共查询到18条相似文献,搜索用时 401 毫秒
1.
2.
《应用力学学报》2016,(1)
基于已建立的弹性地基上不可伸长梁的非线性动力学模型,利用梁的量纲归一化运动方程和多尺度方法求得梁2次超谐共振的幅频响应方程和位移的二次近似解。进而,运用梁的幅频响应曲线对其超谐共振响应特性进行研究,同时分析了弹性地基模型、Winkler参数、外激励幅值、边界条件等对该共振响应的影响效应。结果表明:弹性地基模型中剪切参数的引入增大了梁2次超谐共振响应的幅值和多值区域;弹性地基Winkler参数的增加会抑制系统的共振响应,但同时会增加系统动力响应的软弹簧特性;在外激励幅值较小的情况下,系统共振响应未展现出明显的非线性特征;边界约束对弹性地基剪切参数作用于梁2次超谐共振响应的效应有显著影响,可在一定程度上改变系统响应幅值及多值区域。 相似文献
3.
4.
研究了含分数阶微分项的达芬(Duffing)振子的超谐与亚谐联合共振.采用平均法得到了系统的一阶近似解析解,提出了超、亚谐联合共振时等效线性阻尼和等效线性刚度的概念.建立了联合共振定常解幅频曲线的解析表达式,并对联合共振幅频响应的近似解析解和数值解进行了比较,二者吻合良好,证明了求解过程及近似解析解的正确性.然后,将等效线性阻尼和等效线性刚度的概念与传统整数阶系统进行比较,证明分数阶微分项不仅起着阻尼的作用同时还起着刚度的作用.最后,通过数值仿真研究了不同的分数阶微分项系数和阶次对联合共振幅频曲线多值性和跳跃现象的影响,并与单一频率下超谐共振或亚谐共振进行了对比.研究发现,分数阶微分项系数与阶次不仅影响着系统的响应幅值、共振频率,同时还对系统的周期解个数、发生区域面积、发生先后等有重要影响.并且,在不同的基本参数下该系统分别表现出单独超谐共振、单独亚谐共振以及超谐共振和亚谐共振同时存在的现象.这些结果对系统动力学特性的研究具有重要意义. 相似文献
5.
6.
为了研究温度场中非线性地基上矩形薄板受简谐激励的主共振-主参数共振问题,应用弹性力学理论建立其动力学方程,应用Galerkin方法将其转化为非线性振动方程.利用非线性振动的多尺度分析方法求得系统主共振-主参数共振的近似解,并进行数值计算.分析温度、地基系数、阻尼、几何参数、激励等对系统主共振-主参数共振的影响.得到了随参数变化响应曲线的变化规律. 相似文献
7.
以Duffing系统为研究对象,研究在多频激励下同时发生主共振和1/3次亚谐共振的动力学行为与稳定性.首先,通过多尺度法得到系统的近似解析解,利用数值方法检验近似程度,结果吻合良好,证明了求解过程和解析解的正确性.然后,从解析解中导出稳态响应的幅频方程和相频方程,从幅频曲线以及相频曲线中发现系统最多存在7个不同的周期解,这种多解现象可用于对系统状态进行切换.基于Lyapunov稳定性理论,得到联合共振定常解的稳定条件,利用该条件分析了系统的稳定性,并与Duffing系统的主共振和1/3次亚谐共振单独存在时比较.最后,通过数值方法分析了非线性项和外激励对系统动力学行为与稳定性的影响,发现了联合共振特有的现象:刚度软化时,非线性项不仅影响系统的响应幅值,同时还影响系统的多值性和稳定性;刚度硬化时,非线性项对系统的影响与单一频率下主共振和1/3次亚谐共振类似,仅影响系统的响应幅值.这些结果对Duffing系统动力学特性的研究具有重要意义. 相似文献
8.
《应用力学学报》2019,(6)
推导了考虑温度变化影响的悬索非线性运动微分方程,利用Galerkin法得到离散后的多自由度方程;考虑一阶正对称模态,以悬索同时发生主共振和1/3阶次谐波共振为例,利用多尺度法求解幅频响应方程组,并判断稳态解的稳定性;选取三组垂跨比及两组温度变化,基于幅频响应曲线和调谐相位曲线,探究温度变化影响下的主/次谐波联合共振响应。数值算例结果表明:主/次谐波联合共振时,系统响应变得更加复杂,同时展现出主共振和次谐波共振响应特性;温度变化会定性和定量地改变联合共振特性,改变系统振动的软/硬弹簧特性及程度;联合共振响应的幅值大小、相位和共振区间与温度变化密切相关;相同温度变化对联合共振响应的幅值和相位影响有差异,通过研究联合共振响应的相位,可以区分系统的多个稳态解。 相似文献
9.
以Duffing系统为研究对象,研究在多频激励下同时发生主共振和1/3次亚谐共振的动力学行为与稳定性.首先,通过多尺度法得到系统的近似解析解,利用数值方法检验近似程度,结果吻合良好,证明了求解过程和解析解的正确性.然后,从解析解中导出稳态响应的幅频方程和相频方程,从幅频曲线以及相频曲线中发现系统最多存在7个不同的周期解,这种多解现象可用于对系统状态进行切换.基于Lyapunov稳定性理论,得到联合共振定常解的稳定条件,利用该条件分析了系统的稳定性,并与Duffing系统的主共振和1/3次亚谐共振单独存在时比较.最后,通过数值方法分析了非线性项和外激励对系统动力学行为与稳定性的影响,发现了联合共振特有的现象:刚度软化时,非线性项不仅影响系统的响应幅值,同时还影响系统的多值性和稳定性;刚度硬化时,非线性项对系统的影响与单一频率下主共振和1/3次亚谐共振类似,仅影响系统的响应幅值.这些结果对Duffing系统动力学特性的研究具有重要意义. 相似文献
10.
11.
This paper addresses the static response of an infinite beam supported on a unilateral (tensionless) two-parameter Pasternak foundation and subjected to complex transverse loads, including self weight. The transfer displacement function method (TDFM) is employed to determine the initially unknown lengths that remain in contact. In contrast to a Winkler Foundation System (WFS), the lift-off points in a PFS (Pasternak Foundation System) are not necessarily at zero displacement but may be determined sequentially through considering the compatibility conditions at the junctions of contact and non-contact segments. After the response of the whole system including the beam and foundation is expressed through the displacement constants of the initial segment, the contact problem is reduced to two nonlinear algebraic equations with two unknowns. The foundation reactions and the internal actions of the beam may also be determined from the displacement response of the system. Two simple cases are solved to illustrate the influence of the foundation stiffness factors and finally, a third example of a beam with several contact segments is presented to demonstrate the application of the TDFM. 相似文献
12.
13.
In this study, stability and bimodal optimization of clamped beam elastically restrained against translation on one end subjected to a constant axially load are analyzed. The beam is positioned on elastic Winkler type foundation. The Euler method of adjacent equilibrium configuration is used in deriving the nonlinear governing equations. The critical load parameters, axial force and stiffness of foundation, are obtained for beam with the unit cross-sectional area.The shape of the beam stable against buckling that has minimal volume is determined by using Pontryagin’s maximum principle. The optimality conditions for the case of bimodal optimization are derived. The cross-sectional area for optimally designed beam is found from the solution of a nonlinear boundary value problem. New numerical results are obtained. A first integral (Hamiltonian) is used to monitor accuracy of integration. It is shown that there is the saving in material for the same buckling force. 相似文献
14.
A rotor- active magnetic bearing (AMB) system with a periodically time-varying stiffness subjected to multi- external, -parametric
and -tuned excitations is studied and solved. The method of multiple scales is applied to analyze the response of the two
modes of the system near the simultaneous sub-harmonic, super-harmonic and combined resonance case. The stability of the steady
state solution near this resonance case is determined and studied applying Lyapunov’s first method. Also, the system exhibits
many typical nonlinear behaviors including multi-valued solutions, jump phenomenon, softening nonlinearities. The effects
of the different parameters on the steady state solutions are investigated and discussed. Simulation results are achieved
using MATLAB 7.0 program. 相似文献
15.
Vibration of a finite Euler–Bernoulli beam, supported by non-linear viscoelastic foundation traversed by a moving load, is studied and the Galerkin method is used to discretize the non-linear partial differential equation of motion. Subsequently, the solution is obtained for different harmonics using the Multiple Scales Method (MSM) as one of the perturbation techniques. Free vibration of a beam on non-linear foundation is investigated and the effects of damping and non-linear stiffness of the foundation on the responses are examined. Internal-external resonance condition is then stated and the frequency responses of different harmonics are obtained by MSM. Different conditions of the external resonance are studied and a parametric study is carried out for each case. The effects of damping and non-linear stiffness of the foundation as well as the magnitude of the moving load on the frequency responses are investigated. Finally, a thorough local stability analysis is performed on the system. 相似文献
16.
The trivial equilibrium of a two-degree-of-freedom autonomous system may become unstable via a Hopf bifurcation of multiplicity two and give rise to oscillatory bifurcating solutions, due to presence of a time delay in the linear and nonlinear terms. The effect of external excitations on the dynamic behaviour of the corresponding non-autonomous system, after the Hopf bifurcation, is investigated based on the behaviour of solutions to the four-dimensional system of ordinary differential equations. The interaction between the Hopf bifurcating solutions and the high level excitations may induce a non-resonant or secondary resonance response, depending on the ratio of the frequency of bifurcating periodic motion to the frequency of external excitation. The first-order approximate periodic solutions for the non-resonant and super-harmonic resonance response are found to be in good agreement with those obtained by direct numerical integration of the delay differential equation. It is found that the non-resonant response may be either periodic or quasi-periodic. It is shown that the super-harmonic resonance response may exhibit periodic and quasi-periodic motions as well as a co-existence of two or three stable motions. 相似文献
17.
George C. Tsiatas 《Archive of Applied Mechanics (Ingenieur Archiv)》2014,84(5):615-623
In this paper, a new efficient method to evaluate the exact stiffness and mass matrices of a non-uniform Bernoulli–Euler beam resting on an elastic Winkler foundation is presented. The non-uniformity may result from variable cross-section and/or from inhomogeneous linearly elastic material. It is assumed that there is no abrupt variation in the cross-section of the beam so that the Euler–Bernoulli theory is valid. The method is based on the integration of the exact shape functions which are derived from the solution of the axial deformation problem of a non-uniform bar and the bending problem of a non-uniform beam which are both formulated in terms of the two displacement components. The governing differential equations are uncoupled with variable coefficients and are solved within the framework of the analog equation concept. According to this, the two differential equations with variable coefficients are replaced by two linear ones pertaining to the axial and transverse deformation of a substitute beam with unit axial and bending stiffness, respectively, under ideal load distributions. The key point of the method is the evaluation of the two ideal loads which in this work is achieved by approximating them by two polynomials. More specifically, the axial ideal load is approximated by a linear polynomial while the transverse one by a cubic polynomial. The numerical implementation of the method is simple, and the results are compared favorably to those obtained by exact solutions available in literature. 相似文献
18.
In this study, the mechanical buckling and free vibration of thick rectangular plates made of functionally graded materials (FGMs) resting on elastic foundation subjected to in-plane loading is considered. The third order shear deformation theory (TSDT) is employed to derive the governing equations. It is assumed that the material properties of FGM plates vary smoothly by distribution of power law across the plate thickness. The elastic foundation is modeled by the Winkler and two-parameter Pasternak type of elastic foundation. Based on the spline finite strip method, the fundamental equations for functionally graded plates are obtained by discretizing the plate into some finite strips. The results are achieved by the minimization of the total potential energy and solving the corresponding eigenvalue problem. The governing equations are solved for FGM plates buckling analysis and free vibration, separately. In addition, numerical results for FGM plates with different boundary conditions have been verified by comparing to the analytical solutions in the literature. Furthermore, the effects of different values of the foundation stiffness parameters on the response of the FGM plates are determined and discussed. 相似文献