Inherently chiral biscalixarene cone–cone conformers consisting of calix[4]arene and calix[5]arene subunits

Inherently chiral biscalixarenes with hetero-cavities were synthesized by a covalent assembly of p-tert-butylcalix[5]arene with a 1,3-substituted calix[4]arene via 1,3-alkylation reaction and subsequent desymmetrization. The racemates were resolved by chiral HPLC method. ¹H NMR spectra, VT-NMR spectra, and theoretical calculations support that the calix[5]arene subunit of the inherently chiral calix[4][5]arene ester adopts a cone-in conformation, with the aromatic ring bearing the CH₂CO₂Et group tilting inward the calix[5]arene cavity. By contrast, such a cone-in structural feature of the calix[5]arene subunit disappears for the corresponding inherently chiral calix[4][5]arene carboxylic acid, due to the intramolecular hydrogen bonding between the carboxyl group and an ethereal oxygen of the glycolic chain.     

Mass spectroscopic investigation of bis-1,3-urea calix[4]arenes and their ability to complex N-protected α-amino acids

We report the ability of urea’s appended onto the upper-rim of conformationally locked ‘cone’ calix[4]arenes to show a preference for binding specific N-protected α-amino acids. Superior complexation (as judged by mass spectroscopy) between N-protected α-amino results and bis-1,3-N-benzylureas calix[4]arenes was observed when methylene bridges were present between the calix[4]arene ‘host’ and the urea motif. Interestingly we also demonstrate that subjecting mixtures of structurally diverse N-Fmoc-α-amino acids to a single bis-1,3-N-benzylurea derived calix[4]arene allows, in some cases, the calix[4]arene ‘host’ to selectively ‘pick out’ and complex a specific N-Fmoc amino acid from the mixture.     

Direct access to upper rim substituted mono- and diaryloxy calix[4]arenes via bis(spirodienone) route

A seemingly ipso-like nucleophilic substitution of the upper rim of p-tert-butylcalix[4]arene is accomplished by an indirect method involving calix[4]arene derived bis(spirodienone). This method not only provides both mono and 1,3-diaryloxy calixarenes but also enables the synthesis of upper rim monothio substituted calix[4]arenes. A modification of the methodology can be successfully extended for the selective synthesis of mono- and 1,3-diquinone calix[4]arenes having free hydroxyl groups at the lower rim, in fewer steps.     

Calix[4]arenes with 1,2- and 1,3-upper rim tetrathiafulvalene bridges

Herein we report the synthesis of several calix[4]arene derivatives with tetrathiafulvalene bridges at the upper rim. Calix[4]arene-tetrathiafulvalene (TTF) conjugates 4a–d, fixed in cone conformation and comprising two smaller 1,2-bridges, were prepared by cyclisation of tetrakis-chloromethylated calix[4]arene 1 with 2,3-dithiolates of TTFs. Larger calix[4]arene-TTF macrocycles 14 and 15, also in cone conformation, contain 1,3-bridges and were synthesised by cyclisation of 2,6- and 2,7-dithiolates of TTFs with bis-bromomethylated calix[4]arene 7. Redox properties of new calix[4]arene-TTF conjugates were characterised using cyclic voltammetry.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

含酰胺和席夫碱单元的杯[4]芳烃衍生物的合成与配合性能

杯[4]-1,3-二乙酸乙酯衍生物1与水合肼反应生成杯[4]芳烃酰肼衍生物2, 然后进一步与相应的芳醛反应, 高产率地合成了三个新型的含酰胺和席夫碱单元的杯[4]芳烃衍生物3a～3c和一例新型杯[4]冠醚4. 阳离子萃取实验表明新型杯芳烃衍生物比只含有酰胺基或席夫碱基的杯芳烃衍生物有更强的软金属离子配合性能, 杯[4]冠醚4还对Ag^＋有较好的选择性萃取能力.     

Exchange coupling mediated through-bonds and through-space in conformationally constrained polyradical scaffolds: calix[4]arene nitroxide tetraradicals and diradical

Calix[4]arenes constrained to the 1,3-alternate conformation and functionalized at the upper rim with four and two tert-butylnitroxides have been synthesized and characterized by X-ray crystallography, magnetic resonance (EPR and (1)H NMR) spectroscopy, and magnetic studies. The 1,3-alternate nitroxide tetraradical and diradical provide unique polyradical scaffolds for dissection of the through-bond and through-space intramolecular exchange couplings. In addition, detailed magnetic studies of the previously reported calix[4]arene nitroxide tetraradical, which possesses cone conformation in solution, reveal conformational dependence of exchange coupling. Through-bond coupling between the adjacent nitroxide radicals is mediated by the nitroxide-m-phenylene-CH(2)-m-phenylene-nitroxide coupling pathway, and through-space coupling is found between the diagonal nitroxide radicals at the conformationally constrained N...N distance of 5-6 A. Magnetic studies of the calix[4]arene polyradical scaffolds in frozen solutions show that the through-bond exchange coupling in the 1,3-alternate calix[4]arene tetraradical is antiferromagnetic, while that in cone calix[4]arene tetraradical is ferromagnetic. The through-space exchange couplings are antiferromagnetic in both cone and 1,3-alternate calix[4]arene tetraradical, as well as in the 1,3-alternate calix[4]arene diradical. The exchange coupling constants (|J/k|) are of the order of 1 K.     

25,26-Dialkoxycalix[4]arenes. Part 2: 1-Alkoxy-3-benzoyloxy route

Benzoylation of calix[4]arene monoalkyl ethers with benzoyl chloride yielded the corresponding 3-benzoates and/or 2,3-dibenzoates in different reaction conditions. A simple recrystallization process was able to isolate the 3-benzoates in good yield. In the presence of NaH as reaction base, the 1-alkoxy-3-benzoyloxycalixarenes were alkylated with active alkyl halides at proximal position and yielded the corresponding 1,2-dialkoxy derivatives. Basic hydrolysis of compounds afforded the expected 25,26-dialkoxycalix[4]arenes. For the less active alkyl halides, alkylation of 1-alkoxy-3-benzoyloxycalix[4]arenes afforded both the 1,2-dialkoxy derivatives and the benzoyl-migrated 1,3-dialkoxy derivatives. Only the highly symmetrical 1,3-diethoxy-2-benzoyloxycalix[4]arene was able to be isolated upon the deliberate recrystallization process. After basic hydrolysis of the dialkylated crude products, 25,26-dialkoxycalix[4]arenes were chromatographic separated.     

Ab initio and density functional studies of cooperative hydrogen bonding in calix[4]-and calix[6]arenes

The cone conformation of C ₄ symmetry is shown by the Hartree-Fock method (3-21G basis) to be the predominant conformer of calix[4]arene; the compressed cone of C ₂ symmetry is the major conformer of calix[6]arene. Using quantum chemical methods we calculated hydrogen bond cleavage energies for calix[4]-(ab initio and density functional methods) and calix[6]arene (ab initio), and also for the complex of calix[4]arene with carbon disulfide. These energies along with structural data point to the cooperative effect of hydrogen bonds. The results of these studies provided an explanation to the greater conformational lability of calix[6]arene compared with calix[4]arene molecules. It is also predicted that the nucleophilic substitution reaction involving calix[6]arene in the presence of weak bases and in aprotic solvents, as well as in the gas phase, will occur via diastereomeric transition states.     

25,26-Dialkoxycalix[4]arenes. Part 1: 25-Alkoxy-26,27-diacetoxy route

Acetylation of calix[4]arene 1,3-dialkyl ethers yielded the corresponding monoacetates. The ¹H NMR spectral analysis indicated that the products’ alkoxy moieties were ‘rotation restricted’. Acylation of calix[4]arene monoalkyl ethers with acetyl chloride yielded monoacetates and/or 2,3-diacetates in different reaction conditions. A simple recrystallization process was able to isolate 2,3-diacetates in good yield. The ¹H NMR spectra of the diacetylated products indicated that those compounds also possessed the ‘rotation restricted’ alkoxy moieties. In the presence of K₂CO₃ as reaction base, alkylation of 2,3-diacetates produced the acetyl-migrated 1,3-dialkyloxy derivatives. Basic hydrolysis of the acetyl-migrated compounds yielded the known 1,3-dialkoxycalix[4]arenes. In the presence of NaH as reaction base, 2,3-diacetates were alkylated with and without the acetyl-migration. For the highly reactive benzyl bromide and allyl bromide, the majority of alkylation proceeded without acetyl-migration. In the other alkyl halides, the products were the acetyl-migrated 1,3-dialkoxy derivatives along with less than one-fourth the amount of non-migrated 1,2-dialkoxy derivatives.     

Two organometallic fragments inclusioned in a 1,3-alternate calix[4]arene tetraphosphane: evidence for transition metal-arene interaction through the cavity

The preparation of an 1,3-alternate calix[4]arene tetraphosphane ligand, 25,26,27,28-tetrakis{2-(diphenylphosphino)ethoxy}calix[4]arene (4), is described. Ligand 4 is obtained in four steps in 17% overall yield. Reaction of 4 with AgBF4 produced the encapsulated two silver complex [Ag2{(P,P,P,P)-tetraphencalix[4]arene}](BF4)2. The solid-state structure shows that the encapsulated silver undergoes a substantial pi-interaction by two opposite arene rings. Rhodation of 4 employing [Rh(cot)2]BF4 yielded the encapsulated complex with a bent coordination mode. Two organometallic fragments inclusioned inside a 1,3-alternate calix[4]arene tetraphosphane was also achieved by the reaction of 4 with [PtH(PPh3)2 (thf)]+. Full characterization includes X-ray structural studies of compounds 4-6.     

Selectively formylated and bridged calix[6]arene derivatives at the upper rim

The strategy of bridging the anisole units at the upper rim of calix[6]arene has been applied to strain the conformations of calix[6]arene. Based on the selective formylation of the 1,3,5-tri-p-tert-butylcalix[6]arene, several new calix[6]arene derivatives with different 1,3-bridged chains or a 1,3,5-tripod bridge at the upper rim have been prepared with moderate yields. The ¹H NMR spectra indicate that these calix[6]arene derivatives adopt a cone conformation, which has also been confirmed by the theoretical calculation at AM1 level. X-ray crystal structure of 1,3,5-tripod bridged compound 5 discloses that the calix[6]arene host stands in a cone conformation with approximate C_3v symmetry, and that a methanol molecule is enclosed in its hydrophobic cavity and stabilized by multi hydrogen bonds.     

Hydrogen bonding patterns of calix[4]arenes with thiourea functionalities in solution and in the solid state

[structure: see text] We have synthesized a number of calix[4]arene derivatives presenting thiourea functional groups at their upper rims by the condensation of a 1,3-di(p-amino)calix[4]arene with alkyl isothiocyanates. Mono- and dithiourea-substituted calix[4]arenes were prepared selectively in good yields, and homocoupling of the former led to calix[4]arene dimers with a thiourea linker. X-ray crystallography revealed interesting intra- and intermolecular hydrogen bonding patterns. (1)H NMR data and computational studies also provided some insight into the hydrogen bonding patterns.     

1,3-Diketone Calix[4]arene Derivatives—A New Type of Versatile Ligands for Metal Complexes and Nanoparticles

The present review is aimed at highlighting outlooks for cyclophanic 1,3-diketones as a new type of versatile ligands and building blocks of the nanomaterial for sensing and bioimaging. Thus, the main synthetic routes for achieving the structural diversity of cyclophanic 1,3-diketones are discussed. The structural diversity is demonstrated by variation of both cyclophanic backbones (calix[4]arene, calix[4]resorcinarene and thiacalix[4]arene) and embedding of different substituents onto lower or upper macrocyclic rims. The structural features of the cyclophanic 1,3-diketones are correlated with their ability to form lanthanide complexes exhibiting both lanthanide-centered luminescence and magnetic relaxivity parameters convenient for contrast effect in magnetic resonance imaging (MRI). The revealed structure–property relationships and the applicability of facile one-pot transformation of the complexes to hydrophilic nanoparticles demonstrates the advantages of 1,3-diketone calix[4]arene ligands and their complexes in developing of nanomaterials for sensing and bioimaging.     

Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.     

Potassium Sensing Calix[4]arene Crown Ethers

1,3-Alternate calix[4]arene crown-5 (1) and corresponding biscrown-5 (2) were synthesized and the complexation behavior with alkali metal ions examined. For both 1 and 2, potassium ion was selectively extracted from aqueous phase into organic phase over other alkali metal ions based on two phase extraction experiment. The complexation ratio between calix[4]arene biscrown-5 (2), in which two crown cavities connect to the calix[4]arene framework by 1,3-alternate fashion and potassium metal ion is found to 1:1 by proton NMR spectroscopy and extraction equilibria. Association constants (logK_a) for 1 and 2 were determined to give 2.51 and 3.49, respectively.     

Preorganization of diglycolamides on the calix[4]arene platform and its effect on the extraction of Am(III)/Eu(III)

Different diglycolamide (DGA)-substituted calix[4]arene-based extractants were synthesized and evaluated for the extraction of Am(III) and Eu(III), representative trivalent actinide and lanthanide ions, respectively. On the narrow rim of the calix[4]arene platform, the DGA moiety was either 1,3-di- or tetrasubstituted with a varying spacer length between the oxygen and amide nitrogen atom. In addition, DGA groups were appended both to the wide rim and to both rims of calix[4]arenes and their efficiencies were compared for Am(III) and Eu(III) extraction at three different feed acidities. The extraction and separation efficiencies strongly depended on the N-alkyl substituent as well as the spacer length. 1,3-Di-DGA-substituted calix[4]arenes are inferior extractants to the corresponding tetra-DGA-substituted ones. Narrow rim DGA-functionalized derivatives resulted in high extraction efficiencies, while the wide rim DGA-functionalized calix[4]arenes showed practically no extraction.     

Synthetic and NMR Studies on Calix[n]Arene (n = 4,6,8) Triflates,Mesylates, and Tosylates

Abstract

The synthesis and full characterization of eight new calix[n]arene sulfonate esters including their conformational analysis were carried out. While p-tBucalix[6]arene and p-tBu-calix[8]arene esters are conformationally labile in the temperature interval of 25–100°C, p-tBu-calix[4]arene mono-and diesters were isolated as stable conformers at ambient temperature. Two 1,3-functionalised compounds of these derivatives, p-tert-butylcalix[4]arene ditriflate (5) and dimesylate (6) were shown unexpectedly high conformational stability up to 100°C by dynamic NMR measurements. The NMR measurements confirm the pinched-cone conformation for both derivatives. For the dealkylated calix[4]arene derivatives the partial cone conformer of the triesters have been obtained as major products in all cases.     

Synthesis of a glutaraldehyde derivative of calix[4]arene as a cross-linker reagent for lipase immobilization

This article describes the synthesis of a new calix[4]arene 1,3-distal glutaraldehyde derivative 4 as a cross-linker-reagent for immobilization of Candida rugosa lipase (CRL). p-tert-Butylcalix[4]arene 1,3-distal diaminoalkyl derivative (3) synthesized via aminolysis reaction of 5,11,17,23-tert-butyl-25,27-ethoxycarbonylmethoxy-26,28-hydroxycalix[4]arene (2) with 1,8-diaminooctane. Compound 3 was converted to its aldehyde derivative (4) by the treatment with glutaraldehyde solution. 4 was used in lipase immobilization in order to see the role of calix[4]arene binding site on the lipase activity and stability. It was observed that the immobilized lipase activity was maintained at levels exceeding 95% of its original activity after 40 min.     

Effect of the glutaraldehyde derivatives of Calix[n]arene as cross-linker reagents on lipase immobilization

Synthesis of the glutaraldehyde derivatives calix[n]arene (n = 4,6,8) (Calix[n]-GA) and using as cross-linkers for immobilization of Candida rugosa lipase (CRL) have been discussed in this paper. The amino functional calix[n]arene derivatives (Calix[n]-NH ₂) were synthesized via reduction of dinitrile, hexanitrile and octanitrile derivatives of calix[n]arenes. These amino functional calix[n]arene derivatives (Calix[n]-NH ₂) were converted to their aldehyde derivativatives with glutaraldehyde. The calix[n]arene derivatives were used in lipase immobilization in order to see the role of calix[n]arene binding site on the lipase activitiy and stability. The activity recovery of calix[n]arene-supported lipases (Calix[n]-CRL) based on the Calix[4]-CRL, Calix[6]-CRL and Calix[8]-CRL reaches to 53.5, 66.1 and 76.4%, respectively.