0.1MO209-δ, but a broad thermal anomaly existed in its heat capacity curve at around 832 K. In addition, the heat capacity values of La2Mo209 and La1.9Sr0.1MO209-δ began to decrease at 1196 and 1330 K, respectively. The non-transitional heat capacity values of La2Mo209 and La1.9Sr0.1MO209-δ were formulated using multiple regression analysis in two temperature ranges.     

Corrosion resistance of plasma sprayed NiCrAl+(ZrO2+Y2O3) thermal barrier coating on 18-8 steel surface

The corrosion resistance of NiCrAl+(ZrO₂+Y₂O₃) thermal barrier coating, formed with the plasma spraying technique, on the 18 - 8 steel surface was investigated. The phase structure and morphology of the coating were analyzed by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). The electrochemical corrosion behavior of the coating in 1.0 mol/L H₂SO₄ solution was studied by using electrochemical measurement methods. The results show that the gradient plasma spraying coating is composed of the NiCrAlY coating and the (ZrO₂+Y₂O₃) top coating, and the coating thickness is 360 μm. The microhardness of coating reaches 1 100 HV. The corrosion resistance of the plasma sprayed coating of the 18 - 8 steel surface is about 5 times as great as that of the original pattern. The corrosion resistance of the coating is enhanced notably. Foundation item: Project (5040202140) supported by Scientific Research Common Program of Beijing Municipal Commission of Education     

N掺杂Co3O4纳米片的制备以及活化过一硫酸盐的性能研究

采用牺牲模板法合成N掺杂Co₃O₄纳米片（N-Co NS）,通过透射电子显微镜（TEM）、原子力显微镜（AFM）和光电子能谱（XPS）对制备材料的形貌结构、化学组成进行分析,并通过催化活化过一硫酸盐（PMS）降解水中双酚A （BPA）来探究催化剂的催化性能.实验结果表明与Co₃O₄纳米颗粒（Co NP）、Co₃O₄纳米片（Co NS）相比,N-Co NS表现出了较高的催化性能.在PMS浓度为2 mmol·L^-1、BPA初始质量浓度为50 mg·L^-1的反应条件下,N-Co NS在10 min内完全降解水中的BPA,表明N掺杂和二维纳米片结构有利于催化剂性能的提升.通过pH及离子影响实验证实N-Co NS在复杂水化学环境中仍具有较高的活性.此外结合自由基捕获实验和电子顺磁共振（EPR）测试证实反应体系中产生了高氧化活性的羟基自由基和硫酸根自由基.     

Modification of nano-TiO2 by Al2O3 in-situ coating

A novel technology of in-situ coating Al₂O₃ on the surface of H₄TiO₄ was developed to prevent the aggregation of nano-TiO₂ powders and improve the dispersibility and thermal stability in the way of forming a uniform coating layer. The heterogeneous nucleation was conducted to prepare the precursor of nano-TiO₂ and then Al₂O₃ was coated on the surface of precursor. The effects of Al₂O₃ in-situ coating on the properties of nano-TiO₂ were investigated. The results show that H₄TiO₄ can be dispersed well under alkaline condition (pH 8.5) and the heterogeneous nucleation can be controlled easily. The optimized uniform coating layer is obtained by adding 5% (mass fraction) and 10% of Al₂O₃ and the aggregation of nano-TiO₂ powders is effectively inhibited and the dispersibility is obviously improved. The crystal sizes of TiO₂ powders are 12.3, 11.4 and 8.7 nm after coating 0,5% and 10% of Al₂O₃ respectively. Al₂O₃ on the surface of particulates in amorphous phase could increase the thermal stability of nano-particles after calcined at 550 °C. Foundation item: Project(04GK2007) supported by Hunan Industrial Key Project of Science and Technology     

Overcharge performance of LiMn2O4/graphite battery with large capacity

The LiMn₂O₄/graphite battery was fabricated and its 3 C/10 V overcharge performance was studied. Spinel LiMn₂O₄ was synthesized by solid-state method and 325680-type size full battery was fabricated. The structure and morphology of the powders were characterized by XRD and SEM technique, respectively. The battery explodes after 3 C/10 V overcharged test, and surface temperature of the battery case arrives at 290 °C in 12 s after exploding. Black air is given out with blast. Carbon, MnO, and Li₂CO₃ are observed in the exploded powders. The cathode electrode remains spinel structure with 5.0 V charged. Cracks in the cathode electrode particles are detected with the increase of voltage by SEM technique. The 5.0 V charged electrode can decompose into Mn₃O₄ at 400 °C. It is demonstrated that the decomposition of 5.0 V charged electrode can be promoted and Mn⁴⁺ can be deoxidized to Mn²⁺ by carbon and electrolyte through the simulation of blast process.